board cutting used for sale

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - ...

turning length: 800 mm turning diameter: 280 mm turning diameter over slide rest: 150 mm spindle bore: 42.0 mm tailstock quill taper MT: 3 MK bed width: 208 mm turning speeds: 42 - 2022 U/min spindle taper: DIN 55027/5 quill stroke: 90.0 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 750 kg range L-W-H: 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, w ...

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip spla ...

turning length: 1500 mm turning diameter: 460 mm swing diameter over bed slide: 270 mm turning dia. in gap: 690 mm spindle bore: 80.0 mm turning speeds: 25 - 1700 U/min bed width: 300 mm spindle taper: DIN 55029 D 1-8 taper in tailstock: 4 MK quill travel: 130 mm total power requirement: 5.5 kW weight of the machine ca.: 1845 kg. range L-W-H: 2750 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - ...

table length: 3000 mm table width: 1500 mm burner heads: 1 Control: CNC workpiece weight: 900 kg traversing speed: 91 m/min dimensions of the machine ca.: 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling  ...

turning diameter over bed: 340 mm turning diameter over slide rest: 260 mm turning length: 700 mm spindle bore: 48 mm spindle turning speed range: 25 - 2000 U/min spindle nose: DIN 55027 KK 5 voltage: 380 Volt total power requirement: 2,2/4,4 kW weight of the machine ca.: 1000 kg. dimensions of the machine ca.: 1.800 x 700 x 1.500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 760 mm turning length: 3000 mm swing diameter over bed slide: 520 mm centre height: 380 mm reus: 17 (7,5 - 1015) U/min tail stock: MK6 quill stroke: 225 mm diameter of quill: 105 mm spindle bore: 132 mm feed: längs 0,039 - 18 mm/min feed: quer 0,02 - 9 mm/min total power requirement: 15 kW weight of the machine ca.: 4700 kg dimensions of the machine ca.: 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 86980 € : 1643.92 € : 860 mm : 3000 mm : 430 mm : 132 mm : 620 mm : 560 mm : 11 : 140 MK : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 240 - 2/3 : 435 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 3470 mm : 1700 mm : 1730 mm : 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating  ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 53250 € : 1006.43 € : 500 mm : 1500 mm : 250 mm : 75 mm : 300 mm : 400 mm : 8 : 80 MK : 3 : 25-100, 100-400, 500-2000 U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60-1/4 Gänge/ : 0.125 - 30 : 240-1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3100 mm : 1250 mm : 1400 mm : 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS:  ...

: neu : Bulgarien : 26210 € : 500.61 € : 325 mm : 750 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 MK : 2 : 85-405, 470-2200 U/Min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 0.1 - 1.75 : 70 - 4 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 2150 mm : 950 mm : 1350 mm : 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 26.730,- The data for this ad was created with ModulMW ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : Wechseltisch Laser sources from 3 - 30 kW Table dimensions:3 x 1,5 / 4 x 2 / 6 x 2 / 6 x 2,5 m The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. The system consists of the following components: Shuttle table system in longitudinal direction for simultaneous loading/unloading and cutting to reduce non-productive production times Encapsulated cutting room with protective glazing CNC graphics control Siemens Sinumerik 840D Laser source Brilase or IPG Cutting head with automatic focus adjustment, Durma or Precitec Cooling unit for cutting head and laser source CAD/CAM software LANTEK for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication  ...

: neu : Bulgarien : 133550 € : 2524.1 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 MK : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 240 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 118510,00  ...

Working range: 1.050 x 650 x 250 mm max. workpiece weight: 400 (800) kg control: Agievision AGIE max. conicity: 30° / 100mm travel -x axis: 500 mm travel -y axis: 350 mm travel -z axis: 426 mm travel U x V-axis: +/-70 / +/-70 mm rapid traverse X-axis: 3 m/min rapid traverse Y-axis: 3 m/min rapid traverse U-axis: 0,6 m/min rapid traverse V-axis: 0,6 m/min rapid traverse Z-axis: 0,6 m/min wire dia.: 0,2...0,33 mm total power requirement: 12,1 kVA weight of the machine ca.: 3,9 t dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m Documents: Wire Eroding Machine AGIE - Agiecut Progress 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 570 mm turning diameter over slide rest: 365 mm turning length: 1500 mm centre distance: 1800 mm spindle turning speed range: 11-2240 U/min spindle bore: 62 mm weight of the machine ca.: 4 t Misc accessories More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: max. 4200 mm Cutting depth: 3-300 mm weight of the machine ca.: 8,6 t Cutting thickness: 3 - 300 mm Track width torch portal / track width: 5.000 mm Usable cutting width / cutting width: Max. 4,200 mm Longitudinal path / longit. travel: 16000 mm Autogenous burner head / torches head: 1 (3 / burner / torches) Autogenous burner / autogen: 2 burners / torches The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mm stroke: / mm table-size: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 16 mm stroke: / mm table-size: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertikale (stehende) Plattenaufteilsäge Striebig Typ Automat TRK 6220 AV mit Schneeberger Positron Positioniersteuerung zum präzisen horizontalen und vertikalen Zuschneiden von Holzwerkstoff-, Kunststoff- und Verbundplatten. Die automatische Ausführung ermöglicht rationelle, wiederholgenaue Plattenzuschnitte im Möbel-, Innenausbau- und Plattenbearbeitungsbereich. Freistehende oder Wandmontage möglich. Technical data: Schnittlänge: 5.300 mm Schnittbreite: 2.200 mm Materialstärke: max. 80 mm Motor: 5,5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

max. wheel diameter: 275 mm max. module: 6 min. module: 1,5 Control: SINUMERIK 840 C tooth width: 5,5 mm spiral angle: min. 0 / max. 60 ° max. number of teeth: 120 min. number of teeth: 5 ratio of transmission: 1:10 min. ratio of transmission: 1:1 work piece spindle speed: max. 110 U/min blade head turning speeds: 20 - 110 U/min total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

press capacity: 28 t x-axis: 2000 mm y-axis: 1000 mm machine weight ab.: 11000 kg Youtube-Video-Links: https://www.youtube.com/watch?v=LdcmUuj8QnM&ab_channel=BaestleinGmbH https://www.youtube.com/watch?v=IcEmqxjpnoE&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 200 mm centre distance: 1.000 mm spindle turning speed range: 1600 U/min spindle bore: 42 mm turning length: 1600 mm turning diameter over bed: 410 mm : 230 mm machine weight ab.: 1.700 kg dimensions: 2000 × 1000 × 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

movement of X-axis: 500 mm movement of Y-axis: 350 mm vert. movement Z-axis: 256 mm workpiece weight max.: 800 kg weight of the machine ca.: 4.5 t : +/- 70 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm burner heads: 0 total power requirement: 3 kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 245 mm turning length: 800 mm total power requirement: 4.5 kW weight of the machine ca.: 1.25 t required space: 1.96x1.69x1.06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1500 mm burner heads: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 150 mm turning length: 800 mm turning speed range: 26 - 2000 U/min spindle bore: 24 mm total power requirement: 0,8 / 1,6 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,60 0,70 1,20 m 1. Hand - School Machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 750 mm turning diameter: 310 mm turning diameter over slide rest: 175 mm spindle bore: 32.0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm spindle taper: DIN 55027 GR 5 total power requirement: 2.2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college () - in checked condition - machine videos - https://www.youtube.com/watch?v=iqU7Bkh6INo https://www.youtube.com/watch?v=aSViqjk51Ik Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - NEWALL digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning di ...

thread dia.: bis M 24 turning speeds: max. 280 U/min thread: M5 - M24 working area: 2050 Rmax. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3.0 kW weight - pallet system: 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Special accessories included in the scope of delivery : - Tap quick-change inserts according to DIN 376 . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can  ...

thread dia.: bis M 36 turning speeds: max. 150 U/min thread: M5 - M36 working area: 2050 Rmax. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 4.0 kW weight - pallet system: 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Special accessories included in the scope of delivery : - Tap quick-change inserts according to DIN 376 . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping  ...

turning diameter: 360 mm turning length: 1000 mm swing diameter over bed slide: 215 mm reus: 30 - 3000 U/min spindle bore: 38 mm feed: längs 0,043 - 0,653 m/min total power requirement: 3,5 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: 1900 x 900 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4216,0 mm y-travel: 2007,0 mm z-travel: 305,0 mm control: CNC table-size: 4902,0 x 2134,0 mm max. workpiece weight: 1465 kg / m² machine weight ab.: 2500 kg total power requirement: 30 kW dimensions of the machine ca.: 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel hig ...

table length: 3048 mm table width: 1524 mm burner heads: 1 Control: CNC workpiece weight: 1450 kg traversing speed: 200 m/min weight: 5010 kg dimensions of the machine ca.: 9450 x 2240 x 2520 mm Laser cutting machine with automatic shuttle table Configuration 1. BodorPower laser source 12 kW 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Stretched aluminum portal 6. One-click fully automatic processing 7. Automatic layout of residual material 8. Edge detection and automatic zeroing of the focal length through intelligent detection 9. Bodor Lightning perforation technology 10. 21.5-inch monitor with touch function 11. Intelligent control of gas pressure 12. Automatic adjustment of cutting gas pressure 13. Bodor Mango® ergonomic remote control 14. Active anti-collision function 15. Intelligent vibration pro ...

turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range  ...

table length: 3048 mm table width: 1524 mm burner heads: 1 Control: CNC workpiece weight: 911 kg traversing speed: 180 m/min weight: 4150 kg dimensions of the machine ca.: 9392 x 2232 x 2307 mm Laser cutting machine with automatic shuttle table Configuration 1. Bodor Power 3kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Mortise-and-tenon type plate welded segmented bed 5. Stretched aluminum gantry 6. Bodor servo motor and driver 7. Bodor rack and pinion 8. One-click processing 9. Bodor Lightning perforation technology 10. Expert database for high-speed cutting 11. Automatic cutting gas pressure adjustment 12. Open door protection 13. Cutting malfunction alarm function 14. Ergonomic remote control (Bodor Mango®) 15. Active anti-collision function 16. Intelligent anti-shake 17. Gas-saving continuous flow nozzle 18. Intelligent main ...

thread dia.: bis M 16 mm turning speeds: 0 - 600 U/min thread: M5 - M16 working area: 2050 Rmax. working area: 500 Rmin. table surface area: 900 mm engine output: 3,0 kW weight: ca. 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

thread dia.: M6 - M36 mm turning speeds: 156 U/min radius: 1200 mm angle adjustable from - to: 0 - 90 Grad weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 37910 € : 724.08 € : 400 mm : 1000 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 MK : 12 : 50-2.240 1/min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 480 - 16 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 4 kW : 2750 mm : 1100 mm : 1600 mm : 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine accord ...

: neu : ca. 6 Monate ab Auftragse : Spanien STANDARD EQUIPMENT • Entry guide • 2 Feeding rolls • 5 Straightening rolls • Cut-to-length shears • Encoder • Touch screen control • Servomotor • Slitting shaft with 2 sets of quickly adjustable circular blades, to a maximum of 6 blades OPTIONS - Film plastic device - Different types of uncoilers - Stacking systems - Recoiler Maximum Width: Material to be processed: Thickness: Number of simultaneous slitting cuts: Production speed: Coil loading capacity: Number of straightening rolls: Straightening ServoMotor: Shears Power: Dimensions: 1250 Steel 420 Nw/mm2 1`25 mm 2 from 0 zu 120 Meter pro Minute 3, 6, 10 to 2 + 5 15 kW 3 kW 2100 x 1700 x 1450 mm 2500 kg 1`00 mm 4 0`50 mm 6 Steel 700 Nw/mm2 0`75 mm 2 0`50 mm 4 Aluminium 200 Nw/mm2 2`50 mm 2 1`50 mm 1`00 mm 6 If you are interested, please send us your enquiry with the ...

: neu : ca. 6 Monate ab Auftragse : Spanien STANDARD EQUIPMENT • Entry guide • Feeding rolls • 7 Straightening rolls • Encoder • Shear • Variable speed of 0 to 20 mts/min OPTIONS • Film plastic device • Motorised entry guide • Hydraulic entry table • Hydraulic dauble entry table • Stackers 2, 3, 4, 6 meters. MATERIAL TO BE PROCESSED: WIDTH TO PROCESS: THICKNESS (R=450NW/MM2) PRODUCTION SPEED: CUTTING ACCURACY: COIL LOADING CAPACITY: Steel 420 Nw/mm2 Steel 700 Nw/mm2 Aluminium 200 Nw/mm2 750, 1000, 1250, 1500 mm from0`5 to 1`5 - 2`0 - 3`0 - 4`0 mm up to 20 m/min +/? 0`5 mm 4,6,10,15 to If you are interested, please send us your enquiry with the following details: - Coil weight - Coil width - Coil inner and outer diameter - type of material - Material thickness - Number of slitting lines (only for slitting and cut-to-length lines) - Material to be processed in tonne ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 269588 € : 3 kW : Wechseltisch : 16 mm : 8 mm : 8 mm : 5 mm : 8 mm : 29,9 (mit Absaugung) kW : 6100 x 2070 mm : 6100 mm : 2070 mm : 125 mm : 6096 x 2032 mm : 240 (für 3 - 12kW) / 400 kg/m² : 5800 (für 3 - 12kW) / 960 kg : 100 m/min : 100 m/min : 141 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm : 42 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems)  ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 174688 € : 3301.6 € : 3 kW : Manueller Tisch : 16 mm : 8 mm : 8 mm : 5 mm : 8 mm : 3060 x 1530 mm : 3060 mm : 1530 mm : 140 mm : 3048 x 1524 mm : 160 kg/m² : 90 m/min : 90 m/min : 127 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The manually extendable table is moved out of the side of the machine for loading and unloading. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cut ...

Offered for sale is an MR Wickeltechnik core cutting machine. Max. uncut core length: 2000mm, min./max. core inner diameter: 76.2mm/152.4mm, max. core outer diameter: 210mm, core wall thickness range: 3mm-18mm, automatic cutting width range: 8mm-600mm, manual cutting width: 2930mm, cutting tolerance: +/-0.2mm, max. core speed: 427rpm, max. feed speed: 200mm/s, cutting capacity: 18cuts/min at 76mm core inner diameter, 7mm wall thickness and 50mm cutting length, control: Siemens Simatic. Machine weight: 700kg. Equipped with fully automatic cutting cycle, manual core feeding, automatic core length detection by means of a photoelectric sensor. Documentation available. An on-site inspection is possible.

: gebraucht : 2015 : 1686 : prompt, Zwischenverkauf v : England : 14800 € : 1 : 330 mm : 1000 mm : 167 mm : 38 mm : 210 mm : 12 : 40 - 2500 1/min : 16 : 0.03 - 1 mm/U : 0.2 - 14 mm : 2 - 56 TPI Gänge/ : 190 mm : 92 mm : 42 mm : 3 MK : 110 mm : 2.2 kW : 1940 mm : 1000 mm : 1550 mm : 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live ...

: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 € : 1 : 22600 € : 400 mm : 1000 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 MK : 12 : 50-2.240 1/min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 4 kW : 2750 mm : 1100 mm : 1600 mm : 1540 kg This machine is used in our workshop for repair work, therefore it has only been used very little so far. (New price € 37,910.00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection saf ...

: neu : Bulgarien : 140320 € : 2652.05 € : 1320 mm : 3000 mm : 625 mm : 155 mm : 940 mm : 700 mm : 15 : 160 MK : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 1/16 - 60 Gänge/ : 0.125 - 120 : 685 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 8550 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 125460,00 turni ...

: gebraucht : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 17600 € : 1 : 325 mm : 1000 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 MK : 12 : 85 - 2.000 1/min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 75 - 2,5 Gänge/ : 0.1 - 1.75 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 2150 mm : 950 mm : 1350 mm : 770 kg demo machine / mint condition net price (price for new machine € 23.970,00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", incl. following optional equ ...

: neu : Bulgarien : 121770 € : 2301.45 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 MK : 24 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 22 kW : 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS turning length1.500 mm € 107020,00 turning length2.000 mm € 110650,00 turning length4.000 mm € 130410,00 turning length5. ...

: neu : Bulgarien : 58370 € : 1103.19 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 3 : 20 - 100, 80 - 400, 400 - U/Min : 120 : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3600 mm : 1500 mm : 1650 mm : 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface ...