blow mould used for sale

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 490 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 350 cm³/s Plasticizing Capacity: approx. 50 g/s (PS) Nozzle Contact Force: 65 kN Clamping Unit Clamping Force: 2,600 kN (260 t) Clamping System: ENGEL Victory tie-bar-less design Platen Size (H × V): approx. 1,000 × 950 mm Mould Opening Stroke: 600 mm Max. Daylight Opening: approx. 950 mm Min. Mould Height: 350 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: Hydraulic Hydraulic System Pressure: up to 160 bar Pump Motor Power: 22 kW Total Installed Power: approx. 30 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping Concept: Tie-bar-less design for improved mould accessibility and com ...

SPECIFICATIONS: Planer: 2500 mm Machinable width: max. 210 mm Working height: max. 150 mm Cardan shaft drive Drive shaft power: 5.5 kW Spindle configuration: I. Spindle: Bottom (4 kW) II. Spindle: Right (4 kW) III. Spindle: Left (5.5 kW) IV. Spindle: Right (4 kW) V. Spindle: Top (4 kW) VI. Spindle: Bottom (4 kW) VII. Spindle: Universal spindle (5.5 kW) With tools.

Injection Unit Screw Diameter: Ø 70 Injection Volume: approx. 1,540 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 6,500 kN (650 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,600 × 1,500 mm Mould Opening Stroke: 900 mm Max. Daylight Opening: approx. 1,600 mm Min. Mould Height: 450 mm Ejector Stroke: 250 mm Ejector Force (fwd / back): 110 / 70 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for compact footp ...

Injection Unit Screw Diameter: Ø 55 Injection Volume: approx. 517 cm³ Injection Pressure: up to 2,000 bar Injection Rate: approx. 220 cm³/s Plasticizing Capacity: approx. 35 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 60 kN Clamping Unit Clamping Force: 2,300 kN (230 t) Clamping System: Zhafir Zeres all-electric toggle system Platen Size (H × V): approx. 850 × 800 mm Mould Opening Stroke: 470 mm Max. Daylight Opening: approx. 940 mm Min. Mould Height: 220 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: All-electric servo drive Installed Power: 47 kW Full Load Current: 79 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: Zhafir SIGMATEK HMI touchscreen control Equipment / Features Drive Concept: Fully electric servo system for high p ...

Injection Unit Engine not working Screw Diameter: 65 Ø Injection Volume: approx. 1,025 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 450 cm³/s Plasticizing Capacity: approx. 80 g/s (PS) Nozzle Contact Force: 100 kN Clamping Unit Clamping Force: 5,000 kN (500 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,300 × 1,200 mm Mould Opening Stroke: 800 mm Max. Daylight Opening: approx. 1,400 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 90 / 60 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 37 kW Total Installed Power: approx. 55 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design f ...

Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for hi ...

Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12

SPECIFICATIONS: Mechanical working height adjustment Installed capacity: KW 5.5 Complete with accessories (spindles/counter spindles)

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible.

Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible.

Clamping force: 650kN, length: 4000mm, width: 1600mm, height: 2200mm, weight: 3.9t, an on-site inspection is possible.

Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible.

Set-out sleeve for quick montage

Moulder Weinig PFA 14/7 Specifications: Working width (mm) 140 Waves: 7 1. Shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5. Shaft: up 6. Shaft: down 7th Wave: Uni Wave

Clamping force: 800kN, an on-site inspection is possible.

Electrical injection moulding machine manufactured in 2005. This Husky Hylelectric H1000 RS95/80 features a clamping force of 10,000 kN and a maximum injection pressure of 2280 bar. It has a total platen size of 2070 x 1840 mm and a screw diameter of 80 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky Hylelectric H1000 RS95/80 machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2005. This Husky Hylelectric H1000 RS95/80 features a clamping force of 10,000 kN and a total platen size of 2070 x 1840 mm. It has a maximum injection pressure of 2280 bar and a screw diameter of 80 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky Hylelectric H1000 RS95/80 machine we have for sale. Contact us for further details.

SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Spindle configuration: bottom 3kw right 3kw left 3kw top 4kw universal 3kw - working width mm 230 - planing height mm 120 - volt. 380/50 - s/n 25 906/00 - year 1998

Table dimensions: 680 x 1.000 mm Motor output: 4 kW Spindle diameter: 30 mm reus: 3.000/4.500/6.000/8.000 U/min : 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic injection moulding machine manufactured in 2009. This Arburg Allrounder 520 A 1500-70 Alldrive features a clamping force of 1,500 kN and a maximum injection pressure of 2,500 Bar. It has a screw diameter of 15/18 mm and accommodates molds with a maximum height of 550 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 A 1500-70 Alldrive machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 600/130B eco features a clamping force of 600 kN and a maximum injection pressure of 1,840 Bar. It has a screw diameter of 28 mm and accommodates molds with a maximum height of 330 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 600/130B eco machine we have for sale. Contact us for further details.

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Bench router Brand: Bäuerle Model: SFM Year of construction: 1968 Spindle diameter: 30mm Clockwise/counterclockwise rotation Feeder Brand: Holzher Model: ET 117

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Clamping force: 80t, 3-phase mains supply: 400V, 50Hz, total rated current: 130A, upstream fuse: 160A, max. motor current: 30A, an on-site inspection is possible. The machine is located in Hungary.

Two Optitek mould carriers with a control unit in the middle are offered. Opening width min./max.: 600mm/800mm, operating pressure: 6bar, hydraulic pressure: 50bar-200bar, max. clamping force at 200bar: approx. 779.8kN, max. opening force at 200bar: approx. 978.3kN, power supply: 400V/32A. Dimensions X/Y/Z: approx. 2500mm/2050mm/2799mm. The mold carrier is used for handling PU foaming molds. Documentation available. Inspection possible by arrangement.

Hydraulic injection moulding machine manufactured in 2018. This ENGEL duo 5160/700 features a clamping force of 7000 kN and platen dimensions of 1510 x 1440 mm. The machine includes a screw diameter of 80 mm and a shot volume of 2061 cm³. If you are looking to get high-quality injection moulding capabilities, consider the ENGEL duo 5160/700 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2015. This KraussMaffei 1300-12000 MX features a clamping force of 13,000 kN and platen dimensions of 2210 x 1910 mm. The injection unit has a screw diameter of 105 mm and a shot volume of 5195 cm³. If you are looking to get high-quality injection moulding capabilities, consider the KraussMaffei 1300-12000 MX machine we have for sale. Contact us for further details.

Weibert F40 - Table milling machine Milling spindle 30mm 90° Speeds: 1400/ 3500/ 6000/ 8000 rpm Casting table length 1000 mm width 500 mm Motor 2.2kW 400V Integral Safety Rails 500mm Pressure Device MORI Table extension right and left Right-counterclockwise rotation of the milling spindle

Mains voltage: 400V, 3L+N, 230V, 3L, rated current: 7.5A at 400V, 11A at 230V, frequency: 50/60Hz, short-circuit breaking capacity: 3.5kA, weight: 370kg, an on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2006. This Arburg Allrounder 630S-2500-800/350 features a clamping force of 2,500 kN and a maximum mold height of 900 mm. It includes a screw diameter of 45/35 mm and a maximum injection volume of 195/140 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 630S-2500-800/350 machine we have for sale. Contact us for further details.

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA machine for joining parts of chairs, living rooms, furniture, etc. the FTA machine is made up of 3 automatic operating units : 1st unit : circular saw for cutting workpieces to length 2nd unit : spindle moulder for milling with hydraulic sliding carriage 3rd unit : drilling unit with multiple center distance head . there are 9 work programs that can be selected and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 . hydraulic sliding carriage - Boring unit . engine power Hp 3 . max. depth drilling mm. ...

Table dimensions: 2500x 780 mm Motor output: 7,5 kW Spindle diameter: , mm reus: 1.500 - 10.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor 1.4 kW/380 V/50 Hz, spindle 30 mm, tool max. D=200 mm, height and angle adjustment, table 650x600 mm, sliding table 530x280 mm, speeds 3000/6200/9000 rpm (fold down belt), cut-off stop extendable up to 2800 mm, hold-down, table extension 100x200 mm, suction nozzle D=100 mm

Electrical injection moulding machine manufactured in 2019. This YEAR-CHANCE YC-C 220S features a clamping force of 2,200 kN and a maximum injection volume of 546 cm³. It is equipped with a screw diameter of 55 mm and a maximum injection pressure of 1,797 Bar. If you are looking to get high-quality injection moulding capabilities, consider the YEAR-CHANCE YC-C 220S machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2020. This ZHAFIR ZERES ZE900/210B features a clamping force of 900 kN and a maximum injection pressure of 2,000 Bar. It has a screw diameter of 32 mm and accommodates molds with a maximum height of 410 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES ZE900/210B machine we have for sale. Contact us for further details.

Motor 5.0 kW/380 V/50 Hz/13 A, 2 speeds, clockwise/counterclockwise rotation, feed 3 rollers, switched socket for feed, stop can be rotated with fine adjustment, stop jaws 560x150 mm, work table 1010x900 mm, table extension right 500x440 mm, extension 2 m to 520 mm extendable, height and side adjustable slot table 810x400 mm, with hold-down and 90° adjustable stop, removable additional support 1070x170 mm with angle stop (Aigner), 4 speeds 3000/4500/6000/9000 rpm (2x belt fold, 2x electr. switchable), suction connection D=2x120 mm

Clamping force: 100kN, tie-bar spacing: 470mm, mains connection: 400V/50Hz/64A, control: CDIAS, weight: 5.7t, an on-site inspection is possible.

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Moulding machine Ital Form Completely made of stainless steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Moulding machine Ital Form 4 cylinders Rollers 500 mm long Dimensions: 850x1200x1150mm Electric power: 0.75kW Weight: 170 kg

TF170E Table milling machine with sliding table 1m with transverse stop

Carriage (LxW) 1000 x 240mm Working length of spindle 100mm Milling spindle diameter 30mm Spindle inclination +5 - -45° Spindle speed 1800 / 3000 / 6000 / 9000 Working height 900mm Suction nozzle diameter: 38/100 Dimensions (LxWxH) 1000 x 850 x 1200mm Motor 2.8KW 400V Weight 218kg

Table dimensions: 1100 (2300) x 760 mm Motor output: 7,5 kW Spindle diameter: 30 mm reus: 1500 - 10000 U/min Weight: ca. 880 kg Panhans swivel milling machine 245|200 ------------------------------------ Technical specifications ------------------------------------ Pos. 1: Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Extraction connection 2 x Ø 120mm Stepless speed regulation 1500-10000 rpm Engine power 7.5 kW (10 hp) Net weight approx. 880kg Technical description: 7 touch control, optionally usable, top and below 7 capacitive touchscreen, even with gloves operable (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling zero point selectable in the program, 3 reference points Simple menu structure through innovative touch control (max. 2 levels) Display ( ...