blow moulding machine used for sale

Number Of Stations: 32 // Output (caps/min): 500

Number Of Stations: 24 // Output (caps/min): 600

Manni 2500×1300 Shelf Press Shelf length 2500mm Shelf width 1300mm Press on 4 cylinders Shelves heated with CO water

used injection molding tool (mould) for 5,5 bucket with lid (separate mould) height (opening) 54 cm / width 61 cm / length 54 cm

used injection molding tool (mould) for 2 L bucket with lid (separate mould)

Clamping force: 1000 kN. Distance between tie bars: 470 x 470 mm. Platen size: 637 x 637 mm. Max. mould height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Shot volume: 675 cm³. Operating voltage: 400 V – 3 Ph – 50 Hz. Heating capacity: 14.9 kW. Pump motor: 1 x 22.00 kW. Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h. 2140 mm. Machine weight: 5400 kg. Serial number: 187133 – Machine 9

CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location :, Use: Cheese Cooking, Stretching and Moulding

- Rotary crown wrapper. - Crown diameter 250 mm. - Variable crown speed. - Variable feed speed. - Maximum dimensions of the workpiece approx. 170 x 70 mm. - Upper pneumatic grippers to stabilize the piece. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-728

- Total installed power 2.50 KW. - Adjustable feed speed. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-711

- Total installed power 2.30 KW. - Variable feed speed. - Variable crown speed. - Maximum dimensions of the piece 120 x 120 mm / 160 x 80 mm. - Minimum dimensions of the piece 20 x 20 mm. - Upper pneumatic grippers to stabilize the piece. - A TOLINTEMA MM 210 roller transfer is included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-703

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

Blowing machine Sidel Model SBO 18 Built in 2001 Power: 26,500 B/H Engine hours approx 44,000

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour

Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds

PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit

PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.

10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

This pharmaceutical grade bottle washing machine has been designed to meet the needs of the most demanding customers and to comply with international standards in order to provide high level performance along with easy access to components, all in a small footprint. This rotary washing system was developed and designed keeping in mind the high level of cleanliness required in the pharmaceutical industry. High washing and rinsing performance. Small footprint, size and utility consumption. The washing chamber is made entirely of stainless steel and is surrounded by a Plexiglass cover. Presence of an electrical panel for easy control management.

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

Key data: 2500 mm, 32 mm

Manufacturer / make: WMW Schwermaschinenbau Wildau Type/ type: UBR 32 x 2500-7/16 Lagernummer / stock number: 1019 Baujahr / new in: 1969 max. sheet width: 2500 mm Bale length / convexity length of rollers: 2700 mm Max. sheet thickness ( St 50): 32 mm Max. sheet thickness ( St 34): 39 mm min. sheet thickness ( St 50): 8 mm Number of straightening rollers:7 rollen / rollers Number driven straightening rollers: 5 rollers Straightening roller diameter of straightening rollers: 290 mm Output straightening rollers / diameter of input / output straightening rollers: 345 mm Number of support rollers: 13 Stützrollendurchmesser / diameter of support rollers: 288 mm Oberbolenhub/ stroke of upper beam: 120 mm Straightening speed / speed of straightening: 16 m / min Hauptantrieb / rated power of main drive: 90 kW Total load: 138 kW Gewicht de ...

Blowing machine SIG Corpoplast 12 with 12 cavities Type BLOMAX 12 Neck finish: PCO 28 - 1881 Capacity: approx.: 22.500 bph incl. preform hopper incl. preform feeding system + chiller The machine was complete overhauled in 2023, incl. all blowing stations incl. all change by the oven (all maintenance records available on request) Price for the complete reconditioning in 2023 was approx. EUR 80.000,00. The machine was in production with the following preforms: - 500 ml - 13,5 g - 1000 ml - 38 g The machine will be sold without moulds. Working hours: 94000 hours

Year 1990 retrofitted to 2006 Type: S80 Power: 100 kw Clamping force: 80 Tons Passage between columns: 1400 x 800 mm Tray dimensions: 1800 x 1200 mm Minimum mould thickness max: 800 – 1200 mm Maximum mould width: 1200 mm Minimum mould height max: 500 – 1100 mm Total opening of trays: 2000 mm Minimum die diameter: 150-350 mm Hydraulic servo control: 6 spool valves Pneumatic servo control: 17 distributors Screw diameter: 100 mm 23LD Material throughput: 360 kg/hour Parison Regulation: MOOG 400 points Blowing rods: low position Accumulation weight: 8KG/HDPE

Year 1999 Tonnage: 180 T Tray dimensions: 1020 x 1600 mm Max mould height: 2000 mm Max mould width: 1200 mm Min mould thickness: 840 mm Max mold opening stroke: 895 mm Screw diameter: 120 mm L/D ratio: 28 Maximum extrudable weight in PE: 19000 Gr Maximum injectable volume: 25 liters Number of parison regulation points: 100 Die Min/max diameter: 190/450

• Fully automatic machine for cleaning (blowing out) bottles using compressed air • Running direction from left to right • Connection pressure 6-9 bar, working pressure 0.5-3.0 bar • Output max. 12,000 bottles/h • Bottles are rotated 180° so that the openings point downwards. Blow-out needles plunge into the interior of the bottles • Pressure sensor for checking the correct blow-out pressure • Extraction of blow-out air and residues below the bottles • HMI Siemens Simatic Touch Panel • PLC Siemens S7-300 • With format set for 10 ml vials (diam. 25.3 x 46.2 and diam. 24.0 x 45.0, other format sets on request) • Connection 230/400V/50Hz • Has worked together with bottle unscrambler 02-0746 (see pdf)

for the production of 27,000 bottles per hour. With shape

for production up to 28,000 bottles per hour. Good condition. Can be supplied with mould

Brand manufacturer: SIDEL Type : SBO 6/10 Serie 1 Machine currently in overhauling process Capacity: 7.200 BPH Number of moulds: 6 Equipped : quick change for shell moulds Oven type : linear with 10 heating modules Neck personalization: PCO 28 in 1810 can be modified to yours Machine equipped with: - Sidel preforms hopper & feeder - Sidel electrical cabinet - optionally we can supply new molds as per your drawing The machine will be supplied after overhauling with guarantee.

Inv. Num. : 6499 Type: TVA-30L Producer: TONVA Created: 2019 Parameters: Switch-on hours: 8000 h Clamping force: 250 kN Injection Molding Stroke: 550 mm Height of the clamping plate: 900 mm Clamping plate width: 950 mm Screw diameter: 80 mm Material: PE Container capacity: 30 l Capacity: 90-100 kg Number of heating zones: 4 pieces Machine length: 4800 mm Machine width: 2200 mm Machine height: 3300 mm Spraying weight: 10000 kg Equipment: MAGUIRE PRS-20 Mill

Used KHS PET stretch blow molder, year of manufacture: 2016, type: Inno PET Blomax 10S, 10 cavities, output approx. 14,000 - 22,000 bottles / hour, PCO 1810, currently set up to 0.5 - 1.5, optionally with air transport. Used KHS Blow Molding PET Blowing Machine, Year: 2016, Type: Inno PET Blomax 10S, 10 cavities, Range of capacity 14.000 - 22.000 bph, Bottle Neck PCO 1810, now adjusted to 0.5 - 1.5 / 500ml - 1.500ml, optional PET bair conveyors available.

Souffleuse - machine d'extrusion soufflage BEKUM BA 200 Tête D'accumulation de 8 l 1 tete et 1 station Matériau transformé: PE Capacité de production: 500 kg / h Type d'extrudeuse: Accumulator Rsbpmev Hpnre If Hisu Nombre d'extrudeuse : 1 Diamètre de la vis : 120 mm Rapport L/D: 24 Contrôle de l' épaisseur: oui alimentation matière Course d'ouverture : 710 mm Force de serrage : 800 KN

PET Blow Moulding Machine - MAG PLASTIC The ideal blowing solution for PET bottles Year : 1994 Type : SSB 40 Input voltage : three-phase 400 V Frequency : 50 or 60 Hz ± 5% Total installed power : 86 kW (Option 102 kW) Weight: Approximately 5000 kg Number of molds: 4 Clamping force : 250 KN Total opening stroke : 120 mm

MACHINE À INJECTION - SOUFFLAGE PROCREA TYPE Rev 300 Cette machine d’injection soufflage PROCREA REV 300 peut produire des récipients à corps creux complètement finis, sans déchets comme moulés en injection avec différentes matières plastiques, avec des cycles complètement automatique, capacité de 50 cc. à 15 litres et poids de 20 gr. à 700 gr. Cette machine est prédisposée pour fonctionner avec des moules de 1 à 8 empreintes et la production est très élevée grâce au système à revolver qui accomplit toutes les opérations d'injection, soufflage et éjection de la pièce finie dans un seul stade. La construction des moules pour la Rev 300 est très simple grâce au système automatique d'extraction appliqué au revolver.

KAUTEX KCC30 Extrusion Blow Molding Machine / Extruder Year: 2012 Number of operating hours: 33000 hours 1 position Robot Kautex Clamping force: 300 KN Screw diameter: 90 mm 4 KG Accumulation Head (HDPE) Tray dimensions: 530 x 700 mm Distance between trays: 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Command: Blow command Head Type: Vertical Head with Hydraulic Accumulator Maximum container volume: 30 litres Die diameter: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 M3/h Air pressure: 6 - 10 bar Installed power: 20 KW Number of temperature zones: 5

Sidel SBO 6 series 2 manufacturing year 2000 with full upgrade by Sidel 2024 Capacity 7.800 bph Set for quick change molds Personnalisation for preform neck 29/21 Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel Caterpillar oven & blowing wheel for 6 molds Solenoid valves Sidel Universal type Retrofit of elongation sensor PCC Sidel version V2.02 Sidel electrical cabinet Machine in production till end November 2025 Excellent blowing machine

Kosme KSB6R rotative PET blow moulding machine manufacturing year 2008 with full upgrade by Kosme in 2024 with linear oven and 8 heating modules rotative blowing wheel for 6 quick change molds personnalisation for preform neck 21/29 Machine equipped with: -pallet preform tipper and hopper -preform elevator & conveying system, -preform unscrambler & preform infeed rail -Kosme linear oven & rotative blowing wheel -Kosme machine control by touch screen& drive -Kosme electrical cabinet Machine in production till end November 2025 Excellent machine and opportunity

KHS InnoPET Blomax 8 blow moulding machine Manufacturing year 2009 Capacity 14.400 bph Set for 8 quick change molds Personnalisation for preform neck 29/25 still mineral water Linear oven equipped low consumption Machine composed by: - preforms pallets tipper, hopper & feeder - PCC drive & control - KHS electrical cabinet - HP air recycling system The full air conveyor system EZS is available in option. Machine very well serviced is in exceptional condition. Machine in production till end June 2026

Set of blow molds for PET blowing machine Sidel SBO Universal - 10 molds HR for heat resistent bottle 1.0 litre - 10 molds for standard bottle1.0 litre Molds were used to produce PET bottles for juices Low working hours Molds are n very good condition Available immediately Can be customised

PET bottle blow moulder, with a production capacity of up to 4000 b/h (depending on the format). For formats between 0.25lts and 3lts. Composed of: -. Furnace for heating preforms composed of 6 heating modules of 8 infrared lamps each. -. Preform Transfer Wheel -. Two-stage compressed air blowing body, low-pressure pre-blowing and subsequent high-pressure blowing. -. Bottle Transfer Wheel Delivered with pallet turner. DOCUMENTATION AVAILABLE

Blowing machine Krones Contiform 308 year of manufacturing: 2015 capacity: 18.000 bph neck size: PCO 28 - 1881 only 20.000 working hours with preform feeding system and chiller immediately available in Germany

Souffleuse MECCANOPLASTICA MP1 - D En bon état de fonctionnement Année 2000 2 postes Force de fermeture : 35 KN Volume max du contenant. : 1,5 litres Diamètre vis. : 60 mm

MACHINE À INJECTION - SOUFFLAGE PROCREA TYPE Rev 100 Cette machine d’injection soufflage PROCREA REV 100 peut produire des récipients à corps creux complètement finis, sans déchets comme moulés en injection avec différentes matières plastiques, avec des cycles complètement automatique, capacité de 5 cc. à 750 cc. et poids de 5 gr. à 100 gr. Cette machine est prédisposée pour fonctionner avec des moules de 1 à 4 empreintes et la production est très élevée grâce au système à revolver qui accomplit toutes les opérations d'injection, soufflage et éjection de la pièce finie dans un seul stade. La construction des moules pour la Rev 100 est très simple grâce au système automatique d'extraction appliqué au revolver.

Manufacturer: Kautex Model: KBS2-20/40-S90/22D Year of Manufacture: 1999 PLC control: Siemens S5 Grinder: Rapid 3545 Conveyor Material feeding system Piovan Dedusting system Piovan Automatic component gripper and scale Spare parts Control Voltage: - AC: 230 V - DC: 24 V Working Voltage (AC, 3-phase): - Drive I: 400 V - Drive II: 400 V - Heating: 400 V Frequency: 50 Hz Rated Current: - Drive I: 285 A - Heating: 70 A Maximum Fuse Rating: - Drive I: 315 A (time delay) - Heating: 100 A (fast acting) Find more here - / Contact us at -