129,528 used machines on RESALE, but how to find them? Machine Search
Key data: 1100 kN
Wittmann Battenfeld EcoPower 110/350 / Electric motor / Operating hours: approx. 15,000 in automatic mode Year of Make: 2019 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 682x682 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 21,800 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Dimensions: Weight: 4800 kg Length/Width/Height: 4.91x1.42x2.10 m ...
Key data: 1000 kN
Battenfeld HM 100/525 with the Battenfeld R10S robot / Operating hours: approx. 19,000 in automatic mode Year of Make: 2008 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total number of operating hours: 26,580 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Battenfeld R10S robot Year of Make: 2015 5-axis robot: 3 axes are driven by servo motors (electric); Axis B - pneumatic, Axis C Robot with adapter Purchase of the r ...
Key data: 2500 kN
Demag Ergotech Compact 250-80 Year of Make: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Spray pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tiebar spacing: 280x280 mm Size of the clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. ...
Key data: 500 kN
Sumitomo Demag IntElekt 50/370-200 / Electric Machine Year of Make: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Spray pressure: 1580 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 370x370 mm Size of the clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Control with hot runners Hardened injection unit - Bimetal Central lubrication It is possible to change the screw diameter Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected m ...
Key data: 800 kN
Demag Ergotech System 80/420-430 Year of Make: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Spray pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 350 kN
Krauss Maffei KM 35-55 CX / Machine in very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : Clamping force: 35 t Tiebar spacing: 320x320 mm Size of the clamping plates: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touch Screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air Valve x 2 Control with hot runners x 6 Hardened injection unit - Bimetal The machine was regularly serviced by the authorized service Krauss Maffei in Germany It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/Width/Height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating capacity: 3.78 kW Total power: 14.78 kW All offered machines are s ...
Key data: 1000 kN
Sumitomo Demag Systec 100/420-310 with the Sepro SR SDR11 S3 TRANS robot / hybrid machine Year of Make: 2013 Injection unit: Screw diameter: 35 mm Injection weight: 149 g Spray pressure: 2024 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Sepro SR SDR11 S3 TRANS Year of Make: 2013 5-axis robot: 3 axes are driven by servo motors (el ...
Key data: 800 kN
Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of Make: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Spray pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touch Screen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hardened injection unit - Bimetal Sprue Picker Sepro Industrial Robot 55 Year of manufacture: 2018 It is possible to buy a Moretto raw material feeding system at an additional cost The set includes: - Screw dosing device, volumetric with container - Conveyor with proportional valve Dimensions: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heatin ...
Key data: 3500 kN
Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR853 robot Year of Make: 2015 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR853 Year of Make: 2016 6-axis robot: 5 axes are driven by servo motors (electric) ...
Key data: 1300 kN
Krauss Maffei KM 130-750 CX Year of Make: 2010 Injection unit: Screw diameter: 40 mm Injection weight: 228 g Spray pressure: 2500 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 130 t Spar spacing: 470x470 mm Size of the clamping plates: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Air Core Pull x 6 Control with hot runners x 18 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 3500 kN
Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR833 robot Year of Make: 2012 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull controlled with proportional valve x 1 Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR833 Year of Make: 2011 4-axis ...
Key data: 800 kN
Engel Victory 500/80 Tech / Production line with the Engel Viper 12 robot Year of Make: 2011 Injection unit: Screw diameter: 45 mm Injection weight: approx. 295 g Spray pressure: 1598 bar Dosing volume: 318 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Hydraulic core pull x 3 Hardened injection unit - Bimetal Robot Angel Viper 12 Year of Make: 2014 5-axis robot: 4 axes are driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Purchase of the robot at an additional cost Dimensions: Weight: 5300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pumps/motor: 15 kW All off ...
Key data: 2000 kN
Krauss Maffei KM 200-1400 CX with the Krauss Maffei LRX Easy Control 100 robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Injection weight: 617 g Spray pressure: 2007 bar Dosing volume: 679 ccm Clamping unit: Clamping force: 200 t Tiebar spacing: 560x560 mm Size of the clamping plates: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touch Screen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air Valve with Vacuum Measurement x 1 Hydraulic core pull x 3 Air Core Pull x 3 Control with hot runners x 10 Hardened injection unit - Bimetal Energy-efficient machine – has a system with 3 hydraulic pumps with variable power Parallel movements Proportional valve on the injection unit – precise injec ...
Key data: 1000 kN
Engel Insert 80V/80V/100 2F/2-K Ti-bar-less Machine, Vertical / Perfect Technical Condition Year of Make: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Ti-bar-less machine with two vertical injection units, with turntable Air Valve x 6 Hydraulic core pull x 2 Control with hot runners x 12 Infrared protective curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by the authorized service provider Engel in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW Price: On request
Key data: 2500 kN
Krauss Maffei KM 250-2000 CX Blue Power with the Sepro Industrial Robot SR S5-35HL S4 Trans robot Year of Make: 2019 Injection unit: Screw diameter: 70 mm Spraying weight: 980 g Spray pressure: 1877 bar Dosing volume: 1077 ccm Clamping unit: Clamping force: 250 t Tiebar spacing: 630x630 mm Size of the clamping plates: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air Valve with Vacuum Measurement x 1 Air Valve x 1 Hydraulic core pull x 3 Air Core Pull x 1 Control with hot runners x 16 Hardened injection unit - Bimetal Energy-efficient machine – has a system with 3 hydraulic pumps with variable power Parallel movements Proportional valve on the injection unit – precise injection Additional ...
Key data: 1100 kN
Engel Victory 330/110 Tech / Production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of Make: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Spray pressure: 1670 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Hardened injection unit - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Dimensions: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 k ...
Key data: 4000 kN
Krauss Maffei KM 400-3000 GX Blue Power with the Krauss Maffei LRX 250 robot Year of manufacture: 2018 Injection unit: Screw diameter: 80 mm Injection weight: 1464 g Spray pressure: 1855 bar Dosing volume: 1608 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 920x830 mm Size of the clamping plates: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. 19,000 h in automatic mode Euromap 67 Robot interface Min./max. tool installation height: 400/900 mm Air Valve x 4 Hydraulic core pull x 4 Control with hot runners x 36 Self-closing nozzle x 10 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Function for automatic pulling out of the upper spar Machine has been regularly serviced by the authoriz ...
Key data: 1800 kN
Engel e-max 440/180 / Electric machine Year of Make: 2009 Injection unit: Screw diameter: 40 mm Injection weight: approx. 199 g Spray pressure: 1950 bar Dosing volume: 220 ccm Clamping unit: Clamping force: 180 t Tiebar spacing: 520x520 mm Size of the clamping plates: 760x775 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - touch screen Additional equipment: Machine in very good technical condition, worked in clean production Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 3 Hardened injection unit - Bimetal Parallel movements Central lubrication Automatic tool height adjustment Kistler Sensor - Tool Pressure Control Original Tool Crane Dimensions: Weight: 7200 kg Length/Width/Height: 5.87x1.42x2.00 m All offered machines are started by our service technicians before they are sold ...
Key data: 1400 kN
Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimetal M ...
Key data: 2750 kN
Engel ES 1350/275 HL with the Engel ERC 53/1-E robot / machine in very good technical condition Year of Make: 2001 Injection unit: Screw diameter: 60 mm Injection weight: 547 g Spray pressure: 1834 bar Dosing volume: 618 ccm Clamping unit: Clamping force: 275 t Spar spacing: 0x0 mm Size of the clamping plates: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-bar-less machine Hydraulic core pull x 3 Control with hot runners x 16 Hardened injection unit - Bimetal Machine has been regularly serviced by the authorized service Engel Dimensions: Weight: 20000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the tech ...
Key data: 1600 kN
Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimetal ...
Key data: 250 kN
Arburg 221KS 250-75 / Universal machine Year of Make: 1999 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Spray pressure: 2350 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 25 t Tiebar spacing: 221 mm Size of the clamping plates: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core train control Hardened injection unit - Bimetal Clamp for fastening the injection unit vertically Dimensions: Weight: 1150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pumps/motor: 5.5 kW Heating power: 4.6 kW Total power: 10.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to ...
Key data: 1800 kN
Engel Victory 200H/60W/180 combi / Production line with the Engel Viper 20 robot Year of Make: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Spray pressure: 2392 bar Dosing volume: 61 ccm Clamping unit: Clamping force: 180 t Spar spacing: 0x0 mm Size of the clamping plates: 1020x980 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced Injection Units - Bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter ...
Key data: 350 kN
Arburg 220M 350-90 Year of Make: 1997 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 1860 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Spar spacing: 221x221 mm Size of the clamping plates: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Perfect technical condition Operating hours: 19,000 hours The machine worked in a company that produced packaging for the food industry Dimensions: Weight: 1620 kg Length/Width/Height: 3.30x1.70x1.94 m Drive: Pumps/motor: 11 kW Heating power: 4.6 kW Total power: 15.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 2600 kN
Engel Victory 2460/260 Tech Ecodrive with the Engel Viper 20 robot / Hybrid machine / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2021 Injection unit: Screw diameter: 70 mm Injection weight: approx. 1100 g Spray pressure: 2000 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in perfect technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 10,000 in automatic mode Air Valve x 5 Hydraulic core pull x 2 on the side of the movable clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Injection unit is wear-resistant and resistant to corrosio ...
Key data: 350 kN
Arburg OK-C S350-60 / Vertical injection moulding machine with sliding table / Very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t Spar spacing: 0x0 mm Size of the clamping plates: 295x395 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Vertical Injection Molding Machine with Sliding Table 3 stations on the sliding table Air Valve x 4 Hydraulic core pull x 1 Control with hot runners Hardened injection unit - Bimetal Parallel movements Infrared protective curtains It is possible to change the screw diameter Dimensions: Weight: 2500 kg Length/Width/Height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before they are sold. It is ...
Key data: 2600 kN
Engel Victory 1350/260 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 55 mm Injection weight: approx. 590 g Spray pressure: 2183 bar Dosing volume: 618 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 8 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Ser ...
Key data: 400 kN
Arburg 680CB 400-170 / Vertical injection moulding machine, tie-bar-less / Very good technical condition Year of Make: 2012 Injection unit: Screw diameter: 25 mm Injection weight: 54 g Spray pressure: 2500 bar Dosing volume: 59 ccm Clamping unit : Clamping force: 40 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Vertical Injection Molding Machine, Tibar-less Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Control with hot runners x 12 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorised Arburg service provider Original Arburg tool crane Dimensions: Weight: 6500 kg Length/Width/Height: 1.9 ...
Key data: 3000 kN
Engel Victory 1560/300 Tech Ecodrive with the Engel Viper 20 robot / Hybrid machine / Operating hours: approx. 6,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 60 mm Injection weight: approx. 690 g Spray pressure: 2200 bar Dosing volume: 763 ccm Clamping unit: Clamping force: 300 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Operating hours: approx. 6,000 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air Valve x 3 Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 9 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Serv ...
Key data: 400 kN
Arburg 270C 400-70 Year of Make: 2007 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our compa ...
Key data: 3000 kN
Engel Victory 1350/300 Tech Ecodrive with the Sepro Industrial Robot SDR 22S robot / Hybrid machine / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2012 Injection unit: Screw diameter: 60 mm Injection weight: approx. 670 g Spray pressure: 1835 bar Dosing volume: 735 ccm Clamping unit: Clamping force: 300 t Spar spacing: 0x0 mm Size of the clamping plates: 1200x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Sepro Industrial Robot SDR 22S robot Machine in very good technical condition Operating hours: approx. 18,000 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inve ...
Key data: 500 kN
Arburg 320A 500-170 with the Sprue Picker / Electric Machine Year of Make: 2005 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Hardened injection unit - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Dimensions: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the sele ...
Key data: 400 kN
Arburg 270C 400-70 e² with the Arburg Multilift robot / hybrid machine Year of Make: 2016 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise injection Self-closing nozzle Arburg Multilift Select 6kg transverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes are driven by servo motors (electric); Axis B and C Traversing in ax ...
Key data: 500 kN
Arburg 320C 500-250 Year of Make: 2004 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Dimensions: Weight: 2330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 500 kN
Arburg 320C 500-100 / Excellent technical condition Year of manufacture: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2000 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: The machine is in excellent technical condition and has been used to test injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced Injection Units – Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Di ...
Key data: 500 kN
Arburg 370S 500-100 Year of manufacture: 10.2010 Injection unit: Screw diameter: 30 mm Injection weight: 65 g Spray pressure: 1390 bar Dosing volume: 71 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection The machine worked in a clean production Dimensions: Weight: 3300 kg Length/Width/Height: 3.48x1.46x2.03 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live tec ...
Key data: 500 kN
Arburg 320C 500-170 with the Wittmann W811 robot Year of manufacture: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of Make: 2010 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...
Key data: 500 kN
Arburg 370S 500-70 Year of manufacture: 08.2010 Injection unit: Screw diameter: 25 mm Injection weight: 40 g Spray pressure: 1550 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Possibility of adjusting the vertical injection unit with the help of special brackets It is possible to change the screw diameter to 22, 25 or 30 mm Dimensions: Weight: 3170 kg Length/Width/Height: 3.48x1.46x2.03 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machi ...
Key data: 500 kN
Arburg 320C 500-170 e² / Hybrid machine Year of Make: 2014 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air Valve x 2 Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m All offered machines are started by our service technicians before they are sold. It is possible to rec ...
Key data: 600 kN
Arburg 370C 600-100 Year of Make: 1995 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Spray pressure: 1550 bar Dosing volume: 70 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 370x370 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Air Valve x 1 Hydraulic core pull x 2 Dimensions: Weight: 3600 kg Length/Width/Height: 4.30x1.59x2.08 m Drive: Pumps/motor: 11 kW Heating capacity: 4.2 kW Total power: 15.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 600 kN
Arburg 320C 600-250 / Machine in very good technical condition Year of Make: 2001 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine has produced injection molded parts for the medical industry - pure production conditions Core train control Hardened injection unit - Bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/Width/Height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests ...
Key data: 600 kN
Arburg 370H 600-100 / Hybrid machine Year of manufacture: 11.2011 Injection unit: Screw diameter: 20 mm Injection weight: 29 g Spray pressure: 2500 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 1 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubrication Dimensions: Weight: 3190 kg Len ...
Key data: 600 kN
Arburg 370S 600-70 Year of Make: 2008 Injection unit: Screw diameter: 25 mm Injection weight: 40 g Spray pressure: 1550 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Built-in sorting flap Integrated original Arburg sprue picker on the side Possibility of adjusting the vertical injection unit with the help of special brackets It is possible to change the screw diameter to 22, 25 or 30 mm Dimensions: Weight: 3160 kg Length/Width/Height: 3.48x1.46x2.03 m All offered machines are started by our service technicians before they are sold. It is possible ...
Key data: 700 kN
Arburg 320K 700-250 with the Arburg Multilift H side robot Year of Make: 2005 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit : Clamping force: 70 t Tiebar spacing: 320x320 mm Size of the clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Air Valve x 3 Control with hot runners Hardened injection unit - Bimetal Central lubrication Dimensions: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On requ ...
Key data: 600 kN
Arburg 370H 600-290 with the Geiger MiniServo II sprue picker / hybrid machine Year of manufacture: 08.2014 Injection unit: Screw diameter: 30 mm Injection weight: 97 g Spray pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Production line with the Arburg Multilift Select robot and conveyor belt Electric machine: high-speed, energy-saving and very quiet Operating hours: 32,839 h in automatic mode Euromap 67 Euromap 12 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise inj ...
Key data: 700 kN
Arburg 320K 700-100 Year of Make: 2001 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Spray pressure: 1550 bar Dosing volume: 70 ccm Clamping unit : Clamping force: 70 t Tiebar spacing: 320x320 mm Size of the clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Hydraulic core pull x 1 Hardened injection unit - Bimetal Central lubrication Original Arburg mould crane, 2 lifting speeds, lifting capacity 100 kg Dimensions: Weight: 2170 kg Length/Width/Height: 2.94x1.45x1.99 m Drive: Pumps/motor: 11 kW Heating capacity: 4.9 kW Total power: 15.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. ...
Key data: 600 kN
Arburg 370E 600-170 with the Arburg Multilift Select robot / Electric machine Year of manufacture: 11.2017 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Production line with the Arburg Multilift Select robot and conveyor belt Electric machine: high-speed, energy-saving and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners x 24 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an i ...
Key data: 800 kN
Arburg 420C 800-250 with the Anvil+Langbein sprue picker Year of Make: 1999 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core train control Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On r ...
Key data: 800 kN
Arburg 420S 800-350 Year of Make: 2003 Injection unit: Screw diameter: 50 mm Injection weight: 250 g Spray pressure: approx. 1300 bar Dosing volume: 288 cc Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Integrated original Arburg sprue picker on the side Dimensions: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...
Key data: 800 kN
Arburg 1200T 800-150 / Vertical injection moulding machine with the rotary table Year of Make: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2500 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Air Valve x 6 Hydraulic core pull x 6 Control with hot runners Hardened injection unit - Bimetal Rotary table diameter: 1200 mm Kistler Sensor - Tool Pressure Control Machine has been serviced by the authorized service Arburg in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92x1.61x3.78 m Drive: Pumps/motor: 22 kW Heating capacity: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before they are sold. It is possibl ...
maximum number of results exceeded
please refine your search
