We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,301 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Original Brass Thorn Shots (Bekum) - New - Screw thread - Immediately available - Thread M22x1 Original blow pin holders (Bekum) - New - Screw thread# - Immediately available - Thread M22x1
used
Various used blow molds in great condition Size: Up to 1 liter 1-2 compartment cavity Various used blow molds in super condition Size: Up to 1 liter 1-2 compartment cavity
used
used
Stock number: UG6350 Unused screw compressor by Airpol (PL) model K15. Machine can reach output up to 120 m3/h with pressure up to 10 bar. Power supply 15 kW. Includes 500 l tank. Machine new 2021.
used
Zenner fan // 4.7 m³ / s // Power requirement 18 KW // EX certified //
used
Urola USP-2FL Blowmoulding machine 2004 Urola double mold bottle blower of 5 lt 3,300 bottles / hour, molds and tipper included, the machine is brand new
used
Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2001 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022
used
Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022
used
Blowing machine SIDEL SBO 14 Universal year of manufacturing: 2007 neck type: 38 mm widemouth capacity: 25.200 bph incl. preform feeding system without chiller and moulds
new
Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request
used
3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881
used
Gottfert blown film extraction unit
used
Meidinger S-HRZ10C/180/750/2 Centrifugal fan Meidinger S-HRZ10C/180/750/2 Centrifugal V m³/h: 2410 Pst Pa: 28913 Pt Pa: 29329 N 1/min: 4800 Location: LG270 Year of construction: 2006 p kg/m³: 1,2 t °C: 20 Pv kW: 29,17 Engine Size: 200 Number of poles: 2 Type: B3 Rated power: 30 kW
used
The positive displacement blower is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.
used
Keller Lufttechnik MKR 063-55 Fan Air range: 37,000 Nm³/h Total pressure difference 3400 Nm³/h spec. Gas weight at 20 degrees: 1.2 kg/m³ Motor power: 55 kW Fan speed 1475 rpm Year of construction 1987 Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!
used
Rusch SB 0530 D 2HO FA XX side channel blower 8,6 kW Rusch Side channel blowers SB 0530 D 2HO FA XX No E UO 40 3333 03 001/05 EN 60034 3 P motor IP 55 50 Hz 7.5 kW 200 - 240 V / 29 A 345 - 415 V / 16.7 A 2905 rpm 60 Hz 8.6 kW 220 - 275 V / 30 A 380 - 480 V / 17.3 A 3490 rpm Weight: approx. 180 kg More side channel blowers in other sizes - new and used - can be found in our shop! International shipping costs on request!
used
used
Blow mold for carafe, 10 liters (Flask).
used
Brand: Siepla, Model: Minerva 2.2, power: 56 Kw, year: 2011. It is automatic, easy to use and simple. With horizontal design facilitating access to its different parts and maintenance. It works in continuous cycle from the loading of the preforms to the automatic unloading of the bottles. Infrared sensor that measures the temperature of each preform before entering the mold. Air recovery system being two different pressures of compressed air. It converts some of the 35bar air into 10bar air that can be used by the machine itself.
used
PET stretch blow molder with 4 cavities, capacity up to 5,500 bottles per hour at 1 ltr bottle size 2 ltr. Spare parts, blow moulds and neck spare parts can be purchased optionally. The machine was overhauled by Flexblow and various new parts were installed. Siemens control system with English operating language. Machine already dismantled and stored
used
Volume flow: 6760m³/h, temperature increase: 128°C, rotational speed: 2670/min, connected load: 88.76kW, length: 2438mm, width: 1922mm, height: 2453mm, weight: 3.8t, including documentation.
used
The GM 50 L unit can be adjusted to your performance data. If you have any questions, please do not hesitate to contact us.
used
The GM 25 S unit can be adjusted to your performance data. If you have any questions, please do not hesitate to contact us.
used
Offered is a used D 36 S Delta Hybrid unit in good condition. If you have any questions, please do not hesitate to contact us.
used
A GM 35 S Delta Blower unit is offered. The blower stage is completely overhauled. The blower power can be adjusted to your needs. If you have any questions, please do not hesitate to contact us.
used
The GM 60 S unit can be adjusted to your performance data. The blower stage is completely overhauled. If you have any questions, please do not hesitate to contact us.
used
Fuel: Natural gas Manafacture: Remko Type: VRS170 Heating power: 198 kW Air mass flow: 12,000 m³/h Mains gas pressure: 2.6 bar
used
Fuel: Natural gas Manafacture: Remko Type: VRS170 Heating power: 198 kW Air mass flow: 12,000 m³/h Mains gas pressure: 2.6 bar
used
See PDF attached
used
diameter range 8 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 20-105 mm shaft length under head 85 mm output - pieces/min 120 max. thread length 70 mm max. width across flats 14 mm
used
diameter range 4-8 mm shaft length under head 8-80 mm max. cut-off length 110 mm output pieces/min 140
used
diameter range 2-7 mm shaft length under head 120 mm cutting length 140 mm output - pieces/min 300
used
diameter range 2-4,76 mm shaft length under head 45 mm max. cut-off length 60 mm output pieces/min 470
used
diameter range 4-9 mm shaft length under head 100 mm cutting length 120 mm output pieces/min 100
used
good condition diameter range 10-20 mm shaft length under head 180 mm cutting length 230 mm output - pieces/min 45/50/56/63 press power 160 t plane of stroke 240 mm
used
diameter range 2-5,2 mm shaft length under head 120 mm cutting length 146 mm output pieces/min 105
used
diameter range 3-6 mm shaft length under head 35-120 mm max. cutting length 146 mm output- piece/min 90
used
diameter range 5,0-10 mm shaft length under head 120 mm max. cutting length 170 mm output- piece/min 130
used
diameter range 6-16 mm number of dies 4 number of stations 7 cutting length 340 mm shaft length under head 65-300 mm output - pieces/min 60-90 max. thread length 65-150 mm press power 150 to
used
diameter range 6-10 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 75 mm shaft length under head 50 mm output - pieces/min 285 max. width acros flats 17 max. thread length 50 mm
used
bushing cut-off diameter range 10-22 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 200 mm shaft length under head 160 mm output - pieces/min 60 max. thread length 95 mm max. width acros flats 32 mm
used
bushing cut-off diameter range 15 mm number of dies 4 number of stations 6 cutting length 127 mm shaft length under head 20-90 mm output - pieces/min 200 max. thred length 63,5 mm press power 130 to
used
Manufacturer: AXIS Type: 703MG7.5T Capacity: 3420 m3/h Vacuum: -270 mbar Operating pressure: 260 mbar Power: 7.5 kW
used
STM PET blowing machine for 5 to 7 liters bottles Manufacturing year 2015 low working hours Currently blowing 6 liters bottles on mould 3 cavities at 30 bar. Capacity 3.000 bph Machine equipped with: preforms hopper and feeding system loading and process of the preforms inside oven with internal grip Preform heating by IR oven with 6 heaters each heating module with 8 lamps Preform grip and transfer to the mould Stretching & blowing station Exit device of the processed bottle EPI Eco power energy saving system Chiller and HP compressor included & also full filling & downstream line Unique opportunity Available immediately
used
SIDEL type SBO 6 Serie 2 Year: 1999 Capacity: 7.800 bph Number of moulds:: 6 Equipped : quick change for shell molds Oven type : Sidel caterpillar oven Neck personalization: still mineral water 30/25 Working hours: low working hours Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel electrical cabinet & PCC including HP compressor & chiller also Sidel air conveying system Equipment in good condition Available immediately
used
Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained. Technical details Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm Weight: 15 t Operating hours: 44.736 Bottles Volume: 200 ml - 2000 ml Max. Diameter: 115 mm Max. Length: 350 mm Preforms Length: 60 - 200 mm Max. Support ring diameter: 35 mm Scope of delivery Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)
used
Overview The KSB4000 blowing machine was manufactured in 2002 by the Austrian manufacturer KOSME. This machine can produce 0.5l, 1.5l & 2.0l bottles. Technical details Capacity: 4.000 bph 4 cavities Scope of delivery Preform feeder, Three types of molds for 0.5L, 1.5L and 2.0L bottles
used
Overview The machine built in 2015 by Lithuanian manufacturer FlexBlow. The machine has been overhauled and new dumper, hopper and unscrambler will be built. The machine is already disassembled. Please note that the picture of the advertisement is for reference only. Techn. Details Capacity: 5.500 bph (at 1,0l) Number of cavities: 4 Max. bottle neck: 48 mm Max. bottle size: 2,0l Previously used neck size: 38 mm Spare parts, blow molds and new set of neck specific parts can be purchased additionally Siemens controller and English operational language
used
Overview The BLOMAX 16 blow molder was manufactured by the German company Krupp Corpoplast (now KHS) in 2000 and until recently was part of a PET filling line at a major Austrian beverage bottler. The blow molder is now becoming available as the owner is investing in a completely new line. Technical details Output: up to 24,000 bph 16 cavities Volume: 0.2 - 3.0 l Peripherals Preform feeder | Tanner AG | SBT-3012 | - Tipper Silo Lift Sorting Chute
used
Overview The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine. Technical details Capacity: 3.600 bph 3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm Space requirement approx. 9x5 m² Weight: 4,5 t Operating hours: 23.824 Bottles Volume: 250 ml - 2500 ml Max. Diameter: 110 mm Scope of delivery Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).