blow moulding for used for sale

Auction-ID: A1-44050-393

Key data: 60 mm, 25

Blown Film Extrusion Line: Manufacturer: Reifenhäuser / Troisdorf Type: S 100.060 Connection: 220 / 380 Volt Total connected load: approx. 100 amps Film thickness range: 30 - 80 microns max. winding width: 1200 mm Material: LDPE Extruder: Type: S60 Power: 7 to 28 kw Screw diameter: 60mm Screw length: 25D Max. output capacity: 50 kg/h Drive: Elektra Faurndau GmbH Granulate feed via vacuum conveyor Die head: rotating Type: BSR 100 - 250 mm Die insert: 150 mm and 200 mm diameter Heating capacity: 11.2 kW Cooling ring: Cooling ring inserts: 150mm and 200mm diameter Air volume control, lip adjustment Flattening and pull off device: Adjustable side boards for foil flattening Side gusset insertion device Pull-off rollers Winder: 2 digits - tandem wrapper manual winding shaft insertion device Winding System: Tangential Winder pneumatic roller lifter Max ...

Souffleuse - machine d'extrusion soufflage BEKUM BA 200 Tête D'accumulation de 8 l 1 tete et 1 station Matériau transformé: PE Capacité de production: 500 kg / h Type d'extrudeuse: Accumulator Rsbpmev Hpnre If Hisu Nombre d'extrudeuse : 1 Diamètre de la vis : 120 mm Rapport L/D: 24 Contrôle de l' épaisseur: oui alimentation matière Course d'ouverture : 710 mm Force de serrage : 800 KN

For sale is an Aerzen GM 4 S rotary lobe blower. Can be purchased as a complete unit or separately as shown in the pictures. Year of Make: 2004 Condition: Blower overhauled - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.

For sale is an Aerzen GMA 10.2 rotary lobe blower. Can also be used as a replacement for a GM 7 L. Year of Make: 2000 Condition: Refurbished - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.

For sale is an Aerzen GMA 11.3 rotary lobe blower. Can also be used as a replacement for a GM 10 S. Year of Make: 1990 Condition: Refurbished - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.

For sale is an Aerzen GMA 11.3 rotary lobe blower. Can also be used as a replacement for a GM 10 S. Year of Make: 1990 Condition: Refurbished - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.

Venti Oelde High Performance Centrifugal Fan Manufacturer: Venti Oelde Type: HRV 45-224 / R GL 360 Type: High Performance Centrifugal Fan V: 2559 m³/h 12 bar t: 300 C P: 0.608 kg/m³ Pw: 0.9 kW NV: 2840 1/min Weight: 180 kg Year of Make: 2017 More items - new and used - can be found in our shop! International shipping costs on request!

PET Blow Moulding Machine - MAG PLASTIC The ideal blowing solution for PET bottles Year : 1994 Type : SSB 40 Input voltage : three-phase 400 V Frequency : 50 or 60 Hz ± 5% Total installed power : 86 kW (Option 102 kW) Weight: Approximately 5000 kg Number of molds: 4 Clamping force : 250 KN Total opening stroke : 120 mm

General Description Industrial single-layer blown-film extrusion line manufactured by Alpine Hosokawa . Previously used for production of industrial sacks, pellet packaging film, lamination film, tubular film and semi-tubular film from virgin material. The complete line has been professionally dismantled and is ready for transport. Technical Details Manufacturer: Alpine Hosokawa Serial number: 22.5793 Year: 2006 Machine type: Monolayer blown-film extrusion line Extruder: UNEX 62/90/AL Motor: Faurndau ASM 180 L Fixed die head: Ø180 mm 3 × Contrex DE 3000 gravimetric dosing units with pumps Contrex thickness control Kündig K100 thickness control reader, S/N D.1571 IBC air-blowing tube with valve Cooling ring and 2 fans Frigomeccanica Industriale MK 20 water chiller, S/N 040438 Eurochiller Air Blow air chiller with free-cooling system Double automatic winder, width 1, ...

MACHINE À INJECTION - SOUFFLAGE PROCREA TYPE Rev 300 Cette machine d’injection soufflage PROCREA REV 300 peut produire des récipients à corps creux complètement finis, sans déchets comme moulés en injection avec différentes matières plastiques, avec des cycles complètement automatique, capacité de 50 cc. à 15 litres et poids de 20 gr. à 700 gr. Cette machine est prédisposée pour fonctionner avec des moules de 1 à 8 empreintes et la production est très élevée grâce au système à revolver qui accomplit toutes les opérations d'injection, soufflage et éjection de la pièce finie dans un seul stade. La construction des moules pour la Rev 300 est très simple grâce au système automatique d'extraction appliqué au revolver.

KAUTEX KCC30 Extrusion Blow Molding Machine / Extruder Year: 2012 Number of operating hours: 33000 hours 1 position Robot Kautex Clamping force: 300 KN Screw diameter: 90 mm 4 KG Accumulation Head (HDPE) Tray dimensions: 530 x 700 mm Distance between trays: 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Command: Blow command Head Type: Vertical Head with Hydraulic Accumulator Maximum container volume: 30 litres Die diameter: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 M3/h Air pressure: 6 - 10 bar Installed power: 20 KW Number of temperature zones: 5

Auction-ID: A1-49889-260

Sidel SBO 6 series 2 manufacturing year 2000 with full upgrade by Sidel 2024 Capacity 7.800 bph Set for quick change molds Personnalisation for preform neck 29/21 Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel Caterpillar oven & blowing wheel for 6 molds Solenoid valves Sidel Universal type Retrofit of elongation sensor PCC Sidel version V2.02 Sidel electrical cabinet Machine in production till end November 2025 Now dismantled and transfered to our warehouse Excellent PET blowing machine See video with link below

Kosme KSB6R rotative PET blow moulding machine manufacturing year 2008 with full upgrade by Kosme in 2024 with linear oven and 8 heating modules rotative blowing wheel for 6 quick change molds personnalisation for preform neck 21/29 Capacity > 10.000 bph Machine equipped with: -pallet preform tipper and hopper -preform elevator & conveying system, -preform unscrambler & preform infeed rail -Kosme linear oven & rotative blowing wheel -Kosme machine control by touch screen& drive -Kosme electrical cabinet Machine was in production till end November 2025, now professionally dismantled and transfered to our warehouse. Excellent machine and opportunity see video with below link Available immediately Very interesting pricing

Set of blow molds for PET blowing machine Sidel SBO Universal - 10 molds HR for heat resistent bottle 1.0 litre - 10 molds for standard bottle1.0 litre Molds were used to produce PET bottles for juices Low working hours Molds are n very good condition Available immediately Can be customised

Manufacturer: Aerzener Model: GM7L Year of Manufacture: 2019 Type of Machine : Positive Displacement Blower Max. Suction Pressure (abs): 1.013 bar Max. Discharge Pressure (abs): 1.413 bar Nominal Motor Power: 7.50 kW Unit Weight: 294 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Aerzener Model: GM60S Year of Manufacture: 2017 Type of Machine : Positive Displacement Blower Suction Pressure (max., abs.): 1.013 bar Discharge Pressure (max., abs.): 2.013 bar Nominal Motor Power: 132.00 kW Unit Weight: 2548 kg Certifications: CE, EAC Find more here - .ucymachines/ Contact us at - sales@ucymachines

Industrial axial fan 800mm diameter ZIEHL-ABEGG fn80-sdi.6n.v7 NEW! Sold in a box of several pieces manufacturer: ZIEHLL-ABEGG type: FN080-SDI.6N.V7 Axial fan with sickle-shaped aluminum blades Diameter: 800mm Ø airflow: 10000-21000m3/h nominal airflow: 15800m3/h at 140pa air pressure motor power: 1.15kw/0.53kw Nominal values 3. phase~400V D/Y 50Hz 1.55/0.95kW 3.3/1.7A rpm:850/650/min Protection type:IP54 sound level:70 dB COSY 0.69 max temperature range:80°C Motor protection: thermal contact Protective grid type: mesh grid Dimensions (w x h x d) mm: 861 x 861 x 273

Blowing machine Krones Contiform 308 year of manufacturing: 2015 capacity: 18.000 bph neck size: PCO 28 - 1881 only 20.000 working hours with preform feeding system and chiller immediately available in Germany

Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulates Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 μm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi's; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET  ...

Subject to prior sale - errors possible! Internal reference number: D-1143-7

Souffleuse MECCANOPLASTICA MP1 - D En bon état de fonctionnement Année 2000 2 postes Force de fermeture : 35 KN Volume max du contenant. : 1,5 litres Diamètre vis. : 60 mm

We offer a refurbished rotary lobe blower Brand: Robuschi Type: K 150 All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

We offer a refurbished rotary lobe blower Brand: Kaeser Type: Omega 63 Plus All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

MACHINE À INJECTION - SOUFFLAGE PROCREA TYPE Rev 100 Cette machine d’injection soufflage PROCREA REV 100 peut produire des récipients à corps creux complètement finis, sans déchets comme moulés en injection avec différentes matières plastiques, avec des cycles complètement automatique, capacité de 5 cc. à 750 cc. et poids de 5 gr. à 100 gr. Cette machine est prédisposée pour fonctionner avec des moules de 1 à 4 empreintes et la production est très élevée grâce au système à revolver qui accomplit toutes les opérations d'injection, soufflage et éjection de la pièce finie dans un seul stade. La construction des moules pour la Rev 100 est très simple grâce au système automatique d'extraction appliqué au revolver.

A Robuschi (Gardner Denver) blower including a rotary valve and spare blower is available. Intake volume: 403m³/h, differential pressure: 300mbar, temperature increase: 35°C, power: 5kW, speed: 3900rpm, efficiency: 84.8%, motor power: 11kW. Includes Zeppelin AG11 rotary valve and replacement blower. Documentation available. On-site viewing possible.

Manufacturer: Kautex Model: KBS2-20/40-S90/22D Year of Manufacture: 1999 PLC control: Siemens S5 Grinder: Rapid 3545 Conveyor Material feeding system Piovan Dedusting system Piovan Automatic component gripper and scale Spare parts Control Voltage: - AC: 230 V - DC: 24 V Working Voltage (AC, 3-phase): - Drive I: 400 V - Drive II: 400 V - Heating: 400 V Frequency: 50 Hz Rated Current: - Drive I: 285 A - Heating: 70 A Maximum Fuse Rating: - Drive I: 315 A (time delay) - Heating: 100 A (fast acting) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Radial duct fan for easy, direct installation in the sewer system. Housing made of galvanized sheet steel. Rated Voltage: 400V Frequency: 50Hz Phase(s): 3~ Power consumption: 1,246W Current: 2.25A Speed: 1,315 r.p.m. Volume flow: max. ; 3,168; m³/h Minimum pressure, static: 250Pa Max. conveying device temperature: max. 40°C Max. conveying device temperature at speed control: 40°C Sound pressure level in 3m: 57dB(A) Degree of protection, motor: IP44 Weight: 31 kg Rectangular channel connection, height at inlet & outlet: 300 x 600mm

material width: 0200 mm material thickness: 3,00 mm no. of straightening rolls: 21 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 30 mm speed: 56 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Hydraulic drive All rollers driven Side belt guide with handwheel PSS300 control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PET blow moulder SIDEL SBO 18 The machine was upgraded in 2006 with a new program for an output of 26,500 bph. The machine includes preform tippers for 2 octabins each. Preform steep conveyor to the inlet into the machine.

Souffleuse PLASTIBLOW type PB1 E/S électrique 1 tete , 1 poste Diamètre vis : 50 mm Année : 2008 Volume du flacon max : 1 litre Force de fermeture : 35 KN Cadence à vide : 1,5 sec Rapport L/D : 25 Consommation moyenne : 5 KW/h Puissance moteur : 18 KW Puissance de chauffe. : 6,9 KW 4 zones de chauffe 3 ventilateurs Dimensions moule : 280 mm x 325 mm x (81 + 130 + 85 ) mm Dimensions machine ( L x l x H ) : 2,35 m x 3,80 m x 2,35 m Poids : 3650 KG

Blowing machine SIPA type SFR EVO3 capacity: 18.000 bph - 0,5 ltr., 1,0 ltr., 1,5 ltr. year of manufacturing: 2017 neck type: PCO 28 - 1810 with 8 cavities incl. preform feeding system incl. preform cooling system Min. - Max. bottle diameter (diagonal): 50 - 125 mm Min. - Max. bottle height (without neck): 80 - 349 mm without high pressure compressor The machine is still in production until the beginning of February 2026.

Key data: 2 mm, 10 mm

Sheet Straightener 2,000 x 10 mm Execution.. 4high Blechdicje . 3-10 mm Straightening rollers.. 13 pcs. Straightening rollers durcm.. 145 mm Support rollers Duchm 290 mm Weight... 32,000 kg Drive mot... 30 KW

Key data: 65 mm

Qty. 1 Second-hand 3-Layer Co-Extruder Line Brand & Model: MACCHI 3-layer co-extruder Built: 2012 Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3 Layer blown film Die head TE5303-IBC-350/500 Dies diameter 350 and 400 mm IBC Die Gap: 1.8 mm Output: Up to 800 kg/hour depending on material formulation Air ring: Dual flow air ring carbon fibre Take off: Take off 2400 mm wide Oscillating nips Motorised side gusseting Rewind: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reels diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide E&L Components blander Shini Gravimetric weight control system Piovan/Doteco Dosing units Doteco Automatic Thickness control Kundig/K-Design Profile gauge control system Calibrating basket Corona-treat ...

Blowing machine SIG Corpoplast type Blomax 20 capacity: approx. 30.000 bph year of manufacturing: 2002 min. bottle volume: 200 ml max. bottle volume: 3.000 ml max. bottle diameter: 126 mm max. bottle length: 350 mm min. bottle length: 107 mm incl. preform tipper incl. preform feeding system neck size: PCO 28 incl. spare part package

inner diam. 350 mm.

Souffleuse MECCANOPLASTICA type MP1 - D En très bon état de fonctionnement Année : 2001 1 tete double et 2 postes Controleur de paraison 64 point MOOG Force de fermeture : 35 KN - 3500 kg Volume max du contenant. : 1,5 litres Diamètre vis : 60 mm 4 ventilateurs de refroidissement Puissance maximale de chauffe : 20 KW

BATTENFELD FISCHER BEKB 175 T blow molding machine - 29 kg of PE - 300 liters BATTENFELD blow-moulding machine capable of extruding parts up to 4500 mm. Machine equipped with a 40-liter accumulation head. HDPE capacity: 28.8 KG Closing force: 2 x 175 T with knee-bar locking system Machine equipped with 2 x 125 mm screws (20/D ratio) Capacity: 149 KG / H at 25 RPM Max screw speed: 40 RPM Blowing pressure: 7.5 bar (12-bar compressor available if required) 3-material volumetric screw dosing system (virgin material, regrind and colorant) Machine equipped with unloading clamp Can be sold with a RAPID GK 8045 shredder Machine sold with a 260 mm diameter die and a 300 mm die. It is possible to equip this machine with a 500 mm die.

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 15 kW - 400 V - 50 Hz - 2.950 rpm - 27,1 A. P(inlet): 1.013 hPa. P(outlet): 300 hPa. PS: 620 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 228 cfm. Sound level: 87 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

Blowing machine KRONES Contiform S 8 year of manufacturing: 2003 capacity: 14.000 bph neck size: PCO 28 - 1881 Bottle size: 1,5 ltr. PET bottle incl. cooling unit incl. preform feeding system incl. preform container incl. preform tilting device air conveyor system is available immediately available in Germany The machine is in a good condition.

Blow molding machine Kosme model: KSB 6R with 6 cavities year of manufacturing: 2017 neck size: PCO 1881 capacity: 12.000 bph container size: max. 3,0 ltr. including preform feeding system including chiller without blowing moulds already dismantled at the end of January 2026

High pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial blower, high pressure blower -Manufacturer: Spelleken, high pressure blower type VRU-15-100-30H 1 -Drive motor: Holder 3 kW -Speed: 1430 rpm -Volume output: 0.25 m³/s -Pressure pt: 49.5 mbar -Connection input: Ø 105 mm -Connection output: Ø 105 mm -Bolt circle: Ø 180 mm -Dimensions: 900/510/H910 mm -Weight: 81 kg

An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible. Expected to be available June 2026.

On behalf of our client, we are selling this KHS Blomax 16 PET blow molding machine which is designed for the automated production of PET bottles. It ran together with 2x KHS Absofill / ABF 710 machines before (one of these 2 also sold by our , .hamburg-machinery/listings/7469327-used-aseptic-pet-bottle-filling-ma chine-khs-innosept-absofill-abf-710-03). It is dismantled ± 8 years ago and is stored since in a closed warehouse. The client bought the machine used and decided not to blow bottles themselve, but buy them from another supplier, already blown. This bottle blower is direct available. Loading on the truck / inside the container will be done by the dairy factory., The machine was used to blow PET bottle for a fruit juice factory in Germany. Capacity: 28.800 bottles/h. Bottle size: min. 200 ml and max. 2.000 ml. Current bottle neck nominal diameter: 38 mm. With the same nominal bo ...

High-pressure radial fan, dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Exhaust gas exhaust fan -E-motor: Lammers 400/690 V/3 kW -Fan: Hansa Ventilatorenbau Type BC 280-5/4K-X/UX 1101 -Speed: 3179 rpm -Volume output: 2160 m³/h -Connection input: Ø 735 mm -Connection output: 365 x 310 mm -Dimensions: 1300/740/H820 mm -Weight: 153 kg

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.64 kW -Volume output: approx. 45 m³/min -Connection air duct: 285 x 140 mm -Number: 2x fan available -Price: per piece -Dimensions: 390/340/H340 mm -Weight: 12 kg