136,867 used machines on RESALE, but how to find them? Machine Search
material width: 250 mm material thickness: 2 mm diameter: 1200 mm total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width: 100 mm material thickness: 15 mm no. of straightening rolls: 9 straightening feed: 7 m/min total power requirement: 0,75 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
radial fan, dust extraction blower, fan, extraction, dust blower -Manufacturer: TEKA, radial fan in soundproof container -Motor: 22 kW -Speed: 1460 rpm -Volume flow rate: 20,000 m³/h -Pressure: 3,000 Pa -Fan wheel: Ø 720 mm -Inlet connection: Ø 500 mm -Outlet connection: Ø 500 mm -Dimensions: 2150/1770/H2300 mm -Weight: 1051 kg
Overview This SIPA SFR 8 is an 8-cavity rotary stretch-blow moulding machine for PET bottles, built in 2009 by SIPA (Italy). It processes PET preforms into bottles of 0.5 l, 0.75 l and 1.5 l at an output of up to 12,400 bottles per hour. The blowing station is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the stretch-blow moulder of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SIPA (Italy) Model: SFR 8 Year of manufacture: 2009 Machine type: rotary stretch-blow moulder for PET bottles Number of cavities: 8 Output: up to 12,400 bottles/hour Bottle formats: 0.5 l, 0.75 l and 1.5 l Neck finish: 28 mm / 1881 (short neck) Electrical connection: 400 V, three-phase Total ...
TAWI blower model SA350/Z Motor 3 kw 2900 rpm 50 hz 220 v Transportation Information Length 750 mm Width 500 mm Height 600 mm No documentation In your state
radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg
material width: 1500 mm material thickness: 3,00 mm no. of straightening rolls: 23 between stands ca.: 1530 mm thickness min. approx.: 0,50 mm diam. of the rolls ca.: 47 mm straight. speed ca.: 0-18 m/ min barrel length ca.: 1560 mm run-in height: 1150 mm total power requirement: 23 kW weight of the machine ca.: 9,00 t dimensions of the machine ca.: 4,30 x 1,80 x 2,60 m Specifications: - Max. vertical roll gap: 20 mm (Note: scale only goes up to 15 mm) - Lower support assembly: 5-point configuration with support rollers (individually adjustable) - Upper support assembly: 5-point configuration with support rollers - Bottom roll crowning - Circulating lubrication system for gearbox and drive shafts - Infeed table and outside table included - Reversible operation - Centralized grease lubrication for leveling roll bearings - MITSUBISHI ELECTRIC frequency converter (Type A800) - 22 kW drive m ...
Holmes HR32 Blower Positive displacement air blower, HR32, with Brook Crompton 45Kw motor, RPM 1470, all mounted on frame, 3Ph
Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-50066-193
Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-50066-93
Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-50065-193
Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-50065-93
Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-50065-293
Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-50066-293
Suitable for wool-like blowing materials Auction-ID: A1-47363-55
Vial blow blower Manufacturer: Hispamec Model: S1 Year: 1995 Installed format: 20 ml bottles (25 mm slot width) Inlet and outlet conveyor width: 60mm Conveyor height from the ground: 1000mm 16-slot blowing wheels Throughput: 1000 to 2500 cycles per hour Telemechanical PLC Dimensions (W x D x H): 4160 x 960 x 2060 mm Power: 3x380V+N+T, 50Hz, 1kW Documentation: available, in French Auction-ID: A1-50259-17
Used PLASTIBLOW PB1H-D blow molding machine - Year 2008Technical Specifications & Performance DataThe Plastiblow PB1H/D is a used industrial blow molding machine designed for producing plastic bottles through extrusion blow molding. Built in 2008, this double-carriage machine is configured with a single extrusion head and is suitable for manufacturing two 1.0L bottles simultaneously. It is a practical solution for manufacturers seeking second hand industrial packaging equipment for bottle production.Manufacturer: PlastiblowModel: PB1H/DYear: 2008Speed: 1L format 600/700 bottles/hour ( 2 cavity mold) Configuration: Double carriage, single headProduction configuration: 2 bottles of 1.0L produced simultaneouslyElectrical supply: 400V, 50HzExtruder configuration marking: E50/26Conformity marking: CEAdvanced Automation & Control SystemsThe machine is equipped for operation on a 400V, 50Hz ele ...
This machine is delivered without battery and charger. The Makita UB002GZ01 is the ultimate addition to your tool arsenal when vacuuming is just not enough. This powerful 40V Max XGT cordless leaf blower offers three settings – high, mid and low – so you can always choose the right blowing power, from coarse dirt to fine dust particles. Thanks to the ergonomic design, you can work comfortably in an upright posture, without straining your back. The rubber discharge nozzle prevents electrical conduction and thus contributes to extra safety at the workplace. In addition, you can also use this blower as a vacuum cleaner with an optional dust bag, which makes it even more versatile. With a runtime of up to 192 minutes on the lowest setting (when using a 4.0 Ah battery), this tool is ideal for long-term, efficient cleaning without interruptions. (body) Auction-ID: A1-40898-1015
This machine is delivered without battery and charger. The Makita UB002GZ01 is the ultimate addition to your tool arsenal when vacuuming is just not enough. This powerful 40V Max XGT cordless leaf blower offers three settings – high, mid and low – so you can always choose the right blowing power, from coarse dirt to fine dust particles. Thanks to the ergonomic design, you can work comfortably in an upright posture, without straining your back. The rubber discharge nozzle prevents electrical conduction and thus contributes to extra safety at the workplace. In addition, you can also use this blower as a vacuum cleaner with an optional dust bag, which makes it even more versatile. With a runtime of up to 192 minutes on the lowest setting (when using a 4.0 Ah battery), this tool is ideal for long-term, efficient cleaning without interruptions. (body) Auction-ID: A1-40898-1039
Powerplus Electric leaf blower POWEG4030 - 3300 W Electric leaf blower - maximum air speed 250 km/h - garden tool Auction-ID: A1-40898-58
Used SIDEL PET Blow molding machine - Year 2010Technical Specifications & Performance DataThis Sidel PET blow molding machine, model SBO10, is designed for the rotary stretch-blow molding of PET bottles from preforms. Manufactured in 2010, the machine is configured with 10 cavities and has a stated production capacity of 14,000 bph. The Ø28 1881 neck finish is specified for the installed mold and preform configuration.Manufacturer: SidelModel: SBO10Year: 2010Production capacity: 14,000 bphNumber of cavities: 10Preform neck finish: Ø28 1881Blower footprint: 8,900 mm length x 3,200 mm widthInstalled power: 306 kWMain electrical supply: 3 x 400 V, 50/60 HzMaximum current: 452 AAdvanced Automation & Control SystemsThe machine operates from a 3 x 400 V electrical supply and is specified for 50/60 Hz operation. A 24 V remote-control circuit is indicated. Its electrical installation includes ...
Speed: 2,100 rpm Suction pressure: 1,013 bar absolute Discharge/discharge pressure: 1,713 bar absolute Capacity: 157 m³/h Equipped with electric drive and adjustable air inlet/control valve Additional information Industrial Hibon blower/air blower, suitable for pneumatic transport, aeration and moving grains, grains and similar bulk products. The installation consists of a Hibon blower with electric drive, air inlet/flow control and discharge connection. Auction-ID: A3-46126-12513
sheet width: 0250 mm coil outside dia.: 1200 mm weight max. in kg: je 1500 kg sheet thickness - min.: 0,30 mm sheet thickness - max.: 5,00 mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm between stands ca.: 260 mm speed ca.: 28 m/min. drive motor: 2,50 kW coiler: max. width of material: 250 mm range of expansion ca.: 370-430/470-530 mm brake: mechanisch height over floor: 1020 mm total power requirement: 2,70 kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 3,00 x 1,50 x 1,60 m ARKU Leveler Type 30/25/9 ARKU Double Uncoiler Type AH 1500/2/ST - Automatic circulating oil lubrication for drive shafts and leveling roll bearings - Electromagnetic clutch - Expansion range: 370–430 mm without bolt-on segments, 470–530 mm with bolt-on segments - 1 pair of driven strip feed rolls - Exit roll cradle - Max. vertical roll gap: 10 mm - Control via proximity swi ...
Key data: 120 mm, 1 mm
- Max. belt width – 120 mm - Sheet thickness - 0.1 – 1.0 mm (40 kp/mm2) - Speed 6 - 36 m / min - ( 10 cm - 60 cm/ s ) - Guideline Cross section – 100 mm2 - Conveyor inlet – left - Control – Start-Stop - Roller mill adjustment – motorized - Mobile version - Drive 0.55/0.75 kW - 750 / 1400 rot/ min - Original documents Btto – 400 kg
Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower -Type: HL8-560-A -Volume flow rate: 22800 m³/h -Total pressure: 4200 Pa -Motor: Schorch 37 kW 1470 rpm -Inlet connection: Ø 560 mm -Outlet connection: Ø 560 mm -Fan wheel: Ø 940 x 200 mm -Protection class: IP 54 -Dimensions: 2830/1230/H1700 mm -Weight: 950 kg
Weight 9 kg Dimensions 39 × 43 × 46 cm Cubic capacity 42.7 cc Drive gasoline Type of Engine 2-stroke Power 1.7 hp / 1.25 kW Idle speed 7000 rpm Air emissions 720 m3 p/hour / 12m3 p/min Air speed 252 km p/hour Fuel tank capacity 1.2 litres Mixing ratio 1:25 Type of fuel Euro 98 Type Oil 2-stroke Noise level 109 dB CE, GS, TUV quality marks in box Auction-ID: A1-40421-326
Leaf blower Kibani 76cc. in box Auction-ID: A1-40421-112
Weight 9 kg Dimensions 39 × 43 × 46 cm Cubic capacity 42.7 cc Drive gasoline Type of Engine 2-stroke Power 1.7 hp / 1.25 kW Idle speed 7000 rpm Air emissions 720 m3 p/hour / 12m3 p/min Air speed 252 km p/hour Fuel tank capacity 1.2 litres Mixing ratio 1:25 Type of fuel Euro 98 Type Oil 2-stroke Noise level 109 dB CE, GS, TUV quality marks in box Auction-ID: A1-40421-226
Weight 12 kg Dimensions 52 × 40 × 56 cm Cubic capacity 63.3 cc Drive gasoline Type of Engine 2-stroke Power 3.6 hp / 2.7 kW Max. speed 6800 rpm Air emissions 1440 m3 p/hr / 24 m3 p/min Fuel tank capacity 1.6 litres Mixing ratio 1:25 Type of fuel Euro 98 Type Oil 2-stroke Noise level 111 dB CE marks Auction-ID: A1-40421-227
Weight 9 kg Dimensions 39 × 43 × 46 cm Cubic capacity 42.7 cc Drive gasoline Type of Engine 2-stroke Power 1.7 hp / 1.25 kW Idle speed 7000 rpm Air emissions 720 m3 p/hour / 12m3 p/min Air speed 252 km p/hour Fuel tank capacity 1.2 litres Mixing ratio 1:25 Type of fuel Euro 98 Type Oil 2-stroke Noise level 109 dB CE, GS, TUV quality marks in box Auction-ID: A1-40421-325
Leaf blower Kibani 76cc. in box Auction-ID: A1-40421-228
2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-50533-319
2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-50533-318
2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-50533-4056
10 units per carton Dimensions 1000x150 mm black color Auction-ID: A1-50556-1528
Souffleuse - machine d'extrusion soufflage BEKUM BA 200 Tête d'accumulation de 8 litres 1 tete et 1 station Matériau transformé: PE Capacité de production: 500 kg / h Type d'extrudeuse : Accumulator Rsbpmev Hpnre If Hisu Nombre d'extrudeuse : 1 Diamètre de la vis : 120 mm Rapport L/D: 24 Contrôle de l' épaisseur: oui alimentation matière Course d'ouverture : 710 mm Force de serrage : 800 KN
LPG forklift, gas forklift STILL type RX 70-16TSeries No. 517314G00021 Year of construction 2016Nominal load capacity 1600 kgLifting height 4920 mmFork length 1000 mmCarriage width 980 mmOverall height 2160 mmTotal width 1100 mmTotal length without forks 2200 mmNet weight 3040 kg- Triplex mast with full free lift 1550 mm- Hydraulic sideshift- LPG electric drive- 4-cylinder Volkswagen LPG engine with 30 kW- Hydraulic auxiliary steering- Front working lights- Reversing Warning light (blue)
Electric forklift JUNGHEINRICH type EFG 216Serial No. FN413671 year of construction 2011Load capacity 1600 kgLifting height 4800 mmFork length 1220 mmFork carriage width 980 mmOverall height 2120 mmOperating voltage 48 volt- Triplex mast with full free lift 1550 mm- Hydraulic sideshifter- 2 travel speeds- Battery from year of construction 2015, Type 06 EPZS C750 SC (48 Volt, 750 Ah)- Automatic charger, 48 Volt- 3-wheel solid rubber - Front tires 18 x 7-8, rear 140/55-9- according to the operating hour meter 14725 operating hours read-
Diesel - Forklift, Compact Forklift MORA Type M80CSFabr. No. 20087 Year of construction 2006Nominal load capacity 8 ton. Lifting height 3800 mmFork length 1800 mmFork carriage width 1460 mmOverall height 3030 mmTotal width 1460 mmTotal length without forks 3350 mmWeight 12740 kg- Duplex mast with 1950 mm free lift- 4 cylinders PERKINS diesel engine- Fully enclosed cab with heating- Electro-hydraulic tilting device for the cab- Hydraulic auxiliary steering- 2 front work lights, 1 piece
Battery from former Still Service 830x730x630mm Voltage at rest measured at 49.8 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-50404-1048
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/hcG9Cnk1dJY - Very manoeuvrable machine - Former Linde full-service device - Battery: 10/2020, 24V 3PzSH 420Ah, voltage measured at rest with 24.7V - Duplex mast with full free lift - Semi-cab with windscreen - white non-marking tires - Warning light orange - with charger Auction-ID: A1-50404-551
Voltage at rest measured at 52.25 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-50404-1146
Youtube function and status video: https://youtube.com/shorts/c7ls-fPco_c FEM2: Fits any forklift with a load capacity of 1,000-2,500kg Payload: 2,200 kg Auction-ID: A1-50404-1170
Auction-ID: A3-46126-3517
Weld edge former, edge former, edge beveling machine TRUMPFFasing of steel plates for weld seam preparationType TKF 103Sheet thickness: 4 - 25 mmBevel length max: 10mmBevel angle: 30Power: 2000 wattsMains connection: 220 volts, 50 Hz- Equipped with guide bracket for 30 bevel angles - Regrindable butt steel for high tool utilization- Equipped for 20 mm sheet metalFor beveling straight and curved edges with a radius of at least 40 mm.For beveling edges on flat and curved workpieces as well as
maximum number of results exceeded
please refine your search
100 € 
