127,606 used machines on RESALE, but how to find them? Machine Search
Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022
Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition
Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request
A refurbished positive displacement blower is offered Brand: Aerzener Maschinenfabrik Type: GMB 16f13 All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.
3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881
A refurbished positive displacement blower is offered Brand: Aerzener Maschinenfabrik Type: GMB 16f13 All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.
HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)
HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder
Rietschle side channel blowers 1.5 kW 170 / 200 (max.) m³/h
The positive displacement blower is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.
Keller Lufttechnik MKR 063-55 Fan Air range: 37,000 Nm³/h Total pressure difference 3400 Nm³/h spec. Gas weight at 20 degrees: 1.2 kg/m³ Motor power: 55 kW Fan speed 1475 rpm Year of construction 1987 Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!
used
Two-station machine for stacking canisters up to 10 ltr. Year of construction 2000. With PWDS and SFDR. Clamping force 200 kN. With aftercooling stations and needle bubbles. Also included is the conveyor belt for canisters. Good condition
Offered is a used D 36 S Delta Hybrid unit in good condition. If you have any questions, please do not hesitate to contact us.
Brand: Siepla, Model: Minerva 2.2, power: 56 Kw, year: 2011. It is automatic, easy to use and simple. With horizontal design facilitating access to its different parts and maintenance. It works in continuous cycle from the loading of the preforms to the automatic unloading of the bottles. Infrared sensor that measures the temperature of each preform before entering the mold. Air recovery system being two different pressures of compressed air. It converts some of the 35bar air into 10bar air that can be used by the machine itself.
SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately
The GM 60 S unit can be adjusted to your performance data. The blower stage is completely overhauled. If you have any questions, please do not hesitate to contact us.
The GM 90 S unit can be adjusted to your performance data. The blower stage is completely overhauled. If you have any questions, please do not hesitate to contact us.
Single-station machine for items up to 10 ltr. Extruder 6+0/20D. Single head, capped separator. Waste die-cutter. At call
Manufacturer | manufacturer: Hesta Machine Type | machine type: HM 501 Stations | stations: Single Station | Single station Year of construction | Built: 1993 Location | location: UES Clamping force | Clamping force: 40 kN Control Type | control system: Original Hesta Extruder | Extruder: 50/22D Extrusion Head | Extrusion Head: 2-fold head 100mm | Double head 100mm Mold dimensions mm | mold dimensions mm (A length / length x B Breite / width x C Tief/depth): Bottle Volume Max. | bottle volume max.: 2 L Screen Language | monitor language: German / English | German / English Delivery Time | Delivery time: 1 - 3 weeks | 1 - 3 weeks
used
Offered is a refurbished rotary lobe blower Brand: RKR / Robuschi Type: SRB 60. All our refurbished blowers are fitted with new bearings and sealing elements. If you have any questions, please feel free to call.
The blower stage is completely overhauled and can also be offered as a complete unit.
Key data: 2000 mm, 10 mm
Sheet metal straightener, partially overhauled sheet leveller, partly overhauled Typ/ type: UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm min. sheet thickness / min. sheethickness: 3 mm Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...
Piller Blower 63790 KKX 90710 Air blower of 2018, like new, complete with control system, 1 available. 26.5 m3/s, 15 bar, 445 kW Blower Piller 63790 KKX 90710 Manufacturer: Piller Model No.: 63790 KKX 90710 Serial Number: 903736 Type: Air Blower Power [kW]: 445 Flow rate [m3/s]: 26.5 Pressure max [bar]: 15 Year of construction: 2018 Weight [kg]: 8.587
used
On offer is a used D 36 S Delta Hybrid engine in good condition. If you have any questions, please do not hesitate to contact us.
used double head, with WDS adjustment, in good condition. 125 mm center to center, die dia up to 55 mm.
Year of construction: 1991 with double head 70 mm stitch Clamping force: 18 kN Machine is in good condition, and has few operating hours
Single-station machine for containers up to 1.5 ltr. Extruder 60/20D with DC motor and Hitachi frequency converter. Double head 100 mm stitch with WDS. Cold separation. Waste punch, old pneumatic valves replaced by Festo valves. No oil or air leaks. Good condition, immediately free
Key data: 2500 mm, 32 mm
Manufacturer / make: WMW Schwermaschinenbau Wildau Type/ type: UBR 32 x 2500-7/16 Lagernummer / stock number: 1019 Baujahr / new in: 1969 max. sheet width: 2500 mm Bale length / convexity length of rollers: 2700 mm Max. sheet thickness ( St 50): 32 mm Max. sheet thickness ( St 34): 39 mm min. sheet thickness ( St 50): 8 mm Number of straightening rollers:7 rollen / rollers Number driven straightening rollers: 5 rollers Straightening roller diameter of straightening rollers: 290 mm Output straightening rollers / diameter of input / output straightening rollers: 345 mm Number of support rollers: 13 Stützrollendurchmesser / diameter of support rollers: 288 mm Oberbolenhub/ stroke of upper beam: 120 mm Straightening speed / speed of straightening: 16 m / min Hauptantrieb / rated power of main drive: 90 kW Total load: 138 kW Gewicht de ...
Blown film line especially for PP processing length: 6,300 mm width: 2,500 mm height: 4,200 mm Weight: 3.700 kg blowing capacity: 65 kg/hod. Film Thicknes: 0.015 – 0.1mm film width: 250 – 650mm Die- diameter 65 mm Winding speed: 5 – 60m/min. Power consumption: 72 kW
Year of construction 1982 for bottles up to 1.5 litres Cylinder has a 50 mm screw, The machine will be sold without blow head Good Condition, still under power!
Robuschi ES55/2P-RVP80-CAR Blower Serial: 4001 Air blower, in box, 30Kw, 3Ph
Stock# UG6379 Little used centrifugal blower fan model GF-30. Working output in range from 27000 - 32000 m3/h, at pressure 6-5,8 kPa. Driven by el motor 75 kW, 1450 rpm, 380/660 V, 50 hz. Working temperature up to 20C. New 2021. Shipping dimensions: L 205 cm x W 240 cm x H 220 cm x weight approx 1000 kg. Includes technical documentation.
Fischer 2051 (4051) Leaf blower for three-point attachment Cat. I and II, front or rear attachment. PTO drive 540 1/min. Turbine flow rate up to 300 m³ / min. . More green maintenance technology from A to Z and much more in stock - see sample photos! More objects also under > jodau > Used machines ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...
HS451, built in 1993, retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder
HW551, Extruder 55mm HDPE Single Head Up to 300cm3
HS451, built in 1993, Available with 1-fold/2-fold head/3-fold Optionally retrofit to PLC and E-extruder
Blower G3G125 – EBM – Original – HDD – Spare Part – New Part Number: HDD – L2.179.1501 for Heidelberg printing presses This part is also suitable for the following types of machines: CD 102 / CX 102, CS 92, Primefire 106, SM 102 / SX 102, SM 52 / SX 52 / PM 52 XL 105 / XL 106 L 145 / XL 162 – Installation locations – Positions: Appendix – Display – Twist - Price on request
with reinforced impeller 2800 min-1 4.0 kW B3 400/690 V IE 3 Max: 3200 min-1 T-max. 70°C incl. spare impeller Year of Make: 2019 Operating and assembly instructions available Weight approx. 76 kg
Blowing machine SIG Corpoplast 12 with 12 cavities Type BLOMAX 12 Neck finish: PCO 28 - 1881 Capacity: approx.: 22.500 bph incl. preform hopper incl. preform feeding system + chiller The machine was complete overhauled in 2023, incl. all blowing stations incl. all change by the oven (all maintenance records available on request) Price for the complete reconditioning in 2023 was approx. EUR 80.000,00. The machine was in production with the following preforms: - 500 ml - 13,5 g - 1000 ml - 38 g The machine will be sold without moulds. Working hours: 94000 hours
For containers up to 30 ltr. Continuous extrusion. Clamping force 30 tons. With waste punch and handover
Year 1999 Tonnage: 180 T Tray dimensions: 1020 x 1600 mm Max mould height: 2000 mm Max mould width: 1200 mm Min mould thickness: 840 mm Max mold opening stroke: 895 mm Screw diameter: 120 mm L/D ratio: 28 Maximum extrudable weight in PE: 19000 Gr Maximum injectable volume: 25 liters Number of parison regulation points: 100 Die Min/max diameter: 190/450
maximum number of results exceeded
please refine your search
100 € 
