blow mould used for sale

Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2002. This DEMAG 420/810 - 2300 features a clamping force of 420 tons and a maximum mold height of 1530 mm. It has a screw diameter of 70 mm and a shot volume of 1090 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG 420/810 - 2300 machine we have for sale. Contact us for further details.

Clamping force: 1800kN, screw stroke: 200mm, speed: 300rpm, L/D: 20, nozzle stroke: 400mm, nozzle contact force: 50kN, hopper volume: 80l, tie-bar spacing: 520mm/520mm, platen dimensions X/Y: 760mm/760mm, mold installation height range: 250mm-600mm. Machine dimensions X/Y/Z: 6200mm/1700mm/2750mm, weight: approx. 12000kg, operating hours (Nov. 2025): 27271h. Including handling and protective enclosure. Documentation available. An on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine.

Code: 0294 Brand: SAC Model: TS 120/C Spindle moulder with sliding carriage for milling wood, plastics, composite materials, joinery, window frames and various Technical data: Steel base with cast iron table Table dimensions mm 1100 x 700 Sliding table dimensions mm 1100 x 260 Sliding table stroke 1060 mm Table height 850 mm Shaft diameter 35 mm Max tool diameter 330 mm Vertical spindle stroke 160 mm Spindle rotation speed rpm 2900/4000/5800/8000 Motor power 4 Hp Suction mouth diameter 120 mm Overall dimensions mm 1100 x 1000 x 1200 h Weight kg 580

Machine type: Injection Moulding Machine Manufacturer: Arburg Model: Allrounder 420 V 1000-150/60 Control: Arburg control Year: 1998 Serial number: 172437 Working hours: n/a Clamping force: 1000 kN Mould opening stroke: approx. 250 / 500 mm Distance between tie bars: approx. 420 x 420 mm Mould platen size: approx. 545 x 545 mm (from document) Screw diameter: 25 / 18 mm Shot weight (PS): approx. 49 / 18 g Operating voltage: 400 V / 3~ / 50 Hz Total connected load: approx. 31.0 kW Injection unit: Size 150 / 60 Hopper: Yes Accessories: Documentation, hopper, control unit Remarks: Machine in used condition. Control operational (screen visible). Includes documentation. Typical signs of use present. Own mass: approx. 3,700 kg Dimensions (LxWxH): approx. 4,700 x 1,700 x 2,100 mm Auction-ID: A7-45993-5

Key data: 1300 kN, 127 g/PS, 35 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ARBURG Type: 420C1300-350-60 Year of Make: 2003 Clamping force: 130 tons Spar spacing 420 x 420 mm Screws DN 1: 35 mm Moulded part weight in hp: 127 g Screw DN 2: 25 mm Moulded part weight in hp: 45 g Control: Selogica Equipment: . Core train -Robots

Ejector stroke: 180mm, ejector force: 44kN, nozzle contact pressure: 38kN, hopper capacity: 75dm³, mold clamping force: 1962kN, mold opening stroke: 560mm, mold installation height: 190-660mm, clear distance between the tie bars: 540x540mm, max. mold installation height: 378x378mm, length: 6275mm, width: 1520mm, height: 1965mm, weight: 8.3t. An inspection on site is possible.

Hydraulic injection moulding machine manufactured in 2008. This HAITIAN MARS 5300/4500 features a clamping force of 530 tons and a minimum mold height of 240 mm. It includes a screw diameter of 80 mm and a shot volume of 2212 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MARS 5300/4500 machine we have for sale. Contact us for further details regarding this machine.

Technical data Approximate dimensions at location (L×W×H): 8,300 × 2,500 × 2,330 mm Weight (approx.): 33,000 kg Serial Number: 161394 Product Description Clamping unit Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Min./Max. tool height: 450 / 950 mm Maximum opening width: 1,800 mm Injection unit Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g Electric-hydraulic equipment Nominal power of the pump motor: 55 kW Heating capacity: 62 kW Auction-ID: A1-46872-53

Technical data Approximate dimensions at location (L×W×H): 8,000 × 2,250 × 2,200 mm Weight (approx.): 5,600 kg Product Description Serial Number: 42503 Clamping unit Clamping force: 4,000 kN Dimensions of the clamping plates: 1,300 × 1,080 mm Min./Max. tool height: at least 350 mm Maximum opening width: 1,300 mm Injection unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar Electric-hydraulic equipment Nominal power of the pump motor: 45 kW Auction-ID: A1-46872-52

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 350-3000 CX features a clamping force of 350 t and a screw diameter of Ø 80 mm. It offers a PP injection capacity of 640 g and a maximum mould opening of 1260 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 350-3000 CX machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2023. This SUMITOMO SHI DEMAG IntElect2 S 220/660-1400 features a clamping force of 2,200 kN and a maximum mold opening stroke of 550 mm. The machine offers a daylight between platens of 1,150 mm and an injection unit size of 1400. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 S 220/660-1400 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine.

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4000 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It offers a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4000 CX machine we have for sale. Contact us for further details.

Clamping force: 1600kN, tie bar spacing: 570x520mm, platen dimensions: 810x805mm, max. mould diameter: 804mm, rotary table diameter: 735mm, min. installation height: 300mm, opening stroke: 650mm, opening force: 84kN, tie bar diameter: 80mm, max. daylight opening: 950mm, ejector force: 41.2kN, ejector stroke: 200mm, oil tank volume: 400l, standard drive power: 37kW, hydraulic operating pressure: 240bar, control system: Battenfeld Unilog B4, weight: 7.8t. An on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2023. This HAITIAN Jupiter 3 JU 6500 features a clamping force of 6500 kN and an injection volume of 2212 cm³. It includes a maximum screw speed of 165 rpm and a tie bar distance of 1040 × 910 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Jupiter 3 JU 6500 machine we have for sale. Contact us for further details regarding this machine.

- Spindle 1st dressing with table of 2500mm - Spindle 2. First right spindle - Spindle 3. First left spindle with 2nd axis control (dimension + height + setup) - Spindle 4. Second right spindle with 2nd axis control ( dimension + height ) - Spindle 5th upper spindle as thickness and profile spindle with 1st axis control ( dimension ) - Spindle 6. Lower spindle as plaster spindle or profile spindle - Spindle 7. Universal spindle as profile spindle or glazing strip saw Motors 7 x 7.5 KW 380v 50H. Feed infinitely variable 6-36 m Operating hours per month: average approx. 51 hours

Capacities : Thickness × width: 120 × 230 mm Minimum / maximum width: 20 – 230 mm Minimum / maximum height: 8 – 120 mm Minimum length single piece: 750 mm Speeds: Variable feed: 5 to 24 m/min Spindle rotation speed: 6,000 rpm Composition and equipment: 2,500 mm Input table 2,500 mm Motorised adjustment of machining width and height Adjustments accessible on the front panel with the hood closed SIKO digital meters on each setting Wrap-around and sound-absorbing enclosure with panoramic bay Tool shafts Ø 40 mm Shaft configuration (7 shafts): Lower horizontal shaft: 5.5 kW (7.5 hp) Right rotor: 11 kW (15 hp) Left rotor: 11 kW (15 hp) Vertical shaft: 5.5 kW (7.5 hp) Upper horizontal shaft: 7.5 kW (10 hp) Lower horizontal shaft: 7.5 kW (10 hp) Universal shaft: 5.5 kW (7.5 hp) Dimensions (estimated)Approx . 5,800 × 2,100 × 1,900 mm (to be confirmed) Weight (estimate): Approx. 4 ...

Battery mould with 21 compartments Year of manufacture: 1999 - Cell dimensions: 8.50 m x 3.01 m - 19 partition walls, each 6 tonnes - 4 outer walls, each 10 tonnes, - suitable for wall thicknesses: 12cm, 18cm and 20cm were produced, other wall thicknesses are also possible, depending on the foot formwork installed. - Includes remote control for opening and closing - The flap is folded down depending on the direction of travel and pressed shut hydraulically - Platforms with ladders - 4 hydraulic cylinders - 2 electric motors - Synchronised chain with cover for adjusting the partition walls - Control cabinets with control unit - Operation without vibrators, as SVB is used

SCM T130 Low Spindle Milling Machine Spindle Diameter 35mm Total length of the spindle 160mm 5.5kw main motor Rotation speed change on the belt 3000/4500/6000/7000/10000 Spindle rotation left and right Electric spindle lift

The blower is with side admittance completely with impulse.

Kosme KSB 3000, with 3 tools, achievement approx. 3300 Fl/h with 1.5 l

Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.

; ready for operation

The blower step is general-outdated and available immediately. the rotary piston blower can be also delivered completely.

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

see pictures

The blowers are fully incorporated into a soundproof cover with base frame, safety valve, check valve and mounting parts. The motor can be installed according to customer specifications. The stage will be overhauled on request.

AERZEN rotary blower GMB 14.8 - used, reconditioned - DESCRIPTION 3-bladed fan speed with integrated pulsation reduction Basic rack with integrated discharge silencer Tensioning device for the belt drive Pressure / vacuum valve Connection box with built-in non-return valve and flange for valve and starting discharge Drive motor (three phase motor) MANUFACTURER'S SPECIFICATIONS Manufacturer: Aerzen, Germany Type: GMB 14.8 YOM: 1976 TECHNICAL DATA Intake rate: 15,5 m ³/min Flow pressure: 0,73bar (max. 1,0 bar) Delta p: 730mbar Blower rev: 1.337rpm Motor: VEM 37kW 380Volts 50Hertz 1.460rpm CONDITION used, reconditioned, ready for operation SERVICE/RECONDITIONING New pulsation silencer box, new oil, new spray painting VISIT Please visit us at any time for an inspection. Test run is possible. REMARK Large stock of used machinery and equ ...

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002

Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

The fan speed is refurbished, can be supplied as a complete unit.

Industry - fan / blower manufacturer: DSD air Division (today: Ferrostaal air technology GmbH) Type: Dara 1000 R Year of construction: 1992 Flow rate: 35,000 m ³/h Pressure: 6,500 PA Speed min.: 2,035 U/min Speed max.: 2,160 rpm Power: 75 kW Air density: 1.1222 kg / m ³ Maximum temperature: 90 ° C Original price: 68.000,00 € net In very good condition!

; ready for operation

Lock valve vacuum pump Status: used, tested, functional Manufacturer: Kinney Type: KT-300 D Engine: 400V equipment: mineraloil nominal suction digesters: 25 m3/h End pressure: <0.008 mbar (abs.) Including: user manual o elfilling (

Waelz Piston Pump (Rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: WA 251 Gewaehrleitung: 12 months Zubehoer: User Manual; Spare parts list; Oil filling delivery time: from stock

; ready for operation

Waelz Piston Pump (Rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: WA 501 Gewaehrleitung: 12 months from delivery Zubehoer: User Manual; Spare parts list; Oil filling delivery time: from stock; ready for use

Hammer muehle with blower, filler hopper and easily changeable sieves for the wuenschte fineness of the grinding material. Hammermuehle KH3 11 kW

Waelz piston pump (rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: Ruvac WS 501 Gewaehrleitung: 12 months Spare parts list; Oil filling delivery time: from stock; ready for use

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use

wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 mm output: 150/300 St./min. -for steel pins-; very good

Waelz piston pump (rootsblowesis) Manufacturer: Pfeiffer Type: WKP 2000 A Suction suction systems: approx. 2065 m3/h engine: 5.5 KW Cat. Nr.: PP W61 000 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, user manual; ready to use

Auxillary blower for Wichmann WX12V28 Allweiler SNBA-M280GR43C9.2/1w12