blow moulding for used for sale

Keller Lufttechnik MKR 063-55 Fan Air range: 37,000 Nm³/h Total pressure difference 3400 Nm³/h spec. Gas weight at 20 degrees: 1.2 kg/m³ Motor power: 55 kW Fan speed 1475 rpm Year of construction 1987 Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Leister, side channel vacuum pump side channel compressor -Type: G63A2 ID -Drive: 0.25 kW -Speed: 2850 rpm -Dimensions: 370/220/H225 mm -Weight: 7.9 kg

Offered is a used D 36 S Delta Hybrid unit in good condition. If you have any questions, please do not hesitate to contact us.

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor -Type: Elmo-G 2BH1 807-1AC17 -Drive: 5.50 kW -Speed: 2920 rpm -Dimensions: 680/500/H520 mm -Weight: 122 kg

The GM 60 S unit can be adjusted to your performance data. The blower stage is completely overhauled. If you have any questions, please do not hesitate to contact us.

Side channel blower, side channel blower, ring blower, vacuum pump -Drive: 1.1 kW -Speed: 2880 rpm -Connection: 1 1/2 inch -Dimensions: 420/280/H340 mm -Weight: 20 kg

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Inhouse overhauled 2015. Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately

The GM 90 S unit can be adjusted to your performance data. The blower stage is completely overhauled. If you have any questions, please do not hesitate to contact us.

radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

High-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Engine power: 0.37 kW -Performance data: not available -Connection input: Ø 65 mm -Connection output: Ø 60 mm -Dimensions: 510/480/H470 mm -Weight: 49 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor with reversing valve -Type: Elmo-G 2BH6 100-0AC12 -Drive: 2.2 kW -Speed: 2860 rpm -Dimensions: 375/335/H385 mm -Weight: 30.7 kg

Centrifugal fan 30 kW – Keller Lufttechnik MXE 125-008030 used Powerful centrifugal fan with 30 kW from Keller Lufttechnik. This used model MXE 125-008030 convinces with a high volume flow of 4,680 m³/h and a maximum pressure of 12,500 Pa. Ideal for applications with high back pressure, such as in extraction systems, filtration systems or industrial ventilation systems. Technical data Manufacturer: Keller Lufttechnik Type: MXE 125-008030 Power: 30 kW Max. air volume: 4,680 m³/h Max. pressure: 12,500 Pa Speed: 2,940 rpm Voltage: 400 V Suction opening: Ø approx. 300 mm Outlet opening: Ø approx. 200 mm Housing: insulated Dimensions: approx. 1,700 × 1,200 × 1,700 mm Pros Thanks to its robust design and high pressure output, this centrifugal fan is particularly suitable for industrial applications with long pipe routing or additional filter t ...

sheet width: 0500 mm coil outside dia.: 1400 mm weight max. in kg: 4000 kg plate thickness: 0,80 - 3,60 mm diam. of the rolls ca.: 80 mm feed rolls: 2 nomb. of straightening rolls: 7 exit pinch rolls: 2 speed: 5-30 m/min range of expansion ca.: 445 - 530 mm expansion: manuell total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket  ...

Offered is a refurbished rotary lobe blower Brand: RKR / Robuschi Type: SRB 60. All our refurbished blowers are fitted with new bearings and sealing elements. If you have any questions, please feel free to call.

The blower stage is completely overhauled and can also be offered as a complete unit.

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

Piller Blower 63790 KKX 90710 Air blower of 2018, like new, complete with control system, 1 available. 26.5 m3/s, 15 bar, 445 kW Blower Piller 63790 KKX 90710 Manufacturer: Piller Model No.: 63790 KKX 90710 Serial Number: 903736 Type: Air Blower Power [kW]: 445 Flow rate [m3/s]: 26.5 Pressure max [bar]: 15 Year of construction: 2018 Weight [kg]: 8.587

On offer is a used D 36 S Delta Hybrid engine in good condition. If you have any questions, please do not hesitate to contact us.

It is a used Hefele 6kW blower for silo systems for sale. Price on request.

sheet width: 0400 mm coil outside dia.: 1400 mm weight max. in kg: 3000 kg plate thickness: 0,80 - 4,50 mm nomb. of straightening rolls: 7 diam. of the rolls ca.: 80 mm feed rolls: 2 exit pinch rolls: 2 coil width: 600 mm range of expansion ca.: 470 - 530 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler DIMECO type 2371 E-FPS Year of construction 2006 with hydraulic spreading with pneumatic pressure roller from above with 6 pieces of band limiting arms Straightening machine DIMECO type 1676 C-VV Year of construction 2000 with frequency-controlled drive with hydraulic band insertion aid with support table, insertion tongue, Pressing arm from above with pneumatically ventilated roller with side belt guide rollers with pneumatically adjustable belt transfer table The data for this ad was created with ModulMWS - the software solution of  ...

Blown film line especially for PP processing length: 6,300 mm width: 2,500 mm height: 4,200 mm Weight: 3.700 kg blowing capacity: 65 kg/hod. Film Thicknes: 0.015 – 0.1mm film width: 250 – 650mm Die- diameter 65 mm Winding speed: 5 – 60m/min. Power consumption: 72 kW

Key data: 2500 mm, 32 mm

Manufacturer / make: WMW Schwermaschinenbau Wildau Type/ type: UBR 32 x 2500-7/16 Lagernummer / stock number: 1019 Baujahr / new in: 1969 max. sheet width: 2500 mm Bale length / convexity length of rollers: 2700 mm Max. sheet thickness ( St 50): 32 mm Max. sheet thickness ( St 34): 39 mm min. sheet thickness ( St 50): 8 mm Number of straightening rollers:7 rollen / rollers Number driven straightening rollers: 5 rollers Straightening roller diameter of straightening rollers: 290 mm Output straightening rollers / diameter of input / output straightening rollers: 345 mm Number of support rollers: 13 Stützrollendurchmesser / diameter of support rollers: 288 mm Oberbolenhub/ stroke of upper beam: 120 mm Straightening speed / speed of straightening: 16 m / min Hauptantrieb / rated power of main drive: 90 kW Total load: 138 kW Gewicht de ...

Robuschi ES55/2P-RVP80-CAR Blower Serial: 4001 Air blower, in box, 30Kw, 3Ph

Fischer 2051 (4051) Leaf blower for three-point attachment Cat. I and II, front or rear attachment. PTO drive 540 1/min. Turbine flow rate up to 300 m³ / min. . More green maintenance technology from A to Z and much more in stock - see sample photos! More objects also under > jodau > Used machines ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...

Stock# UG6379 Little used centrifugal blower fan model GF-30. Working output in range from 27000 - 32000 m3/h, at pressure 6-5,8 kPa. Driven by el motor 75 kW, 1450 rpm, 380/660 V, 50 hz. Working temperature up to 20C. New 2021. Shipping dimensions: L 205 cm x W 240 cm x H 220 cm x weight approx 1000 kg. Includes technical documentation.

with reinforced impeller 2800 min-1 4.0 kW B3 400/690 V IE 3 Max: 3200 min-1 T-max. 70°C incl. spare impeller Year of Make: 2019 Operating and assembly instructions available Weight approx. 76 kg

Blower G3G125 – EBM – Original – HDD – Spare Part – New Part Number: HDD – L2.179.1501 for Heidelberg printing presses This part is also suitable for the following types of machines: CD 102 / CX 102, CS 92, Primefire 106, SM 102 / SX 102, SM 52 / SX 52 / PM 52 XL 105 / XL 106 L 145 / XL 162 – Installation locations – Positions: Appendix – Display – Twist - Price on request

Year 1990 retrofitted to 2006 Type: S80 Power: 100 kw Clamping force: 80 Tons Passage between columns: 1400 x 800 mm Tray dimensions: 1800 x 1200 mm Minimum mould thickness max: 800 – 1200 mm Maximum mould width: 1200 mm Minimum mould height max: 500 – 1100 mm Total opening of trays: 2000 mm Minimum die diameter: 150-350 mm Hydraulic servo control: 6 spool valves Pneumatic servo control: 17 distributors Screw diameter: 100 mm 23LD Material throughput: 360 kg/hour Parison Regulation: MOOG 400 points Blowing rods: low position Accumulation weight: 8KG/HDPE

Year 1999 Tonnage: 180 T Tray dimensions: 1020 x 1600 mm Max mould height: 2000 mm Max mould width: 1200 mm Min mould thickness: 840 mm Max mold opening stroke: 895 mm Screw diameter: 120 mm L/D ratio: 28 Maximum extrudable weight in PE: 19000 Gr Maximum injectable volume: 25 liters Number of parison regulation points: 100 Die Min/max diameter: 190/450

A refurbished Aerzen screw compressor type: VM 410 - 2 is offered. All bearings and sealing elements have been renewed. This is the compressor stage.

Type: ELMO-G 2BH1 490-1AH13 2-flute pmax.: 180 mbar Motor: Siemens Power: 0.43 kW Voltage: 230/ 400 V frequency 50/ 60 Hz Degree of protection: IP54 New !

Side channel blower EG&G ROTRON DR068DJ9Y Flow rate: 21.6 m3/h 75 Watt 110 / 220 V (luminous flux) Dimensions: 220 x 190 x 180 mm

Manufacturer: VEM Type: LRH 90/1 Volume flow: 0.03 - 0.11 m3/s Total pressure increase: 5120 - 2060 Pa Power: 1.1 kW Speed: 2800 rpm Voltage: 220-380 V Dimensions: approx. 800 x 800 x 450 mm used, tested !

Centrifugal fan; Centrifugal blower Overall dimensions: 120x90x106 used, tested !

Suitable containers: E1, E2 and E3, capacity: 125-250crates/h. The system is suitable for the food industry. The system was used very little. The function was checked repeatedly and most recently tested again for full functionality. Before sale, the system will be thoroughly cleaned again. An on-site inspection is possible.

for the production of 27,000 bottles per hour. With shape

for production up to 28,000 bottles per hour. Good condition. Can be supplied with mould

We offer you a rotary lobe blower incl. electric motor from the company Borsig ZM GmbH. - Type: EG 3.2.1.B - Year of construction: 2010 - Power: 35.8 kW - Pressure: 1.0 bar - Weight: 160 kg

We offer you a rotary lobe blower from RKR Verdichtungstechnik. - Type: K80RSH - Year of construction: 1994 - Power: 41.5 kW - Pressure: 1.0-1.6 bar

Brand manufacturer: SIDEL Type : SBO 6/10 Serie 1 Machine currently in overhauling process Capacity: 7.200 BPH Number of moulds: 6 Equipped : quick change for shell moulds Oven type : linear with 10 heating modules Neck personalization: PCO 28 in 1810 can be modified to yours Machine equipped with: - Sidel preforms hopper & feeder - Sidel electrical cabinet - optionally we can supply new molds as per your drawing The machine will be supplied after overhauling with guarantee.

Viewing by appointment only Auction-ID: A1-40314-59

Power: 9 kW Volume: 6.43 m3 Pressure: 0.6 bar Price for a complete blower

A very clean and working vacuum compressor. 2m3 per hour, 0,85 bar. One faze 220 V. Can ship worldwide.

Inv. Num. : 6499 Type: TVA-30L Producer: TONVA Created: 2019 Parameters: Switch-on hours: 8000 h Clamping force: 250 kN Injection Molding Stroke: 550 mm Height of the clamping plate: 900 mm Clamping plate width: 950 mm Screw diameter: 80 mm Material: PE Container capacity: 30 l Capacity: 90-100 kg Number of heating zones: 4 pieces Machine length: 4800 mm Machine width: 2200 mm Machine height: 3300 mm Spraying weight: 10000 kg Equipment: MAGUIRE PRS-20 Mill

Key data: 90 mm, 30

Mono extruder type W & H 90 30 D, Film thickness 20 -200my, Nozzle diameter = 350 mm, Working width max. = 1500 mm, Winder tandem winder max diameter = 1000 mm, Max. winding width 1650mm Other: IBC  Thickness Control Film Dosing System = Gravimetric 

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor WEBERVibratory Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceType: ZEM 360Masch.- No.: 1113557 Year of Construction: 2004Pot Diameter Top: 360 mmPot Diameter Bottom: 250 mmPot Inner Height: approx. 110 mmSorting Lane Width: approx. 20 mmFilling Weight: approx. 12 kgFilling Quantity: approx. 3 LitresControl Voltage: 24 Volts DC (external power supply is required)Mains connection: 230 Volts, 50 Hz. Operating pressure: 6 bar control unit

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Vibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03613 Year of Construction: approx. 2000Pot Diameter Bottom: 250 mmPot Diameter Top: 380 mmPot Inner Height: approx. 70 mmSorting Lane Width: 30 mmTotal Height (Drive + Pot with Sorting Path): 390 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz control unit

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTtype: SRC-N 250-2LSer.- No: 03609 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Track): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNAVibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHType SRC-B200-2RBeauguration: approx. 2000Pot diameter top: 300 mmPot diameter bottom: 180 mmPot inner height: approx. 45 mmSorting lane width: approx. 5 mmTotal height (drive + pot with sorting track): 260 mmPower supply: 230 volts, 50 Hz.- RNA control device, type ESG 90 for Adjustable

cutting diameter: 280 mm capacity 90 degrees: flat: 380 x 260 mm capacity 90 degrees: square: 260 x 260 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3440 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.