bma maschinenbau used for sale

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours.   Tech Specs: Capacity: 695 crates (of 12 bottles) per hour  1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)    

Description Infeed width 650mm The sheet turner enables the turning of flat sheets with a fold pocket in the running direction. This means that the sheets can be printed or labelled on both sides. The import and outfeed transport rollers are segmented, the speed of the inclined roller table and bag infeed can be controlled separately

Crate washer for longitudinal plastic crates with 3 cleaning levels on top of each other and dirt discharge with collection vessel. 1st level: Soaking basin with pump suction channels. 2nd level: Main spraying with upward turner and conveyor. 3rd level: Final spraying with upward turner and conveyor with water collection pool., Additional title: 2500 crates per hour, Capacity: 2500 crates/h, Volume of soaking bath: 2 m3, Power: 24,6 kW, Voltage: 380 V, Frequency: 50 Hz, Length: 6,5 m, Width: 1,4 m, Height: 3,0 m, Weight: 4300 kg, Formats: NRW crates (400x300x290 mm), NRW handy crates (400x300x300 mm), Pinolen crates (395x300x270 mm), Running direction: crates longitudinal, Material: stainless steel cladding, Base construction: standing on 4 feet, Features: 2 x crate turner, soaking basin, main spray jets, second spray jets, dirt expulsion with collection vessel, caustic dosing system

Malt Mill Sommer Hafer-Boy Piccolo 150 kg/h This grain crusher can crush various grains, such as oats, barley, wheat, corn, spelled etc. It has two rolls which one is driven by an electric motor with belt drive. Mill was manufactured in year 2106 by German Egon Sommer and it is in good operational condition. Technical Characteristics Manufacturer: Egon Sommer Maschinenbau GmbH Manufacturer’s model: Hafer-Boy Piccolo 11SB Manufacturing year: 2016 Capacity: 100-150 kg/h Number of rolls: 2 Electric motor: 1.1 kW / 400V / 50Hz Main dimensions: 58x40x33 cm (LxHxW) Weight: 64 kg

Matek Mix-Kult System for mixing ready-made syrup with water or mixing several components. The system is mounted on a base frame. The individual units are easily accessible and can be observed as they work. All necessary fittings, control and display devices as well as the control cabinet are installed. The mixing plant is fully automatic. Syrup and water are dosed in a predetermined ratio, mixed evenly, deaerated and impregnated. The finished beverage is stored in the beverage tank, from which it is then optionally piped to the filler via a pressure booster pump., Additional title: Inline mixing unit, Capacity: 8000 l/h, Operating pressure: 10 bar, Volume: 555 l, Power: 10 kW, Water: 2,5 atm, Compressed air: 5 atm, Length: 1900 mm, Width: 900 mm, Height: 2300 mm, Weight: 1000 kg, Material: Stainless steel, Base construction: Frame, Features: Mixing and dosing vessel; beverage tank; Mohn ...

A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible.

Four-station filling system for large cans and bottles., Additional title: Siphon filler, Capacity: 200 Fl/h, Filling places: 4 pieces, Power: 100 W, Voltage: 230 V, Frequency: 50 Hz, Length: approx. 1,3 m, Width: approx. 0,75 m, Height: approx. 2 m, Formats: 5 l Party cans; 2 l siphon bottle, Features: The containers are pressurized before filling, CIP pipes

Availability: as of now Technical documentation: available Machine dimensions (LxWxH): 1.0 x 1.0 x 1.0 m Weight: approx. 150 kg The full box control was operated without technical problems until 04.2026. The dismantling was then carried out by qualified personnel.

Palletization including pallet loader and unloader, pallet magazine, banding machine, pallet labeling, Capacity: 150 Pallet/h, Features: Pallet loader and unloader: Nagema PA; Year of construction: 1993; Capacity: 1700 crates/h; Dimensions: Length: 3 m, width: 2 m, height: 3 m Weight: 1.6 tons Banding machine: Athena Roboband 2VH; Year of construction: 2004; Capacity: 150 pallets/h; Pallet dimensions: 1.2 m x 0.8 m; Logopac Logomatic 915/T; Year of construction: 2014; Capacity: 150 pallets/h

Offset Pressure Press . Format 44 x 62 cm - Gas device is cleaned and tested

machine measurements: -- mm machine weight: 1.500 kg power capacity: 30 kW Condition: used, Specification: shredder/Shredding plant with two shredders type: WLK 6 S / 30 V-rotor Weima low and slow speed rotor, and second shredder make: AMIS complete plant ready for operation, incl. hopper with lid and platform. Special accessories: - automatic star-delta start-up - gear motor with transport screw - lid with limit switch - quick-change sieve - Hopper can be lifted manually - Equipment for underfloor installation consisting of hopper elevation, guard rail, external emergency stop WLK version with sound insulation, sound-insulated lid and front door Technical data: - Hopper volume: 0.9 m³ - Operating voltage: 3x 400 V - Motor power main drive: 30 kW, 1,500 rpm - Motor power hydraulics: 1.5 / 2.0 kW, 1,500/3,000 rpm - Weight approx.: 1,500 kg ...

machine measurements: 3.000 mm machine weight: -- kg power capacity: 90 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dispersing system Manufacturer: IKA Maschinenbau Type DISPAX-REACTOR DR 3-13/4 Capacity: max. 20,000 litres/hour Technical specifications : Disperser for continuous operation. The maximum delivery pressure is 2.5 bar. Motor 18.5 kW, 3,000 rpm Mechanical seal is connected to the water. In the dispersion chamber there are three stators and rotors in the coarse-medium-fine gradation as standard. This combination can be varied as desired, both in order and in the degree of fineness.

Year of Make: 1998 Operating voltage: 3 AC 400 V Control voltage: 230 V Temperature range: 5 – 40 K (ambient temperature) Current Type: 3 PEN ~ 50 Hz Rated current of the system: 12 A Connected load: 5.2 kW Degree of protection: IP 54Mass (weight): 0.85 t (850 kg)

For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding line, built in 2019. The plant is in very good technical condition, is fully functional and immediately available. A tour under power is possible by appointment. The plant is designed for the cost-effective production of large-volume HDPE hollow bodies and sophisticated technical blow molded parts. It is a discontinuous 3-layer extrusion blow molding line with a storage head. Included in the total scope offered: - Piovan GMS-160 high-performance plastic granulator, built in 2023 - Piovan VM 500 extraction system - GWK/Technotrans refrigeration system The listed peripheral components are included in the offer price. If individual components or all accessories are not required, they can be removed from the scope of delivery and taken into account accordingly in the pricing. Main technical data:  ...

We offer this used Stock Maschinenbau SFAM 2020 Fassonglubemaschine, built in 2004. The associated press belt is built in 2010, the Meler hot melt machine is built in 2022. The working width for hot and cold glue is approx. 2100mm! Type: SFAM 2020 Machine No.: 20041227 If you have any questions or need more information, please feel free to send us a message or give us a call.

Carousel rack for carpet and flooring rolls Robust and fully functional carpet paternoster (carousel shelf) from the manufacturer Hubtex, model TRPA. The system is ideal for space-saving, vertical storage and display of carpets, PVC rolls or other heavy roller goods. Master Data & Weights Manufacturer: Hubtex Maschinenbau GmbH (Fulda) Model / Type: TRPA Engine Number: 39080 Maximum load capacity: 2,750 kg Length approx. 5000 mm Permissible unload (imbalance): max. 500 kg Net weight of the system: 1,200 kg Capacity: approx. 14–16 support rods / roller places Electrical connected loads Mains voltage: 380 V 3 N~ + PE 50 Hz Rated power: 0.75 kW Rated current: 2.1 A Degree of protection: IP 44 The carpet and floor coverings for the circulation shelf can be purchased for € 1000 net extra. Item location: Frankfurt am Main Period: The collection m ...

Press has made about 2,7 million peaces so far, and large factories make over 10 million pieces with these machines. The maximum theoretical diameter of the pieces is 380 mm, production-wise max. 320 - 340 mmfinished size. Depth 110 mmfinished measurement . Speed: small objects 300 - 350 pcs/h large ones 120 - 160 pcs/h. Between 2004 - 2010, less than 2 million pieces were driven on the Press, and after that the demand for the products has degreased and today it is driven only a few hours a week, sometimes the press stands unused for a couple of weeks.

Platform trolley, transport trolley, heavy-duty trolley, industrial trailer, container dolly, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Year of manufacture: 2016 -Platform: 10000/2500/H1030 mm -Load capacity: 16 t -Tires: 250-15 industrial pneumatic tires -Number: 1 heavy-duty transport trolleys available -Price: per piece -Transport dimensions: 10,000/2,500/H1,030 mm -Weight: 3080 kg

1 gebr. Hydraulic Hose Test Bench Manufacturer: Peters Maschinenbau GmbH Type designation: NIVES Type: 35A Technical performance dataMaximum test pressure: Up to 1,600 bar (display on the VDO large pressure gauge) Pressure gauge: VDO test pressure gauge (measuring range 0–1,600 bar) Additional pressure gauge: Festo pressure gauge for control/pneumatics High-pressure components: Components from Autoclave Engineers are installed

Hook mobile mixing plant with Teka high-performance compulsory mixer (THZ) Ring disc mixer R 75. - Dimensions: Length 6.30 m / Width 2.50 m / Height 2.60 m - Weight: approx. 6,000 kg - Mixer: Ring plate mixer from Teka, volume 0.75 m³ according to DIN - Conveyor belt with drum motor: center distance 6.0 m, belt width 0.5 m - Electrical connected load: 25 – 30 kW (380V/63A) Operation is via radio one-handed transmitter. Demonstration possible on request.

Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min -10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical ...

Auction-ID: A1-51285-409

Pisto CP3 almond roaster / nut caramelizer, incl. cooler, built in 2025, for batch production and coating of roasted almonds, caramelized nuts, and similar confectionery products., The system consists of three rotating copper kettles, each heated by a gas burner. The integrated stirring blades ensure nuts, sugar, caramel, sesame or other ingredients are evenly mixed and processed. The copper kettles are tiltable, allowing the finished product to be discharged easily and in a product-friendly manner., The machine is built in a stable stainless steel construction and has been retrofitted with wheels. It is prepared for operation with mobile gas cylinders and is thus particularly suitable for flexible production areas, manufacturers, confectionery producers, nut processors, event/entertainment companies, or test and small-batch production., Additionally belongs a Cooler type CB10 with 10 pl ...