136,829 used machines on RESALE, but how to find them? Machine Search
Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor -Type: Elmo-G 2BH6 000-0AC12 -Drive: 2.2 kW -Speed: 2860 rpm -Overall dimensions: 400/380/H380 mm -Weight: 31.6 kg
Key data: 2500 mm, 32 mm
Manufacturer / make: WMW Schwermaschinenbau Wildau Type/ type: UBR 32 x 2500-7/16 Lagernummer / stock number: 1019 Baujahr / new in: 1969 max. sheet width: 2500 mm Bale length / convexity length of rollers: 2700 mm Max. sheet thickness ( St 50): 32 mm Max. sheet thickness ( St 34): 39 mm min. sheet thickness ( St 50): 8 mm Number of straightening rollers:7 rollen / rollers Number driven straightening rollers: 5 rollers Straightening roller diameter of straightening rollers: 290 mm Output straightening rollers / diameter of input / output straightening rollers: 345 mm Number of support rollers: 13 Stützrollendurchmesser / diameter of support rollers: 288 mm Oberbolenhub/ stroke of upper beam: 120 mm Straightening speed / speed of straightening: 16 m / min Hauptantrieb / rated power of main drive: 90 kW Total load: 138 kW Gewicht de ...
Blown film line especially for PP processing length: 6,300 mm width: 2,500 mm height: 4,200 mm Weight: 3.700 kg blowing capacity: 65 kg/hod. Film Thicknes: 0.015 – 0.1mm film width: 250 – 650mm Die- diameter 65 mm Winding speed: 5 – 60m/min. Power consumption: 72 kW
Robuschi ES55/2P-RVP80-CAR Blower Serial: 4001 Air blower, in box, 30Kw, 3Ph
Fischer 2051 (4051) Leaf blower for three-point attachment Cat. I and II, front or rear attachment. PTO drive 540 1/min. Turbine flow rate up to 300 m³ / min. . More green maintenance technology from A to Z and much more in stock - see sample photos! More objects also under > jodau > Used machines ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...
Stock# UG6379 Little used centrifugal blower fan model GF-30. Working output in range from 27000 - 32000 m3/h, at pressure 6-5,8 kPa. Driven by el motor 75 kW, 1450 rpm, 380/660 V, 50 hz. Working temperature up to 20C. New 2021. Shipping dimensions: L 205 cm x W 240 cm x H 220 cm x weight approx 1000 kg. Includes technical documentation.
with reinforced impeller 2800 min-1 4.0 kW B3 400/690 V IE 3 Max: 3200 min-1 T-max. 70°C incl. spare impeller Year of Make: 2019 Operating and assembly instructions available Weight approx. 76 kg
A refurbished Aerzen screw compressor type: VM 410 - 2 is offered. All bearings and sealing elements have been renewed. This is the compressor stage.
Year 1990 retrofitted to 2006 Type: S80 Power: 100 kw Clamping force: 80 Tons Passage between columns: 1400 x 800 mm Tray dimensions: 1800 x 1200 mm Minimum mould thickness max: 800 – 1200 mm Maximum mould width: 1200 mm Minimum mould height max: 500 – 1100 mm Total opening of trays: 2000 mm Minimum die diameter: 150-350 mm Hydraulic servo control: 6 spool valves Pneumatic servo control: 17 distributors Screw diameter: 100 mm 23LD Material throughput: 360 kg/hour Parison Regulation: MOOG 400 points Blowing rods: low position Accumulation weight: 8KG/HDPE
Year 1999 Tonnage: 180 T Tray dimensions: 1020 x 1600 mm Max mould height: 2000 mm Max mould width: 1200 mm Min mould thickness: 840 mm Max mold opening stroke: 895 mm Screw diameter: 120 mm L/D ratio: 28 Maximum extrudable weight in PE: 19000 Gr Maximum injectable volume: 25 liters Number of parison regulation points: 100 Die Min/max diameter: 190/450
Type: ELMO-G 2BH1 490-1AH13 2-flute pmax.: 180 mbar Motor: Siemens Power: 0.43 kW Voltage: 230/ 400 V frequency 50/ 60 Hz Degree of protection: IP54 New !
Side channel blower EG&G ROTRON DR068DJ9Y Flow rate: 21.6 m3/h 75 Watt 110 / 220 V (luminous flux) Dimensions: 220 x 190 x 180 mm
Centrifugal fan; Centrifugal blower Overall dimensions: 120x90x106 used, tested !
for the production of 27,000 bottles per hour. With shape
Manufacturer: VEM Type: LRH 90/1 Volume flow: 0.03 - 0.11 m3/s Total pressure increase: 5120 - 2060 Pa Power: 1.1 kW Speed: 2800 rpm Voltage: 220-380 V Dimensions: approx. 800 x 800 x 450 mm used, tested !
for production up to 28,000 bottles per hour. Good condition. Can be supplied with mould
We offer you a rotary lobe blower incl. electric motor from the company Borsig ZM GmbH. - Type: EG 3.2.1.B - Year of construction: 2010 - Power: 35.8 kW - Pressure: 1.0 bar - Weight: 160 kg
We offer you a rotary lobe blower from RKR Verdichtungstechnik. - Type: K80RSH - Year of construction: 1994 - Power: 41.5 kW - Pressure: 1.0-1.6 bar
Power: 9 kW Volume: 6.43 m3 Pressure: 0.6 bar Price for a complete blower
Brand manufacturer: SIDEL Type : SBO 6/10 Serie 1 Machine currently in overhauling process Capacity: 7.200 BPH Number of moulds: 6 Equipped : quick change for shell moulds Oven type : linear with 10 heating modules Neck personalization: PCO 28 in 1810 can be modified to yours Machine equipped with: - Sidel preforms hopper & feeder - Sidel electrical cabinet - optionally we can supply new molds as per your drawing The machine will be supplied after overhauling with guarantee.
A very clean and working vacuum compressor. 2m3 per hour, 0,85 bar. One faze 220 V. Can ship worldwide.
Inv. Num. : 6499 Type: TVA-30L Producer: TONVA Created: 2019 Parameters: Switch-on hours: 8000 h Clamping force: 250 kN Injection Molding Stroke: 550 mm Height of the clamping plate: 900 mm Clamping plate width: 950 mm Screw diameter: 80 mm Material: PE Container capacity: 30 l Capacity: 90-100 kg Number of heating zones: 4 pieces Machine length: 4800 mm Machine width: 2200 mm Machine height: 3300 mm Spraying weight: 10000 kg Equipment: MAGUIRE PRS-20 Mill
Key data: 90 mm, 30
Mono extruder type W & H 90 30 D, Film thickness 20 -200my, Nozzle diameter = 350 mm, Working width max. = 1500 mm, Winder tandem winder max diameter = 1000 mm, Max. winding width 1650mm Other: IBC Thickness Control Film Dosing System = Gravimetric
cutting diameter: 280 mm capacity 90 degrees: flat: 380 x 260 mm capacity 90 degrees: square: 260 x 260 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3440 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor WEBERVibratory Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceType: ZEM 360Masch.- No.: 1113557 Year of Construction: 2004Pot Diameter Top: 360 mmPot Diameter Bottom: 250 mmPot Inner Height: approx. 110 mmSorting Lane Width: approx. 20 mmFilling Weight: approx. 12 kgFilling Quantity: approx. 3 LitresControl Voltage: 24 Volts DC (external power supply is required)Mains connection: 230 Volts, 50 Hz. Operating pressure: 6 bar control unit
Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Vibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03613 Year of Construction: approx. 2000Pot Diameter Bottom: 250 mmPot Diameter Top: 380 mmPot Inner Height: approx. 70 mmSorting Lane Width: 30 mmTotal Height (Drive + Pot with Sorting Path): 390 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz control unit
Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTtype: SRC-N 250-2LSer.- No: 03609 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Track): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz
Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNAVibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHType SRC-B200-2RBeauguration: approx. 2000Pot diameter top: 300 mmPot diameter bottom: 180 mmPot inner height: approx. 45 mmSorting lane width: approx. 5 mmTotal height (drive + pot with sorting track): 260 mmPower supply: 230 volts, 50 Hz.- RNA control device, type ESG 90 for Adjustable
used
The rotary lobe blower has been completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.
Key data: 60 mm, 25
Blown Film Extrusion Line: Manufacturer: Reifenhäuser / Troisdorf Type: S 100.060 Connection: 220 / 380 Volt Total connected load: approx. 100 amps Film thickness range: 30 - 80 microns max. winding width: 1200 mm Material: LDPE Extruder: Type: S60 Power: 7 to 28 kw Screw diameter: 60mm Screw length: 25D Max. output capacity: 50 kg/h Drive: Elektra Faurndau GmbH Granulate feed via vacuum conveyor Die head: rotating Type: BSR 100 - 250 mm Die insert: 150 mm and 200 mm diameter Heating capacity: 11.2 kW Cooling ring: Cooling ring inserts: 150mm and 200mm diameter Air volume control, lip adjustment Flattening and pull off device: Adjustable side boards for foil flattening Side gusset insertion device Pull-off rollers Winder: 2 digits - tandem wrapper manual winding shaft insertion device Winding System: Tangential Winder pneumatic roller lifter Max ...
For sale is an Aerzen GM 4 S rotary lobe blower. Can be purchased as a complete unit or separately as shown in the pictures. Year of Make: 2004 Condition: Blower overhauled - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.
For sale is an Aerzen GMA 10.2 rotary lobe blower. Can also be used as a replacement for a GM 7 L. Year of Make: 2000 Condition: Refurbished - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.
MACHINE À INJECTION - SOUFFLAGE PROCREA TYPE Rev 300 Cette machine d’injection soufflage PROCREA REV 300 peut produire des récipients à corps creux complètement finis, sans déchets comme moulés en injection avec différentes matières plastiques, avec des cycles complètement automatique, capacité de 50 cc. à 15 litres et poids de 20 gr. à 700 gr. Cette machine est prédisposée pour fonctionner avec des moules de 1 à 8 empreintes et la production est très élevée grâce au système à revolver qui accomplit toutes les opérations d'injection, soufflage et éjection de la pièce finie dans un seul stade. La construction des moules pour la Rev 300 est très simple grâce au système automatique d'extraction appliqué au revolver.
For sale is an Aerzen GMA 11.3 rotary lobe blower. Can also be used as a replacement for a GM 10 S. Year of Make: 1990 Condition: Refurbished - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.
For sale is an Aerzen GMA 11.3 rotary lobe blower. Can also be used as a replacement for a GM 10 S. Year of Make: 1990 Condition: Refurbished - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.
maximum number of results exceeded
please refine your search
50 € 
