blow film line used for sale

FERAG wire stitching machine Year: 2008 Binding block format V1 Gross: min 152 × 217 – max315 × 340 Net: min 148 × 210 – max 300 × 332 Insert for feeder station Min 110 × 95 – max 315 × 340 Gluing of sheets only – no blocks Net format: min 55 × 85 – max 280 × 200 min 85 × 55 Advertising sleeves and folded inserts with one fold must be tested. Number of insert feeders 8 Number of glued-sheet feeders 1 Maximum block thickness 5 mm Insert pre-fold 8 to 12 mm – back pre-fold only Insert without pre-fold Possible, but not across the entire format range Double production Cutting in the machine not allowed Trimming Head and foot trimming 3.5 – 50 mm Side trimming 3.5 – 50 mm Landscape format cannot be trimmed on the three-knife trimmer, which differs structurally from saddle stitchers and wire stitchers. Staples Number of standard stitching sta ...

This 5-axis DMG ULTRASONIC 50-5 Linear was manufactured in 2010. It features a traverse range of 500 mm in the X-axis, 450 mm in the Y-axis, and 400 mm in the Z-axis. The machine is equipped with a USB 1818 hybrid spindle, offering speeds from 200 to 18,000 rpm for both ultrasonic hard machining and milling. If you are looking to get high-quality machining capabilities, consider the DMG ULTRASONIC 50-5 Linear universal machining centre we have for sale. Contact us for further details.

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

Used machine Universal Machining Center Machine type: DMG DMF 360 / 11 linear Control: Heidenhain TNC 640 Celos Year of Make: 2017 TECHNICAL DATA: Travels: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Dynamic Pack for DMF 360 linear (Y1100) Rapid traverse: (X/Y/Z) [m/min.] 80 / 60 / 60 Speed range: [1/min.] 20 - 15,000 Drive power: [kW] 46 / 30 Tool holder: SK 40 Tool Changer Tool positions: 60 NC rotary table Table size: [mm] 3,200 x 1,100 Max. table load: [kg] 1,200 Features: Internal cooling (IKZ): [bar] 40 Coolant tank: [l] 600 Chip conveyor Chip rinsing gun Oil mist extraction Air through spindle center Probe Spindle Preparation for use 3D quickSet Automatic doors Electronic handwheel This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of Make: 2008 TECHNICAL DATA: Travels: X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 560 Feed: (X/Y/Z) [m/min.] 90 Rapid Traverse: (X/Y/Z) [m/min.] 90 / 90 / 90 A-axis -10 B-axis +110 C-axis 360° Speed range: [1/min.] 28,000 Tool Changer Tool holder: HSK-A63 Tool positions: 60 Tool diameter: [mm] 80 / 140 Tool length: [mm] 300 NC rotary table Ø 750 Max. table load: [kg] 800 Table size: [mm] fixed tabe: 950 x 650 Max. table load: [kg] 1,000 Features: Chip conveyor This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine HSC70 linear Machine Type: CNC 5-Axis Milling Center Model: HSC70 linear Manufacturer: DECKEL MAHO Control:3D control Heidenhain TNC 640 Year of Make: 2016 #001347 Equipment: - Spindle speed up to 28,000 rpm - Production package 980I with ICZ and temperature control 01 - Rinsing gun for swarf rinsing - Electronic handwheel - Tropical Pack This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Manufacturer DMG Model DMU 50 eVo linear Year 2008 3D CNC control HEIDENHAIN iTNC 530 Table NC Rotary Table INCLUDED Table surface 500×380 mm. Maximum weight on table 500 kg Table rotation (C-axis) 0.001º (±360º) Oscillation field (B-axis) 108º Direct Measurement System INCLUDED Routes and advances Longitudinal travel (X-axis) 500 mm Cross travel (Y-axis) 450 mm Vertical travel (Z-axis): 400 mm X-axis fast feed 80,000 mm/min Fast forward Y-axis, Z 50,000 mm/min Fast forward B, C axes 18,000 mm/min Number of Controlled Axles 5 Head Head speed 18,000 r.p.m. BT-40 Head Cone Main Motor Power 30 kW Equipment Automatic tool loader INCLUDED No. of positions in tool loader 30 Internal cooling 40 Bar INCLUDED Coolant tank with paper filter INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel Others Total installed power 52 kVA Machin ...

Automatic desiccant cap assembly line (silica gel). Equipped with a dual-lane system and a multi-position rotary carousel, featuring cardboard punching units, volumetric dosing, plastic seal insertion, and quality control by machine vision and dynamic weighing. Year 2012. In good condition.

more information on request

Automatic Textile Printing Machine Type: VERSATRONIC S-line Manufacturer: Hebbecker Year: 2022 Configuration: 8 stations/pallets 6 printing heads Maximum print area: 400 x 450 mm Pallet drive: frequency-controlled AC servo drive Squeegee-drive system: AC servo high-precision drive 4-cylinder POWER-Squeegee system Main Control Unit: Rotatable control panel with 7” SMART touch display Microprocessor with diagnostic program Printing Programs: 6 standard printing programs High-density program MULTIFLASH program Cool-stop mode Sampling program Start-up/finishing program Screen-Cleaning mode, stopping pallets between print stations Free-wheel-mode Accessories 8 pcs aluminum sandwich pallets 420 x 500 mm with neck 8 pcs aluminum sandwich pallets 320 x 500 mm with neck 8 pcs aluminum sandwich pallets 230 x 500 mm with neck 8 pcs aluminum sandwich pallets 130 x 500 mm ...

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: CELOS X with HEIDENHAIN TNC7 Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools60 Working area 1Longitudinal450 mmCross580 mmVertical460 mmSpecial equipmentFischer spindle 40,000 rpm with wave cooling 5-axis design Tool magazine 60 places HSK-E50 Production package high chip volume with IKZ (chip conveyor, rinsing gun, rotating viewing panel, AR flushing, IKZ 40 bar/600 1) Oil Mist Separator AFS BlowinSpecial equipmentPreparation aut ...

General SKU300P642 LocationBarneveld MakeElsto TypeC313F P71 No.735004 Main Features MaterialStainless steel Surface0.49 m2 Specified Features - Screen filter Sieve filterScreen filter Sieve sizesDia. 250mm InletDN55 OutletDN40 Capacity0,49m2 Motor0,15 kW, 400 V., 630/760 rpm MaterialStainless steel With jacketcheck General Year of construction2007 Floor space1,3x1,2 M Total height1,8 M Weight180 KgScreen filters-Filters > Screen filtersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Heuft Inspector for 0.5l Euro 0.5l Bracket 0.33l Longleg Bottle Machine can be scheduled by us and bottle run can be adjusted.

travel -x axis: 500 mm travel -y axis: 450 mm travel -z axis: 400 mm c-axis: 360 b-axis: 0 - 108 ° surface area: d: 500 x 380 mm control: HEIDENHAIN - iTNC530 number of spindle speeds: 20 - 18.000 U/min numbers of positions in the tool changer: 60 tool taper: HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU50Evo | DMU50 Evo | 50Evo The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the spind ...

An optical inspection machine Göpel for the inspection of THT components, THT solder joints and wave-soldered SMD components is available. Component clearance: 120mm, max. component height top/bottom: 80mm/10mm, max. inspection dimensions X/Y: 540mm/450mm, max. workpiece dimensions X/Y: 620mm/510mm, inspection speed: approx. 100cm²/s, machine dimensions X/Y/Z: approx. 1200mm/1400mm/1800mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.

Key data: 750 mm, 600 mm, 520 mm

CNC 5-Axis HSC Vertical Machining Center DMG DMU 70 eVo Linear NEW DESIGN Year of construction: 2011 Heidenhain iTNC 530 2-axis NC swivel rotary table Table size Ø 700 x 500 mm Table load max. 350 kg C-axis rotation 360° x 0.001° Swivel axis B-axis 120° x 0.001° X 750 mm Y 600 mm Z 520 mm Spindle drive motor 25/35 kW Spindle speeds max. 18,000 rpm. 60-fold tool magazine positions Tool holder HSK-A63 Electrified tour of the factory Offer number MV-6513

travel -x axis: 3.000 mm travel -y axis: 560 mm travel -z axis: 720 mm control: Siemens - 840D number of spindle speeds: 18.000 U/min numbers of positions in the tool changer: 100 tool taper: HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 3.000 mm travel -y axis: 560 mm travel -z axis: 720 mm control: Siemens - 840D number of spindle speeds: 18.000 U/min numbers of positions in the tool changer: 100 tool taper: HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diosna Linear Transport Kneading Machine Spiral Kneader W401A - the LT system consists of - 2 pcs spiral mixer W 401 A - with 8 boilers - With 1 lifting tipper

To mediate on behalf of the customer. Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32 Manufacturer: Gildemeister Control: Fanuc 160iB First commissioning: 2003 #009328 Location: Poland Control Fanuc 160i-B Turning length 120 mm Turning diameter 32 mm Number of axes 8 Travel X1 axis 65 mm Travel Y1 axis 350 mm Travel Z1 axis 120 mm Travel X2 axis 265 mm Travel Y2 axis 235 mm Travel Z2 axis 320 mm C1-axis travel 360° Travel C2 axis 360° Spindle bore 42 mm Spindle speed 8000 rpm Motor power 7.5 kW Total power requirement 34 kVA Dimensions L 4900 x W 1630 x H 1920 mm Weight 4350 kg The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details.

This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details.

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabinDMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampiTool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard)Number of tools 150Preparation measuring probe TS640 ...

Velati Salami Line existing • Grinder BBTMR 220 • Salt-Band/Spice • Vacuum paddle mash EEC1 • Year 1999

General SKU309X465 MakeHaagen &: Rinau TypeUnimix No.300975/2290 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vessel3x Capacity3320 l.(2000 l.)/ 2885 l.(1600 l.) /1445 l. (1200 l.) Dished bottomcheck Slope bottomcheck Dished top sidecheck Flat top sidecheck With covercheck ManholeDN400 Top connectionscheck With jacket2x volume 400 l., 165 l. and 95 l. Max. temperature151°C With anchor stirrercheck With paddle stirrercheck With dissolver stirrercheck Motor18kW, 1450 rpm (EX) With homogenisercheck Motor30kW, 2950rpm (EX) MaterialStainless steel 1.4541 (321) With jacketcheck General LocationBarneveld With switchgear( as is) Floorspace7x2,5 m Total heig ...

Manufacturer: OPS-Ingersol Model: EAGLE-V5 Precision-Line Year of Manufacture: 2025 Type of Machine : Milling Machine with Multi Change Automation Condition: Used.Ready for operation, connected to power Travel Distances - X axis: 550 mm - Y axis: 400 mm - Z axis: 400 mm Rotary Table - Swivel/rotary table with torque drives Spindle - Spindle type: HF spindle HSK-E40 with DDF by Fischer - Spindle speed: 1 to 42,000 rpm - Spindle power: 15 kW - Torque S6 (60%): 6.7 Nm Tool Magazine and Control - Tool magazine capacity: 100 positions - Control: Heidenhain - Weight: 8,500 kg Extra Accessories can be negotiated into the offer. - 20x Erowa ITS 148 Palette Type G with clamping studs for automation - 13x HSK E40 shrink fit chuck d3 by Haimer - 28x HSK E40 shrink fit chuck d4 by Haimer - 14x HSK E40 shrink fit chuck d5 by Haimer Find more here - / Contact us at -

CNC unit for boring and routing Brand: Atemag Type: Function Line Quattro With four tool interfaces 2x boring / 2x routing Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 25, ER 32

Multispindle drilling head unit for cnc working centres Make: ATEMAG Multispindle drilling head for economical drilling of numerous holes or complex hole patterns in just one machining stroke. Max. drive speed: 10.000 Rpm Max. tool spindle speed: 10.000 Rpm Gear ratio i= 1:1 Torque: max 1-5 Nm Number of tool output: on request

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Mono With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type MONO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type DUO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm

CNC unit for boring, routing and sawing Brand: Atemag Type: Vario Classic With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 3600 mm   space requirements -front/back-: 1500 mm   total height: 2800 mm   total weight approx.: 2000 kg never used (NEW) ! - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Dimensions: max. 300 mm x 250 mm x 210 mm Weight:  ...

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Vario Viso With adjustable angle 0 - 100° Max. drive speed 15,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm Version with one single clamping screw, locking with the lever

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch Pro With surface copying function with floating bell GX1 or GX2 or GX4 Max. drive speed 18,000 R.P.M Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 20 Nm Tool interface: modular for ER 25, ER 32, saw flange, shrink- fit chuck

CNC unit for boring and routing Brand: Atemag Type: Function Line Extra with two tool interfaces angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 32 / ER 16 Spindle for omega router/ ER 16

CNC unit for corner notching in off-set design Brand: Atemag Type: Function Line Extra 2 Max drive speed 8,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1,48 Turning direction left/right Torque max. 20 Nm Tool interface: Special Attention: price is just valid for standard version

- Touch Screen Monitor - Autotrim - Air table - Side air tables, left / right - Air corners - Lift LW 1000-4, 2000 - Jogger RA-4, 2006 mit Waage - Transomat TR130EL-4, 2008 - Spare knife

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Vario Viso Angle adjustment 2 x 0 - 100° on two sides adjustable Max. drive speed 13.760 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,09 Turning direction left/right Torque max. 22 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm, Pitch circle 45mm and 52mm

Krones Wet Aseptic PET Bottle Filling Line – 36,000 bph (500 ml) The Krones wet aseptic filling line is designed for the production of carbonated and still beverages, including soft drinks and juices, using a wet aseptic process. The line supports flexible bottle formats of 0.33 L, 0.5 L, 1.0 L, and 1.5 L, with a maximum output of 36,000 bottles per hour at the 0.5 L format. The system is compatible with 28 mm closures, including PCO 1810 flat caps and sport caps, ensuring high hygiene standards and reliable, high-quality filling performance. The line is complete and was originally installed by Krones in 2009. In 2016, the line was upgraded with a KHS Blowmax stretch blow molder and a Krones Modulpal palletizer. The line has been continuously serviced by Krones and is currently in very good condition. Main Characteristics: Manufacturer Krones AG and KHS Manufacturing yea ...

CNC unit for moulding or saw blade package Brand: Atemag Type: Ultra Line Mega Cutter Position of tool spindle 90° Max. drive speed 12,000 R.P.M. Max. tool spindle speed 7.690 R.P.M. Gear ratio i = 1:0,641 Turning direction left/right Torque max. 22 Nm Tool interfaces: arbour with 30mm diameter, 120 clamping length, max. tool diameter 160mm - without tools -

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

Non Returnable High-Speed Glass Bottle Beer Filling & Packaging Line General Overview High-capacity and fully integrated beer bottling and packaging line designed for efficient processing of multiple glass bottle formats and packaging configurations. The line combines advanced automation, hygienic construction, and world-class machinery from leading manufacturers to ensure maximum performance, flexibility, and reliability. Key Production Capacities Nominal Speed (Bottles per Hour) 25 cl: 40,000 bottles/hour 33 cl: 35,000 bottles/hour 50 cl: 30,000 bottles/hour Bottle Formats 25 cl 30 cl 33 cl 50 cl Packaging Formats 25 cl Formats 4 x 6 x 25 cl 1 x 12 x 25 cl 24 x 25 cl 30 cl Formats 24 x 30 cl 33 cl Formats 4 x 6 x 33 cl 6 x 4 x 33 cl 1 x 12 x 33 cl 24 x 33 cl 50 cl Formats 20 x 50 cl Line Characteristics & Features Design & Engineering Transparent See Th ...

CNC Swiss lathe GILDEMEISTER SPRINT 20/8 linear With Fanuc 31i controller Year of Make: 2016 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range : max. 10000 rpm Stroke Z1: 80 mm SUB-SPINDLE Turning diameter: max. 20 mm Stroke Z 2 : 300 mm Speed: max. 10000 rpm SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 350 mm 6 Pos. Tool Holder 12 x 12 5 rotating tools including spindles with clamp holder ESX 16 SLIDE 2 Stroke x 2 : 240 mm 4 position tool holder for external machining with connection 12 x 12 4 position tool holder for internal machining diameter 20 mm 5 rotating tools including spindles with clamp holder ESX 16 6 + 2 axes, 2 Y axes as standard Linear actuator for maximum precision With the following accessories: Full protection cab with interior lighting Various tool holders C axis for main and counter spindle Bar Feeder L ...

cutting diameter: 230 mm cutting speed: 35 - 70 m/min cutting width: 260 x 200 mm : mm saw band length: 2720 x 27 x 0,9 mm total power requirement: 1,1 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1,8 x 1,8 x 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Gildemeister Model: GMX 400 linear Year of Manufacture: 2007 Total Power Requirement: 100 kVA Voltage: 400 V Machine Weight: 24,000 kg Floor Space Required: 60 m2 Working Range - Centre height: 1,343 mm - Maximum turning diameter: 640 mm - Maximum turning length: 1,930 mm - Maximum turning length over bed: 550 / 180 mm - Slide travel longitudinal X1, X2: 1,585 / 1,400 / 1,500 mm - Slide travel vertical Y: plus/minus 110 mm - B-axis: plus/minus 120 degrees - Maximum circumference: 640 mm - Length of workpiece in crown area: not specified - Maximum workpiece weight: not specified Spindle Specifications - Spindle head flat flange DIN: Flachflansch - Spindle nose diameter front bearing: 220h5 mm - Spindle bore diameter: 107 mm - Spindle nose diameter: 150 mm - Max. chuck bore diameter in front bearing: 250 / 315 / 400 mm (internal taper) - Spindle speed HSP: 3,200 / 4 ...

This is a stainless steel construction compact pita line by SalTek Bakery Equipment. It makes the thin Lebanese pita bread and the slightly thicker Egyptian pita bread. It comes with its stainless steel hood with make-up air unit. Line includes dough divider, 1st proofer, sheeter, 2nd proofer, oven, hood, make-ap air unit, cooling conveyor. Can provide help with start up of the line.