blow used for sale

pressure:400 t stroke:280 mm no. of strokes:56 Hub/min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:560 x 750 mm allowed max. force:600 t blow die to die:800 t spindle diameter:200 mm ram surface:560 x 560 mm height over floor:4,1 m power requirement:37,0 kW weight:12,0 t dimensions (WxDxH):2,2 x 2,0 x 4,25 m

Overview The aseptic PET line was manufactured by KRONES in 2006/2007. It can fill non-carbonated drinks and juices. The line is for sale, as the owner is focusing on other products in the future which do not require aseptic filling anymore. The overall condition of the line is good, as the line was regularly maintained. Tech Specs Capacity: max. 26,400 bph Suitable for still beverages Filling temperature range: 5°-20° Screw Cap 28mm and 32mm YOM 2006/2007 The Plant in Detail Manufacturer: Tanner Machine Type: Preform Tipper Manufacturer: Tanner Machine Type: Preform Feeder Manufacturer: Krones Machine Type: Stretch Blow Moulder Model: CONTIFORM S14 Manufacturer: Krones Machine Type: Aseptic Rinser/Filler/Capper    Model: PET-ASEPT Variojet/Sensometic Manufacturer: Krones Machine Type: Feeding System for Closures Manufacturer: Krones Machine Type: Inspection Unit Model: CHECKMAT 73 ...

Type: 100 FSG, built: 1986, gas operated granulating rig, spray granulator with two media nozzle, separator, heat exchanger (Manufacturer: Ohl), blowback filter K 6 R (2,4 m²), dosing unit for adding seeds. Mint condition.

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

designed for powder, made by stainless steel, with pneumatic filter cleaning, with external suction blower, function tested

Type: RHS 1 U 200 GR 360, built 1995. Centrifugal blower in special steel, 3.000 m³/h, 1,2 kp/m³, Drive: Loher, 4.500 RPM, 5,5 kW, on base frame with suction- and pressure-bellows and 7 vibration dampers, in mint condition.

Low pressure blower GMB 14.8, Y.O.M. 1994, with 11.8 m3/min. volume flow at delta-P = 360 mbar, P1 = 0.64 bar. Drive 44 kW / 1.485 UPM, with check valve, overpressure valve, tank, air filter, base and sound insulation hood.

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

Material: stainless steel Weight: 900 kg Dedusting filter Surface 31,2 m² Accessories: blower, cell wheel air-lock. Very god condition! You can also get the entire system with all components.

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

NEW MACHINE With Formatschiebetisch 2, 60m Saw blade 250-315 mm Swivel: 90 °-45 ° Planing width 410 mm 4 cutter Blade (no setting more) Dressing table length of 1800 mm Clearance height of 4-225 mm Milling cutter: 90 °-45 ° swivel to the rear Blower rpm: 3000/4000/5000/6000 / 8000 and 10000 RPM Vertical lift 160 mm Engine power: 3 engines 3 KW400 V (4,0 PS) S1 100% continuous operation WJ-500300 Special price: NET Options: Before scoring unit with motor Guide fence 900 mm Integral safety rail 500 mm Westcott Chuck 0-16mm Milling Eccentric clamp Right - and left-hand rotation (BUR) Engine 4.0 KW (5.5 HP) S1 100% Planer blade 410 HSS G & WJ-BA-410-HSS

Specifications (manufacturer): -Manufacturer: Miele / Germany -Model/type: T 6250 - Fabrikationsnr.: 25375347 -Part No.: 52625001 -Built in _ -electrical connection: 3 ~ 380V 50 Hz 10.0 A -electric power consumption approx. 14.30 kW -Re circulation dryer exhaust air recirculation with automatic reversing system -Drying capacity: 10 kg in 35 min cupboard dry -electronic measurement of residual moisture -large filter with optical display -Crease protection -Capacity dry: 10 kg / filling ratio 1:25 / 1:20 -Evaporation performance max 13,5 L / h -2 Motors (drive and blower) -Drum capacity: 250 L -Heating capacity: 13, 5kw switchable to 9kw -Exhaust air connection 150 mm -Dimensions (Lxwxh): approx. 900 x 805 x 1390mm -Weight 147 kg

Engine power: 400V 2 PS S1 Planing width 260 / 300 mm Drum: 3-Tersamesserwelle Dressing table length: 1040 mm / 1200 mm Clearance height: 3-200 mm Formatschiebetisch: 1070mm be hemline Cutting height: 80 mm Saw-45 ° 90 ° swivel Milling machine 90 ° starr Blower rpm: Speed of 4200-6300 rpm or 5000-7500 RPM G & STÜ 5500027 260mm planing width! SPECIAL PRICE NET OF 3599.- G & STÜ 5500030 300mm planing width! SPECIAL PRICE NET OF 3999,-

- Hobelbreite 50 - 400 mm - Hobelhöhe 10 - 300 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - 6 Spindeln - untere Welle min. / max. Werkzeug FI 160 /180 mm - rechte Welle min. / max. Werkzeug FI 160 /230 mm - linke Welle min. / max. Werkzeug FI 160 /230 mm - obere Welle min. / max. Werkzeug FI 160 /230 mm - 2. obere Welle min. / max. Werkzeug FI 160 /230 mm - untere Welle min. / max. Werkzeug FI 160 /230 mm -max. Sägeblattdurchmesser 2. obere Welle 300 mm Motorleistung: 1. unten 15,0 kW 2. rechte 11,0 kW 3. linke 11,0 kW 4. oben 15,0 kW 5. oben 15,0 kW 6. unten 15,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 94,5 kW - Jointer obere Wellen und unter Welle - horizontale Wellen mit Gegenlager / Hydrospannung - obere Welle elektrisch verstellbar mit Vorschubsystem mit Digitaler Anzeige - linke Welle elektrisch verstellb ...

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

The Solid wall pan , with no perforations , makes it possible to process all sizes and shapes of product without clogging . The shape , combined with the surface smoothness , bring a perfect mixing of the cores and a uniform distribution of the coating material . An exclusive , patented drying system . Two paddles immersed in the core bed guarantee that the drying air is conveyed directly through the tablet mass, thus avoiding swirls and turbulence inside the pan. Either blowing or exhausting paddles can be used, depending on the process requirements. e use of different sizes of paddles guarantees high flexibility in terms of pan working capacity. Spray guns : Both Sugar and Film spray guns can be easily fitted on the sliding support arm, which can be rapidly removed from the front door of the pan, allowing their calibration/adjustment and fast, safe cleaning and sanitizing operations. T ...

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...

Pocket-type dust filter with 15 m? filtering surface, cleaning by 0,25 kW vibrator. Designed as silo-based filter for overpressure silos, incl. many new parts. Filter can be retrofitted with blower (0,75 - 2,2 kW), feet and dust collectionbin as an independent dedusting unit.

Lauber Energy Use Centre for 4 containers. The plant is abandoned due to conversion of the production. We replace our steam engine with a turbine, which is why most of the waste heat is eliminated. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) The system consists of: Intake hopper for air incl. dust filter Blower unit Heater 370kW Funnel for air flow incl. 4 shut ...

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

Weibert W7-32 professional new 5 x combination machine It should already be a Waleed! new Formatschiebetisch Pro 2300mm planing width: 320 mm Engine power: 3 400V Motors 3 KW (S1) Dressing table length: 1500 mm Drum: 3-knife-shaft of turn of the Opening of 4-230mm Cutting height: 103 mm blade 315 mm Swivel 90 °-45 ° Milling cutter: starr 90° Blower rpm: 1400/3500/6000 and 8000 U/min SPECIAL PRICE for questions regarding the machine tel. 01717100222 or 06024-80707

Power range: 200 - 320 kW Rated heat output: 320 kW Maximum permissible operating overpressure: 4 bar Maximum permissible operating temperature: 120°C Length: 3250 mm Width: 2500 mm Height: 2440 mm Diameter of exhaust pipe: 300 mm Fire room volume: 0.77 m3 Power of the combustion air blower: 0.4 kW Power of the rust drive: 0.12 kW Smoke fan power: 2.2 kW Fuels: residual wood (wood chips with and without bark, coarse and fine content max. 20%, main part 60-100%) Fuels according to 1.BlmSchV of 15 July 1988 Water content of the fuel: W20-W40 (dry to moist) Fuel size: G30,G50 (fine wood, medium chip) Feeding: Automatic (manually possible by filling door in emergency mode) The plant is offered with the following attachments: • Insertion unit with insertion screw, motor and attached rotary valve (measurement from boiler output: 1000mm (length) 700m (height with rotary ...

GLIMEK Conical Rounder CR-400 GM - exhibition machine, brand-new condition, year of manufacture: 2022 - weight range 30 - 2.000 g, capacity range up to 3.600 pieces per hour, centrally adjustable track system, non-stick coating on cone and tracks, infeed at 6'00, outfeed at 12'00, track base plates made of food safe plastic, frequency converter drive for the cone speed, hot and cold air blowing unit, mechanical flour duster from stainless steel, 5 m connection cable and CEE-plug, power supply: 2.8 kW electrical connection: 400V/50-60 Hz/3~

1 KUSTERS 2-bowl rolling calender type 212.70-3200, 3200 mm Working Width (3400 mm face roller width), year 1993, top bowl chromed steel (thermal oil heated) diameter 450 mm, bottom bowl Racolan (S-roll) diameter 500 mm, Pressure 300 Newton/mm = 96 tons, maximum speed 100 m/min., maximum heating temperature 250 ºC, entry with metal detector, ELECTROTEX seam detector with automatic seam passage, exit by A-frame contact winder max. 1800 mm diameter, blower for cooling the bottom roller, water cooling system for edge of racolan sleeve, cooling rollers before exit, machine is controlled through SIEMES PLC, electronic speed control through MENTOR II digital drive, voltage 380V, 50 Hz, machine supplied with spare racolan sleeve and technical documentation

Filter area: 6.5 m2 Material: polypropylene Total width with filtrate pipe and valves: approx. 2.3 m Total length: approx. 8.9 m Total height: approx. 1.9 m Weight: approx. 5.5 t Effective belt width: 1.0 m Effective belt length: 6.5 m Belt forward stroke: 0.5 m Filtrate zones: 13 zones a 0.5 m Zone arrangement selected (variable): zone 1-2 filtration zone 3-4 1st wash (overflow weir) zone 5-6 2nd wash (overflow weir) zone 7-9 3rd wash (nozzle system) zone 10-11 steaming zone 12 pressing & blowing zone 13 dewatering

The filter is designed in modular design consisting of the feeding and discharge part and also of one central part. On these modules vacuum trays are mounted, which are divided into individual filtrate zones, the length of which corresponds to the belt forward stroke. The individual modules are bolted to each other. It will be possible to change the filter area later on by addition or removal of one or several modules. Each module consists of the frame, the vacuum tray and various devices for belt transport, feeding, and discharge of the media, cake discharge and filter belt cleaning. Total width with filtrate pipe and valves: approx. 2.3 m Total length: approx. 8.9 m Total height: approx. 1.9 m Weight: approx. 5.5 t Effective belt width: 1.0 m Effective belt length: 6.5 m Belt fo ...

Engine power: 400V 3 KW 4 HP, 2 engines Formatschiebetisch: 1500mm Cutting height: 103 mm Blade: swivel, max. 315 mm Milling cutter: starr 90° Blower rpm: Rpm: 1500/3500/6000/8000 RPM. WJ-400100 K NET 2990,-new

Hopper loaders with separate blower switching box with timer control different capacities available

Used burn-in tunnel kiln for drying or burning products made of glass, ceramics or similar things. A total of up to 8 ovens are for sale. The belt furnaces were installed in a system for the glass foam (foam shading) production and were in use until the demo days of the complete plant. We also continue to have components of the plant, such as mills, mixers, silos, and conveyor technology. Manufacturer: MUT GmbH Jena Type: BDO 100-150 Built: 2003 Max Temp. 1100°C Connection value: 315 kW Control SIEMENS S7 -300 Length approx. 14 m Internal dimensions: approx. 300 x 1000 mm The ovens can also be used for tempering, glazing, sintering, blowing, drying and cooling of powdery or chunky goods.

Various spare parts for SOMOS dryers e.g.: gear wheels, electrical parts, desiccant Chambers, filter elements, blowers, heating elements, motros, sight glasses, turbines, magnetic valves or cylinders can be offered on demand.

SOMOS conveying units, different types completely overhauled with 1 year guarantee Material conveyor, filter unit and blower with several accessories, as well as spare parts package can be offered on demand

SOMOS centrally controlled conveying system with micro-processed graphic display Automatic control of up to 32 injection moulding machines completely overhauled with 1 year guarantee Material conveyor, filter unit and blower with several accessories, as well as spare parts package can be offered on demand

Private sale Item condition: maintained Availability: immediately Coating band: yes ChocoTemper is part of the product line of the ICB Tecnologie chocolate temperature control device, with a tub capacity of 24 kg. Both machines can be equipped with vibrating table, while the coat straps for Chocotemper 24 are available • Stable stainless steel frame • Two independent motors, one for the screw and one for the agitator, for a longer life • Standard, removeable screw for easy cleaning and a quick change of chocolate • Control of the chocolate flow with pedal possible • Touchscreen control panel with various options: - Automatic dosages for a good way to do the right chocolate. - Night mode to keep the chocolate dissolved and reduce consumption during downtimes. - Counter-rotation of the screw, which is useful during cleaning The Chocotemper 24 chocolate temperature contro ...

SOMOS centrally controlled conveying system M40 with micro-processed graphic display Automatic control of up to 40 injection moulding machines completely overhauled with 1 year guarantee Material conveyor, filter unit and blower with several accessories, as well as spare parts package can be offered on demand

Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...

WEIBERT WJ-SAe-FR2 2.3 3-3.2 Formatschiebetisch: 2300 mm to 3200 mm) Cutting height: 103 mm Blade 90 °-45 ° swiveling. 315 mm Scoring unit: separate drive Milling spindle: swivel Blower RPM & #65279;: 1400/3500/6000 and 8000 min. Motor power: 5KW streaked 400V 50 Hz Saw: 4KW OPTIONS for an additional fee available! Integral safety rail 500 mm Left and right rotation Suction pipe with suction hose Degree grid system on the boom G & WJ-SAe-FR2 2.3/3.0/3, 2m SPECIAL PRICE PLEASE REQUESTS! OPTIONS for an additional fee available!

Engine power: 400V 3 KW 4 HP, 2 engines Formatschiebetisch: 1500mm Cutting height: 103 mm Blade: swivel, max. 315 mm Milling cutter: starr 90° Blower rpm: Rpm: 1500/3500/6000/8000 RPM. WJ 400100

Stationary air compressor Lutos Oil-free air blower Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Hosokawa Alpine 250 TTSP air classifier specifically designed to produce the perfect fineness cut for toner, can be used in connection with the Alpine 630 TFG jet mill Design: non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: 250 TTSP with 2 x 5,5kW motors, process gas distributor, filter, blower

Air-separator for hard material, drum diameter x width: 1,400 x 1,200 mm, feeder 1,000 x 1,500 mm with vibrator, blower with approximately 7,000 cbm flow, including steel-frame, machine is to separate heavy material from light one

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Classifier jet mill Hosokawa Alpine 630 TFG specifically designed for toner grinding, can be used together with the Alpine 250 TTSP air classifier to produce the perfect product. Design: non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: 630 TFG with 18,5kW motor, process gas distributor, rotary valve, filter, rotary valve, blower, control cabinet

Suction blowers 11 kW approx. 1200 mm direct drive

VESPA 30/60/18.5 VGA Cutting mill for plastics 18.5 KW, 200-300 kg/h. Insertion opening mm: 620×400 Rotor diameter mm: 300 Throughput kg/h: 200-300 Rotor blade quantity/mm: 6 x 300 Stator knife quantity/mm: 4 x 300 Engine KW: 18,5 Dimensions mm: 1210×1000×1925 Weight kg: 1500 options: Material conveying blower 4.0 kW and Big Bag filling station. Soundproofing can also be ordered at an additional cost. VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self-aligning roller bearing, which is arranged in the bearing housing outside the cutting chamber. – Easy access to the knives. Knife made of high-quality tool steel with pre ...

Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. Cutting mill VESPA 18/32/5.5 kW VGA for plastics, cable 5.5 KW, 60-80 kg/h. Model: VESPA18/32/5.5 kW VGA Throughput Kg/h: 60-80 Rotor diameter мм: 180 Rotor knife quantity/dimensions piece x mm: 6×160 Stator Knife Quantity/Dimensions Piece x mm: 4×160 Motor kW: 5.5 Weight Kg: 400 options: With material conveying blower and Big Bag filling station Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. Dimensions (mm) A 860 B-620 C-1480 D 1250 E 325 F 220

Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. 40/80/30 VGA granulator for plastics 30 KW, 350-600 kg/h. Model: VESPA 40/80/30 kWt VGA Throughput Kg/h: 350-600 Rotor diameter мм: 400 Rotor knife quantity/dimensions piece x mm: 6×400 Stator knife quantity/dimensions piece x mm: 4×400 Motor kW: 30 Weight Kg: 1960 options: With material conveying blower and Big Bag filling station Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. Dimensions (mm) A 1520 B-1430 C-2420 D 1910 E 820 F 500

VESPA 40/60/30 VGA Granulator for plastics 30 KW, 300-500 kg/h. Insertion opening mm: 620×500 Rotor diameter mm: 400 Throughput kg/h: 300-500 Rotor blade quantity/mm: 6 x 300 Stator knife quantity/mm: 4 x 300 Motor KW: 30,0 Dimensions mm: 1540x1190x2280 Weight kg: 1760 options: Material conveying blower 4.0 | 5.5 | 7.5 | 11 kW and Big Bag filling station. Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.

VESPA 35/50/15 VGA Cutting mill for plastics 15 KW, 150-250 kg/h. Insertion opening mm: 520×380 Rotor diameter mm: 350 Throughput kg/h: 150-250 Rotor blade quantity/mm: 6 x 250 Stator knife quantity/mm: 4 x 250 Motor KW: 15,0 Dimensions mm: 1180x880x1970 Weight kg: 1150 options: With material conveying blower 4.0 kW and big bag filling station. Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self ...