129,383 used machines on RESALE, but how to find them? Machine Search
General SKUR0279 MakeKonrad Reitz Ventilatoren GmbH & Co. KG LocationBarneveld CEcheck TypeKXE 200-002530-00 Pressure Pressure buildup0.2 Bar Main Features Capacity25 m3/Min Motor30 KW Pressure0.2 Bar Specified Features - Blower Blowercheck Capacity1500 M3/h Motor30 kW 400/690 Volt With sound absorbercheck Inletdia. 180mm Outletdia. 90mm Information No.290567 Year of construction2012 Floorspace2,3x1,6 M Total height4,5 M Weight1250 KgBlowersReitzBlowers > BlowersBrand > Reitz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU221Y089 MakeAtlas Copco SerialITJ475307 Magento base g_extra_specificationsair compressor with dryer 10 bar, pressure , refrigeratnt R513A, CE, Air compressor 3 kW, dryer 1 kW, with compressed air tank 500 l, 11 bar, 1006 operating hours Pressure Pressure buildup10 Bar Main Features Capacity0.98 m3/Min Motor7.5 KW Pressure10 Bar Specified Features - Blower Capacity0,98 m³/min Information TypeG7 FF Year of construction2021 LocationBarneveld Weight250 kg CEcheck Extra SpecificationsOil-injected rotary screw air compressor with integrated refrigerant dryer: :Refrigerant type: R513A: :Max inlet temperature: 46 °C, :Max ambient temperature: 46 °C, :FAD capacity: 16.4 l/s = 59.0 m³/h = 34.7 cfm, :Duty: Continuous operation / 24-7 useBlowersAtlas CopcoBlowers > BlowersBrand > Atlas Copco What you can expect from Foeth: -- Machine is in working condition ...
Pressure blower from the brand THE NEW YORK BLOWER model ARR-8. Year 2016. Flow rate: 56 m³/h Static pressure: 2.4 kPa Density: 1.14 kg/m³ Temperature: 30°C Absorbed power: 0.26 kW Technical characteristics Model ARR-8 Year of manufacture 2016 ENGINE 0.26kW Documentation No documentation Maximum Flow FLOW 56 L/h Status Unused Manufactured by New York Blower Company
Pressure blower from the brand THE NEW YORK BLOWER model ARR-8. Year 2016. Flow rate: 56 m³/h Static pressure: 2.4 kPa Density: 1.14 kg/m³ Temperature: 30°C Absorbed power: 0.26 kW Technical characteristics Model ARR-8 Year of manufacture 2016 ENGINE 0.26 kW Documentation No documentation Maximum Flow FLOW 56 L/h Status Unused Manufactured by New York Blower Company
Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Stralfors, side channel blower with control box and filter -Type: 739641 704793-04 -Serial No: 04-BLOW-16 -Drive: Emerson Electric 250W -Speed: 2850 rpm -Individual components: see photos -Dimensions: 460/370/H310mm -Weight: 20kg
General SKU256X232 MakeAerzen LocationBarneveld CEcheck TypeGM35S Pressure Pressure buildup1.73 Bar Main Features Capacity25.39 m3/Min Motor55 KW Pressure1.73 Bar Specified Features - Blower Blowercheck Capacity25,39 m³/min Motor55 kW, 400/690 volt, 2975 rpm, (Ex) With air filtercheck With sound absorbercheck Inletcheck Outletcheck MaterialMild steel Information No.4043229 Year of construction2017 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace1,75x2,20 m Total height2,12 m Weight2525 kg ATEX compatiblecheck Extra SpecificationsMax suction pressure 1,030 bar. max discharge pressure 1,730 bar. buffer vessel, volume 132 l. this machine comes with additional parts and motor BlowersNew arrivalsAerzenBlowers > BlowersNew arrivalsBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared t ...
small die-head with 60, 80 or 100 mm die-insert, with cooling ring
Baking oven with 2 floors, hood and stand R Dimensions: 92x110x215cm Electric power: 9.2kW
Blower oven Dimensions: 92x110x215cm Electric power: 9.2 kW 400V 50Hz Capacity: 4 trays x 60x40cm
Blower oven Dimensions: 92x110x215cm Electric power: 9.2 kW 400V 50Hz Capacity: 4 trays x 60x40cm
Siemens GL5114 0gy40-3hu3-z + Blower 2CW6 145 - 8 + Tacho
Ghioldi single layer blown film extruder, suitable for LDPE and MDPE, extruder with 55 mm Ø screw diam., lever screen-changer, Rotating head, 150 mm Ø die, calibrating cage, pull off unit, gusseting units, Cason corona treatment, 1.100 mm single winding station, Tower included, complete with manuals, electrical drawings, CE compliance
General SKU269X297 LocationBarneveld MakeKillion TypeKL-075 No.19707 Year of construction1995 Main Features Motor1.1 KW Inlet diameter35 mm L/D26 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter19,1 L/D26 Number of heating zones:3 Electric heating18,4 KVA, 380 volt, DC-motor1,1 kW, 380 volt Screw speed12-120 rpm InletDia. 35 mm Feeding with hoppercheck Number of temperature controllers:3 MaterialStainless steel Information Mounted on frameOn wheels With switchgearcheck Total height1,50 m Weight300 kg CEcheck Floorspace1,10x0,90 m Extra Specificationsextruder comes with: Thermo Prism TSE systems nr: 5265. year: 2002 Single screw extrudersKillionExtruders > Single screw extrudersBrand > Killion What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...
General SKU269X293 MakeCollin TypeTeach-line E20T and BL50T No.9120 3914 Year of construction2014 LocationBarneveld Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder MaterialStainless steel Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C Information With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg CEcheck Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min, : winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm : Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is ...
Year of manufacture 2004 for 5 - 10 litre containers Clamping force: 100 kN Wall thickness control: 64 points Max. product diameter: 115 mm Cavities: 1 x 3 Center distance: 125 mm Machine is in good condition, and available immediately
Manufacturer: Macchi Year of Manufacture: 2012 Machine Type : 3-layer co-extrusion blown film line Condition: Good working condition, currently in production Materials LLDPE, LDPE, LLD, HDPE Extruders - Configuration: 65 mm + 80 mm + 65 mm (3 extruders) - Heaters: Infrared - Filtration: 3 plate filters Die Head - Type: 3-layer blown film die head - Reference: TE5303-IBC-350/500 - Die diameters available: 350 mm and 400 mm - Die gap: 1.8 mm - Internal Bubble Cooling (IBC): yes Output - Maximum output: up to 800 kg/hour depending on material formulation Air Ring - Type: Dual flow air ring, carbon fibre construction Take-Off Unit - Take-off width: 2400 mm - Nip type: Oscillating - Side gusseting: motorised Rewinder - Type: Double winder, fully automatic back-to-back rewinder - Roll change: fully automatic - Maximum reel diameter: 800 mm - Winding width: 2350 mm Accessories ...
volume capacity: 1020 m³/h engine output: 7,5 kW sound - pressure - turn off level ca. max.: 75 dB suction power: 1013 bar motor speed: 2950 min-1 range L-W-H: 1,25 x 1,35 x 1,5 m weight: 577 kg Electric 400 Volt: UNUSED Delta Blower Generation 5 rotary lobe blower, type GM 15 L, design B3, size 132 S. Efficiency class IE3. Siemens motor with 3 built-in temperature sensors, soundproof enclosure. Suction pressure 1,013 bar. Volume flow in positive pressure operation 1,020 m³/h Volume flow in negative pressure operation 1,080 m³/h The device was unpacked and run for a maximum of one hour before it was discovered that it was too small. A new, larger one was then ordered. Sound enclosure made of galvanized sheet steel with oil drip tray. Painted in RAL 5001 color / front elements in RAL 7047. Segmented design with interior lining and forced ventilation. Fan impeller driven by blower shaf ...
General SKU287P484 Makeunknown, manufacturing tag is missing Year of constructionunknown Mounted on framecheck Main Features Motor4 KW Specified Features - Blower Blowercheck Capacity(unknown) Motor4,0 KW, 400 Volt (CE) With air filtercheck Inletdia.60mm Outletdia.55mm MaterialMild steel Information LocationBarneveld With switchcheck Floorspace0,8x0,9 M Total height1,4 M Weight250 KGBlowers-Blowers > BlowersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU001M033 MakeDietrich Reimelt TypeGMA 10,0 No.316484 Year of construction1989 LocationBarneveld Pressure Pressure buildup0.3 Bar Main Features Capacity1 m3/Min Motor3 KW Pressure0.3 Bar Specified Features - Blower Blowercheck Capacity60 m³/h Motor3 kW(380V, 1400 rpm) With air filtercheck With sound absorbercheck Inletø 150 mm Outletø 200 mm MaterialMild steel Information Mounted in sound absorbing boxcheck Floorspace0,8 x1,2 m Total height0,8 m Weight500 kgSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsBlowersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicAgrochemicalsBiotechnologyRubberOther chemicalStarchFine chemicalsTea, h ...
bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm
It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 1 Number of rollers: 2 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 1100 mm Height: 1200 mm Height of dough entry: 1180 mm H ...
It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 2 Number of rollers: 4 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 630 + 450 mm Height: 1200 mm Height of dough entry: 1180 m ...
Moulding machine Ital Form Made of duralumin and steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg
Moulding machine Ital Form Completely made of stainless steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg
Moulding machine Ital Form 4 cylinders Rollers 500 mm long Dimensions: 850x1200x1150mm Electric power: 0.75kW Weight: 170 kg
Forklift forks, forks, forklift tines with anti-slip coatingLoad capacity: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carriage height: 405 mm - suitable for tine holder: FEM 2 Form B rubber coating as anti-slip coating and for protecting transport goods? Rocker arm lockWeight: 145 kgas good as new, unusedFor a 2.5 ton. Forklift.; used
mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2
bushing cut-off diameter range 5 mm cutting length 50 mm shaft length under head 40 mm output - pieces/min 450
bushing cut-off , PKO , Forma packs diameter range 11,8 mm number of dies 5 number of stations 6 cutting length 3 - 45 mm shaft length under head 50 mm output - pieces/min 85 - 255 press power 50 to
MF-25 Corner Forming Machine
• Stainless steel pharmaceutical version • Payload 350 kg • Lifting height top of fork approx. 140 cm without telescope • Fork width 170 cm, fork length 115 cm • Drive • New accumulator • New charger • Only 71.3 operating hours • El. connetcion 230V/50Hz
Komatsu Forwarder 845 motor A G C O power 49 AWF - only 2000 hours engine contaminated ( presumably a wrong liquid was poured in when the machine was out in the forest ) Price from Leende - Ned. € 3.000,=
The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm
Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...
The machine could also be used as a transport belt conveyor. Transport input length 2.000 mm Transport output length 1.000 mm Transport width 600 mm Working height 500 - 700 mm Transport speed 7 - 35 m/min.
New stack turnover machine Brand: Formetal Type: RT.180 PL Technical data: Usable width of roller conveyor: 1.000/1.200 mm Length of roller conveyor: 3.300 mm Min. stack height: 1.150 mm, max. stack pelhöhe: 1.600 mm Min. stack width: 300 mm Max. stack length: 3.000 mm Max. stack weight: 2.800 kg In- and outfeed roller conveyor - Roller Ø 89 mm - Distance between roller 190 mm - Drive with fix rotation speed motor 10,5 m/min. - Installed electrical power: 5,0 kW - Pneumatical door opening system - Stack turner RT.180PL 1000 Max. stack width: 1.000 mm Working height (for roller conveyor width 1.000 mm): 250 mm - Stack turner RT.180PL 1200 Max. stack width: 1.200 mm Working height (for roller conveyor width 1.200 mm): 400 mm
🔧 Strong, flexible, and immediately available! Buy the Form-on clamp new - compatible with Doka Frami - and equip your site with reliable formwork accessories . The clamp locks precisely into the profile recesses of the Frami panels and can be fixed at any position †for a secure and fast connection. ⚡ The wedge is protected against falling out, ensuring maximum safety at work. 🌍 Delivered in used reusable containers ♻ †sustainable and well protected. Please note: Containers are not included in the unit price . 🔍 Checking quality made easy: either live at our Form-on warehouse or conveniently online via smartVISIT †the fast solution to see the quality without the need to travel. 👉 Looking for Frami accessories , new clamps , or want to buy Form-on clamps right away? Then act now †before your advantage ...
Form-on multi function clamp - compatible with Doka Framax/Ringer Master †strong, versatile, reliable 🚚 With the Form-on multi function Clamp , you can connect your frame panels in no time. It provides tension-resistant and stiffening connections †whether it’s element, adjustment, or extension connections. This allows you to work safely, stably, and flexibly on the construction site. â The galvanized surface reliably protects against corrosion, while the practical 40 cm length ensures a perfect fit for your formwork solutions. 🔧 And because we know you value efficiency, we deliver the multi function Clamp in a practical packaging unit: 🚚 100 pcs in 1 MWC With the Form-on multi function Clamp, you choose quality that lasts †and a tool that makes your job site smarter. 💪 Price: from € 3 ...
⚡ New in the Form-on range †get yours now! ⚡ Buy the Form-on adjustable clamp new - compatible with Doka Framax/Ringer Master - and equip your project with the perfect formwork accessory . The adjustable clamp ensures a tensile-strength connection , is galvanized, robust, and delivers reliable performance †even under the toughest conditions. 💪 🌍 Packed in used reusable containers ♻ †sustainable and safely transported. Please note: Containers are not included in the unit price . 🔍 Still unsure? Convince yourself: either directly at our Form-on warehouse or conveniently and digitally via smartVISIT †the fast solution to experience the quality live without having to come by. 👉 Whether you’re looking for Framax accessories , new adjustable clamps , or want to buy Form-on adjustable clamps r ...
Form-on Quick-acting Clamp RU †compatible with Doka Framax/Ringer Master - your strong partner on site 🔧 When it comes to connecting frame panels, you need a solution that is fast, safe, and hassle-free. That’s exactly what the Form-on Quick-acting Clamp RU delivers. Thanks to its smart design, it grips flexibly into the continuous recess of the frame profiles †at any position you need. This saves you valuable time and gives you maximum freedom during assembly. â The integrated wedge is secured against falling out. For you, this means less risk, more safety, and noticeably easier handling. That way, you can complete your formwork tasks efficiently, reliably, and without unnecessary interruptions. 🚀 And because you deserve not only quality but also great value, we deliver the Form-on Quick-acting Clamp RU in a practical packagin ...
🔥 Highlight offer at Form-on! 🔥 Buy the Form-on super plate 15.0 new †available now and ready for immediate delivery. These new super plates are an absolute must-have in formwork accessories : robust, galvanized, and perfect for use with tie rods . 💪 ✨ Special extra: Delivery comes in used reusable containers ♻ †sustainable and safely packed. Note: Containers are not included in the unit price . 🔍 Want to check the quality yourself? No problem: You can inspect the material anytime at our Form-on warehouse †or conveniently via smartVISIT , the digital and fast solution to get an impression of the quality without having to come by in person. 👉 Looking for anchor plates , new super plates , or want to buy Form-on super plates right away? Then don’t miss out on this offer †only while stocks las ...
The BIRO F2000N, F3000N, F4000N & HD3000EHN Food / Patty Forming Machines are designed for production of a wide variety of meat and food products, with maximum production output capability from approximately 2000 to 4000 formed products per hour. A large number of drum mold die shapes are available. They vary from the standard round shapes of different diameters to special shapes such as square, oval, rectangle, fish, cutlet, heart, chicken leg, chicken nuggets, rabbit, bone, tree, pork chop, etc.
Dear Sirs, We are pleased to offer the following Used Open Die Forging Press, manufactured by Kawasaki (Japan), a well-known and reputable Japanese OEM. EQUIPMENT OVERVIEW Equipment: Open Die Forging PressManufacturer: Kawasaki (Japan) Manufacturing Year: 2012 Condition: Used, in production until May 2025 Application: Forging of rings and heavy forged components The press owner supplied forged parts (mainly rings) for power plant applications to leading OEMs such as Mitsubishi, Toshiba, GE, Hitachi, Fuji, etc. TECHNICAL SPECIFICATIONS General Press Capacity: 2,000 ton System Pressure: 30.0 MPa Pulling Capacity: 1,000 kN (100 ton) at 19.5 MPa Number of Cylinders: 3 Main Cylinder Diameter: 796 mm Press Weight: Approx. 130 ton Stroke & Daylight Stroke: 1,500 mm Daylight: 2,300 mm Table Fixed Table Size: 1,650 mm (R.L) × 2,400 mm (F.B) ...
Formax ULTRA26 Former The ultimate burger machine Suitable for forming a broad range of meat, poultry and non-meat products. It is commonly used by high-volume processors to form popular products such as burger patties, pork sausage, chicken fillets and chicken nuggets. Delivers precise weight and shape control while forming products with a natural texture and excellent appearance.
Met RoboHelix-machines kunnen spiraalvormige schoepen worden gevormd uit standaard ronde of van een patroon voorziene werkstukken. RoboHelix-machines vereisen uiterst nauwkeurige synchrone bewegingsbesturing. Door de gebruiker gegenereerde gegevens worden vanuit cloudgebaseerde software, HelixNinja, naar het apparaat gedownload. Deze informatie wordt vervolgens verder verwerkt om coördinaten in het 3D-vlak te genereren, waarmee het proces van het creëren van een vliegtuig vanuit een blanco basis wordt nagebootst. De motoren volgen synchroon deze coördinaten om het vliegtuig te produceren. Met de elektronische nokkenplaatfunctie in TwinCAT NC Camming (TF5050) is relatieve synchrone beweging overal en altijd mogelijk. Afmetingen en toleranties zijn geen probleem meer zodra de motoren en aandrijvingen zijn gekalibreerd. De tweede generatie RX250 uit de machinelijn van RoboHelix heeft een ...
Deze spiraalvormige bladenvormmachine is een koudwalsmachine voor het continu walsen van spiraalvormige bladen uit stripstaal. Door de parameters aan te passen (walsoffset, invoerhoogte, walsdruk, geleidingswiel, enz.) kunnen bladen van diverse specificaties worden gewalst.
FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available
FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm
FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm
maximum number of results exceeded
please refine your search
