board cutting used for sale

: neu : Bulgarien : 58370 € : 1103.19 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 3 : 20 - 100, 80 - 400, 400 - U/Min : 120 : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3600 mm : 1500 mm : 1650 mm : 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface ...

: neu : Bulgarien : 96240 € : 1818.94 € : 860 mm : 3000 mm : 430 mm : 135 mm : 620 mm : 560 mm : 11 : 140 MK : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 240 : 435 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low vol ...

: neu : Bulgarien : 89440 € : 1690.42 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 MK : 3 : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low volta ...

: neu : Bulgarien : 56920 € : 1075.79 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 MK : 21 : 12,5 - 1250 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 90 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 53520,00 turning length1.500 mm € 54880,00 turning length3.000 mm € 61360,00 turnin ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160788 € : 3038.89 € : 3 kW : - : 12 mm : 6 mm : 6 mm : 3 mm : 6 mm : 26,5 kW : 250 mm : 16 mm : 160 x 160 mm : 200 x 150 mm : 6000 mm : 58 kg/m : +/- 0,2 mm : +/- 0,05 mm : rund, quadratisch, rechte : 40 m/min : 94 m/min : 30 m/min : 510 °/s The machine consists of the following components: - Encapsulated cutting room with protective glazing - CNC graphic control with touchscreen - Laser source Brilase 3 kW Premium incl. chiller - Cutting head with automatic focus adjustment - manual loading -manual unloading table 3 m - Positioning laser - Central lubrication - slug car - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Suction unit with filters Semi-automatic loading system Manual unloading table 6 m with conveyer Durma cloud license Lasersources with 4 or 6 kW on request The data for this ad was cr ...

: neu : Bulgarien : 64180 € : 1213 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 MK : 3 : 16 - 63, 63 - 250, 315 - U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 060 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm € 60780,00 turning length1.500 mm � ...

: neu : Bulgarien : 126650 € : 2393.69 € : 890 mm : 3000 mm : 400 mm : 155 mm : 490 mm : 700 mm : 15 : 160 MK : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 111610,00 turnin ...

AGIE CHARMILLES ROBOFIL 2030 SI ist eine Drahterodiermaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Tisch 560x440 mm; max Werkstück 1130x510x260 mm; Tischbelastung 500 kg; Verfahrwege X 318 mm, Y 218 mm, Z 114 mm; U/V Achsen ±48 mm; Konischschneiden ±30/65°. Technische Daten: Drahtdurchmesser ab 0,1 mm (oberer Wert nicht angegeben); Drahtvorschub bis 15 m/min; max Spulengewicht 16 kg; Abtragsleistung max 300 mm2/min; Dielektrikum 240 L; Leergewicht 4400 kg; Anschluss 3x380 V 50 Hz; Gesamtleistung 12 kVA; Maschinengrösse 3700x2600x2300 mm; Gesamtgewicht ca. 4500 kg. Zubehör: automatische Drahteinfädelung; Aufspannset 3 Stk.; EROWA Palettenwechselsystem 30 Pos.; 3 Werkstückträger. Erreicht enge Toleranzen; typisch für Automotive, Luftfahrt, Uhrenindustrie, Medizintechnik und Werkzeugbau Technische Daten ohne Gewähr

AGIE CHARMILLES ROBOFIL 2020SI ist eine Drahterodiermaschine mit hoher Präzision, ausgelegt für beste Genauigkeit und Zuverlässigkeit. Arbeitsmöglichkeiten: größte Werkstückabmessungen L 900 × B 520 × H 270 mm; max. Werkstückgewicht auf dem Tisch 500 kg; Verfahrswege X 320 mm, Y 220 mm, Z 270 mm; konisches Schneiden ±30°; Drahtdurchmesser ab 0,25 mm. Hauptdaten: Maschinenabmessungen L 3400 × B 2400 × H 2300 mm. Ermöglicht enge Toleranzen; typisch für Automotive, Uhrmacherei, Werkzeugbau, Luft- und Raumfahrt und Medizintechnik Technische Daten ohne Gewähr

FANUC Robocut Alpha 0C ist eine Drahterodiermaschine, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Werkstücke bis L650×B420×H180 mm, Tischbelastung max. 250 kg; Verfahrwege X320 Y220 Z180 mm, U120 V120 mm; Kegelschnitt ±30°; Draht ab 0,1 mm; Spule max. 6 kg. Technische Daten: Eilgang 900 mm/min, Gesamtleistung 11 kVA, Dielektrikum 390 l, Anschluss 3×400 V 50 Hz; Maschinengewicht ~1500 kg; Abmessungen L1800×B1600×H2000 mm. Zubehör: Lampe, RS232-Schnittstelle. Erreicht enge Toleranzen; Einsatz in Automotive, Luftfahrt, Medizintechnik, Uhrenindustrie und Formenbau. Technische Daten ohne Gewähr

HABEGGER Grignoteuse meuleuse ist eine Nage- und Schermaschine (Nibbling und Shearing), ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Angaben zu Arbeitskapazitäten sind in den vorliegenden Informationen nicht enthalten. Technische Daten wie Drehzahlen, Verfahrwege, Leistung oder Abmessungen wurden nicht angegeben. Entwickelt, um enge Toleranzen zu erreichen und für Anwendungen, die präzise Bauteilfertigung erfordern Technische Daten ohne Gewähr

FANUC Robocut C 600 iA ist eine Drahterodiermaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Tisch 600×400 mm; max Werkstück 1050×820×300 mm; Tischlast 1000 kg; Verfahrwege X600 Y400 Z310 U200 V200; Draht ab 0,1 mm. Anschluss 50 Hz 3x 400 V; Gesamtleistung 11 kVA; Gewicht ~1500 kg; Abmessungen 1800×1600×2000 mm. Zubehör: Lampe, automatische Drahteinfädelung, Flüssigkeitskühlung Daikin, automatische Schiebetür, Glasmassstäbe X,Y, rotierende Spindel Hirschmann H80R.MNXF. Erreicht enge Toleranzen; Branchen: Automobil, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

: neu : Bulgarien : 114970 € : 2172.93 € : 890 mm : 3000 mm : 400 mm : 155 mm : 490 mm : 700 mm : 15 : 160 MK : 24 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 22 kW : 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 100120,00 turning length2.000 mm € 103850,00 turning length4.000 mm € 123510,00 turning length5. ...

: neu : Bulgarien : 81780 € : 1545.64 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 MK : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: t ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 230188 € : 3 kW : Wechseltisch : 16 mm : 8 mm : 8 mm : 5 mm : 8 mm : 27,9 (mit Absaugung) kW : 4100 x 2070 mm : 4100 mm : 2070 mm : 125 mm : 4064 x 2032 mm : 240 (für 3 - 12 kW) / 400 kg/m² : 3900 (für 3 - 12 kW) / 64 kg : 100 m/min : 100 m/min : 141 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm : 32 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) ...

KIMLA POWERCUT LF 1530 6 kW fiber laser was built in 2018 in Poland by POLCOM Przemysław Kimla. The machine is designed for the precision cutting of sheet metal with maximum dimensions of 3050 x 1550 mm. The combination of proven technical solutions with reliable components makes the KIMLA POWERCUT LF 1530 an excellent solution for both unit and series production. The cutting process utilises a stable fibre-optic beam generated by a high-performance 6 kW IPG laser source. The PRECITEC cutting head, equipped with an advanced focusing lens system, ensures optimal laser beam geometry for various types of materials. This solution enables very smooth and even edges on the workpieces. To increase production efficiency and minimise downtime, the POWERCUT LF 1530 laser cutting machine is equipped with an automatic pallet exchange system. This system enables simultaneous loading and unload ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 188488 € : 3562.42 € : 3 kW : Wechseltisch : 16 mm : 8 mm : 8 mm : 5 mm : 8 mm : 26,4 (mit Absaugung) kW : 3100 x 1525 mm : 3100 mm : 1525 mm : 125 mm : 3084 x 1524 mm : 240 (für 3 - 12 kW) / 400 kg/m² : 2200 (für 3 - 12kW) / 360 kg : 100 m/min : 100 m/min : 141 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm : 25 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unlo ...

A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. ...

: 0400 mm : 246 mm : 1250 mm : 195 mm : 54 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An ARISTO flatbed cutting and routing system with MultiHead IV, HF Routing Device, color camera and ARISTOprojection is offered. Cutting width: 2300mm, static repeatability: +/-0.08mm, max. material clearance thickness: 55mm, drive system: digital AC servo motors, data format: HPGL compatible, interface: RS232C/V.24, transmission speed: 38400baud, vacuum system: adjustable matrix vacuum zones. 2) MultiHead IV type 4021/OT.M.P. IV-1, electrically oscillating tool axis, max. pressure: 180N at 6bar, integrated laser pointer, color camera with AutomaticEye registration system, tool head dimensions W/H/D: 166mm/390mm/330mm, weight: approx. 8.5kg. 3) HF Routing Device for spindles 4040 DC/4040 DC-S, max. speed: 50000rpm/60000rpm, power: max. 800W/1000W, Z-axis stroke: 50mm, collet range: 1.5mm-6.35mm. 4) ARISTOprojection for 1:1 projection of the contours onto the working area. Machine was reg ...

This 3-axis TRUMPF TruLaser 5030 fiber L76 FMC was manufactured in 2022. It features a working format of 3,000 x 1,500 mm and a powerful 6000W solid-state disk laser. The machine includes an automatic longitudinal pallet changer and advanced cutting capabilities, such as adaptive lens systems and automatic nozzle changers. If you are looking to get high-quality fiber laser cutting capabilities, consider the TRUMPF TruLaser 5030 fiber L76 FMC machine we have for sale. Contact us for further details.

Band Knife Cutting Machine R1150 The KTK PROFI band knife is a high-performance system for precise cutting of various textile elements such as: - Fabrics - Knitwear - coated and impregnated fabrics - Insulation materials - Upholstery foam Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen

- TouchScreen - Air table - Side table with air right / left - RA2 jogger with air and smooth out roller - Baumann Lift - spare knife

- Color display - Program - Air table - Resopal side table left+right - Jogging table with air - Spare knife

Hartmann Automatic Slicer SL-25 - working condition very good,

Bystronic Byspeed 3015 Bylaser 5200 ARC Control: ByVision Suction Donaldson Car Charge-Discharge System Auction-ID: A7-32339-2

Manufacturer: Barsanti Type of machine: Tile cutting line - Slab material: Marble and Granite - Slab length max: 3500mm - Slab width max: 2100mm - Slab thickness max: 50mm - Tile size min: 300mm x 300mm - Tile size max: To slab size - Tile thickness max: 50mm - Production capacity: Approx. 1 slab per minute - Cutting method: Cut slabs in one pass or strip by strip - Overall length of line: 36m - Main components and their function - Automatic Slab Loader: loads slabs into the line - Feed conveyor 1: conveys slabs into the line - Pedestrian Bridge 1: walkway across the line - Feed conveyor 2: conveys slabs toward the long cut saw - Long cut belt conveyor: conveys slabs through the long cut process - Long cut bridge saw: 7 blades with electronic positioning, performs the long cut - Side waste breaker: breaks off side waste material - Side waste conveyor: conveys away side waste material - ...

Key data: 140 mm

A Weiler Matador lathe is being sold. Machine comes from an inclusion workshop and has been regularly serviced. Prris is net plus VAT Loading facilities available. Article location Nuremberg

used bread slicer Treif Diskus 400+, Masch.-Nr. 607011.189985.120963, 50 Hz, 400 V, 0.9 kW, 2.25 / 10 A, 1.22 HP, cleaned, inspected and tested, works perfectly, weight 195 kg, year of manufacture 2014

Trumpf TruLaser 3030 fiber L95 Laserschneidmaschine (2023) Hersteller: Trumpf Typ: TruLaser 3030 fiber L95 Laserschneidmaschine Baujahr: 2023 Zustand: gebraucht, sehr gut, in Produktion Einschaltstunden: 11.900h Laser Strahlstunden: 2100h Geschlossener Maschinenrahmen Bewegungseinheit zur hochgenauen Bearbeitung Gantry-Antrieb in Kombination mit Lineardirektantrieben Kühlaggregat für Maschine und Laser (Wasser-Luft) Längsförderband Arbeitsraumbeleuchtung Positionslaserdiode Automatische Düsenreinigung Integrierte Schaltschränke Integrierter Schrank Geschlossene Strahlführung per Laserlichtkabel (LLK) Sprüheinrichtung Transport- und Montagevorrichtung Maschinenstatusleuchte Maschine bis 45 °C Umgebungstemperatur TRUMPF Laser Anregung über Pumpdioden Laserleistungssteuerung Schneideinheit Universalschneideinheit mit adaptivem Linsensystem Schutzglas On ...

AJAN SHP 130 plasma cutting machine was built in 2021 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd. Şti. The machine has been regularly serviced. In 2024, the SCT260 torch was replaced with a new one. The AJAN SHP 130 is designed for the precision cutting of sheet metal with a maximum thickness of 30 mm. Plasma cutting is performed using a reliable torch in accordance with a pre-programmed cutting programme. The plasma source ensures high energy efficiency and stable operating parameters, even during intensive use. The work table with a length of 3000 mm and a width of 2000 mm is equipped with an integrated fume extraction system, which effectively removes contaminants generated during cutting, improving operator comfort and safety. The plasma cutting machine is controlled by an advanced CNC controller with an intuitive interface. The machine operator also has at the dispo ...

Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Hersteller: Trumpf Typ: TruMatic 6000 FMC -1300 Baujahr: 2006 Zustand: gebraucht, sehr gut. regelmässig von Trumpf gewartet. Maschine ist unter Strom und im Einsatz. Betriebsstunden NC-Stunden: 70.305h Strahl-Ein Stunden: 17.217h Steurung: Siemens Sinumerik 840 D Stanzkraft: 220KN Laserleistung: 2700W Arbeitsbereich Laserbetrieb ca.: 2585 x 1280 mm Arbeitsbereich Stanzbetrieb ca.: 2585 x 1370 mm Max. Blechdicke ca.: 8 mm Auflagetische Bürstentische CE-Kennzeichnung Standardausstattung: Stabiler, gut zugänglicher C-Rahmen Koordinatenfürhung mit integriertem Linearmagazin, 21 Plätze für Werkzeuge und Spannpratzen 1 Spannpratzen Wartungsfreie Drehstrom Servomotoren Teilerutsche 500 x 500 mm (sensorüberwacht) HI-LAS Hochdruckschneiden TRUMPF Laser: CO2-Laser TLF 2700 Hochfrequenzanregung Lasersteuerung T ...

Mazak Optiplex Nexus 3015 Fiber 3KW Laserschneidmaschine Hersteller: Mazak Typ: Optiplex Nexus 3015 Fiber 3KW Baujahr: 2017 Zustand: Sehr gut, unter Strom Betriebsstunden: Laser: 11.282h Strahl: 5.607h Leistung: 3KW CNC Steuerung: MAZATROL PREVIEW 3 Gewicht: 15500 kg Maße: 8.490mm x 3.485mm x 2.010mm Achsenverfahrweg: 3.100mm x 1.580mm x 110mm ALLGEMEINE MASCHINENOPTIONEN ? Automatische Kalibriereinrichtung ? Fokuslageneinstellung ? Düsenreinigungsbürste ? Sammelbehälter für Materialausschuss ? Transformator für den europäischen Markt ? Protection Window für Multi-Control Schneidkopf ? Programmierfunktion an der Steuerung über Festprogramme ? Schneidtafel Lagenerkennung ? 1 Satz Justierwerkzeuge ? Maschinenfüße / Nivelliert Schuhe ? Berührungslose Höhenabtastung mit Wiederholfunktion ? manuelle Werkstückklemmung ? Vorbereitung für 3kW Resonator  ...

Mazak Optiplex Nexus 3015 Fiber 4KW Laserschneidmaschine Hersteller: Yamazaki Mazak Corporation Typ: Optiplex Nexus 3015 Fiber 4KW Baujahr: 12/2016 Zustand: gebraucht, sehr gut, unter Strom Verfügbarkeit: ab Juni 2023 Betriebsstunden: Zeit CNC AN 16.276h Zeit Laser AN 15.653h Zeit Automatik Betrieb 11.096h Schneidzeit 10.964h Gesamtschneidzeit 7.365h CNC Steuerung: MAZATROL PREVIEW 3 Gewicht: 12800 kg Leistungsbedarf: 57 kVA. Maße: 8.490mm x 3.485mm x 2.010mm Achsenverfahrweg: 3.100mm x 1.580mm x 110mm ALLGEMEINE MASCHINENOPTIONEN 1 Satz Justierwerkzeuge Auflagerost (Abstand der Stege 100mm) Automatische Kalibriereinrichtung Berührungslose Höhenabtastung mit Wiederholfunktion Düsenreinigungsbürste Fokuslageneinstellung manuelle Werkstückklemmung Maschinenfüße / Nivelierschuhe Maschinenstatus Anzeigeleuchte NC-Überwachung für Schutzgasdruck ohne Reso ...

Mazak Optiplex 3015 Fiber 4KW Laserschneidmaschine Hersteller: Yamazaki Mazak Corporation Typ: Optiplex 3015 Fiber 4KW Baujahr: 05/2016 Zustand: gebraucht, sehr gut Betriebsstunden: Zeit CNC AN 29.999h Zeit Laser AN 15.653h Zeit Automatik Betrieb 11.839h Schneidzeit 28.708h Gesamtschneidzeit 6.665h CNC Steuerung: MAZATROL PREVIEW 3 Gewicht: 15000 kg Verfahrweg: 3.100mm x 1.580mm x 110mm Leistungsbedarf: 54 kVA. ALLGEMEINE MASCHINENOPTIONEN 1 Satz Justierwerkzeuge Auflagerost (Abstand der Stege 100mm) Automatische Kalibriereinrichtung Berührungslose Höhenabtastung mit Wiederholfunktion Düsenreinigungsbürste Fokuslageneinstellung manuelle Werkstückklemmung Maschinenfüße / Nivelierschuhe Maschinenstatus Anzeigeleuchte NC-Überwachung für Schutzgasdruck ohne Resonator Programmierfunktion an der Steuerung über Festprogramme Sammelbehälter für Materialaus ...

turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm turning length: 1000 mm total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,511,8 m Training Machine - First-Hand Features: 3-axis digital display 3-jaw chuck 4-jaw chuck Collet chuck Active chuck guard Cover for lead and feed spindles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAX DIAM 250 ,MAX MODUL 5

cut-off saw: 3 KW Spindle diameter: 50 mm Spindle length: 300 mm Number of tools: variabel St. Control: CNC Dimensions (L/W/H): 2500x1700x2100 mm weight: 1700 kg HABERKORN - FZS-2 Electronic Slotting Machine with Stepless Slotting Spindles and Automatic Roller Table ---------------------------------------------- Crosscut Saw --------- Spindle Positioned at the Top Three-Phase Motor 3 KW Spindle Diameter 30 mm Speed 2800 rpm Saw Blade Diameter 400 mm Automatic Brake with Speed Monitoring Stepless Saw Positioning with Siko Display Guard and Extractor Hood with 100 mm Diameter Extractor Nozzle 2 Slotting Spindles 50 mm Diameter ----------------------------------- Power 2 x 7.5 KW Speed 4200 rpm Spindle Diameter 50 mm Max. Tool Diameter Approx. 360 mm Usable Length 300 mm Both slotting spindles can be positioned via ball screw Freely programmable 19 programs, display with function keys  ...

IMPORTANT: If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes transport For sale is a powerful and reliable CO2 laser cutting machine from the manufacturer Yamazaki Mazak. The machine was built in 2007 and therefore belongs to one of the more mature generations of this series. Laser power: 1,800 watts Weight: approx. 12,500 kg Included in the scope of delivery is the Donaldson Torit DCE extraction system/filter unit. The plant is currently still in operation. Video on request.

Key data: 500 mm, 350 mm, 300 mm

Technical data: Manufacturer: Mitsubishi Type: FA20 S Advance Year of Make: 2012 Control: Mitsubishi Advance Travel distances X/Y/Z: X 500 mm, Y 350 mm, Z 300 mm Travel U/V: +/- 75 mm Feed rate in X/Y/Z: 1,300 mm/min Conical angle at workpiece width: 15° Max. workpiece dimensions: 1,050 x 800 x 295 mm Max. workpiece weight: 1,500 kg Wire diameter: 0.07 – 0.3 mm Condition Condition: Used Functional: Tested and fully functional

turning diameter: 1.300 mm turning length: 3.000 mm control: FAGOR 8055 TC/C swing diameter over slide transversal: 940 mm feeds: X /Z 8.000 mm/min c-axis: Inkl. speeds:: 0 - 800 u/min transmission ratio: 4 spindle nose: DIN-55026-B11 : 46 kw spindle passage: 104 mm max. workpiece weight between centres: 13.000 kg chip conveyor: Inkl. total power requirement: 50 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7.925 x 2980 x 2585 m Turret positions 8 Turret type VDI 50 (Ø 470 mm) Driven tool power 5.5 kW Tailstock Tailstock quill diameter 180 mm Tailstock quill stroke 300 mm Additional equipment 3-jaw universal chuck Ø 900 mm 3-point steady rest Ø 750 mm 3-point steady rest Ø 400 mm 2 axial driven tool holders 1 radial driven tool holder 20 VDI 50 tool holders Air-conditioning unit for electrical cabinet Portable handwheel High-pressure coolant  ...

Wire EDM Machine Charmilles FI 240 SP BJ 2008

AJAN SHP 130 plasma cutting machine was built in 2017 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd. Şti. The machine has been used regularly and has a new plasma torch. The AJAN SHP 130 is used for precision cutting of sheet metal in both unit and series production. Cutting is performed automatically on a 3000 x 2000 mm work table, according to a previously prepared program. The stable plasma arc, generated by a high-performance PG 130 A source, ensures efficient cutting and maintains optimal operating parameters even during intensive use. Contaminants generated during machining are effectively removed by an extraction system, which increases operator safety and comfort. All this is complemented by an intuitive CNC controller, which facilitates the preparation of cutting programmes and the operation of the machine. This makes the AJAN SHP plasma cutting machine an excellent s ...

ZBUS YUN 3000-2 plasma-gas cutting machine was built in 2001 in Poland by Zakład Budowy Urządzeń Spawalniczych ZBUS Sp. z o.o. The machine is designed for the precise cutting of large-sized sheet metals with a maximum length of 12 metres and a thickness of 150 mm. The process is performed using two oxy-fuel torches and a plasma torch. The use of both cutting methods enables the flexible adaptation of the machine to current production requirements. As a result, the ZBUS YUN 3000-2 is ideal for the production of steel components for various industries. The YUN 3000-2 plasma-gas cutting machine is distinguished by its stable, open design, which ensures easy access to the work space from all sides. The plasma torch is mounted in an IHT MSX750ARC support, responsible for its precise guidance and automatic position adjustment relative to the workpiece. The plasma arc is generated by a ef ...

CNC Portal Flame Cutting Machine Manufacturer: Messer Type: MultiTherm Eco 3600 Year of Make: 2021 CNC Control: Global Control Track width: 3,600 mm Work tables: 2,300 x 6,200 mm 4 oxy-fuel burners type ALFA MS 4452/250 Cutting thickness: max. 150mm Bevel cutting possible Automatic gas adjustment (OmniFlow) for cutting oxygen (max. 15bar) Extraction system: Keller dry separator type Vario 2 Software: OmniWin2021

Lg.Nr. 26208 Technical data: - Center height 120 mm - Center width 450 mm - Largest circulation – Ø over bed 250 mm - Spindle bore 23 mm - Spindle mount with threaded nose DIN 55027 - Mounting cone of the tailstock quill MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - Flat 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Space requirement approx. W 1200 x H 1250 x D 650 mm - Weight approx. 700 kg - with: - 3-jaw chuck, - Quick-change steel holder - Moving grain tips - Separate tool cabinet with various accessories

turning diameter over bed: 320 mm turning diameter over slide rest: 180 mm turning length: 1000 mm turning diameter in the gap: 460 mm turning speeds: 70 -2000 U/min centre height: 160 mm spindle bore: 27 mm total power requirement: 2,0 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,8 x 1,2 x 1,6 m Centre lathe (lead-screw and feed-rod lathe) - 160 mm 3-jaw chuck - Faceplate - Spare jaws - Quick-change tool post (base unit) - 3 tool holders - 2 steadies - Live centre - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.