blowing used for sale

Used filling and packaging line for delicatessen products, In use for mayonnaise, 500 g - jars,, Output: up to a maximum of 170 glasses/minute, consisting of:, OSMEKA - empty glass - depalletizing, pit design, year 2004, Output: 2 layers / minute,, buffer table with separation,, Turning and blowing machine, make Engler, year 2001, Output: max. 170 glasses/min,, Piston filling machine, make Engler, year 1998, Output: up to max. 200 glasses/min,, SAFELINE (METTLER TOLEDO99 metal detector, Drying tunnel, make ACI, Dri-Line Series, CLEVER sleever + shrink tunnel, LANGGUTH labeling machine, type E212/R-235, year 2000, Output: up to max. 170 glasses/min,, MR labeling technology, seal labelling, year 1998, Output: up to max. 200 glasses/min,, MEYPACK tray packer, year 1996, with foil wrapping machine + shrink tunnel, Output: 14,400 glasses / h - 20 cycles per minute

x-travel: 1600 mm y-travel: 1250 mm z-travel: 1000 mm Control: HEIDENHAIN TNCi 530 tool taper: HSK-A63 spindle turning speed range: 18000 U/min table dimension - cross: 1250 mm table dimension - longitudinal: 1500 mm rapid traverse: 60 m/min feed: 20-15000 mm/min workpiece weight: 4000 kg table turning speeds: 10 U/min Tools changer: 60 pos. handwheel: el. Machine on: 49248 Spindle hours: 13157 total power requirement: kW weight of the machine ca.: 34 t dimensions of the machine ca.: 8800 x 8800 x 3500 m he DMU 160P is in very good condition and can be inspected under power at the sellers premises. under power at the sellers premises. The machine has mainly been used to mill plastic and otherwise aluminium. Description: Spindle HSK63 18.000 1/min approx. 1.000h Minimum lubrication inside/outside Blowing air inside/outside coolant from the outside Tool magazine 60-fold Measuring probe Hei ...

4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

Machine / Blowing Broom REGO 40L 15 Wires Stainless Steel New? Product? Type: REGO, 40 L? Condition: New? Material: stainless steel? 15 thick wires? for slinging machines from the manufacturer Rego? Total length: 450 mmSee pictures for details

Year of construction: 2008 CNC controller: MSX850-III Capacity X-axis travel mm: 280 Y-axis travel mm: ±60 Z-axis travel mm: 820 Turning length mm: 713 Max. turning diameter mm: ø 420 Swing over bed mm: ø 995 Swing over cross-slide mm: 825 Bar work capacity mm: 90 Upper turret Number of tool slots St .: 10 Speed ​​driven tools RPM: 6000 Indexing time s: 0.3 Main spindle Speed ​​spindle rpm: 3000 Spindle bore mm: 105 Chuck type: 12" Spindle nose: JIS A2-8 Tailstock Tailstock travel mm: 734 Holder: MT-5 Coolant system Tank capacity liter: 300 Equipment Electronic Handwheel Chip conveyor Swivel head Infrared probe Rotating inspection windows Operating mode 4 blowing air through spindle center selectable via M-function 3D quickSET Working time hours Under power: 62041 Spindle 1: 28159 Rated power kVA: 48  ...

Description: Machine information : Machine on: 18573 h Running time: 6735 h Cutting time: 6460 h CAPACITIES X axis travel: 1300 mm Y axis travel: 650 mm Z axis travel: 600 mm Table surface: 1450 x 650 mm Table load capacity: 1300 kg Distance spindle nose to table: 125-725 mm Distance table/floor: 900 mm SPINDLE Drive system: GEARBOX Spindle speed: 6000 rpm Spindle nose: BT 50 Motor power (continuous/30 min): 15/ 18.5 kW Motor torque: 381 Nm MOVEMENTS Rapid feeds for X / Y / Z axes: 30/30/24 m/min Working feed (cutting): 10 m/min Ball screw dimensions: diam. 45 x pitch 10 PRECISION (VI 3441) Positioning (P): 0.012 mm Repeatability (Ps): 0.006 mm TOOL MAGAZINE Tool changer: RANDOM Magazine capacity (standard): 40 tools Max. tool diameter (adjacent pocket empty): 80 (150) mm Maximum tool length: 300 mm Maximum tool weight: 15 kg OTHER Compressed air requir ...

Description: well maintained and powerful wide-belt sander with technical specs as follows: sanding width 1350 mm workpiece thickness 3 - 160 mm feed speed 3 - 15 m/min (frequency controlled) vacuum feed-belt cross sanding unit 15 kW, belt speed 2,0 - 20 m/s (frequency controlled), dimensions of sanding belt 4800 x 150 mm length sanding unit 15 kW, belt speed 1,8 - 18 m/s (frequency controlled), ,dimensions of sanding belt 2620 x 1400 mm length sanding unit , with pressure lamella belt 15 kW, belt speed 1,8 - 18 m/s without pressure lamella belt and 1,8 - 9 m/s with pressure lamella belt, ,dimensions of sanding belt 2620 x 1400 mm pressure beam with computer controlled selctive pressure control system (CSD) with stepless pressure adjustment of the single pressing elements. Distance of the rolls 16 mm structure brush 11 kW, diameter 250 mm, oscillating cleaning brus ...

Overview  The blowing machine was manufactured by Sidel in 2004 and has only been used by a mineral water company. The machine has been regularly maintained and is in good condition. The seller bought a bigger machine, therefor this machine is available for sale. Technical Details  Capacity: 9,600 bph with 1.5 l and 12,000 bph with 0,5 l Number of cavities: 8 Formats / moulds included: 1,5l Bottle neck: PCO 1881 and 29/25 Additional equipment  Preform kipper Preform hopper Preform feeder

Used Filling Monoblock GAI 1300 42 S01 year 2018 Creation of the vacuum and of any gas blowing before capping with a special pressure reducer and connection system with any external gas cylinder Two sets for two type bottle sizes 75 cl and 33 50 cl [...for more information send your inquiry to the seller.] refno: M108

Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).

FAGIMA Jazz L5 AX 5-axis continuous machining centre TECHNICAL CHARACTERISTICS: Year: 2018 CN Type: HEIDENHAIN iTNC 640 Number of continuous axes: 5 X-axis travel: 2000 [mm] Y-axis travel: 600 [mm] Z-axis stroke: 550 [mm] X, Y and Z axis travel speed: 20000 [mm/min] Fast travel speed X, Y and Z: 40000 [mm/min] Acceleration axis displacement: 2.5 [mm/sec²] Minimum distance. Spindle/Table: 30 [mm] Table length: 1250 [mm] Table width: 800 [mm] Max. weight Permissible on the table: 500 [Kg] Tilting table area: 600 x 600 [mm] Angular stroke C-axis: table revolution: 360 [°] Max. speed C-axis: 25 [rpm] Angular stroke axis B: -110 / +110 [°] Pin Attachment: ISO 40 Max. speed Spindle: 15000 [RPM] Spindle power: 17 [kW] Number of tool magazine stations: 80 Max. length Tool size: 300 [mm] Max. weight per tool: 7 [Kg] Max. total weight Eligible tool magazine: 400 [Kg ...

Description: - Cutting height: 125 mm - Cutting length: 4300 mm - Horizontal type - Table length: 2160 mm - Table width: 650 mm -  blade 125 mm - Automatic feeding of panels by rear push system, with clamps/spreaders - Maximum clamp opening mm 130 - Power-Loc' quick-release system for replacing saw blades (scoring and main) - Adjustable blade carriage speed (estimated from 5 to 130 m/min) - Lateral workpiece alignment system, left and right, maximum stroke mm 1300 - 4 front tables, with air blowing system Machine sold without tools or accessories Approx. Onsite Dimension. (l x w x h): 7,064 x 11,290 x 2,100 mm, weight approx.: 7000 kgs kg

Overview This extrusion blow moulder from Spanisch manufacturer Urola was built in 2019. This machine is available because the owner increases capacities. It is still in running condition and be viewed in person anytime. Technical Details  Capacity: 1000 bph at 3L Containers up to 2 litres in HDPE, PP, and other different materials used in multilayer applications (EVOH, Polyamide, adhesives, etc.) Number of cavities: 6 Max. closing force: 5,000 kg Max. blowing pressure: 6,5 bar Number of extruder zones: 5+1 joining zone Installed extruder: 155kW (108kW extruder motor) Max. plasticising: 300 kg/ h Floor dimensions machine: 6,870x5,820 mm Dimensions electrical cabinet: 1,600x500x2000 mm Weight: 16,000 kg Connections: Power supply: 400V, 50Hz, 173kW Low pressure pneumatic supply Cooling water supply

Description: STRAMA camshaft cleaning system The cleaning system is suitable for cleaning camshafts or parts with smaller physical dimensions. , Camshaft cleaning was last carried out on the system. The machine is currently out of service. A brief description of how the machine works: A handling robot with a 3-finger centric gripper takes the camshafts automatically. The robot feeds the camshaft to the cleaning, drying and vacuum drying stations one after the other. The cleaned and dried shaft is then automatically deposited by the robot in a removal station. , The cleaning system consists of the following components: Transfer with robot from workpiece carriers Cleaning stations: Cleaning, blowing off / drying and vacuum drying Removal station (depositing by robot) Handling robot with gripper (robot type: KUKA, KR30-3 Foundry) Soundproof enclosure Tank, filter and pum ...

Single sided edge banding machine Brand: IMA Type: COMPACT PC-6220 F Year: 2000 Left hand machine Workpiece transport via a driven transport chain and adjustable top pressure Beckhoff control Need of space LxWxH mm: 7400x1500x2000mm Weight: approx. 3600kg Technical data: Edge material: a) Veneer/coil and strip ware, b) PVC/coil and strip ware c) Solid wood strips min. edge height = approx. 14 mm max. edge height = approx. 55 mm min. edge tickness = approx. 0,4 mm max. edge thickness = approx. 20 mm min. panel thickness = approx. 10 mm min. panel thickness = approx. 16 mm at use of the multi function unit max. panel thickness = approx. 50 mm min. panel width = appprox . 60 mm min. panel length = approx. 150 mm max. strips = approx. 20x50 mm Panel supernatant from the chain conveyor = approx. 35 mm Pneumatic connection: approx. 7 - 8 bar The basic  ...