block bottom used for sale

1600 hL – Hermex – Flat-bottom fibreglass tank Used Hermex fibre tank, with a capacity of 1600 HL, designed for the storage of liquids in the wine, agricultural or agri-food sectors. Thanks to its vertical construction, flat bottom and large capacity, this tank optimises storage while limiting the footprint on the ground. It is equipped with an oval autoclave door facilitating access to the inside of the tank for inspection, cleaning and maintenance operations. Its chimney with stainless steel hatch, its taster tap, its pumping tube and its total drain tap on flange make it a functional and immediately usable solution to complete a storage installation. Technical characteristics Type: vertical storage tank Brand: Hermex Capacity: 160,000 liters Material: fiber Configuration: vertical cylindrical tank Roof 1 chimney chimney with stainless steel hatch Ferrule 1 oval autoclave d ...

283 hL – Cividac – 304 stainless steel tank with conical bottom on legs Used 304 stainless steel tank with a capacity of 283 HL, designed for the storage of wines, musts, juices or other liquid food in the wine and food sectors. Thanks to its conical bottom and its two racking circuits, this tank ensures partial emptying as well as total emptying in good conditions. Its oval autoclave door facilitates interior access for cleaning, control and maintenance operations. Technical characteristics Type: vertical storage tank Capacity: 28,300 liters Material: stainless steel 304 Configuration: vertical cylindrical tank Roof Defect reported: minor deformation of the dome (visible in the photos), without impact on the structure or use of the tank. 1 chimney chimney with stainless steel hatch 1 valve positioned on the chimney 2 lifting rings ferrole Peripheral reinforcement rings 1 ov ...

250 hL – Chalvignac – 304 stainless steel tank with flat bottom with 3% slopeThis CHALVIGNAC stainless steel tank with a capacity of 250 hL is designed for the storage of liquids. Its configuration, combined with a vertical cylindrical tank with a sloping flat bottom, a vertical rectangular door with external opening and a complete racking and control equipment, makes it a robust and immediately usable second-hand solution to supplement an existing storage capacity. Technical data Brand: CHALVIGNAC Total capacity: 25,000 litres Roof 1 chimney centred with lever hatch DN 500 mm anti-retention with 4 studs 1 neutral GAS tap with 33 x 42 nozzle and plug 2 lifting rings Folded U-shaped gangway support 80 x 40 x 2.5 Ferrrule 1 ladder support bar1 rectangular door 410 x 530 with external opening with closing fin and mud flap 1 tap and SIM level strip without return with graduation ...

45 hL – Brauthite Mirror – Flat-bottom fiberglass tank This 45 hL BRAUTHITE MIRROR fiber tank is designed for the storage of liquids in wine, brewing, cider and water recovery environments. Its configuration, combined with a closed vertical cylindrical tank, a flat bottom, a conical roof and simple racking and control equipment, makes it a robust and immediately usable second-hand solution to complete an existing storage capacity. Technical characteristics Brand: BRAUTHITE MIRROR Material: fibreglass Total capacity: 4,500 litres Conical roof with central tap 2 lifting rings Ferrule 1 taster tap 1 oval stainless steel autoclave door 1 steel level tap and level strip1 galvanized steel partial drain valve on 100 x 100 square flange with DN 40 Mâcon Flat Bottom outlet 1 100 x 100 square flange total drain valve with DN 40 Mâcon galvanized steel valve Dimensions Diameter: ...

1600 hL – Hermex – Flat-bottom fibreglass tank Used Hermex fibre tank, with a capacity of 1600 HL, designed for the storage of liquids in the wine, agricultural or agri-food sectors. Thanks to its vertical construction, flat bottom and large capacity, this tank optimises storage while limiting the footprint on the ground. It is equipped with an oval autoclave door facilitating access to the inside of the tank for inspection, cleaning and maintenance operations. Its chimney with stainless steel hatch, its taster tap, its pumping tube and its total drain tap on flange make it a functional and immediately usable solution to complete a storage installation. Technical characteristics Type: vertical storage tank Brand: Hermex Capacity: 160,000 liters Material: fiber Configuration: vertical cylindrical tank Roof 1 chimney chimney with stainless steel hatch Ferrule 1 oval autoclave d ...

120 hL – Dabrigeon – 304 stainless steel flat bottom tank with casing This DABRIGEON stainless steel storage tank with a capacity of 120 hL is designed for the storage of liquids in the wine and agri-food environment. Its configuration, combined with a vertical cylindrical tank with a flat bottom, a casing with a total drain valve and simple racking and control equipment, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical data Brand: DABRIGEON Material: stainless steel Total capacity: 12,000 litres Vertical cylindrical storage tank with flat bottom Roof 1 chimney chimney DN 500 mm 2 lifting rings Ferrule 1 ladder support bar 1 partial drain valve 1 taster tap 1 rectangular door in the middle of the ferrule Bottom Flat bottom with Boitard 1 total drain valve Tank on concrete base Dimen ...

283 hL – Cividac – 304 stainless steel tank with conical bottom on legs Used 304 stainless steel tank with a capacity of 283 HL, designed for the storage of wines, musts, juices or other liquid food in the wine and food sectors. Thanks to its conical bottom and its two racking circuits, this tank ensures partial emptying as well as total emptying in good conditions. Its oval autoclave door facilitates interior access for cleaning, control and maintenance operations. Technical characteristics Type: vertical storage tank Capacity: 28,300 liters Material: stainless steel 304 Configuration: vertical cylindrical tank Roof Defect reported: minor deformation of the dome (visible in the photos), without impact on the structure or use of the tank. 1 chimney chimney with stainless steel hatch 1 valve positioned on the chimney 2 lifting rings ferrole Peripheral reinforcement rings 1 ov ...

215 hL – 316L stainless steel tank with conical bottom on legs This 316 stainless steel tank with a capacity of 215 hL is designed for the storage of liquids in wine, brewing, cider and fine chemical environments. Its configuration, combined with a vertical cylindrical tank closed on legs, a conical roof and a conical bottom with triangular chute, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Material: 316 stainless steel Total capacity: 21,500 litres Roof 1 chimney chimney eccentric on the front with stainless steel hatch DN 300 mm 1 central tap with piping connected to the chimney Ferrule 1 ladder support bar 1 taster tap 1 tap and level strip 1 oval autoclave door Conical bottom on 400 mm high feet 1 DN 50 Mâcon total drain valve on square flange with PVC plug D ...

283 hL – Cividac – 304 stainless steel tank with conical bottom on legs Used 304 stainless steel tank with a capacity of 283 HL, designed for the storage of wines, musts, juices or other liquid food in the wine and food sectors. Thanks to its conical bottom and its two racking circuits, this tank ensures partial emptying as well as total emptying in good conditions. Its oval autoclave door facilitates interior access for cleaning, control and maintenance operations. Technical characteristics Type: vertical storage tank Capacity: 28,300 liters Material: stainless steel 304 Configuration: vertical cylindrical tank Roof Defect reported: minor deformation of the dome (visible in the photos), without impact on the structure or use of the tank. 1 chimney chimney with stainless steel hatch 1 valve positioned on the chimney 2 lifting rings ferrole Peripheral reinforcement rings 1 ov ...

530 hL – 1994 Hermex – Flat-bottom fibreglass tank Used Hermex fibre tank, with a capacity of 530 HL, designed for the storage of liquids in the wine, agriculture or agri-food sectors. Thanks to its vertical construction, flat bottom and large capacity, this tank optimises storage while limiting the footprint on the ground. It is equipped with an oval autoclave door facilitating access to the inside of the tank for inspection, cleaning and maintenance operations. Its chimney with stainless steel hatch, its taster tap, its winding tube and its total drain tap on flange make it a functional and immediately usable solution to complete a storage installation. Technical characteristics Type: vertical storage tank Brand: Hermex Year: 1994 Capacity: 53,000 liters Material: fiber Configuration: vertical cylindrical tank Roof 1 chimney chimney with stainless steel hatch Ferrule 1 oval ...

62 hL – Brauthite Mirror – 304 stainless steel tank flat bottom on legs This BRAUTHITE MIRROR stainless steel tank with a capacity of 62 hL is designed for the storage of liquids in wine, brewing, cider, slag, fine chemicals and water recovery environments. Its configuration, combined with a vertical cylindrical tank closed on legs, a conical roof and a flat bottom, makes it a robust second-hand solution that can be used immediately to supplement an existing storage capacity. Technical data Tank n° 11 Vertical cylindrical stainless steel tank on closed legs Brand: BRAUTHITE MIRROR Capacity: 6,200 litres Material: stainless steel Roof 1 off-centre chimney with hatch DN 500 mm 1 central tap 2 lifting rings Ferrule 1 ladder support bar 1 rectangular door 530 x 420 mm opening exterior 1 tap and level strip 1 tap on bottom of ferrule DN 80 with PVC plug, sludge type 1 drain at th ...

120 hL – Dabrigeon – 304 stainless steel flat bottom tank with casing This DABRIGEON stainless steel storage tank with a capacity of 120 hL is designed for the storage of liquids in the wine and agri-food environment. Its configuration, combined with a vertical cylindrical tank with a flat bottom, a casing with a total drain valve and simple racking and control equipment, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical data Brand: DABRIGEON Material: stainless steel Total capacity: 12,000 litres Vertical cylindrical storage tank with flat bottom Roof 1 chimney chimney DN 500 mm 2 lifting rings Ferrule 1 ladder support bar 1 partial drain valve 1 taster tap 1 rectangular door in the middle of the ferrule Bottom Flat bottom with Boitard 1 total drain valve Tank on concrete base Dimen ...

Top and bottom wide belt sander SAC mod. 4R 300 - CE rules - Working width mm. 300 - Max. working height mm. 150 - Min. height mm. 5 - Min. piece lenght mm. 240 mm. - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each - Volt 400/50 - S/N AA0985 - Year 2001

Material Name: Oven Bottom Center Cover Material Brand: Generic Model: NIL Material Type: 2997mm Material Specification: 2997mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F42

Material Name: Oven Bottom Panel 2000mm x 1130mm Material Brand: Generic Model: NIL Material Type: 2000mm x 1130mm Material Specification: 2000mm x 1130mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F42

machine overhauled, rotary feeder, one valve station, bottom capping strip with 2 color tail end printers, packeting station, Tube width: 30-70 cm, Tube length 48-140 cm, bottom width 7-16 cm

Equipment: Agitator,Manufacturer: Behälter KG,Condition: used,Volume: 5,000,Bottom floor: Flat bottom,Design: standing,Stand shape: Frame,Diameter inside: 1,440,Cylindrical height: 3,000,Total height: 3,500,Manhole / dome: in cylinder,Type plate: Yes,Outlet : 80,Note: slight adhesions,Remarks: Frame made of V2A (at the moment 4 wooden blocks are screwed underneath see photos) Manhole approx. 345 x 440 mm,Material in contact with the product: V2A 1.4301 (AISI304), Agitator: Agitator Flange,Bottom Bearing: No,Current Interferer: Yes,Agitator Arrangement: Center in Topsoil,Bottom Bearing: No,Current Interferer: No

Manufacturer: Schwarz Apparate- und Behälterbau,Condition: used,Volume: 4,000,Lower bottom: flat bottom,Top bottom: screwed lid with hinged segment,Design: upright,Diameter inside: 1,590,Cylindrical height: 2,000,Total height: 2,200,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 1.5,Type plate: Yes,Outlet: available,Outlet : 48,Note: slight adhesions,Remarks: Tanks slightly out of round Spout is deeper than tank bottom (note when setting up) Sheet metal cut-outs in the lid Type plate only available for 2 tanks 1 tank with ball valve (see

Condition: factory new,Volume: 105,000,Specific gravity of the medium: 1,250,Lower bottom: flat bottom,Top bottom: conical bottom,Design: upright,Diameter outside: 3,342,Cylindrical height: 12,000,Total height: 12,500,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 2,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/vent, disc valve,Outlet: DN80 DIN 11851 ,Remarks: Pictures shown are of an identical tank with slightly smaller volume,material in contact with the product: V4A 1.4401/04 (AISI316),material feet:

For sale is a used stainless steel tank from the German manufacturer Möschle Apparate- & Behälterbau with a useful volume of 22,000 liters., The tank was in the year 2012 manufactured and made of stainless steel 1.4301 / 1.4307Due to its hygienic design, it is suitable for numerous applications in the food, beverage, as well as pharmaceutical and chemical industries., The container has a conical base for the thorough residual draining as well as about a floor mixer of the manufacturer Stelzer. Installed is a Stelzer Hermet 2060 with a motor power of 5,5 kW and a speed of 915 min⁻¹Thereby the tank is suitable not only as a storage container but also as a process and buffer tank for liquid to moderately viscous products., The equipment also includes an oval manhole, a fixed spray ball for CIP cleaning, and a continuous railing., The tank is out of service, already separated from the e ...

CIP tank. Volume 2x 5.000 liter (1x compartment of 10.000 liter dividend in 2x compartments). Pressure in the tank: ATM. Aearator on top of the tank. Manholes on the side (oval 450 x 300 mm) and on the top (400 mm diameter) of the tank (1x for each compartment). CIP bowls for cleaning inside the tank. 3 Stainless steel legs. Outlet in the bottom, 110 mm height. Cylindrical height: 3.000 mm. Total dimensions: Ø 2.300 x 4.100 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 2x 5.000 liter, Double jacketed: No, Insulation: No, Material: SS 304, Type of agitator: No agitator, CIP Spray bowls: Yes, Manhole: Yes 2x pieces, one in each compartment, Number of feet: 3, Internal height: 3.000 ...

vertical stainless steel tanks with insulation and cladding, most recently used as storage tanks for degassed water, Additional title: vertical, insulated stainless steel tanks, Gross volume each: 14340 l, Material: stainless steel, Position: each standing on 3 feet, Base construction: cylindrical frames, Features: outlet pipe with manual valve; overflow pipe ladder bracket; manhole

Prints and applies labels to the underside of packs, The VWS LPX Blow 4/300R prints a label and blows it onto the pack from below as it runs across the belt. Useful for trays and tubs whose top has to stay clear, or when you want information on the bottom as well as a top label., The machine was built in 2014 and sits on a stand with an 800 mm belt. It runs on 230 V., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vws-lpx-bottom-labeller/, Type: Bottom labeller (print & apply), Application: Blow applicator from below, Belt: 800 mm, on stand, Electrical: 230 V, 50–60 Hz

Labeller that applies a label to the top and the bottom, This machine labels a pack on both sides in a single pass. The pack runs along the conveyor; the head above the belt places a label on the lid, the head below the belt presses one onto the base. A good fit for trays and tubs that need a label on each side., It is operated from a touchscreen on a column next to the conveyor. There is no rating plate on the machine, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/top-and-bottom-labelling-machine/, Type: Labelling machine, top and bottom label, Label heads: 2 (above and below the belt), Controls: Touchscreen, Construction: Stainless steel frame on adjustable feet

Marel labeller for the top and the bottom of the pack, This Marel labelling machine puts a label on the top and on the bottom of a pack in one pass. Packs come in on the conveyor with adjustable guides; the head above the belt labels the lid and the head below the belt labels the base., It is operated from a touchscreen next to the conveyor. The rating plate is still on the machine, but only the Marel name can be read, so the model and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/marel-top-and-bottom-labelling-machine/ , Type: Labelling machine, top and bottom label, Label heads: 2 (above and below the belt), Infeed: Conveyor with adjustable guides, Controls: Touchscreen

Sanding line with working width 1300 mm, constant working height. Line consisting of: - Undersander 2 sanding units 1 x Combi unit with contact roller 60° shore and segmented shoe, motor 22 kW 1 x Segmented shoe, motor 15 kW 1 x Brush Vacuum workpiece suction, 7.5 kW motor -Intermediate transport: 4200 x 1300 mm -Top sander 2 sanding units 1 x Combi unit with 70° shore contact roller and segmented shoe, 22 kW motor 1 x Segmented shoe, motor 15 kW, 1 x Brush Vacuum workpiece suction, motor 7.5 kW Feed speed: infinitely variable Table spring-loaded or fixed adjustable

Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction Top sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction

1) sander top VEGA 311 MRL Sanding width 1100 mm. Working thickness 3 to 160 mm working height 950 mm Sanding belt dimensions 1120 x 2620 mm. Equipment: 1) cutterblock diameter 180 mm 22 kW 47m/s 2) rubber contact roller diameter 220 mm 22 kW 18m/s 3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off 4) Finishing brush unit at output 0.75 kW diameter 150 mm feed speed adjustable 2.5-13 m/min 3 kW pneumatic sanding belt tension motor height adjustment 0.75 kW extraction rate: 11800 m²/h 2) bottom sanderVEGA U 311 MRF Sanding width 1100 mm. Working thickness 3 to 160 mm working height 920 mm Sanding belt dimensions 1120 x 2620 mm. Equipment: 1) cutterblock diameter 180 mm 22 kW 47m/s 2) rubber contact roller diameter 220 mm 22 kW 18m/s 3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off 4) Finishing brush unit at output 0.75 kW diameter 150 mm feed speed ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

150 hL – 304 stainless steel flat bottom tank with casing This 150 hL 304 stainless steel storage tank is designed for winemaking and liquid storage applications in the cellar. Its simple and robust design, combined with a roof with a chimney centred, a rectangular door with external opening, a flat bottom with a boilard and suitable racking equipment, makes it a reliable and immediately usable solution to complement an existing winery capacity. Technical characteristics Material: 304 stainless steel Total capacity: 15,000 litres Roof 2 lifting rings 1 chimney centred with hatch Ferrule 1 ladder support bar 1 door rung 1 rectangular door with external opening 1 taster tap Flat bottom with boilard 1 stainless steel total drain valve on square flange 1 sludge without cap Dimensions Diameter: 2800 mm Height: 4000 mm Location: Civray Equipment sold loaded on truck: additiona ...

258 hL – Cartier – 304 stainless steel tank closed self-emptying on sloping bottom skirt This 304 stainless steel storage tank with a capacity of 258 hl is designed for the storage of liquids in the wine and agri-food environment. Its cylindrical configuration closed on a self-emptying skirt, combined with a sloping bottom, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical data Cylindrical on self-emptying skirt Capacity: 25,800 litres Material: stainless steel Tank number: 11, 12 and 13 Closed roof with chimney and hatch Ø 550 mm 2 lifting rings Ferrule 1 taster valve 1 rectangular door 430×540 mm at the bottom of the ferrule 1 partial drain valve DIN 50 with plug 1 winding tube Bottom Sloped bottom on skirt 1 total drain valve DIN 50 4 feet under the skirt Dimensions Diameter: 3000 mm Tot ...

289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

10 hL – 304 stainless steel tank flat bottom This vertical cylindrical stainless steel tank with a capacity of 10 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a flat bottom, a closed flat roof and simple emptying equipment, makes it a robust and immediately usable second-hand solution to complement a small existing storage capacity. Technical characteristics Material: stainless steel Total capacity: 1,000 litres Closed vertical cylindrical tank with flat bottom Roof 1 round hatch diameter 200 mm Shell 1 drain valve at the bottom of the tank Connection not GAS 1\"1/4 Flat bottom Dimensions Diameter: 960 mm Height: 1600 mm Dimensions Diameter: 960 mm Height: 1600 mm Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-243

500 hL – Cidec – Flat-bottom fibreglass tank CIDEC vertical fibreglass tank, with a total capacity of 50,000 litres, designed for the storage of liquids in wine-growing, cider-making, agri-food or industrial environments. Thanks to its high-capacity design, its flat bottom with box and its stainless steel racking and emptying equipment, this tank allows functional operation for the storage and processing of liquids in outdoor or indoor vats. Technical characteristics Brand: CIDEC Total capacity: 50,000 litres Material: fibreglass Configuration: vertical cylindrical tank Roof Domed roof 1 chimney Shell 1 taster tap 1 tap and level strip 1 stainless steel partial drain valve 1 oval door Bottom Flat bottom with box 1 stainless steel total drain valve Dimensions Diameter: 3000 mm Height: 9000 mm Location: Bollène (84) Equipment sold loaded on truck: additional mandatory di ...

150 hL – 2008 Mangeard – 304 self-emptying stainless steel tank with 30% sloped bottom (maceration and draining) This MANGEARD self-emptying stainless steel tank with a capacity of 150 hL is designed for storage, maceration and draining wine applications. Its configuration, combined with a sloping skirt bottom with reinforcements, a 30% slope, a pneumatic extra-guillotine door and simple racking equipment, makes it a robust and immediately usable second-hand solution to complete a winery or strengthen a winemaking process. Technical characteristics Brand: MANGEARD Material: 304L stainless steel Total capacity: 15,000 litres Year: 2008 Conditions of use: atmospheric pressure Roof 1 chimney with stainless steel hatch with spikes DN 500 mm 1 neck Bellot stainless steel Lifting rings Ferrule 1 extra-guillotine door frame 600 x 600 mm, useful passage, with pneumatic cylinder syste ...

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...

396 hL (285 + 111 hL) – Tec Inox – 304 stainless steel tank compartmentalized flat bottom 2% on a slab Vertical storage tank in TEC INOX stainless steel of 396 hL, divided into 2 independent compartments (285 hL and 111 hL). Previously used for wine storage, it allows several separate batches to be managed within the same tank. Technical data Brand: TEC INOX Total capacity: 396 hL (285 + 111 hL) Construction: 304 food-grade stainless steel Type: compartmentalized vertical storage tank Flat bottom with 2% slopeLayout : on concrete raft Previous use: wine Equipment per compartment 1 oval door stainless steel autoclave 310 × 420 mm 1 level indicator1 total emptying 1 partial emptying 1 stainless steel chimney Ø 200 mm Dimensions Total height: 6,000 mm Location: Bollène (84) Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to this lot. ...

140 hL – Chalvignac – 304 stainless steel tank with conical bottom on legs 140 hL vertical stainless steel tank, designed for the storage, vinification and processing of liquid foodstuffs. Its conical bottom on 5 adjustable legs facilitates racking, total emptying and cleaning. Technical characteristics Brand: Chalvignac Total capacity: 14,000 litres Material: 304 stainless steel Configuration: vertical cylindrical tank on legs Roof 1 chimney 1 ladder support bar Ferrule 1 winding tube 1 thermometer 1 taster tap 1 tap and level ruler1 partial drain valve on square flange 1 rectangular door with external opening 1 total drain valve on square flange Bottom Conical bottom 5 adjustable feet Dimensions Diameter: 2,200 mm Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to this lot. Auction-ID: A1-51122-369

178 hL – Alfa Laval – 316L stainless steel tank with 2% sloping flat bottomALFA LAVAL 316L stainless steel tank with 178 hL, equipped for thermoregulation, ideal for storage and temperature management in the cellar. Its design with a 2% sloping flat bottom facilitates emptying and daily work, while maintaining a simple installation in the winery. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 17,800 litres Material: 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Conical roof 1 eccentric chimney at the front Ø 200 mm 1 thermometer Ferrule lifting rings1 oval door 310×420 mm 1 partial drain valve DN 65 1 level with tap Flat bottom inclined 2% with box 1 total drain valve with plug Dimensions Diameter: 2800 mm Ferrule height: 2800 mm Total height: 3500 mm Location: Civray Equipment sold loaded on truck ...

245 hL – Pierre Guerin – Temperature-controlled 304 stainless steel tank with sloping bottom This PIERRE GUERIN 304L stainless steel storage tank with a capacity of 245 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a flat floor on legs, a central chimney and shell circuit thermoregulation, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Brand: PIERRE GUERIN Material: 304L stainless steel Total capacity: 24,500 liters Thermoregulated Interior finish: cold rolled raw Exterior finish: brushed Roof Lifting rings 1 central chimney with PVC DN 500 hatch with clamping studs 1 tap for temperature probe1 50 Mâcon tap on chimney, internally / externally threaded Ferrule walkway support 1 stainless steel doo ...

200 hL – 304 stainless steel tank with conical bottom on legs 200 hL vertical cylindrical stainless steel tank, designed for storage in cellars or in food processing environments. Its free-standing design and its corked exterior finish make it a robust and easy-to-use tank, suitable for use at atmospheric pressure. Technical characteristics Type: Vertical cylindrical tank Material: Stainless steel Capacity: 20,000 liters Exterior finish: Corked Last use: Storing edible oil (Advice before use: Clean the tank to remove edible oil residues) Roof 1 chimney Ferrule 1 rectangular door (external opening) 1 taster valve 1 partial drain valve on square flange Conical bottom 1 total drain valve 1 5-foot sludge Dimensions Diameter: 2500 mm Total height: 4800 mm Location: Civray Equipment sold loaded on truck: mandatory additional dismantling and loading fees apply to this lot. Au ...

225 hL (91 + 134 hL) – Pierre Guerin – Stainless steel 304 shell compartmentalized tank with sloping flat bottom Technical characteristics Brand Pierre Guerin Capacity: 134 hl + 91 HL Total capacity: 22,500 liters Material: 304 L Interior finish: raw cold rolling Exterior finish: brushed Roof 1 central chimney with stainless steel hatch DN 500 mm with clamping studs 1 50 Mâcon tap on chimney, internally / externally threaded 2 lifting rings Ferrule gangway support 1 rectangular stainless steel door 410 x 530 mm with external opening with mud flap 1 partial drain valve with stainless steel ball DN 50 with decanter elbow 1 stainless steel taster 8 turns of shell circuit1 stainless steel ball drain valve DN 50 Roof 1 chimney off-centre at the front with stainless steel hatch DN 500 mm with clamping studs 1 tap 50 Mâcon on chimney, threaded inside / outside Ferrule 1 recta ...

334 hL (96 + 238 hL) – Tec Inox – 304 stainless steel tank compartmentalized flat bottom 2% on a slab Vertical storage tank in TEC INOX stainless steel of 334 hL, divided into 2 independent compartments (96 hL and 238 hL). Previously used for wine storage, it allows several separate batches to be managed within the same tank. Technical data Brand: TEC INOX Total capacity: 334 hL (96 + 238 hL) Construction: 304 food-grade stainless steel Type: vertical compartmentalized storage tank Flat bottom with 2% slopeLayout : on concrete raft Previous use: wine Equipment per compartment 1 oval door stainless steel autoclave 310 × 420 mm 1 level indicator1 total emptying 1 partial emptying 1 stainless steel chimney Ø 200 mm Dimensions Total height: 6,000 mm Location: Bollène (84) Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to this lot. A ...

140 hL – Chalvignac – 304 stainless steel tank with conical bottom on legs 140 hL vertical stainless steel tank, designed for the storage, vinification and processing of liquid foodstuffs. Its conical bottom on 5 adjustable legs facilitates racking, total emptying and cleaning. Technical characteristics Brand: Chalvignac Total capacity: 14,000 litres Material: 304 stainless steel Configuration: vertical cylindrical tank on legs Roof 1 chimney 1 ladder support bar Ferrule 1 winding tube 1 thermometer 1 taster tap 1 tap and level ruler1 partial drain valve on square flange 1 rectangular door with external opening 1 total drain valve on square flange Bottom Conical bottom 5 adjustable feet Dimensions Diameter: 2,200 mm Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to this lot. Auction-ID: A1-51122-367

178 hL – Alfa Laval – 316L stainless steel tank with 2% sloping flat bottomALFA LAVAL 316L stainless steel tank with 178 hL, equipped for thermoregulation, ideal for storage and temperature management in the cellar. Its design with a 2% sloping flat bottom facilitates emptying and daily work, while maintaining a simple installation in the winery. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 17,800 litres Material: 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Conical roof 1 eccentric chimney at the front Ø 200 mm 1 thermometer Ferrule lifting rings1 oval door 310×420 mm 1 partial drain valve DN 65 1 level with tap Flat bottom inclined 2% with box 1 total drain valve with plug Dimensions Diameter: 2800 mm Ferrule height: 2800 mm Total height: 3500 mm Location: Civray Equipment sold loaded on truck ...

125 hL – Vautier – Stainless steel tank 304 flat bottom Technical characteristics Cylindrical vertical flat bottom closed Brand : VAUTIER Volume : 12 500 L Material : stainless steel 304 Roof Flat roof 1 central hatch Lifting rings Marcs sprinkler in addition 1 bolted footbridge, but half level welded Ferrule Rectangular door with external opening 550×430 mm Partial ball drain valve on square flange in MÂCON 40 Taster tap Ladder support bar Builder's plate Bottom Total ball drain valve on square flange in MÂCON 40 Flat bottom Dimensions Diameter: 2400 mm Height: 3400 mm Location: Monteux (84) Equipment sold loaded on truck: mandatory additional dismantling and loading fees apply to this lot. Auction-ID: A1-51122-264

289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...

289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...