blum pro center used for sale

Anton Paar ProveTec GmbH Penetrometer Type: PNR 12 Year of construction: 2022 Find more here - / Contact us at -

SFC. Isolator SFC 10 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -

Noise protection cabin with indoor crane, used as a welding cabin (therefore optionally with extraction). HüWa noise protection cabin with crane runway including 2 Demag cranes & electric rolling doors. Cabin dimensions: L = 26,000mm, W = 8,000mm, H = 5,300mm Data cranes: Track length: 25,000mm, load capacities: 1,000kg / 500kg, beam lengths: 7,000mm / 7,000mm. KBK crane track with suspensions Crane 1 with electric chain hoist including energy supply and circuit breaker, including electric trolley and crane travel KBK double girder crane load capacity 1,000kg, Electric crane driving with RF125 crane 2 with electric chain hoist including energy supply and circuit breaker, in aluminum version KBK double girder crane load capacity 500kg. Cabin is dismantled and stored in A-4942 belts. Find more here - / Contact us at -

- SFE. Superfast 2x18L CO2 Extraction System manufactured by Thar Process. The supercritical fluid extraction system is designed to extract oil, oleoresins, and other ingredients which become soluble in supercritical CO2 at high pressure and temperature. SFC. Isolator SFC 20 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -

YARN PRODUCTION MACHINERY: 2X 2014 RIETER A11 UNIFLOC MACHINE 2X 2014 RIETER A48 HEAVY METAL SEPARATOR 2X 2014 RIETER B12 UNICLEAN 2X 2014 RIETER B76 UNIMIX 2X 2014 RIETER A79 UNISTOR 2X 2014 RIETER A21 CONDENSER 2X 2014 JOSSI MAGIC EYE 2X 2014 JOSSI TVS XSPECT 1X 2014 RIETER B25 WASTE OPENER 1X 2014 RIETER UNICONTROL 2X 2015 ARGEMA SMT 64500 14X 2014 RIETER C70 CARD MACHINE 4X 2016 RIETER C70 CARD MACHINE 6X 2014 RIETER SB-D 45 6X 2014 RIETER RSB-D 45 1X 2014 RIETER SPIDERWEB 10 X 2014 RIETER R60 Open End Spinning • Make : Rieter • Model : R60 • Year : 2014 • No of Rotors : 600 • Yarn Clearer Make : Rieter Q10 • Piecer Carriage : 4 • Opening Roller Type : B174 N-64 • Rotor Diameter in mm : 33 • Length Measuring : Available • Type of Spinbox : R60 • Type of Drum : SRZ • Conicity : Cylindrical • Rotor Drive Type : Aero - bearing � ...

Manufacturer: EKRA Model: X4 PROF Weight: 920 kg Year of Manufacture: 2008 Nominal Voltage: 230 V AC Frequency: 50/60 Hz Working Voltage: 24 V DC Number of Phases: 1 Power: 1.2 kW Circuit Breakers: 16 A Pressure: 6 bar Maintenance status: Machine is not currently serviced, but is fully functional Operating hours: unfortunately no counter in the system; machine has been running on average in 1-shift operation since the beginning of 2008 Accessories: 2x squeegee 220mm, 65°; 2x squeegee 350mm, 65°; 2x squeegee 350mm, 45°; 2x squeegee 450mm, 65°; 2 support plates 275mm Documentation: complete system manual in paper form Operating system: WIN XP Software version: SCBDRV V6.11-2 Find more here - / Contact us at -

Progress MSR 20/6 Straightening and Bending Machine - Year of Manufacture: 2015 - Wire Diameter: 8 mm - 20 mm - Straightening Length: 500 mm - 14,000 mm - Rotor Straightening System: Equipped with a feed unit - Automatic Wire Diameter Changeover - Max Feeding Speed: 160 m/min - Stationary Shear - Includes: 6 reels, each with 5-ton coil capacity The 2015 PROGRESS MSR 20/6 is a specialized bending machine used primarily in the construction and manufacturing industries for processing reinforcing steel bars and wire. Manufactured by Progress Maschinen & Automation AG, this model is designed for high efficiency and precision in bending and cutting operations, particularly useful for creating structural reinforcements. Key Specifications and Features - Bending Capabilities: The MSR 20/6 is typically equipped to handle multiple wires simultaneously, up to six wires with a diameter around 6  ...

Aircooled chiller/Heat pump SYSTEMAIR AQR290-H050.PROTO 46/54kW Cooling capacity: 46 kW / 13 tons (12/7 — 35°C) Heating capacity: 54kW / 15,3 tons (40/45 —7°C) Year of manufacture: 2023 Options; Heat pump Heat exchanger: Plate Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Copeland (scroll) Type of refrigerant: R290 Number of fans: 1 pcs. Dimensions: 2.25x1.1x1.75 m Weight: 507 kg Working hours: 0/0 h. Condition: outlet: new

Specifications: Maximum cutting width: 2050 mm Maximum cutting capacity steel: 0.5 - 4.0 mm Adjustable rip fence: 1050 mm Retraction function Cutting gap adjustment Working height: 1030 mm Dimensions (length x width x height): approx. 2500 x 1900 x 1750 mm Weight: approx. 3,6 tons

Specifications: Working length: 4100 mm Stand width: 3650 mm Press force: 220 to CNC control: OPERATOR OPII graphic Color Screen Size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 420 mm Stroke: 180 mm Auto. Crowning Laser monitoring Motor power: 17 kW CE mark Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 16 tons Accessories: various tools

Specifications: Working length: 4100 mm Stand width: 3650 mm Press force: 170 to CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Specifications: Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Stroke: 200 mm Projection : 420 mm Crowning Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1-set AMADA standard tool The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

4 printing inserts(cassettes) for Muller Martini Grapha Progress 520 format : 25.5". No damages, in very clean and good condition, ready for production. Pitch 1/4 " Blanket cylinder is clamped. Loaded on wooden pallets. Can ship worldwide.

Muller Martini perforation cylinder 25,5 ", pitch 1/4, in very good condition. For MM progress 520.

(processless) (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Ser. No.: PJ000016 // Typ: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the plate type used) Format (cm): 52 & 74 with software license for both formats Plate formats (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26298.03 m2 Plate counter: 81600 pieces Exposure counter: 81322 pieces Total material used: 27988.8 m2 Total of all plates: 86417 pieces Total of all exposures: 86220 pieces Total of all punches: 86524 pieces Total of switch-on time: 85165.82 hours Total of exposure time: 3053.96 hours Equipment / Additional information: Plate stacker, advand PST 26 integrated single cassette loader, fully automatic plate loading/unloading unit with automatic intermediate paper removal, exte ...

For sale is a used Nordson Problue 10 hot melt machine

For sale is a used Nordson Problue 4 hot melt machine. Various application heads as well as hot glue hoses (new and used are available)

arm length: 2-3 m total column height: 4,3 m weight max. in kg: 80 kg travel of hook: 4,3 m NEWNever usedOVP Pillar jib crane - lifting capacity 80 kg with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 HV.3 V16/4 Year of manufacture 06/2024 - Hook path max. 4.3 m Chain size 4.2 x 12.2 RDC/TDK Mains connection 380 - 415 v Uc: 24 v The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet format: max. 760 x 1060 mm, min. 300 x 350 mm Equipment: Stripping station, centerline, non-stop, micrometer adjustment, electronic double sheet control, sheet marking device, vacuum feed belts, drawing mark left, slide mark right, machine hours approx. 8 million punches, 1 die-cutting frame Quick-release frame at the top/bottom of the stripping station, raised position, max. machine speed 8,000 sheets/hour, max. die-cutting pressure 260 tons, materials that can be processed: paper min. 90g/m², cardboard / solid board max. 2,000 g/m², corrugated board up to 4 mm.

Dough dividing and rounding machine Fortuna Primus Pro head machine - Dough dividing and casting machine - Fortuna Primus Pro - 4 rows -Stainless steel - Voltage: 3x400+N Volt - Power: 1.9 kW - Frequency: 50Hz - Required fuse: 25 A - Year of construction 2013

grinding length: 600 mm grinding width: 250 mm workpiece height: ca. 385 mm table surface area: 600 x 200 mm table speed -stepless-: 2 - 35 m/min table load capacity: max. 250 kg grinding wheel size: ø 225 x 25 mm grinding wheel hole diameter: 50,8 mm vertical feed autom.: 0,001 - 0,099 mm rapid traverse vertical: 600 mm/min cross feed of table continual: 10 - 1000 mm/min rapid traverse cross: 1000 mm/min total power requirement: 6 kVA dimensions of machine L x W x H: 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deck Oven Quail Piccolo PRO II-6 - Stone slab oven built in 2013 - Manufacturer: Wachtel -Type: Piccolo PRO II-6 - 6 floors - 120cm wide and 80cm deep on each floor - With fixed water connection - each floor is equipped with separate swash box - Each floor with separate control - Top and bottom heat can be controlled separately - Oven can be moved on castors - Master control - electr. Connected load 50.4 kW - Year of construction 2013

Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Type: Vertical Drive: Hydraulic

Manufacturer: Krones (modernised by Hormes) Type: Prontomatic Glass bottle labeling machine. Prepared for the processing of front and back labels (2 labeling stations), with 2 glue pumps (cold glue), maximum label length: 130 mm. Achievement. Up to 20,000 bph Good condition. Incl. format parts for different bottles 0.33 - 0.5 l

The scope of delivery includes: 01x U-profile, used Material colour: orange Overall length: 2,480 mm U-profile: 100 x 50 mm Slotted hole: 40 x 15 mm Material thickness: approx. 6.00 mm Weight | Pcs.: approx. 26.31 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

- Baking Plate Amount: 76 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,100 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!

Travel paths X/Y/Z: 900 x 400 x 200 mm Table size 800 x 400 mm

- Baking Plate Amount: 100 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: max. 5.700 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!

- Baking Plate Amount: 73 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,000 pieces / Hour - Cone Size: max. 230 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Transport Unit with Wafer Turner - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025

Weinig Profiamt 22N four-sided planer Working width 230mmm Working height 120mm Number of spindles 5 1.Bottom 4kw 2.Rights 3.Left 5.5kw 4.Top 5.5kw 5.Universal 4kw Pneumatic material clamps Feed speed adjustable via variator 6-22m/min Feed motor 2.2kw Automatic worktop lubrication Worktop air cushion Length of the material insertion table 1970mm

Profilcut Tool Set Leitz Front Door as good as new Item No.: SE 220 1 50 4800-10600 Y30 ET 952141/711001 MAN

Manufacturer: Quickwood , Type: Pro 1400 Elite, Year: 2008, Control: Pogramm , Number of units: 8, Working widht mm: 1400, Through running hight max mm: 100, Diameter of brushes: max. 350, Through running hight max mm: 100, kW output motor: 4x1,84, Feeding speed continous adjustable: yes, Weight approx. kg: 2100, Work piece width min-max mm: 1400, Min.-max. workpiece height in mm: 100, Year :2008

Manufacturer: Promicon, Type: PMC.09-E9, Serial number: 910014, Year: 1989, Output DC Volt: 220V 50Hz, Year :1989

Manufacturer: Bernecker + Rainer, Type: PROVIT500D2, Serial number: 820.329/00.00, Output DC Volt: 220 V, Output Pav= Watt: 30 W, Imax= Ampere: 0,14 A,

Manufacturer: Format 4, Type: Profit H20, Year: 2014, Feeding speed max m/min: X-80, Y-80, Z-20, Working range X: 3830, Working range Y-axis: 1680, Working range Z: 275, Vacuum pumps m³/h: 90, incl. tools: yes, Gesamtanschluss kw: 18, Weight approx. kg: 3350, Year :2014

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 1 X 900,

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 18 X 900,

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Doppelseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 2 X 900,

Manufacturer: Protool, Type: Bohrm. DRP 8 E, Drilling engine kW: 0,460, FREE TEXT: mit Ständer,

Manufacturer: Prodeco, Type: M1, Year: 2012, Number of rotors: 1, kW power rotor: 15, rotor diameter mm: 240, Dimensions of funnel in mm: 1000 x 800, Length/width/height: 1615 x 1000 x 1500, Wight approx. kg: 1080, Year :2012

Manufacturer: Bütfering, Type: Profiline SCR/RRR, Year: 2007, Sanding width mm: 1350, Sanding hight mm: 3-160, Number of sanding belts: 3, Sanding belt dimensions: 13702620, Rollers: 3, Rubber roller: 1, Steel roller: 2, Shore roller 1: 70 , Bürstenaggregate: 1, Band 1 Leistung kW : 37, Band 2 Leistung kW : 30 , Band 3 Leistung kW : 22, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 7, Constant table hight: yes, Vacuum table: yes, Weight in kg: ca. 2020, Year :2007

Manufacturer: Falconi Leistenspritzmaschine, Type: Profiplus, Year: 2007, Control: Programm, Work piece width min-max mm: 10-240, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-80, Working width mm: 300, work piece detection: yes, Conveyour system: Band/Rolle, Spraying stations: 5, Laquer circles: 1, Laquer system - airless: yes, Laquer recharging: no, Dry exhauster: yes, Feeding belt mm: 400, Feeding speed m/min: 10-60, Number of units: 5, Feeding speed continous adjustable: yes, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Dimter , Type: Profipress 3500, Year: 2003, Continuous flow system: yes, Work piece width min-max mm: 300 - 3500, Min.-max. workpiece length in mm: 1300, Min.-max. workpiece height in mm: 11 - 60, Hydraulical/pneumatical: yes, High-frequency: yes, Warm water: yes, Thermoöl: yes, High / low pressure: yes, Cylinder vertical: yes, Cylinder horizontally: yes, Pre-assembling conveyor: yes, Glue application machine: yes, Clamping: yes, Disc saw transverse: yes, FREE TEXT: 2800 Betriebsstunden, Year :2003

Manufacturer: Ligmatech, Type: Profi TD/31/25/12, Year: ca.2004, Control: Siemens, Turning device: wendevorrichtung, Working length max mm: 2800, Working widht max mm: 1300, Feeding speed max m/min: 10-30, Feeding speed continous adjustable: yes, Headroom adjustable: yes, roller diameter mm: 80, Working hight mm: +-900, Engine power kW: 6, Dimensions L x W x H mm: 6200 x 2800, FREE TEXT: Fahrbar Rolle, Year :ca.2004

Manufacturer: Friz , Type: Profi PWP 120/42, Year: 2006, Control: yes, Suitable for veneer and paper: 2D Folie, Film width mm: 450, Gluing system Pu: PUR, Feeding speed min-max m/min: 6 - 40, Feeding speed continous adjustable: yes, roller diameter mm: 152, Work piece width min-max mm: 10 - 450, Min.-max. workpiece length in mm: min 2500, Min.-max. workpiece height in mm: 6 - 150, Overhauled on: 35 Betriebsstunden, Year :2006

Manufacturer: Toshiba, Type: Programmable Controller, Modell: EX20-1MCRB5, Seriennummer: 5602167,

Manufacturer: Italpress, Type: Program 30, Working widht max mm: 3000, Working width min min mm: 1800, Hydraulical/pneumatical: hydraulisch 3 PS, Wight approx. kg: 1800,

Manufacturer: Heesemann, Type: Profilklotzeinschleifgerät PWST, Bauyeshr : 1994, Control: hand, Sanding belt hight: 80, Tischlänge mm : 800, Work piece hight min - max mm: 80, Control panel on top: yes, radius sanding device: yes, Profilwerkzeug-Formschleifmaschine PWS-T <CRLF>für das massgenaue Schleifen der Konturen vorgearbeiteter<CRLF>Profilwerkzeuge, bestehend aus<CRLF>über Getriebemotor oszillierend,<CRLF>Profilwerkzeuge auf Kreissegment schwenkbar gelagert.<CRLF>, Year :1994

Separator - S+S Metal Separator Protector 40 (2 pcs.) Description: Separator for non-ferrous, ferrous and non-ferrous metals, with detector All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request