blow film line used for sale

Used bread roll line W&P, type: Rollprofi -In bakery condition- For cut rolls, smooth and round knitted, long rolled and double rolls. - 5 rows - 600 mm working width - Integrated dough divider and drum rounder, Multimatic - Pre-proofing time: 12 min - 6 min before long-distance taxiing station - 6 min between long roller and cutting station - Weight range:24-85 g - Output: max. 4,680 pcs. / h Visits and test runs are possible by arrangement.

Bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In good used condition- Compact bread roll line - Mini Rex Futura head machine - Proofer G 2000, SA2-ST2 - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - Condition: good, everything checked - Ready to use - Machine is still being cleaned - Head machine output: approx. 4,000 pcs./h - Capacity proofer: approx. 2,500 pcs./h The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

Complete dough line for the production of ciabatta, square bread and baguette Consisting of the higher-level production units: - Dough pre-portioner - Extruders - Dough sheet is formed - Flouring stations - Cutting roller for longitudinal cutting - Guillotine for cross-section - Dismissal - Length of the line: approx. 20 meters - Capacity: max. approx. 2,100 kg / h - Condition: Good, ready to use The facility has always received the service and is in good condition. Already dismantled and stored. Viewing is possible.

Preformed Bottle Filling, Capping, Labelling and Packing Line for 2-litre plastic containers (jugs/bottles) for fresh milk with screw cap closure. The line is equipped with integrated control systems and is suitable for hygienic operation., Scope of Supply:, 1. Filling and Capping Machine, - Integrated gravity filling and screw capping system., - Designed for CIP (Clean-in-Place) cleaning., - Fully enclosed construction with access doors., - Equipped with sterile air filtration system., - 32 filling valves and 10 capping heads., - Touchscreen operator control panel., - Cap feeding bunker with conveyor to capping unit., Manufacturer: Weightpack, Model: WFT 32.10.160, Serial Number: WL239, Year: 2008, Capacity: up to 7.000 containers per hour, 2. Leakage Testing Unit (Squeeze Tester), Designed to detect container leakage after filling., Manufacturer: Teledyne TapTone, Serial Number: E05-00 ...

The Waukesha Cherry-Burrell 015 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,054 liter per revolution. Maximum nominal capacity: 2,0 m3/h. Inlet / Outlet connection: 1-1/2. Maximum product pressure: 13,8 bar. Maximum pump speed: 700 rpm. The pump is used in a ice cream factory for product pumping. The current motor with this pump is 0,75 kW - 1,395 rpm - 380/420 ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

consisting of: automatic glass retraction, Fabr. HEGLA, Type: ISO, Ser No. 2033401055, glass washing and drying station, Fabr. LISEC, Type: VHW-F29/V8, YOC 2022, Ser-No. 315117/944, Glass transport station, Fabr. LISEC, Type: RTVB1527MZU2, Year 2019, Ser No. 383109341, visiting station, Fabr. LISEC, Type: RSV-38/27B, Year 2019, Ser No. 320-109338, Press Unit, Fabr. LISEC, Type: FPS-35/27U2, Year 2019, Ser-No. 343-109342, Frame Conveyor, Fabr. LISEC, Type: FR-400H, Year 2019, Ser-No. 550-109339, Dam system with sealing system, Fabr. LISEC, Type: VSL-10-27, Ser-No. 100170 with 2 stowage sections, dead weight: 4500 kg, as well as separate control/control cabinet system with cooling system, Fabr. RITTAL, control unit, dosing unit, pump and valve technology, max. working height of the system: 2700 mm

consisting of: 8 large shelves, Fabr. HEGLA, type: FLB, load capacity: 40,000 kg each, for lengths up to: 6,000 mm, tilting table/glass support, Fabr. HEGLA/HAGER, year 1988, Ser no. 0880342, Floatglasschneid- u. Brechtisch, Fabr. HEGLA, cutting bridge, Fabr. HEGLA, type: OPTIMAX 6032ES, built in 1996, Ser no. 6079, Net weight: 6,500 kg, Storage table, Table surface: approx. 3200x6000 mm, with operating terminal, PC tower, monitoring monitor, lattice enclosure and light barrier system

consisting of: tilting table, Fabr. HEGLA, type: ART6032, built in 2005, Ser no. E7662, net weight: 3,900 kg, surface layer unit, cutting table with cutting bridge, Fabr. HEGLA, type: VSG A46-MT, year 2003, Ser-No. 2118, footprint: approx. 3200x7000 mm, dead weight: 11,000 kg, max. working pressure: 6 bar, with control unit, lattice housing and light barrier system

Condition: Used Stock Number: 875B Marel Masterslice Type: TA1511 Marel Masterslice Serial number: 10090783 Marel Masterslice Year of construction: 2011 Marel Masterslice Outfeed conveyor 170 mm wide Marel Masterslice Dimensions: 2100 x 1000 x 1500 mm Marel Masterfill Type: TA1516 Marel Masterfill Year of construction 2011 Marel Masterfill Dimensions: 1000 x 750 x 1200 mm

Overview  This fully automatic packaging system for jars was built by Buhmann pac solutions System GmbH in 2016 and has been used very little, with only approx. 5,000 operating hours (of which approx. 2,000 hours were in pure production operation). The line includes a carton erector (wrap-around trays) and a packing unit and, in addition to packaging single-type cartons, also offers the option of automatically mixing offline products (mixed cartons). The system was regularly maintained by Buhmann & Yaskawa, with around €200,000 invested in maintenance and servicing between 2020 and 2024. The system is in very good condition and is available immediately. Technical details  Performance Product infeed online: max. 280 jars/min Format 3: max. 220 jars/min Mix type A: max. 140 jars/min (11.5 cartons/min) Mix type B: max. 140 jars/min (11.5 cartons/min) Total output: max. 350 jars/min or 3 ...

2018 Dr. Collin ZK 16 Twin-Screw Lab/Pilot Polymer Extrusion Line Overview Excellent opportunity to acquire a complete, high-quality laboratory/pilot extrusion line manufactured by Dr. Collin GmbH, an industry leader in R&D and polymer processing equipment. Built in 2018, this co-rotating twin-screw extrusion line (ZK 16 model) is specifically designed for processing plastic materials in small batches, making it ideal for research and development, testing, compounding, and new formulation development. Key Technical Specifications Manufacturer: Dr. Collin GmbH – Lab & Pilot Solutions Model: ZK 16 (Twin-Screw Extruder) Year of Manufacture: 2018 Condition: Used (Dismantled and ready for transport) Screw Diameter: ~16 mm (Co-rotating twin-screw) Power: 8 kW Voltage/Current: 400 V + N + PE / 15 A / 3~ 50 Hz Operating Pressures: Water: 4 bar / Compressed Air: 4 ...

CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location :, Use: Cheese Cooking, Stretching and Moulding

A complete Groninger bottle filling line is available. 1) Bottle unscrambler Groninger ZSB 2000, year of manufacture: 1995. 2) Filling machine Groninger DFV 1000Q, year of manufacture: 2013, filling stations: 10, additional function: transverse transfer system, output: approx. 9000/h, dosing range: 5ml-1000ml, container height range: 30mm-250mm, transport cup dimensions X/Y: 108mm/80mm, operating hours: approx. 24100h. 3) Cap sorter Groninger ZSK 1500, year of manufacture: 1995, sorting disc speed: 25rpm. 4) Capping machine Groninger KVK 106, year of manufacture: 1995, max. capping output: 9000/min, max. container diameter: 100mm, max. container height: 200mm, machine dimensions X/Y/Z: approx. 3400mm/1450mm/2550mm, weight: approx. 1500kg. 5) Discharge conveyor Groninger, year of manufacture: 1995. Documentation available. An on-site inspection is possible.

Overview  This complete PET water bottling line was manufactured on average in 2006 by European manufacturers including Siapi, Melegari S.p.A, P.E Srl, So.Te.Ma.Pack, Comag, TMG, Domino and Atlanta. The line will remain in production until the end of June 2025, offering the possibility to see it live in operation. All equipment is in very good working condition with complete maintenance history, making it an immediately operable turnkey solution. Technical data  Capacity: up to 6,800 b/h for 0.5L bottles, up to 6,000 b/h for 1.5L bottles Formats: 500ml PET, 1500ml PET Neck finish: 30/25 Packing: 500ml bottles: 24-pack shrink film 1.5L bottles: 6-pack shrink film Bottle diameters: 203mm (0.5L), 317mm (1.5L) Equipment condition: very good, complete maintenance history available Scope of Delivery Blow molding machine: Siapi EA4 Filling machine: Melegari S.p.A Fill Jet 20/20/4 Labeling mac ...

Line has got 2 throughfeed drilling machines Weeke 1st drill Weeke BST30/25, N? 0-259-05-3283-01-0810, 1992 Equipment: 2 x hor. Units, split drilling blocks, each with motor 1,8 kW, 13-spindle drilling blocks, centers 32 mm 6 x bottom unit, split drilling blocks, each with 1,8 kW motor vertical blocks swivelling 360? Min/max motor centerdistance: 160 - 576 mm Min drilling unit center distance: 192 mm Preselection for automatic cycles Panel sizes, length 250 up to 2500 mm, width 200 up to 800 mm, thickness 12 up to 40 mm 2nd drill Weeke BST30/25, N? 0-259-05-3284, 1992 Equipment: Machine prepared to take 2 horizontal units at later date 6 x bottom unit, split drilling blocks, each with 1,8 kW motor vertical blocks swivelling 360? Min/max motor centerdistance: 160 - 576 mm Min drilling unit center distance: 192 mm Preselection for automatic cycles Panel sizes, length 250 up to 2500 mm,  ...

machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 10 - 40 m/min Chain infeed taking 1,62 m. panels in front of the dogs Panel alignment at the infeed Middle support NC 30 controlls Equipment left and right: 1+1 Jump universal shaper 6 kW 1+1 Twin hogging unit, motors 6,6 kW (2 motors) 1+1 Universal shaper 6 kW 1+1 Jump universal shaper 6 kW panel turning device HOMAG TD 31/30/13 Year 1989 machine 2: Fixed side at the left, working width 220 mm to 3000 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 8 - 40 m/min Chain infeed taking ...

Wood production line manufactured in 2023. This ISM ATM-01 is a custom-made automatic production line designed for the fully automated manufacturing of wooden garden screens from individual planks. It features automatic discharge and stacking of finished screens, tilting stacks for efficient processing, and is adjustable for five different screen types. If you are looking to get high-quality wood processing capabilities, consider the ISM ATM-01 machine we have for sale. Contact us for further details.

Wood production line manufactured in 2017. This BURKLE Optima 1428/50 includes a continuous-action stack press with a pressing area of 1400 x 2800 mm and an automatic feeding system. It also features a robust panel rack and two tilting hoppers with a capacity of 1.5 m³. If you are looking to get high-quality door panel production capabilities, consider the BURKLE Optima 1428/50 machine we have for sale. Contact us for further details.

Discharge Power Supply HAUG Tatic Line EN SL LC Year 2009, S/N 01.7833.000, 230V 50-60Hz, Box

Wood production line manufactured in 2004. This CEFLA Spraybotic MD features an automatic spray arm with 4 spray heads and a pump station equipped with 5 Graco coating pumps. The passage width is approximately 1350 mm, making it suitable for various coating applications. If you are looking to get high-quality coating capabilities, consider the CEFLA Spraybotic MD machine we have for sale. Contact us for further details regarding this machine.

Used root vegetable washing and peeling line with a capacity of about 5 T/h The line includes: DRUM WASHER WITH ELECTRIC MOTOR. - TYPE LTJ-840 DL.3600,WIDTH 1100,H.1950, Manufacturer: GATINEAU FRANCE, Year: 1980 Flat conveyor SCREW POWER PEELER WITH MOTOR. ELECTR. - TYPE YAI1056 BE A6/1 DL.5200, Manufacturer: GATINEAU FRANCE Year: 1980 STEAM PEELER WITH MOTOR. ELECTR. - TYPE PVR-900L DL.3000,WIDTH 2000,HEIGHT 5750, Manufacturer: GATINEAN FRANCE Year: 1980 OUTPUT SCREW WITH PEELER WITH ELECTRIC MOTOR - TYPE YAI 1056 BEA4/1 DL.7500, Manufacturer: GATINEAU FRANCE Year: 1980 Brush wipes 2pcs Inspection Conveyor

Qty. 1 Second-hand Hot Rolling Mill Line Manufacturer: NKMZ Built: 1972 Roll Force: 2300 T (Periphery roll speed)Mill Speed: 0-24-210 m/min. Slab Thickness: 300-350 mm Width: 740-1540 mm Length: 1100-3000 mm Slab Weight: 1-2.7 T Slab Temperature: 370 – 550 °C Rolled Thickness: 8-200 mm Width: 750-1550 mm Plate Length: 2000-8000 mm Coiled Thickness: 6 – 12 mm Coiled Width: 700-1550 mm Coil I.D./O.D.: 750/1400 mm Coiling Temperature: 300-350 °C Back-up Rolls Dia.: 1500 – 1400 mm Work Rolls Dia.: 800 – 760 mm Roll Barrel Length: 1800 mm

Input line L 6200mmxW385mmxH920mm; Output line L12200mmxB1280mmxH950mm; push-off unit L1450mmxB1800mmxH650mm Auction-ID: A1-43429-28

Equipped with: (1x) Makor TEP 2500 (350 kg) feed belt, (1x) Makor TEP 2000 (320 kg) feed belt, (1x) Ricambi RO135035 belt sander (2022), (1x) Tecnolegno N200/P belt sander and (1x) Tecnolegno N90/S belt sander, (1x) Makor double-sided polisher, (2x) control box (1200x600x1900 mm). With flexible extraction pipes Auction-ID: A1-43429-6

Input length 150-1000 mm; wood width 40-150 mm; wood thickness 15-100 mm; Press length 3300-6500 mm. compartment entry type BF 4-600/1500; input station ESTA-600/1000; Milling station CP-205/00/1000; Graco adhesive application system; gears and three-phase motor UKS 240/600/1000; infeed chain transport EKK 240/600/1000; VE 205 feed-through system; press Conti A-20/6500; chain transport; with milling tools; Test equipment and accessories Auction-ID: A1-43429-81

Auction-ID: A7-46302-1

Wood length 600 cm including chain transport; tilter; chain transport with sorting key; stacker with elevator; stacking slats warehouse; Total set-up Dimensions approx. 22 x 10 meters; Roller conveyor length 13 mtr Auction-ID: A1-43429-87

APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and  ...

Overview This packaging line for repacking glass bottles into carriers, trays, cartons and dollies was produced between 2002 and 2016 by several European manufacturers such as Yaskawa, Profipack, DokuConsult KG and Krones. The line is currently still in operation until June 2025 and was specially designed for repacking 0.33L and 0.5L glass bottles into 6-bottle carriers (open baskets), returnable trays and various pallet types (Euro dolly, Euro pallet). It enables both the unloading and loading of full and empty containers into new packaging units. The system will be available from June 2025, as soon as it is decommissioned. Technical details  Output: up to 9,000 bottles per hour Formats processed: 0.5L NRW returnable bottles (brown) 0.33L non-returnable bottles (green and brown) 6 open basket carriers (2x3) for 0.5L and 0.33L Euro dolly: 400 x 600 x 1,600 mm Euro pallet: 1,200 x 800 x  ...

Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1

Pastry line, Fabr. Rondo, Compactline conveyor belt width 640, total length 7,000 mmStainless steel version, mobile

Festo - DGC-63-800-KF-YSRW-A - linear cylinder 1x Auction-ID: A1-46070-160

Siemens - Batch of linear motor parts & motor unit Auction-ID: A1-46070-340

LDK / Hiwin / Jama - Batch of rod ends, linear bearings and bearings 329KG Auction-ID: A1-46070-170

Festo - DGC-63-700-KF-YSRW-A - linear drive 1x Auction-ID: A1-46070-265

Festo - DGC-63-750-KF-YSRW-A - linear drive 1x Auction-ID: A1-46070-90

Festo - DGC-63-650-KF-YSRW-A - linear cylinder 1x Condition: unused Auction-ID: A1-46070-252

Lot of linear guides & ball screws 97KG Auction-ID: A1-46070-219

Batch of parts mix (including Siemens SIMOTICS/SIMATIC) Weight: 126KG net Auction-ID: A1-46070-330

Festo - DGC-63-850-KF-YSRW-A - linear drive 1x Auction-ID: A1-46070-211

Schneider Electric - Multi 9, Altira, Linergy - Batch of electrical components Condition: unused Auction-ID: A1-46070-306

MTK+, ISB, HIWIN - Batch of industrial bearings and linear components Auction-ID: A1-46070-234

SKF, FAG and INA - Batch bearings and linear technology 225KG Auction-ID: A1-46070-346

Batch of Rexroth linear guides / aluminium profiles – various lengths Weight: 156KG net Auction-ID: A1-46070-37

Siemens - Lot SINUMERIK Operator Panels & SINAMICS Smart Line Modules 2x 6FC5303-0AF22-1AA1 5x 6SL3130-6AE21-0AA0 Auction-ID: A1-46070-204

Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as  ...

B+S/Dividella/Mettler-Toledo Garvens/Pester labelling & packing line for ampoules and vials comprising Bausch + Ströbel ESA 1025 high output self-adhesive labeling machine suitable for ampoules and vials, object diameter up to 36 mm, object height up to 140 mm, output up to 30,000 labels per hour, includes Allen hot foil coder, machine net weight approx. 1140 kg, Dividella NeoTop 904 topload cartoner with partition for ampoules and vials, format range min. 60 x 45 x 17 mm (LxWxH), max. 150 x 150 x 32 mm (LxWxH), capacity up to 900 objects/min. and 90 packs/min., Robatech hot glue unit, RonTech booklet-feeder, GUK leaflet folder from stack, Mettler-Toledo Garvens XS 2 MV checkweigher, max. 600 g, d = 0,1 g, T = -540 g, Pester PEWO-pack 250 compact stretchwrapper for folding cartons, etc maximum film width 250 mm, maximum format range 180 x 400 x 200 mm, capacity up to 60 bundles per minu ...

\" Vogel Digi Plus-Line Digital dial gauge 0–100 mm / 0.01 mm Digital dial gauge from Vogel Germany from the Digi Plus-Line with a measuring range of 0–100 mm and a resolution of 0.01 mm. • Measuring range: 0–100 mm • Resolution: 0.01 mm • Display: digital LCD, 6-digit • Switching: mm/inch • Series: Digi Plus-Line • Manufacturer: Vogel Germany • Order number: VG240213 \" Auction-ID: A7-46417-236