blow mould used for sale

SPECIFICATIONS: Swiveling spindle milling machine Table size mm: 1200 x 820 vertical spindle stroke length mm: 180 I Spindle diameter mm: 50 II Spindle diameter mm: 30 Powerlock Spindle speed: 10,000 rpm. Motor power KW: 7,5 Complete with: -Control panel - 4-roller feed with variable adjustment

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Brand: Paoloni Type: T140 Motor power: 5 KW Milling mandrel : 30 mm Height adjustment milling spindle: 140 mm Speeds: 3000-4500-6000-9000 Spindle height adjustment: Handwheel adjustment with analog display Feed: HolzHerr 3 roll Option: Aigner integral stop

SPECIFICATIONS: Table size: 2200x450 mm (extendable) Installed power: 5 Kw EQUIPMENT: Drive on 3 rollers Accessories

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools

Weibert WJ-F10 Table milling machine new • New version: WJ-F10-1150 • Milling machine: swivel 90°-45° • Milling machine rpm 1400/3500/6000 and 8000 min. • Sliding table 1150mm (optional 1600mm) • Motor power: 400V 3 KW (4.0 HP) • WJ-600100 • Options at extra cost: • Telescope 900mm • Eccentric clamp • Milling motor 4 KW (5.5HP), S1 100% • Milling motor 5.5 KW (7.5 HP)S1 • Milling spindle 30mm • Eccentric clamp • Integral safety rails 500mm • Clockwise and counterclockwise rotation • Table extension right/left

SPECIFICATIONS: Pre-spindle machine inlet: 2000 mm Working width: 210 mm Working height: max. 120 mm Cardan shaft drive Drive shaft power: 2.2 kW I. Spindle: Bottom (4 kW) II. Spindle: Right (3 kW) III. Spindle: Left (4 kW) IV. Spindle: Right (5.5 kW) V. Spindle: Above (5.5 kW) VI. Spindle: Above (5.5 kW) VII. Spindle: Bottom (4 kW) With tools

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

SPECIFICATIONS: Planer: 2500 mm Machinable width: max. 210 mm Working height: max. 150 mm Cardan shaft drive Drive shaft power: 5.5 kW Spindle configuration: I. Spindle: Bottom (4 kW) II. Spindle: Right (4 kW) III. Spindle: Left (5.5 kW) IV. Spindle: Right (4 kW) V. Spindle: Top (4 kW) VI. Spindle: Bottom (4 kW) VII. Spindle: Universal spindle (5.5 kW) With tools.

Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12

SPECIFICATIONS: Mechanical working height adjustment Installed capacity: KW 5.5 Complete with accessories (spindles/counter spindles)

Set-out sleeve for quick montage

Moulder Weinig PFA 14/7 Specifications: Working width (mm) 140 Waves: 7 1. Shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5. Shaft: up 6. Shaft: down 7th Wave: Uni Wave

Cast iron spindle moulder saws with: - side trolley for tenoning, on pole and with flag support, with tilting guide and useful stroke of about 1500mm - Saw unit for tenoning - Spindle moulder hood with AIGNER guides - with 3-wheel drive Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Spindle configuration: bottom 3kw right 3kw left 3kw top 4kw universal 3kw - working width mm 230 - planing height mm 120 - volt. 380/50 - s/n 25 906/00 - year 1998

Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer). (Subject to changes and error ...

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Bench router Brand: Bäuerle Model: SFM Year of construction: 1968 Spindle diameter: 30mm Clockwise/counterclockwise rotation Feeder Brand: Holzher Model: ET 117

Weibert F40 - Table milling machine Milling spindle 30mm 90° Speeds: 1400/ 3500/ 6000/ 8000 rpm Casting table length 1000 mm width 500 mm Motor 2.2kW 400V Integral Safety Rails 500mm Pressure Device MORI Table extension right and left Right-counterclockwise rotation of the milling spindle

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA machine for joining parts of chairs, living rooms, furniture, etc. the FTA machine is made up of 3 automatic operating units : 1st unit : circular saw for cutting workpieces to length 2nd unit : spindle moulder for milling with hydraulic sliding carriage 3rd unit : drilling unit with multiple center distance head . there are 9 work programs that can be selected and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 . hydraulic sliding carriage - Boring unit . engine power Hp 3 . max. depth drilling mm. ...

Technical details: - Milling spindle swivels and height adjustable! - Adjustment displays of the milling spindle analogue on the handwheel - Spindle can be swivelled from -10° to +45° - Diameter of milling spindle (assembled): 30 mm - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm (mechanical changeover) - Display of spindle speed via indicator lamps - Mechanical spindle lock - Spindle right-left rotation - Milling mandrel mount: MK55 - Machine table length: 1,140 mm (without extension) - Max. table width: 840 mm - Working depth (up to cutter shaft): 430 mm -Table height: approx. 830 mm - 2 x adjustable milling stops (height: 150 mm, length: 430 mm (plus wooden extension) - Max. diameter table opening: 230 mm (3 rings) - 2 x suction nozzles, diameter 120 mm per nozzle Engine data: - Two-stage speed - Manual star-delta circuit - Voltage: 380 V - Current ...

Motor 1.4 kW/380 V/50 Hz, spindle 30 mm, tool max. D=200 mm, height and angle adjustment, table 650x600 mm, sliding table 530x280 mm, speeds 3000/6200/9000 rpm (fold down belt), cut-off stop extendable up to 2800 mm, hold-down, table extension 100x200 mm, suction nozzle D=100 mm

Motor 5.0 kW/380 V/50 Hz/13 A, 2 speeds, clockwise/counterclockwise rotation, feed 3 rollers, switched socket for feed, stop can be rotated with fine adjustment, stop jaws 560x150 mm, work table 1010x900 mm, table extension right 500x440 mm, extension 2 m to 520 mm extendable, height and side adjustable slot table 810x400 mm, with hold-down and 90° adjustable stop, removable additional support 1070x170 mm with angle stop (Aigner), 4 speeds 3000/4500/6000/9000 rpm (2x belt fold, 2x electr. switchable), suction connection D=2x120 mm

Moulding machine Ital Form Made of duralumin and steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Used spindle moulder PAOLONI mod. T160L Long tops Removable front guide spindle moulder guide with total movement by means of a handwheel Folding spindle moulder guide Swivel support for advancement Hanging control panel Motorized spindle lifting interchangeable shaft Year of manufacture 2003 EC

Moulding machine Ital Form Completely made of stainless steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Moulding machine Ital Form 4 cylinders Rollers 500 mm long Dimensions: 850x1200x1150mm Electric power: 0.75kW Weight: 170 kg

TF170E Table milling machine with sliding table 1m with transverse stop

Carriage (LxW) 1000 x 240mm Working length of spindle 100mm Milling spindle diameter 30mm Spindle inclination +5 - -45° Spindle speed 1800 / 3000 / 6000 / 9000 Working height 900mm Suction nozzle diameter: 38/100 Dimensions (LxWxH) 1000 x 850 x 1200mm Motor 2.8KW 400V Weight 218kg

Connected load 380V 6.8kW 12A with sliding table 1100 mm Table size 1100 x 900 mm Height adjustment with hand crank Integral stop jaws Stops individually adjustable via Siko counter Aigner milling cutter protection device Suction 1x120 1x150 mm Speeds: 2900/4400/6000/8000/10000 rpm

RM GROUP spindle moulder model SM120: – shaft D=35mm, with manual lift – motor kw 4 / hp 5.5 , volt 380 – 4 shaft rotation speeds: 4200/6000/8000/9700 rpm Year 2007. Machine not compliant with CE regulations, for export

Block moulding machine with mixing plant for sale. The board paver of the manufacturer Zenith, type 860 AZ, built in 1988, has been in continuous operation at the same location. In addition to the stone paver, the entire production circuit and a production circuit and a complete mixing plant with 3 TEKA mixers (2x THZ1875 and 1xTHZ1125), year of construction 1985. The plant can be fully used after acquisition. The stone paver is still in operation until at least the end of September 2023 and can be inspected in production until then. Stone moulding machine: - Board paver from the manufacturer Zenith, type 860 AZ, year of manufacture 1988. - Production of core and facing - Control Simatic S 5 with visualisation from Zenith - Board size 1,400 x 950 mm - Maximum production height 14 cm - Pneumatic mould clamping Find more here - / Contact us at -

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

SPECIFICATIONS: Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW

TECHNICAL DATA: Work table mm: 900 x 900

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Tool clamping system: inkl 2 Vorschübe, Year :1981

SPECIFICATIONS: Length of pre-planer machine inlet: 2200 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Cardan shaft drive Speed: 8000 rpm Voltage: 380 V Spindle configuration: 1: Bottom (5.5 kW) 2: Right (5.5 kW) equipped with PowerLock HSK 3: Left (5.5 kW) equipped with PowerLock HSK and electronic control 4: Top (5.5 kW) with PowerLock HSK and electronic control 5: Bottom (5.5 kW) equipped with PowerLock HSK EQUIPMENT: Complete with milling

Manufacturer: Kölle Tischfräse, Type: F 50, Year: 1990, Control: oben, revolutions rpm: 3000/6000/9000, Length lifting spindle mm: 150, Diameter of the spindle mm: 30, Spindle travel range total mm: 120, Spindle swivel-mounted max Grad: no, Main engine kW: ca.4, Feeding speed: yes, Table extension - lenght: yes, Exhaust diameter mm: 150, Wight approx. kg: ca.900, FREE TEXT: Anschlag ausziehbar/Haffner Vorschub, Year :1990

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Feeding speed: 1800 kg, Year :1981

Table milling machine Schröder Table length 2480 mm Extendable table support Milling spindle in the machine diameter 30 mm incl. milling spindle diameter 40 mm with 4 rollers feed wood with mechanical spindle brake by foot lever Weight approx. 800 kg

Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.

Manufacturer: ARBURG Model: ALLROUNDER 680 Year of Manufacture: 2016 Type of Machine: Injection Moulding Machine Electrical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: 230 V ~ / 24 V = - Motor/Heating Rated Current: 76 A / 18 A - Total Rated Current: 94 A - Total Connected Load: 56 kW Machine has already been dismantled Operating hours: à approx. 29,000 hours Find more here - / Contact us at -

Manufacturer: ARBURG Model: ALLROUNDER 680 Year of Manufacture: 2016 Type of Machine: Injection Moulding Machine Electrical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: 230 V ~ / 24 V = - Motor/Heating Rated Current: 76 A / 18 A - Total Rated Current: 94 A - Total Connected Load: 56 kW Machine has already been dismantled Operating hours: à approx. 29,000 hours Find more here - / Contact us at -

There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible.

A Boy injection molding machine is available. Clamping force: 100kN, tie bar distance (diagonal): 205mm, max. platen distance: 250mm, ejector stroke: 50mm, screw diameter: 14mm, stroke volume range: 1cm³/15.3cm³, machine dimensions X/Y/Z: approx. 1500mm/550mm/1400mm, weight: approx. 500kg, control: Procan ALPHA. Documentation available. On-site inspection is possible.

Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clampi ...