blow moulding for used for sale

Used machine - completely overhauled - ready to use, no costs to be expected! Martin - T90 Year: 2004 Features: Length of entrance table: 2m Folding exit table: 0.80m Working width: 260 x 160mm Shaft speeds: 6000 RPM Tree Shoes Tersa 56 Amps 6 Bar Machine dimensions: Weight: 2.5 tons Length: 4.20m Depth: 1.40m Height: 1.60m Auction-ID: A1-45486-3

A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect.

KraussMaffei 50-160 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-160 C1 Year of manufacture: 1996 Serial number: 44461 Screw diameter: ~25 mm (some units have 30 mm variants) Injection volume: 101 cm³ Injection pressure: 1488 bar Closing force: 500 kN Mould opening stroke: 350 mm: 200 mm – 550 mm Electric connection: 400 V Machine weight: 2300 kg Total dimensions (L x W x H): 3191 x 1500 x 1887 mm Clamping plate size: 540 x 540 mm Tie-bar spacing (H x V): approx. 321 x 321 mm Mould height (min/max): approx. 200/550 mm Shot volume: approx. 52 cm³ (standard) Shot weight: approx. 47 g (PS equivalent) Injection weight: 92 g Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-3

KraussMaffei 50-190 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-190 C1 Year of manufacture: 1994 Serial number: 44236 Screw diameter: 30 mm Closing force: 500 kN Mould opening stroke: 350 mm Ejector stroke: 100 mm Injection pressure bar: 2222 Ejector force: 22 kN Electric connection: 400 V Approx. machine weight: 2300 kg Approx total dimensions (L x W x H): 3191 x 1500 x 1887 mm Tie bar spacing (H x V): approx. 321 x 321 mm Mould height range (min-max): ~200 mm - 550 mm Max. shot weight: ~66 g PS (polystyrene equivalent) Platen size: ~540 mm × 540 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-8

Clamping force: 1000 kN. Distance between tie bars: 470 x 470 mm. Platen size: 637 x 637 mm. Max. mould height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Shot volume: 675 cm³. Operating voltage: 400 V – 3 Ph – 50 Hz. Heating capacity: 14.9 kW. Pump motor: 1 x 22.00 kW. Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h. 2140 mm. Machine weight: 5400 kg. Serial number: 187133 – Machine 9

CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location :, Use: Cheese Cooking, Stretching and Moulding

- Rotary crown wrapper. - Crown diameter 250 mm. - Variable crown speed. - Variable feed speed. - Maximum dimensions of the workpiece approx. 170 x 70 mm. - Upper pneumatic grippers to stabilize the piece. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-728

- Total installed power 2.50 KW. - Adjustable feed speed. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-711

- Total installed power 2.30 KW. - Variable feed speed. - Variable crown speed. - Maximum dimensions of the piece 120 x 120 mm / 160 x 80 mm. - Minimum dimensions of the piece 20 x 20 mm. - Upper pneumatic grippers to stabilize the piece. - A TOLINTEMA MM 210 roller transfer is included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-703

This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details.

This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details.

This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details.

This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details.

This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details.

Light Freight Auction-ID: A3-43368-2146

Weld edge former, edge former, edge beveling machine TRUMPFFasing of steel plates for weld seam preparationType TKF 103Sheet thickness: 4 - 25 mmBevel length max: 10mmBevel angle: 30Power: 2000 wattsMains connection: 220 volts, 50 Hz- Equipped with guide bracket for 30 bevel angles - Regrindable butt steel for high tool utilization- Equipped for 20 mm sheet metalFor beveling straight and curved edges with a radius of at least 40 mm.For beveling edges on flat and curved workpieces as well as

Kistler 9041A Piezoelectric Force Sensor, Fz 90 kN Force Load Ring Item Condition: Used R12A5K2-5-PD (BOR) You can find more sensors - new and used - in our shop! International shipping costs on request!

• Ford Transit E-Transit electric panel van • Year of manufacture 2022 / Registration date: 29.12.2022 • 100% electric – no diesel, no petrol • Power 135 kW (184 hp) • Automatic transmission • Rear-wheel drive • Mileage approx. 60,800 km • Vehicle class N2 (3,900 kg gross vehicle weight) • Colour: Yellow (typical commercial vehicle) • 3 seats • 5 doors (incl. rear doors) • Large cargo space volume – ideal for commercial / transport / trade • Modern infotainment system with large display • Navigation system available • Electric windows • Central locking • Ready to drive Condition / Defects • Rear bumper (slight scratches) • Rear door handle is missing (rear!) • Interior with signs of wear • Seat cushion damaged (crack / wear) Contact: Julia Lorz– Surplex E-mail: j.lorz@tbauctions.com Phone: +49  ...

For lithium batteries from 82-410Ah REMA Battery Connector 400V plug Auction-ID: A1-45450-3587

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3683

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/ES_siuCTPRE Former Linde full-service machine next service due in 498 hours next UVV not due until 02/2027 - Full cabin with heater and windshield wipers - 3rd + 4th valve; Fork adjuster with sideshift Auction-ID: A1-45450-203

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/F_cbkyU1IrY - Former Linde full-service device - Next service due in 878 operating hours - UVV valid until /2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Full cabin with heater and windshield wipers - StVZO lighting with turn signals for road approval - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45450-216

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/K35-GDAbbRY - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 10/2019 80V 4PzS 500Ah, very good performance measured with 83.0V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Semi-cab with windshield wipers - Side fall-out protection (can be easily dismantled) - LED front work light - LED work light at the rear - Comfort seat Auction-ID: A1-45450-150

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/JivPa0CGnEU - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 02/2021 48V 5PzS 775Ah, very good performance measured with 50.3V - Triplex mast with full free lift - 3rd valve, sideshift - Side fall-out protection (can be easily dismantled) - LED front work light - Warning light orange - Safety light at the rear - Comfort seat Auction-ID: A1-45450-211

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/XHpxPIIbrUk - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 12/08/2020, 48V 625Ah, very good performance measured at 50.3V - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - white non-marking tires - LED work light at the rear - Safety light at the rear - Comfort seat Auction-ID: A1-45450-118

Charger 48V 130Ah with REMA battery plug and 16A wall plug Loading onto trucks no problem Auction-ID: A1-45450-3678

Charger 80V Ah with REMA battery plug and 16A wall plug Loading onto trucks no problem Auction-ID: A1-45450-3538

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/husV0yeZqlM - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 48/2022 80V 775Ah, very good performance measured at 84.5V - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - Semi-cab with windshield wipers - Roof pane - Side fall-out protection (can be easily dismantled) - LED front work light - LED work light at the rear - Safety light at the rear - Safety light at the front - Comfort seat Auction-ID: A1-45450-193

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3629

For Linde Lithium Batteries REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3420

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/xECTcAfZFIU - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 02/01/2020 48V 5PzS 775Ah, very good performance measured at 50.91V - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Full cabin with heater and windshield wipers - White non-marking tires - Comfort seat Auction-ID: A1-45450-253

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3469

Tank comes from Linde H30T model 392, suitable for every model 391, 392 and 393 from Linde. Loading onto trucks no problem Auction-ID: A1-45450-1021

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3684

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3571

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3652

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3638

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3655

Charger 24V Ah with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45450-3551

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/w9UGyjMu78U - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 16/2018 80V 5PZS 775Ah, very good performance measured with 84.5V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Full cabin with heater and windshield wipers - White non-marking tires - LED front work light - LED work light at the rear - Warning light orange - Comfort seat Auction-ID: A1-45450-93

Charger 24V 100A with REMA battery plug and 16A wall plug Loading onto trucks no problem Auction-ID: A1-45450-3680

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3650

Battery from former Linde Service Very good performance measured at 25.1V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1145

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/qv_q8483Fcg - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 07/01/2020 48V 5PzS 625Ah, very good performance measured with 50.6V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - Load protection grille (can be easily dismantled) - LED front work light - LED work light at the rear - Comfort seat with lumbar support Auction-ID: A1-45450-217

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3630

REMA 160A Battery Plug 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3382

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/1NyDZfh-e_w - Former Jungheinrich full-service machine - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 14/2019, 48V 4PZS 500Ah, very good performance measured with 50.1V - Triplex mast with full free lift - 3rd valve, sideshift - LED front work light - StVZO lighting with turn signals for road approval - Comfort seat Auction-ID: A1-45450-99

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video:https: //youtu.be/tlFYOBXKgKc - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 03/2020 48V 5PzS 625Ah, very good performance measured with 50.59 V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - Load protection grille (can be easily dismantled) - Roof pane - LED front work light - Blue safety light at the rear - Comfort seat Auction-ID: A1-45450-220

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk A mast that is too high can be dismantled and loaded for transport on request. Youtube function and status video: https://youtu.be/Wvzf89TCjBM - Former Linde full-service device - Next service due in 401 operating hours - UVV valid until 02/2027 - 3rd valve, sideshift - Semi-cab with windshield wipers - LED front work light - Blue Safety at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45450-129