blow moulding for used for sale

Kosme KSB 3000, with 3 tools, achievement approx. 3300 Fl/h with 1.5 l

Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

Power: 22 m3/min., Delta P 320 = mbar, 30 kW, (10.6 kW at 1690 RPM)

; ready for operation

AERZEN rotary blower GMB 14.8 - used, reconditioned - DESCRIPTION 3-bladed fan speed with integrated pulsation reduction Basic rack with integrated discharge silencer Tensioning device for the belt drive Pressure / vacuum valve Connection box with built-in non-return valve and flange for valve and starting discharge Drive motor (three phase motor) MANUFACTURER'S SPECIFICATIONS Manufacturer: Aerzen, Germany Type: GMB 14.8 YOM: 1976 TECHNICAL DATA Intake rate: 15,5 m ³/min Flow pressure: 0,73bar (max. 1,0 bar) Delta p: 730mbar Blower rev: 1.337rpm Motor: VEM 37kW 380Volts 50Hertz 1.460rpm CONDITION used, reconditioned, ready for operation SERVICE/RECONDITIONING New pulsation silencer box, new oil, new spray painting VISIT Please visit us at any time for an inspection. Test run is possible. REMARK Large stock of used machinery and equ ...

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002

Compact blowers, used Manufacturer Aerzen Series GMa, size 13 Design Rootsverdichter More information and photos on request.

The fan speed is refurbished, can be supplied as a complete unit.

see pictures

Industry - fan / blower manufacturer: DSD air Division (today: Ferrostaal air technology GmbH) Type: Dara 1000 R Year of construction: 1992 Flow rate: 35,000 m ³/h Pressure: 6,500 PA Speed min.: 2,035 U/min Speed max.: 2,160 rpm Power: 75 kW Air density: 1.1222 kg / m ³ Maximum temperature: 90 ° C Original price: 68.000,00 € net In very good condition!

; ready for operation

Lock valve vacuum pump Status: used, tested, functional Manufacturer: Kinney Type: KT-300 D Engine: 400V equipment: mineraloil nominal suction digesters: 25 m3/h End pressure: <0.008 mbar (abs.) Including: user manual o elfilling (

Waelz Piston Pump (Rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: WA 251 Gewaehrleitung: 12 months Zubehoer: User Manual; Spare parts list; Oil filling delivery time: from stock

Waelz Piston Pump (Rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: WA 501 Gewaehrleitung: 12 months from delivery Zubehoer: User Manual; Spare parts list; Oil filling delivery time: from stock; ready for use

; ready for operation

Waelz piston pump (rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: Ruvac WS 501 Gewaehrleitung: 12 months Spare parts list; Oil filling delivery time: from stock; ready for use

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use

Waelz piston pump (rootsblowesis) Manufacturer: Pfeiffer Type: WKP 2000 A Suction suction systems: approx. 2065 m3/h engine: 5.5 KW Cat. Nr.: PP W61 000 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, user manual; ready to use

Hammer muehle with blower, filler hopper and easily changeable sieves for the wuenschte fineness of the grinding material. Hammermuehle KH3 11 kW

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use

wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 mm output: 150/300 St./min. -for steel pins-; very good

Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Auxillary blower for Wichmann WX12V28 Allweiler SNBA-M280GR43C9.2/1w12

Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 500 A Suction capacity: approx. 500 m ³/h Cat. No.: PP W31 001 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation

Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 2000 A Suction capacity: 2065 m ³/h Engine: 5.5 KW Cat. No.: PP W61 000 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation

Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation

Block vane vacuum pump status: used, tested, working Manufacturer: Kinney Type: KT-300 D Engine: 400V Resources: Mineral oil Nominal: 25 m ³/h Discharge pressure: < 0.008 mbar (ABS.) Includes: user manual Oil (mineral oil) delivery: ex works; ready for operation

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 251 Warranty: 12 months Accessories: manual; Spare parts list; Oil filling Delivery time: In stock

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 501 Warranty: 12 months after delivery Accessories: owner's manual; Spare parts list; Oil filling Delivery time: In stock; ready for operation

The blower is refurbished and can be supplied as a complete unit.

The fan speed is refurbished, all wear parts are new, can be offered as a complete unit.

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

The fan is installed in a soundproofing hood completely, the stage is refurbished.

The fan speed is refurbished, can be offered as a complete unit.

IMPCO used blow molding machines -Model : BD30 -Screw diameter : 100mm -Manufactured year `1997 & 2000 -Quantity : 2 units Produce 5 gallon (20 liter) PC bottles

The fan speed is refurbished, can be supplied as a complete unit.

The fan speeds are reconditioned, can be supplied as a complete unit, performance data according to customer specifications.

The fan speeds are reconditioned, can be supplied as a complete unit.

Side channel blowers for silos Becker SD 6 2.4 kW, 220 / 380 V, 2880 / min 4.6 cubic meters / min = 276 cubic metres / hour, 3000 mm WS, good condition. Width 40 cm, length 75 cm, height 45 cm Weight approx. 40 kg. â?¬150 pickup in 76829 Landau, or freight shipping

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

V1 0.85 cbm/s =, PT = 52.3 bar, 15 / 60 °C, n = t1 = 2.910 rpm, 1 = P1, CC, PW = 5, 58kW 198 kg/m, electric motor 7.5 kW

Blowing machine Sidel Model SBO 18 Built in 2001 Power: 26,500 B/H Engine hours approx 44,000

AOKI SBIII-350LL-40 injection stretch blow molding machine -Manufactured year : 2005 -Location : Korea

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2004, Siemens S7-400, capacity 2.0L 16000 bph - 0.5L 21500 bph, moulds potentially included 0.5 L + 2.0 L, round Petaloid base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 28 / 1810, operating hours 72958, production hours 34191. Service by Sidel and own technicians. Condition reasonable/good. With: Sidel pre-form hopper, pre-form tipper, various pneumatic conveyors Rafael/Compere, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date June 2019. Available now.

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2001, Siemens S7-400, capacity 0.5L 21500 bph, moulds potentially included 0.5 L squarround champagne base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 30/25. Service by Sidel and own technicians. Condition reasonable - oven chain incomplete, cam-card removed but new available with spares. With: Sidel pre-form hopper, pre-form tipper, various Ling Systems pneumatic conveyors, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date March 2019. Available now.

Blow volume 0.25-3.0 ltr. PET, 6 stations, up to 7,200 bottles/hour, inckl preform silo, steep conveyor and installer. Moulds, compressor and water cooler available at an additional cost. Good condition!

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour