135,187 used machines on RESALE, but how to find them? Machine Search
Blower/fan Buehler design GR 360 degrees 240 m³/min, 210 mm water column Power 11 kw V-belt drive Output 455 x 355 mm Suction 450 mm Good condition, test run in our specialist workshop
Souffleuse KAUTEX H10-3 S80 2D/3D Diamètre vis : 140 mm ?Machine retrofitée en 2005
Older, but powerful MIAG fan type GL360° 106 m³ /min 730 mm water column 22 kw V-belt drive Suction ø 329 mm In: Transition ø 400 mm with air flap From: 280 x 210 mm Transition ø 400 mm Maintenance and test run carried out in our specialist workshop
Fan / blower from ABB Solyvent-Ventec design 90 degrees m³/min 367 mm Water column 800 Power kw 75 Suction diameter 550 mm Output 480 x 360 mm Good condition, test run carried out
Fan / blower CARTER Howden design Gr360° m³/min 250 mm WS 160 Fan wheel ø 550 x140 mm 11 kw V-belt drive, n= 2400 rpm, , From 500 x 440 mm
Bottle blowing machine from Sidel type SB 012 ROUE. Capacity up to 15,000 bottles/h. Year of manufacture 2001.
PROCREA INJECTION BLOW MACHINE TYPE : Rev 100 This PROCREA REV 100 injection blow molding machine can produce fully finished, waste-free hollow containers, similar to injection molding, using various plastics. It features fully automatic cycles, with capacities ranging from 5 cc to 750 cc and weights from 5 g to 100 g. This machine is designed to work with molds of 1 to 4 cavities, and its high production rate is achieved thanks to the turret system, which performs all injection, blow molding, and finished part ejection operations in a single step. Mold construction for the Rev 100 is very simple thanks to the automatic extraction system applied to the turret.
Two-station machine for containers up to 5 ltr. With double head 180 mm center to center. 2 extruders - one for each side. With integrated leak tester, mill with feed belts, bottle belt. Material feeder and mixer.
The blow moulding stations are new and have never been used.
BEKUM BA52 Blow Molding machine Type : BA 52 / S 801 Year: 1993 1 station Clamping force : 450 kN Original BEKUM control Extruder type : S 701 Refurbished 6-liter head with accumulator Head and screws reconstructed Max.bottle volume: 60 Litres Mold dimensions (L x W x H): 1200/750/2 x 150-300 (mm)
material width: 0300 mm material thickness: 2,50 mm no. of straightening rolls: 11 feed rolls: 2 exit pinch rolls: 2 diam. of the rolls ca.: 60 mm straightening speed: 5 - 30 mm/min sheet thickness - min.: 0,40 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Features: • All upper rollers manually adjustable • All lower rollers interconnected via gears • Speed manually adjustable via handwheel • Strip guide at the infeed • Roller basket at the outfeed • Sensor arm for loop control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BEKUM BA 200 Blow Molding Extrusion Machine Type: BA 200/ S123 Year: 1990 8L Accumulator Head 1 Head and 1 Station Material Processed: PE Production Capacity: 500 kg/h Extruder Type: Accumulator Number of Extruders: 1 Screw Diameter: 120 mm L/D Ratio: 24 Thickness Control: Yes Material Feed Opening Stroke: 710 mm Clamping Force: 800 kN There are 2 machines
PET BLOW MOLDING - MAG PLASTIC - Blow molding solution for PET bottles Year: 1994 Type: SSB 40 Input voltage: balanced three-phase 400 V Frequency: 50 or 60 Hz +- 5% Total installed power: 86 kW (Option 102 kW) Weight: Approx. 5,000 kg Number of molds: 4 Clamping force: 250 KN Total opening stroke: 120 mm
Machine Type: PB1E/S E42/24 (Electric) Year: 2008 Extruder Screw Diameter: 42mm Screw L/D Ratio: 24 Capacity : 1L Extruder Motor Power: 22kW Extruder Heater Power: 4.1kW Heating Zones on Plasticizing Cylinder: 3 Extruder Cooling Fans: 2 Plasticizing Capacity with PE: 24kg/h Plasticizing Capacity with BFPE: 26kg/h Working hours : 8000h Simple station Double head with 100 mm center distance. (2 x 500ml)
PLASTIBLOW Machine type: PB1E/D E60/25 (Electric) Year: 2007 Extruder screw diameter: 60mm Screw L/D ratio: 25 Molds: 2 Stroke: 260mm Clamping force: 35 Capacity : 3L Extruder motor power: 30kW Extruder heater power: 9.6kW Heating zones on laminating cylinder: 4 Extruder cooling fans: 3 Laminating capacity with PE: 58kg/h Laminating capacity with BFPE: 75kg/h Working hours : 24,000h Double station Dual head with 100mm center distance. Head modified from the original (3 heads with 85mm center distance => 2 heads with 100mm center distance) in 2021.
Rotary Lobe Blower High Vacuum Blower Unused Manufacturer: Aerzener Maschinenfabrik GmbH Type: GLB 17.14 Year: 1977 Volume flow: 100 m³/min P1: 1.0 atü (bar) P2: 0.5 atm (bar) ΔH: 5 mWS (0.5 bar) at 100 kW and 890 rpm Dimensions approx. 1500 x 1000 x 1100 mm Areas of application: central dust extraction, vacuum coating, packaging industry, chemical processes, steel degassing Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Krones Contiform S 12 with 12 cavities Capacity: approx. 18.000 bottles/hour on 2,0 litre bottles Year of manufacturing: 2006 Operating hours: only approx. 38.000 hours Including Gardner Denver Belliss & Morcom compressor WH29H3N with dryer and air receiver Bottle neck finish: 1881 The machine is currently still in production and will run until August 2026 Dismantling and removal must take place at the beginning of September 2026 Location: United Kingdom
Speed: 8.000 bph with 0,5 liter bottle. Different formats are possible optionaly. Dismanteling is made by Seegräber GmbH on begining februar 2018. List of machines included: -SIDEL SBO 6 Blowing machine. Completly overhault by SIDEL in 2006. -Preform magazin and preform elevator Compressor, cooling, moulds not included
Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: Aertenica 1.5 kW 1360 rpm -Fan wheel: Ø 235 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 215 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg
Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Aertenica Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: 1.5 kW 1360 rpm -Fan wheel: Ø 225 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 200 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg
ASB 50MB V2 injection blow molding machine Year : 2005 Working hours : 59 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. It has a completely new pump motor and pump. + auxiliary equipments
ASB 50MB V2 injection blow molding machine Year : 2006 Working hours : 30 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. The pumps have been replaced with new ones. + auxiliary equipments
Blowing machine Kosme KSB 4000 year of manufacturing: 2003 capacity: 4.700 bph incl. preform feeding system neck type: PCO 1810 The machine is out of production since October 2025 and it is already dismantled:
material width: 1650 mm material thickness: 3,00 mm no. of straightening rolls: 21 Control: sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 50 mm between stands ca.: 1720 mm run-in height: 1250 mm total power requirement: 45 kW weight of the machine ca.: 24,50 t dimensions of the machine ca.: m 6-HIGH LEVELER / Strip Leveler / with Quick-Change System - 18 Back-up Supports - Digital Roll Adjustment (0.01 mm resolution) - Gearbox renewed in 2021 - Quick-Change System The quick-change system is mounted on a sliding plate. This sliding plate—on which the leveling rolls as well as the entire back-up support assembly are mounted—can be extended, allowing for quick and easy roll replacement in an easily accessible position. The extension and retraction of the sliding plate are hydraulically actuated. Connection to the drive mechanism is automatic. - Intermediate Rolls The intermed ...
The Florin Mini Compact Dryer is a compact drying system for applications where residual moisture must be removed or products must be blown off specifically. The system was developed as an energy-efficient alternative to classic compressed-air blow-offs and operates without a compressed-air supply., Typical application areas are blowing off coded surfaces before labeling, removal of residual moisture after washing or filling processes, drying of closures, cap feeding, and ejection of empty bottles. The compact design allows the system to be integrated into existing production lines even in confined spaces., With a power consumption of up to 180 watts and an air flow rate of 52 m³/h, the Mini Compact Dryer offers an energy-efficient solution for numerous applications in the beverage, food, and packaging industries. The IP67 protection rating enables use in demanding production environmen ...
centrifugal blower, centrifugal fan, centrifugal fan, centrifugal fan used Manufacturer: EUROVENTILATORI SPA Type: TRC 1251 RDO ES12 Volume flow: 23724 m³/h at 15° / 71208 m³/h at 85° Pressure: 6207 Pa at 15° / 2675 Pa at 85° Diameter approx. 1800 mm Inlet approx. 800 mm Outlet: approx. 800 x 600 mm Explosion-proof: ATEX 94/9/EC ExII 2D c T125 90 kW 1429 rpm 400/690 V Dimensions: approx. 3000 x 2000 x 2300 mm All items are checked for function before delivery, if technically possible! Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
We always have a large number of blowers and fans in stock centrifugal blower, centrifugal fan, centrifugal fan, centrifugal fan used Manufacturer BERLINER LUFT Type: RE 71 710-1-D Volume flow: 12100 m³/h Diameter approx. 800 mm Inlet approx. 500 mm Outlet: approx. 450 x 450 mm 7.5 kW 1450 rpm 380/660 V Dimensions: approx. 1500 x 1200 x 1550 mm All items are checked for function before delivery, if technically possible! Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Brand: UNILOY MILACRON Model: UMA 12 SH EZ SECO2 3D Suction Blow Molding Machine , Automotive air ducts / conduits production. (video available). Year: 2010 Materials used: PP, PP-EPDM, TPC Machine time under power (h): 22,496 h Screw diameter (mm): 2 screws Ø60 23.6L/D) Head-Accumulation volume: MULLER - 792 cm³ Max. die diameter: 28 mm Locking force (t): 12 t Platform dimensions (H x W): 765 x 800 mm Max. mold dimensions (H x W): 1140 x 1600 mm Max. mold weight: 2500 kg Opening (min/max): 800/1400 mm Oil volume: 100 L Press weight: 19,650 kg Press dimensions (L x W x H): 5.5 x 6.2 x 4 m
Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 600 mm -Engine power: 4.0 kW / 2910 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 600 x 40 mm -Dimensions: 675/1120/H880 mm -Weight: 83 kg
Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 740 mm -Engine power: 7.5 kW / 2925 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 740 x 40 mm -Dimensions: 600/1050/H1000 mm -Weight: 152 kg
diameter range 8-16 mm shaft length under head 25-180 mm max. cut-off length 220 mm output - pieces/min 70
bushing cut-off diameter range 8-18 mm number of dies 5 number of stations (incl. cut off) 6 shaft length under head 120 mm cutting length 140 mm output - pieces/min 60-170 press power 100 to
good condition diameter range 10-20 mm shaft length under head 180 mm cutting length 230 mm output - pieces/min 45/50/56/63 press power 160 t plane of stroke 240 mm
bushing cut-off , PKO , IFO , Slug feeding possible diameter range 16-34 mm number of dies 5 number of stations 6 cutting length 210 mm shaft length under head 180 mm output - pieces/min 55-80 press power 450 t
bushing cut-off , PKO diameter range 16-30 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 235 mm shaft length under head 180 mm output - pieces/min 90 press power 380 to
bushing cut-off diameter range 16-27 mm number of dies 4 number of stations 7 cutting length 50-240 mm shaft length under head 30-180 mm range of thread length 95 mm max. width acros flats 24-41 mm output - pieces/min 84
bushing cut-off diameter range 16 - 30mm number of dies 4 number of stations (incl. cut off) 5 cutting length 260 mm shaft length under head 225 mm output - pieces/min 60-80 press power 450 t
bushing cut-off diameter range 23 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 190 mm shaft length under head 175 mm output - pieces/min 120 press power 220 to
bushing cut-off , PKO , IFO diameter range 10-26 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 220 mm shaft length under head 165 mm output - pieces/min 35-70 press power 380 to
bushing cut-off diameter range 23 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 175 mm shaft length under head 130 mm output - pieces/min 86 - 130 press power 220 to
bushing cut-off diameter range 8-22 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 175 mm shaft length under head 6-140 mm output - pieces/min 125 press power 250 to
bushing cut-off , PKO diameter range 8-22 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 175 mm shaft length under head 155 mm output - pieces/min 105 press power 250 to
bushing cut-off , PKO diameter range 10-22 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 200 mm shaft length under head 160 mm output - pieces/min 60 max. thread length 95 mm max. width acros flats 32 mm
bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer diameter range 8,5-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm
bushing cut-off diameter range 8 - 20 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 175 mm shaft length under head 142 mm output 40-80 press power 250 to
diameter range 8-20mm number of dies 4 number of stations (incl. cut off) 5 output - pieces/min 50 shaft length under head 200 mm cutting length 225 mm
bushing cut-off , PKO , IFO diameter range 17 mm number of dies 4 number of stations 5 cutting length 30-230 mm shaft length under head 40-190 mm output - pieces/min 70-110 press power 160 t
diameter range 10- 18 mm number of dies 4 number of stations 5 cutting length 155 mm shaft length under head 125 mm output - pieces/min 90 press power 200 to max diameter of the head 35 mm
bushing cut-off diameter range 8-16 mm number of dies 2 number of stations (incl. cut off) 4 cutting length 160 mm shaft length under head 130 mm output - pieces/min 100
bushing cut-off , PKO diameter range 7-15 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 10-160 mm shaft length under head 15-130 mm output - pieces/min 130 press power 150 to
maximum number of results exceeded
please refine your search
