bm 300 used for sale

Noggerath NSI B 300-S/3 Rake. Fully functional Areas of application & function: Faecal collection points: The main application is the reception and screening of faecal sludge to remove coarse solids. Industrial wastewater: Can also be used for sludge screening of industrial wastewater. Automatic operation: An integrated level measurement system controls the drive of the spiral so that it only runs when needed. Compact design: The NSI-B model is designed as an encapsulated stainless steel unit that is integrated directly into a container. Dewatering: The screenings are dewatered and compacted in a press zone, which reduces the volume and makes it easier to dispose of. Cleaning: A special spiral cleans the screen surface during operation.

Specifications: - Three-jaw chuck 300 mm - Chuck manually rotatable 360° - Division grid 24 - Peak height approx. 185 mm - Duchgang / passage 55 mm - Total depth without baking approx. 270 mm - Total depth with jaws approx. 310 mm - Flange plate horizontal W 300 x D 145 mm - Flange plate vertical W 300 x H 335 mm - Weight 100 Kg - Space requirement W 320 x D 310 x H 335 mm

Year of construction 2014

Thank you for your interest in our machines, which we can offer you as follows: Manufacturer : Lödige GmbH Model : FKM 300 D Ploughshare Mixer electr. Values : 400V 50 Hz, 3Ph Drum capacity : 300 l Capacity : 100 – 210 litres Details : - Parts in contact with the product are made of V²A - Front-mounted 2 cleaning flaps with safety switch - Feed nozzle with safety switch - Emptying opening in the bottom with manually operated emptying flap in cylindrical nozzle - Centrifugal unit with ploughshare blades (normal blades) - Bearings & Seals New (incl. gearbox & engine) - All screws New - Sandblasted and then Newly painted We offer this machine for sale "in overhauled condition" with a 6 month warranty on new parts. from the Hess warehouse. Lichtenau; unpackaged

used rack equipped with S7-300

Oven ATA Maxi temperature: 300° C Power: 1,5 kW Voltage: 380 V Internal oven dimensions: Depth 500 x W 295 x H 200 mm External dimensions: L 600 x H 560 x Depth 800 mm Weight: approx 80 kg

We are pleased to present an exclusive offer for two fully re-manufactured SGT-300 gas turbines with a mechanical drive configuration (8 MW) and one gearbox (1500 rpm, 50 Hz), originally manufactured in 2018. These units have been fully overhauled to zero hours, providing up to 48,000 operational hours, and were serviced in a Siemens-approved workshop. Key Features – 8 MW Mechanical Drive: • Power output: 8.4 MW • Efficiency: 35.3 % • Heat rate: 10,204 kJ/kWh (9,666 Btu/kWh) • Exhaust temperature: 490 °C (914 °F) • NOₓ emissions: ≤ 15 ppmvd • Fuel flexibility: Natural gas, liquid fuel, dual fuel Commercial Advantages: • Offer price including gearbox: on request • Ready for immediate deployment • Siemens-approved quality and service, zero-hour units This is a rare opportunity to acquire high-performance turbines ...

sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Feed length - 0.1 - 6500 mm Width 20 - 300 mm Belt thickness 1.0 - 3.0 mm Material Quärschnitt 500 mm2 motor - 2,2 kW Complete documents more info on request

Center height: 300 mm Turning diameter: 600 mm Distance between centers: 2100 mm Eccentricity: max 140 mm Self centering chuck diameter: 200 mm Work piece weight: max 250 kg Grinding diameter: 224 mm Work piece turning speed: 18/40/63/90 rpm Grinding wheel dimeter: 915 mm Grinding wheel thickness: 32-63 mm Grinding motor: 7,5 hp Size: 5000 x 2100 x 1700 mm Weight: 4900 kg Includes 3 wheel hubs and 4 used grinding wheels

- Stainless steel structure - Belt length: 4000 mm - Belt width: 300 mm - With 4 feet - Without electrical control box

Viessmann cooling/freezing chamber External dimensions: 5700 x 3000 x 2450 mm Internal dimensions: 5420 x 2700 x 2150 mm Plate thickness: 150 mm Stock status: 1 piece The chamber is easy to assemble Aggregate and cooler included

NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Key data: 199 , 6 , 40

FS Elliot Centrifugal Compressor with inverter starter = 1 unit Model : P300-300 Brand/ Manufacturer : FS Elliot (FSE) Air Quality : Oil-Free (ISO 8573-1 Class Zero) Compression : Three Stages Compression Cooling Method : Water Cooled Motor Power : 415V, 50Hz, 3 Phase Main Motor : TEFC, 415V, 3PH, 50 Hz Motor Type : Inverter type; brand WEG; IE3 Motor Starter : Inverter type, Free Standing Inverter Drive Starter without a line synchronous bypass system. designed and supplied by manufacturer, cable connection from starter to motor shall be supplied by customer or can be quoted separately. Shaft Power : 264.93 hp or 198.7 kW (} 4%) Delivery Air Flow Rate : 40 m3/min (} 4%), based on cooling water inlet temperature 32°C, inlet air temperature 35°C, Relative Humidity 80%. Discharge Pressure : 6.0 barg. Discharge Temperature : 37.3°C Vibration Sensors : 2 sets, Low and H ...

A fully equipped line for the production of polypropylene yarn type Technorope 1000/100/PP-300: Manufacturer: Sima Srl Useful width of the cutting head: 1000 mm Capacity: up to 300 kg/h, depending on the type of yarn Twister: 16 (with 16 batteries) Yarn types: from 5000 to 120 000 denies

Round table, round dividing table, dividing head, dividing head -Table: Ø 300 mm -Bore center: Ø 62 mm -Height: 115 mm -Groove: 16 mm -Dimensions: 460/420/H115 mm -Weight: 61 kg

Continuous vacuum filler for straight filling and portioning Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Electric power: 9.5 KW Machine dimensions in cm: Width: 175 Length: 140 Height: 205 Delivery time: 20 working days after advanced payment

Electric chain hoist, crane, indoor crane, assembly crane, electric lift, chain bag chain hoist -Chain bag: for crane chain hoist -Dimensions: 720/300/280 mm -Weight: 6.3 kg

Wire feed case for inert gas welding device, shielding gas device, wire feed case -Manufacturer: Ess wire feed case, water-cooled -Type: DVK 300-3 -Accessories: hose package -Dimensions: 750/410/H430 mm -Weight: 32 kg

Technical data of the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-3,0 Included in delivery: 01x CS Sigma Profile, II Choice Material color: sendzimir galvanized Total length: approx. 2,550 mm CS-Sigma profile: approx. 300x75x15 mm Material thickness: approx. 3.00 mm

loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (L/W/H): 6100x1500x2300 mm Weight: 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Hori ...

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA61240-0300 -Stroke: 300 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Dimensions: 510/65/H65 mm -Weight: 3.5 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 250/80 mm -Clamping depth: max. 300 mm -Dimensions: 610/250/H165 mm -Weight: 84 kg

Technical data for the shelf connector: Shelving system: Bito Included in delivery are: 01x Shelf connector, used Material color: sendzimir galvanized Total length: approx. 300 mm Middle-center hole: approx. 260 mm Profile abbreviation: L 50 x 50 mm Material thickness: approx. 2.00 mm Weight/pcs.: approx. 0.437 kg

- engine power: 1.1 kW - dial diameter: 300 mm - cut from below - cutting at an angle of -45 °, 90 °, + 45 °, intermediate angles set manually - vertical pneumatic pressure - protective cover - cooling installation

Control unit, control panel, control panel, control unit, keyboard, screen, control -Manufacturer: Beckhoff, position control type E300 -Connection sockets: only with plug, cable separated -Dimensions: 600/400 / H200 mm -Weight: 18.1 kg

I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS

Travel distances: 415 x 340 x 355 mm [ X x Y x Z ] HSC Machine Number of axles: 3  Control: Heidenhain iTNC 530  Table size X: 470 mm Table size Y: 400 mm workpiece weight: 500 kg Tool changer: 30 - fold Rapid traverse: 30 m/min electronic handwheel

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

- DOCUMENTS AND MANUALS INCLUDED WE ORGANIZE SHIPPING AS WELL Max. concentricity errors at 300 mm: 0.008 mm RS232 / USB : interface Measuring range diameter (x) 310 mm Application range height (z) 320 mm Weight 90 Kg Max. tolerated errors (mechanical) 0.003 mm Max. tolerated errors (vision system) 0.005 mm Max. radius measurements < 5% - Max. angle measurements errors < 0.2° Max. concentricity errors adapter 0.002 mm Max. resolution 0.001 mm Max. manual moving speed 1 m/s INSERT CONUS MK5 IT WAS USED BY LATHE CNC DOOSAN PUMA

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller -MOD: 1/11919-002 -Art.: 234500-14530 - Quantity: 1 piece -Dimensions: 390/105/H325 mm -Weight: 8.2kg

Kirsch / Iveco Emergency Power System Diesel Generator Power Generation Generator Container Operating hours generator: 411 hours Kirsch Power Generation Unit Type: D 300-4 IWE Year of construction: 2007 Rated power: PRP 240 kW Rated voltage: 400 V Rated current: 433 A Nominal frequency: 50 Hz Rated speed: 1500 rpm/min Weight: 2530 kg Iveco Engine Motor Model: F3BE0685CBXXX Displacement: 12.9 liters Specified kW (BHP): 330 (442,50) at 1800 rpm Fuel consumption at specified power: 245mm^3/stroke

Wire electrode, welding wire, welding wire -Material: stainless steel -Shielded gas wire electrode: started roll -Type: 318 Ø 1.00 mm -Dimensions: Ø 300 / 105 mm -Weight roll: 13.8 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 13 mm -Inside diameter: 100 mm -Price: per piece -Number: 4 pieces -Weight: 1.9 kg

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 10 mm -Inside diameter: 100 mm -Price: per piece -Number: 2 pieces -Weight: 1.4 kg

offer 21055 Double polishing block Specifications: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 70 mm - Disc speed 1450 rpm - Working height 1100 mm -Mot. Dust extraction - Drive 400 V / 1.1 kW - Space requirement approx. W 800 x H 1250 x D 600 mm - Weight approx. 150 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 300 mm -Width: 40 mm -Interior diameter: 51 mm -Weight: 6.2 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Abrasives: 48 types, 189 pieces in total -Outer diameter: 40 to 300 mm -Type: 1 photo with type designation/dimensions can be sent per article -Price: complete -Dimensions: 1200/800/H200 mm -Weight total: 202 kg

Technical data for the shelf connector: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 300 mm Cross-section: U 50x25 mm Material color: sendz. galvanized Weight: 0,33 kg | Pcs.

The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 300 mm Profile abm.: U 50 x 40 mm Material color: blue Weight: 0,55 kg | Pcs.

Roller conveyor, conveyor belt, roller track -Roller conveyor: 5 floors -Roller width: 300 mm -Rollers: Ø 50 mm -Roller spacing: 150 mm -Floor spacing: 700 mm -Overall dimensions: 650/400/H3010 mm -Weight: 72 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: Stroke 300 mm -Piston rod: Ø 28 mm / Thread Ø18 x 40 mm -Hole: Ø20 x 16 mm -Cylinder: outer Ø 62 mm -Dimensions: 585/120/H90 mm -Weight: 11.2 kg

Technical data for the shelf connector: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Set Spacer NR screwed L300, new consisting of: 01x Spacer NR L=300, sendz 02x hexagon screw 8.8 M10x25 galvanized 02x tooth nut 6-edge 8.8 M10 flange verz. 02x flat disc M10 galvanized