british flag
Resale Logo

block used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information international brokers in used printing and paper converting equipment  Palm Brokers ApS  http://www.palmbrokers.dk 
banner logo
start page > keywords block > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121111854 1300

THERMOFIN TDD.1-091.24 for sale
Dry-cooler V-Block 575kW


Manufacturer: Thermofin Medium: Water glycol 70 / 30% Medium temperature: occurs 40 ° C.Austritt 35 ° C. Cooling capacity: 575kW air temperature: 25 ° c (inlet) Fans: 8 pieces, 2, 5kW, 400V, 50 Hz, 3 wire Connect ...
used machine
 
Manufacturer: Thermofin
Medium: Water glycol 70 / 30%
Medium temperature: occurs 40 ° C.Austritt 35 ° C.
Cooling capacity: 575kW air temperature: 25 ° c (inlet)
Fans: 8 pieces, 2, 5kW, 400V, 50 Hz, 3 wire
Connection: Entrance 2xDN100, exit 2xDN100
Dimensions: Lxwxh = 5300x2200x2300mm
Weight: 2100kg
Noise level: 65 DB (a) distance of 10 m, year built: 2008
Condition: Very good, slats OK, tightness Jenbacher cogeneration plants tested
2008
Price  
    request
121098281 101

AXELSON 124 for sale
Numerically Controlled Machining Centres


Axelson CNC Rotary team machine GE Fanuc O-TD control Speeds: 6-750 RPM Max swing in 1. "Cap: 124" Max length in the 1 gap completely open: 32 "C.C. "Maximum swing in 2nd Cap: 96" ...

 

Axelson CNC Rotary team machine

GE Fanuc O-TD control

Speeds: 6-750 RPM

Max swing in 1. "Cap: 124"

Max length in the 1 gap completely open: 32 "C.C.

"Maximum swing in 2nd Cap: 96"

Max length in the 2nd gap completely open: 96 "C.C.

Centre distance: closed: 105 "C.C.

Middle distance gap open: 180 "C.C.

"Swing over cross slide: 18"

"Swing over carriage: 32"

Main motor: 40 H.P..

"Spindle hole diameter: 2-1 / 2"

Equipped with:

32 "4-jaw hand Chuck with 6" diameter hole.

Telescopic spindle

Pivoting connection

(2) boring bar holder

KDK tool block with tool holder

Various turning tools, Chuck and more

Steady rest

Safety enclosure

Raised operator

Cooling system

All available manuals and documentation

Dimensions in the system installed: 190 ' F-B X 129 "L-R X 142"high
 
12,400 €  
    request
121098218 834

HORIZON BQ 270 for sale
Binding machines


2005, 1 clamp, miller, side gluing, automatic cover feeder, touch screen, block size max. 320x320 mm, min. 135x105 mm, block thickness 1-50 mm, size of cover max. 320x660 mm, min. 135x230 mm, max. speed 500 cycles/hour,  ...

 
2005, 1 clamp, miller, side gluing, automatic cover feeder, touch screen, block size max. 320x320 mm, min. 135x105 mm, block thickness 1-50 mm, size of cover max. 320x660 mm, min. 135x230 mm, max. speed 500 cycles/hour, very good condition
 
14,500 €  
  SK   request
121080605 102

HANKOOK V. TURNMILL VTC 5060E for sale


HANKOOK Vertical Turnmilll 5000/6000 x 4500 Model VTC-5060E New In 2010 Control Fanuc 31i A Equipped 4 jaw Chuck 5000mm ATC 24 ( milling 12 +  ...
used machine
 
HANKOOK Vertical Turnmilll 5000/6000 x 4500

Model VTC-5060E
New In 2010

Control Fanuc 31i A

Equipped 4 jaw Chuck 5000mm
ATC 24 ( milling 12 + turning 12 )
Through Spindle Coolant
Through Tool Coolant
Tool Setter
Heidenhain Scales ( X,Z,C )
High Pressure Coolant System
Hydraulic Power Unit,22kw
Hydrostatic Oil Cooling System,19.5KVA
Splash Guard
Telescopic Steel Cover ( X )
Chip Conveyor & Tank
Horizontal Attachment BT 50
? Universal Angle Attachment BT 50
Square Tool Holder 50 x 240,290mm
Square Tool Holder 50 x 190,240mm ( through coolant type )
Boring Tool Holder BA type 32 x 370mm
Boring Tool Holder BP type 32 x 320mm
Boring Tool Holder BF type 32 x 370mm
Side Lock Holder 80pie x 295mm
Work Light,Patrol Lamp
Leveling Blocks

Spec Table dia 5000mm
Turning dia 6000mm
Turning height 4500mm
Max torque 35,109N.m
Max cutting force 33,110kgf
Table load 300ton
Table speed 1~50rpm/auto 2 step
Ram travel 2500mm
Saddle cross travel 4235mm
Crossrail travel 3000mm
Milling spindle motor AC37/45kw
Milling spindle speed 30~3000rpm
Milling spindle torque 190kgf.m
Table index 0.001degree
C axis feed 0~900degree/min
C axis rotation 120degree/min
Rapid feed 6m/min ( X,Z ),500mm/min ( W )
Cutting feed 6000mm/min ( X,Z )
Ram section 400 x 400mm
Spindle taper ISO 50
Tool size 50 x 50mm
Max tool weight 110kg
ATC pull stud SK50A ( DIN69872 )
Table motor AC100kw x 2set
Servo motor AC14kw ( X,Z ),AC14kw x 2 ( W ),AC16kw ( C )
Machine weight 230ton
Machine dimension 14,000 x 7,500 x 13,100mm ( L x W x H )
2010
Price  
  PL   request
121068586 101

DECKEL MAHO DMU 80 MONOBLOCK for sale
Processing Centers


Technical data: Travel (x/Y/Z): 980 / 630 / 630 mm Table size: 1250 x 700 mm HEIDENHAIN control Spindle retainer: SK 40 ISO maximum workpiece weight: 700 kg Places in the tool changer: 32 maximum tool length: 315  ...
used machine
 
Technical data:
Travel (x/Y/Z): 980 / 630 / 630 mm
Table size: 1250 x 700 mm
HEIDENHAIN control
Spindle retainer: SK 40 ISO
maximum workpiece weight: 700 kg
Places in the tool changer: 32
maximum tool length: 315 mm speed spindle: 20-12000 RPM.
Machine weight: around 9.5 to
Dimensions machine (length x width x height): 3500 x 2500 x 2600 mm
2006
Price  
    request
121068188 1900

ATTREZZATURE E MACCHINARI Monoblocchi for sale


Equipment and machinery Facilities and construction: -2 insulated single blocks -surveillance system with DVR and cameras maritime Container Machinery and equipment -Octopus Atlas -Cutter Stihl 460 with 25 cm, 2 u ...

 
Equipment and machinery
Facilities and construction:
-2 insulated single blocks
-surveillance system with DVR and cameras
maritime Container
Machinery and equipment
-Octopus Atlas
-Cutter Stihl 460 with 25 cm, 2 units
-Sander APM AEC L6
-Dewalt Grinders D28/129 QS
-Industrial broom Butti BelNet
-shovel for forklift
For sale exclusively on 15 November at 11 in Fabriano (AN)
For more information contact us at 0307751645
 
12,730 €  
  IT   request
121048019 1004

ZENITH 939 AZ for sale
Concrete block production equipment


1 PCs gebr. Mobile concrete stone paver 939 AZ with core and attachment part incl. table built in 1993 Seemed to run. For questions we are gladly available. Jimoh - measuring and control technology Tel 0049 171 ...
used machine
 
1 PCs gebr. Mobile concrete stone paver 939 AZ with core and attachment part incl. table built in 1993

Seemed to run.

For questions we are gladly available.

Jimoh - measuring and control technology
Tel 0049 171 6232061
1993
Price  
    request
121028597 901  

DEUTZ-FAHR AT M 650 PL DCR for sale
Agricultural tractors


135 kW, overhauled engine, 50 hours, reconditioned gearboxes, hydraulic block damage: demolished mount tyres: front 540/65/34 20% profile, rear 650/65/42 35% profile; Front linkage,
used machine
 
135 kW, overhauled engine, 50 hours, reconditioned gearboxes, hydraulic block damage: demolished mount tyres: front 540/65/34 20% profile, rear 650/65/42 35% profile; Front linkage,
2008
35,000 €  
    request
121028591 701  

ALFA LAVAL 4.500 KG/H Blocks for sale
Chester cheese production plant


A 3 127 The complete Cester-Cheese production is controlled from one control room, working there is 1 person per shift. Capacity is approx. 4.500 kg Chester cheese in block form Pos. 1 3 cheese producti ...
used machine
 
A 3 127

The complete Cester-Cheese production is controlled from
one control room, working there is 1 person per shift.
Capacity is approx. 4.500 kg Chester cheese in block form
Pos. 1
3 cheese production plant
content: 15.000 litre per cheese production plant
connected with a stage to customer the 3 cheese
maker plant.
Under the stage between cheese maker 7 and 6
is installed:
a inductive milk flow meter from Endress und Hauser
2 centrifugal pumps from Koch and Pasilac
1 membrane positive pump for cheese curd and whey
mixing to the Damerow curd drainage plant
Measurements from the cheese maker:
length 4,74 m, breadth 3,20 m, high 3,47 m

Pos. 2
1 plate heater with one plate section
manufacturer is Südmo-KMA
KS 35 FO-353, Manufacturer year is 1998

Pos. 3
1 smal dosing pump with a small round balance
tank, to dose salt solution

Pos. 4
1 air conditioner plant with hose ventilator

Pos. 5
1 pipe conncetion plate with electronic
connection control

Pos. 6
Under the cheese maker plants is installed
1 Alfa Laval drainage conveyor to dry the cheese curd,
what is coming from the KF cheese maker vessels.
The cheese curd will be distribute to a thick cheese
curd cake.
In the end of this drainage conveyor the closed cheese
curd cake will be shredded.
Over a outside standing salt silo tank will be dosing
dry salt into the shredded cheese curd directly in the
outlet of the Alfa Laval drainage conveyor.
Measurement of the Alfa Laval drainage conveyor plant is:
length 13,2 m, breath 3,70 m, high 2,90 m

Pos. 7
The shreded cheese curd will be transported with a
worm conveyor into a cheese curd production vessel.
In this vessel the shreds of chester cheese will by dry
to the rest and the salt will be mixed with the stirrer
of the cheese vessel. During this mixing of the
chester cheese the shreds will be arrive a smaller form
The vessel, where the chester cheese shred get a
smaller size through the stirrer, has following measurements:
diameter or length; 4,31 m

Pos. 8
1 slanting installed worm conveyor transport the chester
cheese shreds and rest whey from the cheese curd outlet
to the inlet of a rectangular constructed balance tank with
sieves.
With the sieves in this balance tank we separate whey
from the Chester cheese shreds, before we transport
the dry cheese shreds in the chester cheese in a round
vacuum tank.

Pos. 9
After the filtration of rest whey the chesse shreds will be
transport from the rectangular drainage vessel into a
round constructed vacuum vessel. From this vessel
we transport with a batch vacuum sucking plant the
cheese shreds into a Caseomatik drainage and cheese
forming plant.

Pos. 10
4 rectangular constructed chester cheese curd drainage
and cheese forming columns.
Total high is 6,54 m.
The formed Chester cheese block have following
measurements: 36.5 cm x 28,5 cm x high 19 cm
The space requirement of the 4 columns is:
4 x 8 m, high 6,54 m
In the bottom half of the 4 columns the pressed
Chester cheese is put out with a hydraulic cylinder
and will be packed in blue Chester cheese ripening bags.
This work is done by hand half automaticly.
The still open ripening bag with the Chester cheese block
will be transport with a conveyor to the half auomaticly working
vacuum packaging machine.

Price up standing place: 182.600,00 Euro






1998
182,600 €  
    request
121000387 103

INGERSOLL 120 x 144 x 24 ft for sale
Horizontal Floor Type Milling And Boring Machines


120" x 144" x 24ft Ingersoll 100 hp Single Spindle Openside Milling Machine – Re:24210 This machine consists of a bed and table and a main housing carrying a single spindle motor-driven head having vertical feed and ...

 
120" x 144" x 24ft Ingersoll 100 hp Single Spindle Openside Milling Machine – Re:24210

This machine consists of a bed and table and a main housing carrying a single spindle motor-driven head having vertical feed and traverse movement.

The bed has a finished pad on the left-hand side so that a bedwing and outboard support can be added to the machine when required.

Capacity:
Vertical distance from table to centerline of spindle 0-144"
Length of table feed and traverse 24'
Length of quill travel from face of head 0-24"

Bed (3 ways):
Width across travel ways 112"
Overall length, approx. 52.5'

Table:
Working surface width 120"
Working surface length 24'
Overall length 26'
• Power operated lock
• Johnson Drive
• T-slots & Pin holes

Housing:
Width across housing ways 90"

Head:
• Movement on housing is made through two (2) elevating screws.
• Hand-operated locks
• Contains a quill which carries the spindle
• Spindle is driven by a 100 HP adjustable speed drive DC motor through gearing
• Flywheel on spindle drive

Spindle:
• The spindle is equipped with a No. 450 taper, 4-1/2" in diameter at the large end, ¾" diameter taper per foot

Quill:
Spindle quill diameter 22"
Power and hand adjustment 24"
• Power adjustment is independent of table and head movement
• Hand operated lock

Spindle Speeds:
Spindle speed, approx. 10-130 RPM
• The spindle has three (3) ranges of speed. Medium starts at 14 RPM, and high-speed range is full capacity of the 100 hp drive motor.

Feed Distribution:
• The machine is arranged with two (2) 2-Motor feed boxes, one for the head feed and one for the table

Feed & Traverse Rates:
Feed Rapid Traverse
Table ¾" – 36" per minute 20 ft. per min
Head ¼" – 12" per minute 8 ft. per min
• Quill is equipped with an electronic feed motor providing feed and traverse movements ranging from ¾" – 24" a minute

Full Lubrication for all areas:

Motors and Electrical Equipment:
Qty. Description
1 Main Motor 100 hp, 575/1725 RPM, 230 volts, DC, drive motor
2 Feed Motor 7-1/2 hp, 575/2300 RPM, DC
2 Head & Table Drive Motors 40 hp, AC, foot mounted traverse motors
2 Lubricating Pump Motors ½ hp, AC,
1 Quill Adjust Motor 3 hp, 1150/2300 RPM, DC, 65/2300 FPM
1 Coolant Pump Motor 2 hp
1 Table Clamp Motor 15 ft. lb., 1800 RPM, Shell type

Electrics:
• 230 volts, DC
• 440 volts, AC
• The DC motors receive DC power from a 900 kW MG Set driven by a 150 hp motor

Machine controls:
• The machine is primarily controlled via a portable pendant with the following :
1. Start and stop drive motor
2. Start, stop, reverse, jog, feed, fast feed and traverse table
3. Clamp table
4. Start, stop, reverse, jog, feed, fast feed and traverse bed
• The control cabinet mounted on the operators platform contains the following:
-Hand operated rheostats for increasing or decreasing the feed rates
-Stop and start buttons for chip conveyor, coolant pump motor and lube pump motor.

Coolant

Chip Conveyor

Net weight - 330,000 lbs


(2) Hydraulic Clamping Fixtures:
• Fixtures consists of two complete clamping units, each unit including a housing, clamping rail and supporting brackets.
• Adjustable Clamping Rail – to clamp various die block widths
• Housing is located on the table in one of two positions; one for blocks from 14" to 27" thick, and a second for blocks 27" to 40" thick
• Each fixture is equipped with pendant operated through push buttons and selector switches
Capacity – the fixture is adjustable for holding the following sizes of die blocks:
-Thickness – 14" – 40"
-Width – 36" – 90"
-Length – 58" – 21-1/2 ft.
-Electrics – 440 volt, 3 phase, 60 cycle, AC as follows:
-(1) 7-1/2" HP AC motor for adjusting crossrail
-(1) 5 HP AC motor for driving the hydraulic pump motor
-Weight – estimated weight of each fixture and its parts is 140,000 lbs
-Magnetic Clamping on each fixture as follows:
-Fixture 1 – Sundstrand magnetic Control, 480 v AC - 244 DC
-Fixture 2 – Neutrofier II Magnetic Control, 280/400 AC – 244 DC
-72" x 10" Magnetic face on each fixture
-Travel:
-Vertical travel – 64"
-Hydraulic Unit:
-Vickers

Note:
Maximum recommended weight on table is 740,000 lbs. If one fixture is used then reduce by 140,000 lbs. If two fixtures are used then reduce by 280,000 lbs.

The machine was originally designed to perform general face milling operations on die blocks.

It is currently installed under power at a NorthEast USA plant where it may be inspected on request.

We will sell the Clamping Units separately.
 
Price  
  US   request
120974208 1518

CARROPONTE CARROPONTE for sale


N° 2 CRANE LORRY 10 Ton capacity Lifting by winch Gauge bridge mm 18,800 Wheel diameter 500 mm Wheelbase mm 3,200 Simple hook block Hook lift 8,000 Power 380 volts Electrical system with inverter In conformity ...

 
N° 2 CRANE LORRY
10 Ton capacity
Lifting by winch
Gauge bridge mm 18,800
Wheel diameter 500 mm
Wheelbase mm 3,200
Simple hook block
Hook lift 8,000
Power 380 volts
Electrical system with inverter
In conformity with article 11 DPR 459/96
Jentzsch
Construction drawings
For sale exclusively on the day 28.11.2017, 10:30 hours, Berzo Inferiore (BS)
The machine is part of a single lot of machinery tools
For more information contact us at 0307751645
 
5,000 €  
  IT   request
120959816 703

HENNEKEN B6 for sale
Tumbler


Tank: diameter 1350 mm, shot 1800 mm Dished tray area: According to the HPO-TÜV Cover: diameter 500 mm Total capacity: 3000 l Cooling capacity:-10°C C, 9770 W Cooling: available Cleaning opening: a check port of  ...
used machine
 
Tank: diameter 1350 mm, shot 1800 mm
Dished tray area: According to the HPO-TÜV
Cover: diameter 500 mm
Total capacity: 3000 l
Cooling capacity:-10°C C, 9770 W
Cooling: available
Cleaning opening: a check port of diameter 150 mm
Type of protection: IP 65
Location: Bavaria, Germany
Availability: as of now
Condition: very good, operational

Drive: Gear SEW 3 KW
Frequency converter 3 KW with Bremsschopper and brake resistor

Vacuum pump: Bush 0063; 1.5 kW installed in the machine body

Water separator: Volume 20 l
Drain valve with mechanical overflow safety device

Control: machine control Siemens, 34 programmes a 34 blocks with Siemens Touchpanel KTP 600, SPS S7 in the Edelstahgehäuse, fully programmable

Hardware: Siemens stainless steel housing
Mounted inside the machine body.

Container with two-sided dished
1 piece opening of diameter 500 mm with protective discharge collar
Inside: Discharge with triangle mixing baffles (baffles)

Cover with suction device to vacuum up the Lake Ext.

Cooling: Standard completely in stainless steel housing, maximum working pressure 3.5 bar
Cooling temperature to and is values are visible in the machine control display.
Cooling temperature fully programmable.
2014
29,500 €  
    request
120959814 703

HENNEKEN B6 (2761.1) for sale
Tumbler


Tank: diameter 1350mm, shot 1800mm Total capacity: 3000 l Cooling capacity:-10°C, 9770 W Cooling: available Cleaning opening: an inspection opening á 150 mm Type of protection: IP 65 Location: Bavaria, Germany A ...
used machine
 
Tank: diameter 1350mm, shot 1800mm
Total capacity: 3000 l
Cooling capacity:-10°C, 9770 W
Cooling: available
Cleaning opening: an inspection opening á 150 mm
Type of protection: IP 65
Location: Bavaria, Germany
Availability: as of now
Condition: operational, well-kept

Drive: Gear SEW 3 KW
Frequency converter 3 KW with brake chopper and brake resistor

Vacuum pump: Bush 063; 1.5 kW installed in the machine body

Water separator: Volume 20 l
Drain valve with mechanical overflow safety device

Control: machine control Siemens, 34 programmes a 34 blocks with Siemens touch panel TP177, SPS S7 in the Edelstahgehäuse, fully programmable

Hardware: Kloeckner Müller in stainless steel housing
Mounted inside the machine body.

Container with two-sided dished
1 piece opening of diameter 500 mm with protective collar ejection Cone
Inside: Discharge with triangle mixing baffles (baffles)

Cooling: Standard completely in stainless steel,
Cooling temperature to and is values are visible in the display of the machine body.
Cooling temperature fully programmable.
2011
16,500 €  
    request
120959798 703

HENNEKEN B6 (2728.1) for sale
Tumbler


Tank: diameter 1350mm, shot 1800mm Total capacity: 3000 l Cooling capacity:-10°C, 9770 W Cooling: available Cleaning opening: an inspection opening á 150 mm Type of protection: IP 65 Location: Bavaria, Germany A ...
used machine
 
Tank: diameter 1350mm, shot 1800mm
Total capacity: 3000 l
Cooling capacity:-10°C, 9770 W
Cooling: available
Cleaning opening: an inspection opening á 150 mm
Type of protection: IP 65
Location: Bavaria, Germany
Availability: as of now
Condition: operational, well-kept

Drive: Gear SEW 3 KW
Frequency converter 3 KW with brake chopper and brake resistor

Vacuum pump: Bush 063; 1.5 kW installed in the machine body

Water separator: Volume 20 l
Drain valve with mechanical overflow safety device

Control: machine control Siemens, 34 programmes a 34 blocks with Siemens touch panel TP177, SPS S7 in the Edelstahgehäuse, fully programmable

Hardware: Kloeckner Müller in stainless steel housing
Mounted inside the machine body.

Container with two-sided dished
1 piece opening of diameter 500 mm with protective collar ejection Cone
Inside: Discharge with triangle mixing baffles (baffles)

Cooling: Standard completely in stainless steel,
Cooling temperature to and is values are visible in the display of the machine body.
Cooling temperature fully programmable.
2011
16,500 €  
    request
120918214 706

SIMONAZZI / ITALY Bluestar 2000 for sale
Filling installations


Triblock PET bottle filling system; 32-32-8 for CO2-containing soft drinks; 32 digit rinser; 32 fill valves; 8 head screw. Capacity: 5,000 bottles / hour x 1,500 ml according to manufacturer's instructions. for CO2-conta ...
used machine
 
Triblock PET bottle filling system; 32-32-8 for CO2-containing soft drinks; 32 digit rinser; 32 fill valves; 8 head screw. Capacity: 5,000 bottles / hour x 1,500 ml according to manufacturer's instructions. for CO2-containing soft drinks; Filler Division 141 mm, 28 mm screw caps; Fastener feeding system; installed power of 11 kW; Control Siemens S7
2002
27,000 €  
    request
120918207 703

REISSER GB200 for sale
Portioning machines


Reisser GB200 Mince portioner, deisgned to work with VF, precise weight formed blocks to fit into trays, production speed is up to 60 (1lb portions per min)

 
Reisser GB200 Mince portioner, deisgned to work with VF, precise weight formed blocks to fit into trays, production speed is up to 60 (1lb portions per min)
 
Price  
  UK   request
120918201 706

ICS / SLOVENIA ASI-32/TPS-32/8 for sale
Filling installations


Triblock PET bottle filling system; 32-32-8 for CO2-containing soft drinks
used machine
 
Triblock PET bottle filling system; 32-32-8 for CO2-containing soft drinks
2004
32,500 €  
    request
120917694 212

BES BOLMANN HD MW for sale
Drying chambers


Wood - steam plant, steam Chamber with Kessselanlage LOOS steam Chamber 1: DämpfkammermaÃ?e WxDxH-InnenmaÃ?e 4,20 x 8.00 m x 3.40 m-AuÃ?enmaÃ?e block 10.70 x 8,28 m x 5.40 m (with roof) Stac ...

 
Wood - steam plant, steam Chamber with Kessselanlage LOOS steam Chamber 1: DämpfkammermaÃ?e WxDxH-InnenmaÃ?e 4,20 x 8.00 m x 3.40 m-AuÃ?enmaÃ?e block 10.70 x 8,28 m x 5.40 m (with roof)
Stack weight 1 x 4,00 m, 5 x 0.80 m, 2 x 1,40 m
Stack Bar 24 mm stack laminated 2 x 100 mm NET wood volume 21 m³
Board thickness 40 mm
Stacking factor 75%
Execution aluminium
Type front stack
Door version lifting sliding door B 4.20 x H 3.60 m heating medium steam 0.7 bar heat evaporation 220 kW steam Chamber 2: DämpfkammermaÃ?e WxDxH-InnenmaÃ?e 5.50 x 8.00 m x 3.40 m-AuÃ?enmaÃ?e block 10.70 x 8,28 m x 5.40 m (with roof)
Stack weight 1 x 5,00 m, 5 x 0.80 m, 2 x 1,40 m
Stack Bar 24 mm stack laminated 2 x 100 mm NET wood volume 27 m³
Board thickness 40 mm
Stacking factor 75%
Execution aluminium
Type front stack
Door version lifting sliding door B 5.50 x H 3.60 m heating medium steam 0.7 bar heat evaporation 260 kW cylindrical smoke tube boilers LOOS boiler type U ND Sandoval steam power 1000 kg/h
Bruttowärmleistung 646 kW
Water temperature 90 °
Max. Operating pressure 1 bar
Voltage 3 x 400/N/PE
Water content 924 l purpose steam generation for wooden damping
Fuel gas
706 total thermal output kW
Calorific value 10.2 kWh / m ³
Exhaust gas mass flow 1010 kg / h
Exhaust gas temperature 201 ° C

 
Price  
    request
120917528 402

Cheese Slicing & Packing Line


The Cheese is initially cut into either a stack or single in the Dixie Union slicer and is then transferred to a Meister buffer machine. The Meister unit controls the speed of the line by releasing the cheese stacks/sing ...

 
The Cheese is initially cut into either a stack or single in the Dixie Union slicer and is then transferred to a Meister buffer machine. The Meister unit controls the speed of the line by releasing the cheese stacks/singles at a rate of 45 portions per minute. Each portion is then transferred to the Cryovac flow wrapper and tray applicator. Initially the inverted tray is placed on top of the cheese portion and then wrapped in plastic film. The tray is then rotated 180 degree so that it is the right way up. The tray then passes through a three stage Cryovac heat/shrink tunnel and then on to the three labelling machines. These apply the barcode, price and manufacturers name. This line includes the following: Dixie Union Cheese Slicer Model: SL484 Capacity: 450 - 500 slices/minute Maximum Block Size: 900 x 180 x 120mm (l x w x h) Slice Thickness: 2 - 50mm Cryovac Tray Applicator & Flow Wrapper Model: CJ50 BDF Capacity: 45 - 50 pieces/minute (portions) Foil Width: 250 - 500mm Cryovac Three Stage Shrink Tunnel Model: CJ51 Max Temp: 300 C Tunnel Speed: 4 - 25 metres/minute Meister Product Buffer Meister Product Rotator Alpha Labellers Bizerba Labeller Condition: Used This lot is located in Lockerbie
 
used machinery auction RESALE 35,000 gbp  
  UK   request
120916967 1402

ELEPHANT CHAIN BLOCK CO. 7.1 x 21 Grade T (8) for sale
FA Lifting Chain


Power source: 380V Lifiting speed: 6.3 M/min Current: 3.7A
used machine
 
Power source: 380V
Lifiting speed: 6.3 M/min
Current: 3.7A
1988
Price  
  NL   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter