blow mould used for sale

2 injection molding machines BATTENFELD HM 65/210 The injection molding machines are fully operational, they are constantly used on the production line. The price is without peripherals - plastic haul and picker. Working hours approx. 52,000. The price is for one injection molding machine.

Year of manufacture: 2011 Screw diameter: 100 mm Weight: 4006 cm3 PS injection weight: 3645 g Closing force: 1300 t

thermoset BMC, included in the sale 2 pcs Tool-Temp tempering device - water, 1 pc Wittmann W711-0507 robot, Duroplat D45 unit (dry sets), 2 pcs Regloplas tempering device,

Table dimensions mm: 1000 x 900 With drive system

Year of manufacture: 2015 Screw diameter: 55 mm Chamber volume: 665 cm3 Shot weight: 604 g

Year of manufacture: 2004 closing force: 500 t Columnless machine inspection possible video available top condition

DEMAG ET 650/5200 - non-functional broken column Robot - broken year of manufacture: 1997 v. no. 8631032 auger: 95 mm weight: 2835 cm3 closing force: 650 t clamping plates: 1450/1350 between columns: 1000/900

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

thermosetting injection molding machine - BMC, included in the sale are 2 pcs Tool-Temp TT-162-E temperature device, LRX 250 manipulator, conveyor, vacuum pump Busch R5 RA 0025 F 503, possibility of conversion to thermoplastic

LGH-450M injection molding machine made in Korea. Year of construction 2012 Number of hours worked: 35,000 Clamping force 450 tons. Screw diameter 70 mm. The technical and visual condition is very good. Double-plate closing system

Demag Ergotech 110/470-430 machine The machine, connected, is working. In good condition Year of production: 1999 For sale immediately. Possibility to view and start the machine. Last machine inspection: 09/2022

screw diameter 35mm a complete GO was done on the machine last year, so the machine is fully functional; the machine was purchased as new with a price of EUR 111,481!

Clamping force: 5500 kN Mold plate dimensions: 920 x 830 mm Screw diameter 80 mm The machine is in very good condition, with full equipment (the entire production cell), ready for production.

OIMA STRATOS 400 KP plastic injection machine Year 2008

According to the PDF prospectus!

Woojin Plaimm 550 Ton injection molding machine year of production 2012 clamping force 550 tons screw diameter 90 mm. double-plate closing system. Technical and visual condition is very good. The machine is used very little.

Krauss Maffei EX 160/180 injection molding machine Year of production 2012 Clamping force 160 tons Screw diameter 22 mm. (Possibility of replacing the screw up to a diameter of 35 mm.) Number of hours worked: 20,068 h

VERTICAL INJECTION MACHINE FROM MANUFACTURER JSW top condition inspection possible video available

Battenfeld TM3500/1900 Injection moulding machine Used battenfeld machine for sale, machine is unplugged, but it was in good working condition

250 ml bottle form set with shampoo nut

Krauss Maffei KM90/50-190 CD injection molding machine The machine was working in a CD production line

We offer a Negri Bossi CANBIO V90 injection molding machine for sale.

Forms 9 pcs. for the production of Styrofoam Pins A package of professional injection moulds for the production of pins for polystyrene ( 9 pcs. molds from 12-36 sockets ) Name 1 St. 10 / h – 120 mm 12 Cold Channel 2 Wedks 10 / h – 160 mm 12 Cold Channel 3 St. 10 / h – 180 mm 12 Cold Channel 4 Squid 10 / h – 200 and 220 mm 12 Hot channel 5 Squid 10 / h – 240 and 260 mm 12 Hot channel 6 Wed.5 nails /70, 90,120, 140 mm 36 Cold Channel 7 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 8 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 9 Nail caps 36 Cold Channel

Engel ES2000H750L Injection Moulding Machine 90 Kw Working hour: 149658

Oval openwork Laundry basket // 1860 kg; hot-runner-2 points; Pneumatic servo.; very good codition ; made by Italy dimension mould - 795/595/560 mm // dimension basket - 580/390/240 // weight - 410 g

Oval Bathtub // 1860 kg; hot-runner-2 points; very good condition ; made by Italy // dimension mould - 800/595/560 mm // dimension Bathtub - 595/395/210 // weight - 540 g

Battenfeld TM 550/4500 Injection Moulding Machine 550 Ton 55 Kw Working hour: 48500

Fully functional machine in good condition. Screw diameter 45,0 mm Tie bar spacing (H) 500,0 mm Tie bar spacing (V) 500,0 mm Shot weight 291,0 g Pressure on material 1910,0 bar

Capacity 700 tones Distance between columns 8080cantimeter

Ties for snowbord // weight - 580 g // 6 pcs. new moulds

molds fo caps 1. for glass jars coffe - Caps for glass jars coffe 72 mm and 65 mm - 1500 Euro 2. Saint Gabin - few moulds 6 cav. - 3.000 Euro

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

BMB KW28 PI/1300 Injection Moulding Machine 280 Ton Working hour : 28323

BMB 38 PI/2200 Injection Moulding Machine Working hour : 58806 (May 2023)

Demag Extra 1500-600 injection molding machine Clamping force 150 tons Machine in very good condition.

BMB KW38 PI/2200 Plastic Injection Moulding Machine Machine is in working condition

Arburg Allrounder 420C 800 250 Injection molding machine Arburg Allrounder 420C 800 250 injection molding machine Year 2004

Haitian 700 Ton Plastic injection moulding machine Machine is in good condition

Battenfeld TM Xpress 270/1350 injection molding machine is on sale 2011 Battenfeld TM Xpress 270/1350 Injection molding machine

Box for cycle - 3 pcs. new moulds price 10.000 Euro

NegriBossi injection molding machine for sale 2008 NegriBossi v320 Injection molding machine

Injection moulding machine Krauss Maffei KM200-1400C1 Clamping force 200 Ton Distance between columns : 550 cm x 550 cm

Italtech MSK 2250/13000 capacity 2200 Ton Machine is in working condition

Distance between column : 460 mm x 460 mm Minimum mold clamping 220 mm max 550mm. 125 Ton Machine is in good condition

Manufacturer Krauss Maffei Model KM 350-1650 B1 Year 1995 Located in Turkey Machine can be seen in working condition 350 Ton

Number of working hours : ONLY 596 25 Ton Machine is like new

Injection moulding machine Krauss Maffei KM200-750CX Machine is in good condition Clamping force 200 Ton

Used Battenfeld machine for sale, old but low hours Battenfeld BK-T 1800/1000 Injection moulding machine

POTVEL 35 vertical electric press Distance between columns: 35x27 Maximum pressure 210 Kg / cm2

Robot + magnetic plate Screw diameter : 120 mm Distance between bars : 1420 mm x 1270 mm Platen size : 2065 mm x 2060 mm Mold height : Max : 1400 - Min 500 Machine is in excellent condition