blow mould used for sale

Equipped with 11kW fan. Auction-ID: A1-49552-131

Fluid: P-Glycol. Volume 34 dm3. Maximum working pressure: 15 bar. Working temperatures: +50/0 degrees. Auction-ID: A1-49552-32

Unused. Capacity: 36 m3/min. TechTop Electric Motor 75kW. Rpm 2960/min. P = 1000-1800 Bar. Connection diameter: 150mm. With accessories and documentation. Auction-ID: A1-49552-91

Fluid: P-Glycol. Volume 34 dm3. Maximum working pressure: 15 bar. Working temperatures: +50/0 degrees. Auction-ID: A1-49552-31

Powerplus Electric leaf blower POWEG4030 - 3300 W Electric leaf blower - maximum air speed 250 km/h - garden tool Auction-ID: A1-40897-58

This machine is delivered without battery and charger. The Makita UB002GZ01 is the ultimate addition to your tool arsenal when vacuuming is just not enough. This powerful 40V Max XGT cordless leaf blower offers three settings – high, mid and low – so you can always choose the right blowing power, from coarse dirt to fine dust particles. Thanks to the ergonomic design, you can work comfortably in an upright posture, without straining your back. The rubber discharge nozzle prevents electrical conduction and thus contributes to extra safety at the workplace. In addition, you can also use this blower as a vacuum cleaner with an optional dust bag, which makes it even more versatile. With a runtime of up to 192 minutes on the lowest setting (when using a 4.0 Ah battery), this tool is ideal for long-term, efficient cleaning without interruptions. (body) Auction-ID: A1-40897-1052

This machine is delivered without battery and charger. The Makita UB002GZ01 is the ultimate addition to your tool arsenal when vacuuming is just not enough. This powerful 40V Max XGT cordless leaf blower offers three settings – high, mid and low – so you can always choose the right blowing power, from coarse dirt to fine dust particles. Thanks to the ergonomic design, you can work comfortably in an upright posture, without straining your back. The rubber discharge nozzle prevents electrical conduction and thus contributes to extra safety at the workplace. In addition, you can also use this blower as a vacuum cleaner with an optional dust bag, which makes it even more versatile. With a runtime of up to 192 minutes on the lowest setting (when using a 4.0 Ah battery), this tool is ideal for long-term, efficient cleaning without interruptions. (body) Auction-ID: A1-40897-1015

material width: 1500 mm material thickness: 3,00 mm no. of straightening rolls: 23 between stands ca.: 1530 mm thickness min. approx.: 0,50 mm diam. of the rolls ca.: 47 mm straight. speed ca.: 0-18 m/ min barrel length ca.: 1560 mm run-in height: 1150 mm total power requirement: 23 kW weight of the machine ca.: 9,00 t dimensions of the machine ca.: 4,30 x 1,80 x 2,60 m Specifications: - Max. vertical roll gap: 20 mm (Note: scale only goes up to 15 mm) - Lower support assembly: 5-point configuration with support rollers (individually adjustable) - Upper support assembly: 5-point configuration with support rollers - Bottom roll crowning - Circulating lubrication system for gearbox and drive shafts - Infeed table and outside table included - Reversible operation - Centralized grease lubrication for leveling roll bearings - MITSUBISHI ELECTRIC frequency converter (Type A800) - 22 kW drive m ...

This machine is delivered without battery and charger. The Makita UB002GZ01 is the ultimate addition to your tool arsenal when vacuuming is just not enough. This powerful 40V Max XGT cordless leaf blower offers three settings – high, mid and low – so you can always choose the right blowing power, from coarse dirt to fine dust particles. Thanks to the ergonomic design, you can work comfortably in an upright posture, without straining your back. The rubber discharge nozzle prevents electrical conduction and thus contributes to extra safety at the workplace. In addition, you can also use this blower as a vacuum cleaner with an optional dust bag, which makes it even more versatile. With a runtime of up to 192 minutes on the lowest setting (when using a 4.0 Ah battery), this tool is ideal for long-term, efficient cleaning without interruptions. (body) Auction-ID: A1-40897-1053

This machine is delivered without battery and charger. The Makita UB002GZ01 is the ultimate addition to your tool arsenal when vacuuming is just not enough. This powerful 40V Max XGT cordless leaf blower offers three settings – high, mid and low – so you can always choose the right blowing power, from coarse dirt to fine dust particles. Thanks to the ergonomic design, you can work comfortably in an upright posture, without straining your back. The rubber discharge nozzle prevents electrical conduction and thus contributes to extra safety at the workplace. In addition, you can also use this blower as a vacuum cleaner with an optional dust bag, which makes it even more versatile. With a runtime of up to 192 minutes on the lowest setting (when using a 4.0 Ah battery), this tool is ideal for long-term, efficient cleaning without interruptions. (body) Auction-ID: A1-40897-1051

KWH Whirlwind 760 leaf blower – 1998 – Honda GX240 8 hp – lot 301 Specifications: Brand: KWH Type: Whirlwind 760 Year of construction: 1998 Serial Number: 7042 Engine: Honda GX240 Fuel: Petrol Engine type: 1-cylinder 4-stroke Displacement: approx. 242 cm³ Power: 8.0 hp / approx. 5.9 kW Cooling: air-cooled Ignition: electronic Starting system: manual start / pull starter Fan: centrifugal fan Air capacity: approx. 70–75 m³/min (approx. 4,200–4,500 m³/h) Fan housing: steel Version: hand-guided Own weight: approx. 72 kg Dimensions: approx. 151 × 70 × 92 cm (L × W × H) Features: Honda GX240 petrol engine Centrifugal fan Steel fan housing Low-set discharge opening Long handle with controls at your fingertips 2 pneumatic tires Particularities: Operation not extensively tested. This concerns plot 301. Lot 302 and lot 303 also concern KWH  ...

Votex Whirlwind 750-M Year of construction 2011 Sourced from weedtrac Machine has been put away in working order, no longer tested Auction-ID: A1-47389-348

mileage: km, track width: 1720mm, equipped with: Leitwolf Snow blower (4400mm), front slide (folds out to 5300mm), front linkage, rear linkage, 3-person cab, automatic track tensioner, hydraulic functions on rear, MAN D2876 LE 103 6-cylinder turbo diesel engine, digital display, (hour reading not readable, staggered to 0, estimated hour reading: 6000), Auction-ID: A1-47389-57

Votex Whirlwind 760E Year of construction 2007 Sourced from weedtrac Machine is working, any videos available! Auction-ID: A1-47389-347

KWH Whirlwind 760 leaf blower – 1998 – Honda GX240 8 hp – lot 302 Specifications: Brand: KWH Type: Whirlwind 760 Year of construction: 1998 Serial Number: 7042 Engine: Honda GX240 Fuel: Petrol Engine type: 1-cylinder 4-stroke Displacement: approx. 242 cm³ Power: 8.0 hp / approx. 5.9 kW Cooling: air-cooled Ignition: electronic Starting system: manual start / pull starter Fan: centrifugal fan Air capacity: approx. 70–75 m³/min (approx. 4,200–4,500 m³/h) Fan housing: steel Version: hand-guided Own weight: approx. 72 kg Dimensions: approx. 151 × 70 × 92 cm (L × W × H) Features: Honda GX240 petrol engine Centrifugal fan Steel fan housing Low-set discharge opening Long handle with controls at your fingertips 2 pneumatic tires Particularities: Used condition with signs of wear and age. Paint damage and localized superficial corrosion pres ...

KWH Whirlwind 760 leaf blower – 1998 – Honda GX240 8 hp – lot 301 Specifications: Brand: KWH Type: Whirlwind 760 Year of construction: 1998 Serial Number: 7042 Engine: Honda GX240 Fuel: Petrol Engine type: 1-cylinder 4-stroke Displacement: approx. 242 cm³ Power: 8.0 hp / approx. 5.9 kW Cooling: air-cooled Ignition: electronic Starting system: manual start / pull starter Fan: centrifugal fan Air capacity: approx. 70–75 m³/min (approx. 4,200–4,500 m³/h) Fan housing: steel Version: hand-guided Own weight: approx. 72 kg Dimensions: approx. 151 × 70 × 92 cm (L × W × H) Features: Honda GX240 petrol engine Centrifugal fan Steel fan housing Low-set discharge opening Long handle with controls at your fingertips 2 pneumatic tires Particularities: Used condition with signs of wear and age. Paint damage and localized superficial corrosion pres ...

With QCC330 charging station and 2x 36V Li-ion batteries. Auction-ID: A1-49793-1014

With QC330 charging station and 2x 36V Li-ion batteries. Auction-ID: A1-49793-55

2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-50091-4056

2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-50091-318

2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-50091-319

Holmes HR32 Blower Positive displacement air blower, HR32, with Brook Crompton 45Kw motor, RPM 1470, all mounted on frame, 3Ph

for the production of pillow candies Power 10 - 250 kg/h, depending on type and size of the candies

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Mouldingpresse The MP / 3E is a hydraulic press for the production of Clayprofilen such as rubber seals, protective, decorative or chrome strips. By inserting an appropriate form template in the bolt head, almost any profile can be produced up to a diameter of 65 mm. Manufacturer: Wadhwa Type: MP / 3 p Year of construction: 1995 Temperature controller Speed controller Via a rotary control a stepless adjustment of the speed is possible heated sealing head The built-in heater in the bolt head is adjustable Foot switch Weight: 125 kg Fully functional All information without guarantee Sold only to businesses

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

Four nearly new moulds for garden wall and fence.

REP model V68 Y20W vertical rubber injection presses, Type G8, year 2003, Clamp force 4000kN, Platen size: 630 x 800mm, Distance between columns: 730/440mm, Daylight: approx 1000mm, Injection unit type Y2000, Piston dia 81.5mm, Shot capacity: 2000cm3, Injection pressure: 1500 Bar Top and bottom ejectors. O/a dimensions: 2950mm x 1410mm x 4800mm high, weight approx 12000kgs. Complete and in very good condition (not operated for over 2 years).

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI

The list of equipment for sale from molding line: 1. Moulding Machine HSP-2D (22kW, 70f / h) 2. Lifting table 3. Pressure plate 4. The dispensing sand tank

Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

1 x Wickert 500ton upstroke vacuum press, Type: WKP5000/5/3, Year of manufacture: 1997, Machine Number: 2885 with 500mm x 500mm electrically heated platens, sliding bottom platen with ejector table, Daylight: 340mm 400/690V, 50Hz, 22kW. Heaters 12.5kW, Pressure 300 Bar Fixed guarding to rear, SICK light curtain guards to the front. With Siemens S5 PLC controls. In very good condition.

KALMEIJER Pastry moulding rolls (standard A,B + C rolls)for KGM Christmas motifs used, good condition, different motifs: Spekulatius sorted German males Skat Nikolaus with fir tree (special roller)

Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

9 injection moulding tools for the production of rollers - along with a wide range of accessories As a result of a restructuring of our customer, we offer for sale 9 injection molds for the production of various types of castors for furniture and chair castors, including customer addresses. The pictures represent the basic nature of the different roles. These injection molds could be used to set up a complete production facility for the production of rolls. The basic body of the castors can then be supplemented with various inserts (depending on the customer's requirements) for final attachment to the end product, e.g. a chair. This offer also includes the following accessories - which are part of the production process: • 1 x punching tool (for the roller roller) • 1 x press (for pressing the pins and shafts) • 1 x automatic assembly machine for spring washers � ...

warehouse no.: 501525 manufacturer: BATTENFELD Typ: Druckplatte 4505715 year of construction: 2012 We offer a mould plate / pressure plate for injection moulding machine from BATTENFELD for model HM II 4500, number 4505715. Pressure plate for injection molding machine Battenfeld HM series II 4500, Art. Nr.: 4505715th printing plates include injection molding machines to the highly stressed machine parts. The pressure plate is offered immediately from stock in Langenfeld (Rheinland), available

It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 1 Number of rollers: 2 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 1100 mm Height: 1200 mm Height of dough entry: 1180 mm H ...

It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 2 Number of rollers: 4 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 630 + 450 mm Height: 1200 mm Height of dough entry: 1180 m ...

Code: 0441 Brand: CASADEI Model: SYNCRO Four side straightening planer with 4 spindles for wood, window frames, furniture, garden furniture, sawmill and various Technical data: One-piece steel base Min/max working width mm 20/180 Min/max working height mm 6/105 Infeed table length mm 2000 Infeed table and fence adjustment mm 10 Spindles diameter mm 35 Feeding speed 6/12 mt/min Rebating cutterhead diameter mm 120 Powered feeding siystem raise Composition: 1° Spindle surface planer - Motor Hp 10 - Size mm 190 x 100 Z3 2° Spindle right spindle moulder - Motor Hp 7,5 - Size mm 120 x 100 Z3 3° Spindle left spindle moulder - Size mm 120 x 100 Z3 4° Spindle thickness planer - Motor Hp 10 - Size mm 190 x 100 Z3 Diameter of suction ports mm 120 N° 4 Planer heads Overall dimensions mm 3000 x 1160 x 1555 h Weight kg 900

Flat 4-sided blade (package, 10 pcs.) 12x12x1,5 Flat 2-sided blade (package, 10 pcs.) 20x12x1,5 Flat 2-sided blade (package, 10 pcs.) 30x12x1,5 Flat 2-sided blade (package, 8 pcs.) (used) 50x12x1,5

0: 4 St. 0: 120 mm Feed speed: stufenlos, 3-18 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3 St. 0: 80 mm Feed speed: (4 Stufen): 4/8/9/18 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm MARTIN Cast Stop Jaws Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Swivel device for milling fence Centrex Protection (Aigner) ...

with spare screw, high-pressure hose and various spare parts - see pictures

Superset NT 31 with 14 axis control and 1000 programs Feed rollers in front of the dressing spindle Position 1 - Dressing spindle Position 2 - Right spindle with 2 axis ( up / down ) Position 3 - Left Spindle Horizontal Top with 3 Axis (Up/Down and Diameter Setup) Position 4 - First Horizontal Spindle with 2 Axis (On/Off and Diameter Setup) Up/Down Coupled with Position 5 Position 5 - Second Lockers Horizontal Top with 3 Axis ( Up/Down and Diameter - Setup ) Position 6 - Second Spindle Horizontal Bottom with 2 Axis ( Up / Down ) Motors 6 x 7.5 KW Feed Continuously variable from 6 to 36 rpm with 4 KW Feed roller before and after position 2 Vertical Right with axis control ( on / off ) Planer heads 5 pieces on position 1-2-3-4-5 type. TERSA

motivated seller Edible Oil PET Preform Mould Cavities: 32 Product 1,5 liters Neck Finish 29mm Working Hours: 43.843 Hours Preform Weight: 41 Grams + Core Set for 36 Grams Husky G-line and X-line compatible

Engel injection moulding machine old

Code: 0234 Brand: SPANEVELLO - ITALY Model: SC 17 Automatic 7-spindle moulding machine for window frames, frames, profiles, joinery, carpentry, wooden packaging and various Technical data: Sturdy structure with electro-welded steel base Working width 170 mm Working height 120 mm Variable feed speed 5/25 mt/min Automatic lifting of upper beam Composition: 1° spindle: Surface planer - Motor Hp 4 2° spindle: Right vertical spindle moulder - Motor Hp 4 3° spindle: Left vertical spindle moulder - Motor Hp 4 4° spindle: Right vertical spindle moulder - Motor Hp 4 5° spindle: Thickness planer - Motor Hp 7,5 6° spindle: Right vertical spindle moulder - Motor Hp 4 7° Universal spindle 180° - Motor Hp 8,5 Diameter of shafts of working heads mm 40 Shaft rotations of working heads 6000 rpm Power of feed motor Hp 2 Suction inlet diameter 150 mm Overall  ...