We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,918 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Used PET Blower Siapi 2004 type EASP 20 Italy This is a complete blow molding machine which was not in use for the last 3 years Blower speed 2 500 bph for 2 L bottles The machine has 2 cavities for neck sizes 28 38 mm This Siapi Blower can be tested with a dry run Weight blower 5 000 kg elevator 250 kg positioner 250 kg All the necessary technical documentation for this machine is available Required installed power 120 kW Compressor Tempo Tehnika 350 2004 Specs 1100 rpm 75 kW 42 bar Dehumidifier Bode du 37 type 309 2006 Compressed air tank 1 000 L Compressor cooler MTA rwd 150 2004 Machine cooler Euri chiller gc 2004 The compressor is included in this PET blow molding machine or it can be bought separately Air transport cca 100m Europool Italy For bottles with a neck 28 and 38 mm This blow molding machine complete with compressor and air conveyors is in excellent condition [...for more i ...
used
Used Blow Molding Machine Sipa 8 4 3500 BPH This blow molding machine was manufactured in 2001 by SIPA and is the 8 4 linear type with 4 cavities It reaches a speed of 3500 BPH and has two neck types including corvaglia and 29 21 neck The machine has all its user manuals and its safeguards It is in operation for one shift for only 6 months per year It is currently in production and was regularly maintained Its bottles sizes are 1 5 L and 1 L for oil Has pressure oil neck equipment Has a total of 5 molds Neither the compressor nor the chiller is included This linear blow molding machine is kept in working condition and is ready for sale [...for more information send your inquiry to the seller.] refno: SO95
used
Used Blow Molding Machine Blomax 14 2004 For businesses looking to invest in a cost effective high speed blow molding machine we re pleased to offer a used KHS Blomax 14 model from 2004 This machine is specifically designed to produce PET containers and has a remarkable speed of 18000 BPH The standard mould hanger can cover bottlevolumes from 0 1 to 3 0 liters Special sizescan also be produced Equipped with 14 cavities and a range of features including a preform loader preform tipper and preform unscrambler this machine offers excellent value for money Additionally it has a PCO1881 preform neck type and air recovery system to improve efficiency This Blomax 14 is a rotary type machine and is currently in production making it an excellent option for businesses looking to expand their production capacity Although it doesn t come with a compressor or chiller it is still a reliable and effici ...
used
Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale, maximum capacity of 3.000 bottles per hour with zero working hours completed in 2011. The machine was dry cycled and tested by a Tetra-Pak (Sidel) technician. The machine has the following components: 1. Main PET bottles blow moulding module 2. Silo with elevator for preforms 3. Chiller for cooling MTA-TAE 051 4. Moulds lifting device The moulds are not included in the price. The price given is Ex-Works our warehouse. The Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale with two moulds, serial nr. 40102/2542, maximum capacity of 3.000 bottles per hour with zero working hours, and size of bottles between 0 and 2 liters. The machine was completed, dry-cycled and tested in 2011. It does not come with a pressure compressor. The machine does the movements with a press. The mould was ...
used
Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...
used
The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons
Up for sale is a used Sidel blow-moulder model SBO 18. It is in a very good used condition and immediately available. Blow-moulder Make: Sidel Model: SBO 18 Version: Series 2 Capacity: 28000 bph with 1500 ml Condition: very good used condition Inclusive: preform hopper, preform conveyor and approx. 100 m air conveyor
used
Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds
used
This EXTRAPLAST 140to Blow Moulding machine was manufactured in the year 2015. It is equipped with a it-AUTEC Blow Control. The machine has a clamping force of 1400 kN. See tech specs details in attached PDF (German).
used
Various used blow molds in great condition Size: Up to 1 liter 1-2 compartment cavity Various used blow molds in super condition Size: Up to 1 liter 1-2 compartment cavity
used
PET stretch blow molder with 4 cavities, capacity up to 5,500 bottles per hour at 1 ltr bottle size 2 ltr. Spare parts, blow moulds and neck spare parts can be purchased optionally. The machine was overhauled by Flexblow and various new parts were installed. Siemens control system with English operating language. Machine already dismantled and stored
used
Overview The BLOMAX 16 blow molder was manufactured by the German company Krupp Corpoplast (now KHS) in 2000 and until recently was part of a PET filling line at a major Austrian beverage bottler. The blow molder is now becoming available as the owner is investing in a completely new line. Technical details Output: up to 24,000 bph 16 cavities Volume: 0.2 - 3.0 l Peripherals Preform feeder | Tanner AG | SBT-3012 | - Tipper Silo Lift Sorting Chute
used
Blow-off valve, blow-off valve SCHMALZ ERS ABL-VENT EVE-TR 10-50 Thread: 1 ( inch ) Spare part for vacuum pump EVE-TR Size: 10-50 New ! Dimensions: 60 x 41 x 41 mm
used
The blow moulding machine ptb120d used for producing toys, drums, jerrycans, kettles, water tanks, etc, is single station with single die head, which is specially designed for 60l as maximum volume, suitable for hdpe, pe, pp, pvc, petg and other materials for blow moulding. Specifications: Max container capacity: 60 L Number of die heads: 1 Machine dimension (LWH): 865.0 meters Total weight: Ton 35 CLAMPING UNIT Clamping force: 600 KN Platen opening stroke: 880-1780 mm Platen size: 9501000 mm Max mould size: (WH) 9501600 mm Mould thickness: 900-1100 mm POWER Total power: 200 KW Fan power for screw : 0.185 KW Air pressure: 1.0 Mpa Air consumption: 1.2 M3/min Average energy consumption: 120 KW EXTRUDER UNIT Screw diameter: 120 mm Screw L/D ratio: 30:1 L/D Plasticizing capacity: 250 Kg/hour Number of heating: 5 Zone Extruder heating power: 32 KW ...
used
Overview The machine was built by KHS Corpoplast in 2010. The machine has been decommissioned since December and can be inspected at any time. Technical data Output: 36,000 at 0.5 26,000 at 1.0 26,000 at 1.5 Formats: 500ml, 1,000ml, 1,500ml PCO 1881 Heater boxes converted for less losses Blow air recirculation to increase efficiency Scope of delivery Blow molding machine | KHS Corpoplast | Innopet Blomax 18S| 2010 Preform feeder | Tanner | - | 2010 Roller conveyor for preforms
used
Used Sipa Blow Molding Machine 1994 We have a used Sipa blow molding machine from 1994 that is currently in storage The machine is manufactured by Sipa and the model is Top 2000 The condition of the machine is not specified It comes with safety features that are available for use and there are manuals available to assist with operating and maintaining the machine The machine is designed to produce containers made from PET material and it can create containers in two formats 0 50 L and 1 0 L The machine has six cavities and features a preform loader It s not stated whether the machine comes with a preform tipper or unscrambler Additionally the machine comes equipped with a compressor and chiller The preform neck type is compatible with a press cup closer The machine has an air recovery system and is either a linear or rotary type The machine s measurements are as follows width of 8000 mm ...
used
Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.
used
Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002
used
mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2
used
Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.
used
For sale we offer a used Sidel blower, model SBO 20. It is in a very good used condition and is now available. Blow machine Manufacturer: Sidel Model: SBO 20 Capacity: 36000 F/h at 1500 ml Engine hours: 48000 Built: 2007 Condition: in a very good used condition Included: Preform tipper, preform conveyor and approx. 100 m air transport
used
IMPCO used blow molding machines -Model : BD30 -Screw diameter : 100mm -Manufactured year `1997 & 2000 -Quantity : 2 units Produce 5 gallon (20 liter) PC bottles
used
Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use
used
AOKI SBIII-350LL-40 injection stretch blow molding machine -Manufactured year : 2005 -Location : Korea
new
Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds
used
PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.
used
AOKI One step PET injection stretch blow molding machines for jar
used
Blow volume 0.25-3.0 ltr. PET, 6 stations, up to 7,200 bottles/hour, inckl preform silo, steep conveyor and installer. Moulds, compressor and water cooler available at an additional cost. Good condition!
used
10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system
used
6 stations machine, blow volume 0.2-2.0 litre, capacity: approx. 7,200 bottles / hrs, incl. preform containers, loaders and sorters. Available at an extra cost: 0.5 + 2.0 ltr. CSD 6-speed moulds, compressor system, cooling unit
used
• Blow moulding machine SIPA mod. SF 8/4 – 4.000 bph: • Year: 1998 • Producer: SIPA • Speed (BPH): 4.000 bph • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections. • Code W 14
used
Blow molding machine SIAPI mod EA 6,000 PET bottles / h. Stamens for 0.5l, 1l, 1.5l and 2l formats. Overhauled and working
used
Blow-through lock, supply, cell lock, cell wheel lock, cell wheel lock, dosing lock used AZO Ltd. Type: Z100/2P Inlet approx.: 250 mm Height approx. 450 mm Cell wheel approx. 320 mm Cell wheel width approx. 250 mm approx. 8 cells Hole circle flange approx. 335 mm with suction filter Geared motor with variable speed LENZE 11.342.13.12 0.5 kW 3.3 to 50 rpm 220/380 V Total dimensions approx.: 1500 x 600 x 450 mm The lock was used in the food industry. Probably for transport and dosage of sugar. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
used
Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Type: SBO 4 Year of prod. 1992 Capacity: 4000 pcs/h Number of moulds in the machine: 4 Preform feeder: yes Two types of molds included: 1.5 L and 2.0 L Chiller: RIEDEL Technical condition: used
used
various blow molds available from stock. More information on request
used
Refurbished blower Werner & Pfleiderer RC 2 4260 RB Power 37 kw, 50 m³/min, 1270 mm water column Air intake 160 mm ø, GL 180° 115 mm ø blow-out, New bearings, V-belt new, With basic frame and vibration damper New engine installed (Solan )
used
This YANCED YS600 Blow Moulding Machine was manufactured in the year 2015 in Spain. The machine has a clamping force of 180 kN.
new
Original wrestler holders (Bekum) - Completely overhauled - Quick change function - Immediately available Original blow pin holders (Bekum) - Completely refurbished - Quick change funcion - Immediately available
used
Original Brass Thorn Shots (Bekum) - New - Screw thread - Immediately available - Thread M22x1 Original blow pin holders (Bekum) - New - Screw thread# - Immediately available - Thread M22x1
used
SIDEL SBO 12 serie 2 blow-moulding machine for 12 moulds. Personalization for preform neck PCO 28. The manufacturing year is 2002 and the capacity is 15.000 BPH. Machine equipped with : - Preforms tipper & hopper - Electrical cabinet - Sidel control panel The machine is no more in production and is already professionally dismantled. The machine is in good condition. If you are interested by this machine, you can contact us by mail for further information and discuss about the availability.
used
SIDEL SBO 14 Universal PET blow-moulding machine for 14 moulds. The manufacturing year is 2006 and the capacity is of 28.000 BPH. The machine is equipped with a quick change or shell moulds. Personalization for preform neck PCO28 1810. Machine equipped with: - Preforms tipper - Preforms hopper - Electrical cabinet - Sidel control panel & PCC - Air conveying system in option The machine is in very good condition which makes it a good opportunity. If you are interested by this machine, contact us for further information and to discuss the availability.
used
Blow mold for carafe, 10 liters (Flask).
used
SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately
used
Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine. Technical details Capacity: 3.600 bph 3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm space requirement approx. 9x5 m² weight: 4,5 t Operating hours: 19.935 Bottles Volume: 250 ml - 2500 ml Max. Diameter: 110 mm Scope of delivery Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).
used
Overview The machine built in 2015 by Lithuanian manufacturer FlexBlow. The machine has been overhauled and new dumper, hopper and unscrambler will be built. The machine is already disassembled. Please note that the picture of the advertisement is for reference only. Techn. Details Capacity: 5.500 bph (at 1,0l) Number of cavities: 4 Max. bottle neck: 48 mm Max. bottle size: 2,0l Previously used neck size: 38 mm Spare parts, blow molds and new set of neck specific parts can be purchased additionally Siemens controller and English operational language
used
Overview The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine. Technical details Capacity: 3.600 bph 3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm Space requirement approx. 9x5 m² Weight: 4,5 t Operating hours: 23.824 Bottles Volume: 250 ml - 2500 ml Max. Diameter: 110 mm Scope of delivery Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).
used
Overview The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l) Formats: 500ml, 750ml, 1.000ml, 1.500ml PCO 1881 Operating voltage: 400V/ 50 Hz Control voltage: 24 VDC Scope of delivery Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008 Preform feeder | Transver AG | - | 2008 Silo Elevator Sorting Chute
used
24 blow moulds for the production of bottles Bottle volume 100 ml to 2 liters German manufacturer, good condition Complete list with all dimensions available!
used
- Compact dryer module on the conveyor belt – consisting of 1 module - Function: partial blow-off of containers or closures - Place of use: after the filler, after the labeling machine or before the packer - The system is suitable for PET containers, glass bottles and cans. Because Flexidry works without compressed air and can be individually adjusted depending on the type of container, it proves to be particularly energy-efficient in daily operation. Container Area To Dry: Closure, Dating Area, Container Wall. The machine was only built for testing purposes and is therefore in mint condition.
used
Blowing machine lower: KOSME KSB 4000 YOM: 2003 Capacity: 4000 bph The unit consist of: •Preform infeed and orientation device •Blow molder KSB 4000 •Bottle discharge with air conveyor •Compressor with booster and puffer tank •Cooler M.T.A •3 set of molds