We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
123,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
- Power supply ES 030-10 - Ulbrichtkugel ISP 80 - Built in 1999 - fully functional - Visit possible by appointment
used
Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...
used
Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide
used
Thread cutting gear Pick-up device partially revised
used
Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide
used
Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer
used
Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle
used
Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...
used
Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Sowiabeb - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide
used
Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...
used
Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past
used
Index HE 25 with rod feed hydraulically controlled with long turning device
new
20-90-542 Multeosill Drilling Machine WOODLAND MACHINERY (new) Type: BM21S Number of shafts 21 Adjustable drilling angle Working width 700 mm Table Dimensions 1000 × 900 mm Additional support Ruler 3000 mm Number of Pressers 2 Engine power 1.5 kW 380 V 50 Hz Required Air Pressure 8 bar Drilling Step 32 mm Weight 150 kg Transport Dimensions 1200x1000x1300 mm
new
CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...
used
Spiral kneader Boku SK 240 A Basic overhaul basic refurbished spiral kneader Boku type SP 240 A with digital Steuerung.Es are 2 boilers in stainless steel with trolley. The kneader is suitable for a maximum of 240 kg of dough or for a maximum of 150 kg of flour.The machine has 2 speeds (slow and fast) and 2 Mixing time zones. Optionally, you can get the machine with a tipper and up to 4 boilers. Type: SK 240 AS CS for maximum 240kg of dough or for max. 150 kg flour 2 automatic timers 2 courses slow and fast Stainless steel spiral with 2 stainless steel boilers optional lye with up to 4 boilers Machine is overhauled and repainted
used
Properties: Manufacturer: Interroll Condition: good (used) Clamping length: 630mm Roll length: 610mm Roll diameter: 60mm Rollers with spring axle Material: Steel Stock: 39 pieces Price per piece Tailor-made logistics for your intralogistics We are your competent contact for roller conveyors, belt conveyors, schraegfoerderers or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and the local conditions. Take advantage of our long-running experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow and ...
used
Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: WR 600 Included in delivery are: 01x pallet rack traverse, second choice Material colour: RAL 5010 Gentian blue Box profile: 60 x 40 x 1.25 mm Traverse type: TR4-088-064-25CEL QV71|71|3 Clear width: 880 mm 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
used
Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: WR 600 Included in delivery are: 01x pallet rack traverse, second choice Material colour: RAL 5010 Gentian blue Box profile: 60 x 40 x 1.25 mm Traverse type: TR4-200-064-25CEL QV71|71|3 clear width: 2,000 mm 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
used
Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: WR 600 Included in delivery are: 01x pallet rack traverse, second choice Material colour: RAL 5010 Gentian blue Box profile: 60 x 40 x 1.25 mm Traverse type: TR4-240-064-25CEL QV71|71|3 Clear width: 2,400 mm 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
new
TO WHOM IT MAY CONCERN; WE VE NEW UNUSED GENUINE SPARE PARTS OF MAN TURBO NR 34S AT OUR STOCK. NEW SET OF SPARE PARTS 1159500-0138 2PCS NEW SET OF SPARE PARTS 1191468 1PCS NEW BEARING BUSH 1191468 7PCS NEW BEARING BUSH 1151768-0442 1PCS NEW NOOZLE RING IMO 2475 128.05cm3 2PCS NEW LABYRINTH RING 1191468 2PCS NEW LOCATING BEARING 1191468 2PCS NEW LOCATING BEARING 517002 1PCS ALL PARTS EX STOCK LOCATED AT IZMIR TURKEY. IF YOU VE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US .
used
Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
new
Item nr.: 907572-0000 Counter Omron for Tetra Pak machines Omron high speed counter unit, C200H-CT001-V!
new
Trackball with connection cable for Ultimax control Replacement for Hurco Ultimax 4 , Ultimax 3 Easy to change, ready to ship New
used
Head circuit for OASE spiral kneaders of type SPK125/150/AE for spiral kneaders with soil emptying or center emptying
used
with rod pipe
used
Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t
used
various conductivity meters
used
Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.
used
Spiral kneader Gostol with 2 extendable stainless steel boilers We have 2 kneading machine and 4 boilers in the warehouse. -Stainless steel spiral -Stainless steel boiler -2 speeds -2 timers automatic
used
Table milling machine Comag Technical data • Speed (rPM): 2500/4500/6000 • Machine is in working condition
used
Diosna SP 240 A DL with 3 bowls -Machine after overhaul - New bearings, new V-belts, new switches, new buttons, - 2 speed - 2 o'clock for 30 minutes - 3 boilers - For 240 kg dough
used
With feed and vacuum pump
used
--------------------
NIP adjustment screw Drawing No. 14204-1168D1
NIP adjustment screw with more grooves
Gearbox TSA 031 370-1-07 Manufacturer VSS Kosice for mixing mill Buzuluk 660x2100 mm , Type 14821 for right side i = 10:1
used
Time timer time relay for Diosna Kemper Boku and other kneading machines Timer timer relays for Diosna, Kemper, Boku and other kneading machines that are watches including B7 socket for easy installation. Schleicher DZE12-SL suitable for Diosna Spiral Kneader lifting kneaders and other kneading machines suitable for Kemper Spiral Kneter lifting kneaders and other kneading machines suitable for Boku spiral kneaders and kneading machines suitable also for other kneading machines t: 12min AC 230V 50/60 Hz
Bull gear Drawing No. 14272 -161 C1 z = 113
Drive 210 kW / 985 rpm, 380 V, with starter
Covers for bull gear and friction wheels
Guided from bronze Drawing No. 05714 -227D1
used
Used spiral kneader KEMPER, type: ST 75 A -Refurbished - for 120 kg of dough or 75 kg flour - incl. 2 extendable tank wagons - Condition: Very good, ready for immediate use - 6 months warranty Sightseeing and test run are possible by arrangement.
used
Complete Acrylic mIll machinery for sale: NSC Schlumberger & Cie. 1. Breaking Converter - ТВ-10, year 1999 - 1 piece. 2. Breaking-mixing machine R5GC15, year 1999 – 1 piece. 3. Drawing machine GC15656RE, year 1999 – 1 piece. 4. Drawing machine GC15683, year 2001 - 1 piece. 5. Drawing machine GC15698, year 2001 – 1 piece. 6. Roving machine FM-20, year 2003 - 1 piece. 7. Spinning-winding machine with steaming Zinser Germany Model 319LSL, year 1985 linked with Murata 7-V, year 1997. 2 pieces. All machines are in excellent working condition. Machines are on floor and all spare parts goes with the machines Sliver cans are available free of charges
used
Key data: 500 , 350 , 300
Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler
used
Machine type: Table milling machine Manufacturer: ELEKTRA BECKUM Model: TF 100 M 2.8 DN Built: 1998 Condition: ready for use Offer type: used machine Technical data: Table: 520 X 420 mm Speeds: 4000/6000/7500 rpm. Drive: 1.8 KW Comment: with an additional horizontal sawing unit (1.5 kW) for Two-sided machining with roller conveyor and lateral material guidance, everything can be easily dismantled Weight: 150 kg
new
In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg
used
Hobart high speed steamer Model: 305GB Serial: 97-0215-148 2015, high speed steamer cooks 42 portions of salmon in 1 minute or 66 portions of tenderstem broccoli in 30seconds, offering exceptional accelerated cooking techniques, LED display, auto defrost, 27Kw, on mobile tray cooling rack, 3Ph
used
Spiral kneading dough machine Kemper model: SP 150 ALH with 2 extendable tank wagons Kneading machine for max. 250 kg dough Cover hood with protective circuit with 2 timers and 2 gears Lifting and lowering via control Hand and automatic operation E-plant NEW DGUV V3 tested Connection 400V, 50 AMP, 63A-CEE plug Used machine overhauled Visit our Milbrandt Outlet with show bakery and many bakery machines!
new
Dough kneading machine Model: MBT SP 6 Protective grille with shutdown Table machine Spiral kneader for max. 6 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 220V Dough machine NEW Come to our Milbrandt Outlet with show backroom and many appliances!
new
Dough kneading machine Model: MBT SP 6 Protective grille with shutdown Table machine Spiral kneader for max. 6 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 220V, 400 watts Dough machine NEW with 12 months warranty Come to our Milbrandt Outlet with Schbackstube and many devices!