bma maschinenbau used for sale

This Priess & Horstmann BMA-DLS-CNC was manufactured in 2000. Ideal for woodworking applications, it offers reliable performance for a variety of tasks. Consider the opportunity to buy this Priess & Horstmann BMA-DLS-CNC woodworking machine. Contact us for more information.

COMPLETELY WORSHOP REFURBISHED ! Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping

Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures  ...

TO WHOMIT MAY CONCERN ; WE VE NEW UNUSED COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 AT OUR STOCK ADDATIONALY WE VE RECON COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 COMPRESSOR SIDE AND TURBINE SIDE ARE NEW .. THIS ROTORS ARE FIT FOR BELOW EXHAUST TURBO CHARGER TYPE TYPE ABB VTR 304 P 11 HT 439312 n max 467 n bmax 443 t max 680 t bmax 650 HZTL 428765 P3 EX STOCK. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

FOR SALE NEW UNUSED ABB VTR 254-11 COMPLETE TURBO CHARGER IN WOODEN BOX. TO WHOM IT MAY CONCERN; WE VE NEW UNUSED ORIGINAL ABB VTR 254-11 COMPLETE TURBO CHARGER WITH ORIGINAL PACKAGE IN WOODEN BOX AT OUR STOCK. PLS FIND SPECT AT BELOW.. TYPE VTR254-11 HT 841632 t Mmax 680 C t Bmax 650 C N Mmax 523 N Bmax 497 SFUS01 YOB 2015 WEIGHT 650KG EX OWNER SUPLIED FROM WARTSILA. MADE IN SWITZERLAND. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

ABB Turbocharger RR151-14 Spare part of a Jenbacher JW612 from 2006, 1 available Manufacturer: ABB Model No.: RR151-14 Type: Turbocharger (one JW612) Serial Number: 834401 n (Mmax) [1/s]: 1052 n (Bmax) [1/s]: 999 t (Mmax) [°C]: 710 t (Bmax) [°C]: 680 Year of Make: 2006 Weight / transport weight [kg]: 115 / 150 Transport dimensions [m]: 1.20 x 0.80 x 0.80

Used automatic foiling machine - cellophore by Wega Elektronik type AM-5/100C. New 2014. Automatic overwrapper designed for big range of wrapped products ( almost 0,5m width). Especially recommended for biggest chocolate boxes  and symilar. Universal automatic machine with a possibility of converting to different sizes of boxes Conventional and non-conventional systems of box feeding with a usage of transporter or box magazine Automatic speed control of transporter and machine Possibility of adaptation to wrap pockets of products Possibility of connection with automatic line Equipped with the touch pad Electronic piloting system PLC Technical data: Dimensions and weight: 2240 x 1160 x 1720 mm / 850 kg Power supply: 3x400V AC/ 50Hz/ 3800W Pneumatic supply: 0.6 MPa, 250 l/min Minimal size of the box: amin = 15 mm, bmin  = 60 mm, cmin = 60 mm Maximal s ...

Single-column eccentric press HELMERDING type TPEP 12 BMasch. No. 831-101 Comm. No. 76228 Year of construction 1976Compressive force 12 ton. Projection 155 mmTable surface 400 x 320 mmTable opening 125 mmPlunger area 125 x 100 mmLifting adjustment 6-60 mmRam adjustment range 40 mmClamping pin hole 25 mm with clamping pieceInstallation height max. 250 mmStroke rate 180 strokes/min. Drive power 1.1kW- Electric foot switch and 2-hand operation- Setup, single stroke 2-hand, single stroke foot and continuous running foot, automatic

workpiece diameter: 5 - 1.000 mm module range: 0,2 - 25 helix angle: < 90 ° Control: Wenzel GearTec faceplate diameter: 750 mm x-axis: 1.200 mm y-axis: 550 mm z-axis: 1.000 mm total power requirement: 6,5 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

batteries: 3x LG RESU FLEX BMA Battery module HV 4.3 kWh + LG RESU FLEX BPU HV Battery control unit (total 12.9 kWh) solar panels: 16 x JAm54D41 (450 wp) Full Black and glass/glass Inverter: GoodWe GW8K-ET Hybrid power: 450 Wp per solar panel total power: 7200 Wp RRP: € 10,875,-- Condition: New Auction-ID: A1-46359-1

batteries: 4x LG RESU FLEX BMA Battery module HV 4.3 kWh + LG RESU FLEX BPU HV Battery control unit (total 17.2 kWh) Solar panels: 20 x JAM54D41 (450 wp) Full Black and glass/glass Inverter: GoodWe GW8K-ET Hybrid power: 450 Wp per solar panel total power: 9000 Wp RRP: € 13,425,-- Condition: New Auction-ID: A1-46359-2

H. Wichelmann mobile coating machine with outfeed vibrating gutter, type: BMA, machine number: 06/838, year of construction: 2006, 10 kW, drum dimensions: Ø 950 mm x 2300 mm, gutter width: 500 mm, s/s screw, diameter: 350 mm, tier: 240 mm, total dimensions: 4500 mm x 2000 mm x 2550 mm, H. Wichelmann filter unit, dimensions: 600 mm x 600 mm x 2000 mm.