bloc used for sale

Locking block for die casting machine GDK2500 by Frech, PADS1117.400, Parker, overhauled-as good as new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Refurbished! The locking block was overhauled by Parker, is in the original packaging and is in an immediately usable, top condition. The locking block can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Locking block, Parker, PADS1117.400, Suitable for the GDK 2500 machines from Frech/Müller Weingarten The block was still delivered to machines from Müller Weingarten and has SAE connections. Art. 937009 Weight 650kg Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D ...

Müro A4/5000 block size press; good condition; cleaned and tested; Heat baffle; Stack increase; optionally with dryer. Block gluing machine Müro A4/5000; good condition; cleaned and checked; pile elevation; heating sheet; for option with heater.

Key data: 150 KW, 220 kVA, 400 V

Sokratherm Gas-CHP GG 140S oE Gas electricity and heat generator from 2010, with approx. 60,000 operating hours, with control and silencer. 1 available 140 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: MarelliGenerators MJB 250 LA4, 220 KVA Manufacturer: Sokratherm Model: GG 140S oE Type: Gas CHP Serial Number: F103064 Engine: MAN E2876 E312 Electrical power [KWel]: 140 Thermal power [KWth]: 216 Gas capacity [KWgas]: 392 Year of Make: 2010 Operating hours: approx. 60,000 Weight unit [kg]: 2,850 Dimensions LxWxH [m]: 3.00 x 0.9 x 2.4 AC Generator Marelli MJB 250 LA4 Manufacturer: MarelliGenerators Model: MJB 250 LA4 Type: AC Synchronous Generator Serial Number: MJB2572GT68MO Power [KVA]: 220 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 317 Speed [1/min]: 1,500 Year of Make: 2010

blowers Müro block glue presses; Condition used; 2 pcs.; 1x old connector, 1x new connector; cleaned and checked for function. Heater Müro padding press; condition used; two pic.; one old connector, one with new connector; cleaned and checked on function.

Dimensions (L/W/H): 2800x1150x1950 mm Weight: 430 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete system for the comminution of frozen cheese blocks is available. 1) Lifting device Karl Schnell 605, use: lifting of transport trolleys, max. trolley volume: 300l, lifting height: 2380mm, lifting force: 3500N, lifting speed: 4.5m/min, machine dimensions X/Y/Z: approx. 3800mm/600mm/800mm, weight: approx. 600kg. 2) Frozen block shredder Karl Schnell 487, inlet height: 2485mm, outlet height: 737mm, opening width: 680mm, tooth width: 44mm, speed: 65rpm, motor power: 30kW, machine dimensions X/Y/Z: approx. 1800mm/1400mm/2700mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible.

Block size press Müro 5000/A4 WT; good condition; cleaned and tested; Heat baffle; Stack increase; with dryer. Block gluing machine Müro 5000/A4 WT; good condition; cleaned and checked; pile elevation; heating sheet; with heater.

Vacuum filler bloc Stork/Zalkin 32/8 with 32 filling valves and 8head screw capper running direction: from right to left with frequency inverter with safety housing for 0,2 - 1,0 ltr. bottles

Key data: 70 KW, 63 kVA, 400 V

HAATS Gas CHP G 50 K Gas electricity and heat generator from 1999 with unknown operating hours. 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA C44.1 M3, 63 KVA Manufacturer: HAATS Model: G 50 K Type: Gas CHP Engine: MWB 12 NA-K (Mercedes engine block) Serial Number: GS50-113VLFN03089901 Power [KW]: 76 Power [KWel]: 50 Year of Make: 1999 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 360 x 120 x 200 AC Generator Leroy Somer LSA C44.1 M3 Manufacturer: Leroy Somer Model No.: LSA C44.1 M3 Type: AC Synchronous Generator Serial Number: FF089446/02 Power [KVA]: 63 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 91 Speed [1/min]: 1,500 Year of Make: 1998 Weight [kg]: 315

Block production line HENKE - Type 140/100/40 - Board size 140 x 100 x 4.5 cm (all-plastic boards) - Control Siemens S5-115 U - uncl. 25 Molds Stone fabrication machine with facing & core concrete = Paving stones, kerbstones, kerbstones, U-stones, hollow blocks & solid block bricks can be produced - Min. product height 50 cm, max. product height 400 mm HENKE-Vibra-Matik vibration: infinitely adjustable Compaction by adjusting the imbalances - Waterjet system for product refinement, lifting ladder payload 10,000 kg, Transfer platform with skip carriage Board shelf: front track countersunk ladder, clearing lane, packager, board brush, board turning cross Rear track: Lore track, Euro pallet beaver, vertical & Horizental binding machine incl. packer and strapping system

The new band mill by Hauslhof is suitable for diameters up to 40 cm and has a good cutting accuracy. It is unlimited expandable with extension sections and can be set up and pulled down easily. CE certified Technical data: max. log diameter 650 mm max. board width 475 mm Engine power S6 6,5 kW (5,5kW S1) 400V Cutting length basic version 2950 mm Saw band length 3658 mm Saw band width bis 35 mm Belt speed 20 m/sec Cuttinglength extension section optional 1,95 m Weight 335kg Optional accessories: - Extension section extends the cutting length each 1,95 mm

This is a LOMA Systems IQ-series industrial metal detector, commonly used in food and dairy processing lines. Here’s a clear, practical breakdown of what it is and what it does., Its job is foreign body detection — specifically metal contamination — to protect:, - Product safety, - Equipment (pumps, fillers, valves), - Brand and compliance (HACCP, BRC, IFS, etc.), You’ll typically find these on:, - Dairy products (cheese, butter, powders), - Ready meals, - Meat & poultry, - Bakery, - Packaged foods on conveyors, What metals it detects, The IQ range detects all three common metal types:, - Ferrous (iron, steel), - Non-ferrous (brass, aluminium), - Stainless steel (the hardest to detect in food environments), Sensitivity depends on:, - Aperture size, - Product type (wet/dry, salt content), - Conveyor speed, - Calibration, The LOMA IQ control system, The LOMA IQ® controller you sho ...

Dimensions (L/W/H): 13000x1700x1700 mm Weight: 1950 kg Total power requirement: 13,5 / 17,5 kW kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 13000x1700x1700 mm Weight: 1650 kg Total power requirement: 10 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is an EPS block mold, manufacturer Erlenbach, year of construction 2008, 5000 mm x1300 mm x1000 mm, vacuum system, The system ran very well until the end. The facility can be visited by prior appointment

For sale is a Styrofoam block press manufacturer Wemhöhner, the press is in good condition and can be viewed by appointment. I will be happy to answer any further questions you may have.

Complete plant (production) for paving stones: Gravel feed Mixer Main Engine 844AZ Stacking system Strapping system

Prakma Book block gluing machine

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Spare part: hydraulic control block comes from an Atlantic press brake type: HPT 13536 -Manufacturer: Rexroth -Valve type: S-4WE 10 F32 CG24/9Z4 C -Manufacturer: Sauer Sundstrand -Valve type: D24 SWH-G02-B2- -20 -Voltage: V -Pressure max: bar -Price: for all 5 pieces of valves -Dimensions: 600/700/H600 mm -Weight: 67 kg

Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -DSB: Type UCP 211 bearing block -for: 55 mm shaft -Price: per piece -Number: 13 pieces -Dimensions: 220/60/H125 mm -Weight: 3.4 kg/piece

Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -SKF: Plummer block housing type SNH 509 -Inside diameter: 57 mm -Price: per piece -Number: 2 pieces -Dimensions: 204/86/H110 mm -Weight: 2.9 kg/piece

Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -FAG: Plummer block housing type SNV 140 -Price: per piece -Number: 4 pieces -Dimensions: 315/140/H185 mm -Weight: 9.4 kg/piece

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Rexroth, hydraulic control block from Fischer DHS 12 / 3000 guillotine shears -Type: 4 WEH 32 E 33 / 8LW 220-50 NET -Pressure relief valves: Rexroth type DBW 20 B 2-30 -Dimensions: 560/365 / H335 mm -Weight: 154 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Rexroth, hydraulic control block from Fischer DHS 12 / 3000 guillotine shears -Type: 4WEH 22 D 41 / 8LW 220-50 NET -Dimensions: 425/230 / H280 mm -Weight: 44 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Hydraulic control block comes from a TRUMPF Sunimat 400 punch press Manufacturer: Yuken -Valve type: MSW-01-X-30 -Valve Type: FHCG-02-30-N-A100-1004 -Valve Type: DSG-01-2B2-A100-5032 -Voltage: V -Pressure: max. bar -Dimensions: 340/290/H360 mm -Weight: 50 kg

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Manufacturer: Matrinor, load racks lashing points 4 pieces -Original use: aerospace industry -Payload: 9840 kg -Shackle mount: Ø 120 mm / M42 -Price: complete -Dimensions: 555/252 / H175 mm -Weight: 62 kg / pc.

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread, lashing point -Hersteller.RUD, Loadbock thread with foldable rotatable load bracket unused Ovp -Type: VLBG 5 t M 30 Ident-No .: 850 08 13 -Carton: content 4 pieces -Quantity: 12 cartons available -Price: per box -Weight: 15 kg / box

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Hydraulic control block comes from a Hitchi Seiki HC400 machining center -Manufacturer: Nachi-Fujikoshi -Valve type: SL-G01-E3X-GR-Ci-11 -Valve type: SL-G01-C5-GR-C1-11 -Voltage: 110 V -Pressure: max. bar -Price: for all 6 pieces of valves -Dimensions: 158/45/H84 mm -Weight: 1.5 kg

Plummer block housings, pillow block housings, pillow block housings, pillow block housing units, pillow block housing units, SKF pillow block housings, pillow block housing units -Manufacturer: SKF -Type: Bearing block SNL 213 -Bearings to be installed: Abbreviation -Quantity: 12x pillow block housings available -Price: per piece -Dimensions: 275/110/H150 mm/piece -Weight: 6.2 kg/piece

Plummer block housings, bearing blocks for shredders, crushers, water mills, chippers, cutting mills, granulators, and cutting granulators -Quantity: 1 piece heavy-duty steel pillow block housing -Type: Bearing block, inner diameter: 320 mm -Axis/Center of housing: 190 mm -with: shaft seal discs -Quantity: 1x bearing block available -Suitable for: Bearing abbreviations 22236/22330/23064/23138/23236, not included in the scope of delivery -Suitable for: Bearing abbreviations 22236K/22330K/23064K/23138K/23236K, not included in the scope of delivery -Dimensions: 560/190/H395 mm -Weight: 228 kg

Pass-through press for glued glue ITALPRESSE PL/9 Shelf length 3000mm Shelf width 1300mm Number of vertical cylinders 6 Pressure of 90t vertical cylinders Diameter of vertical cylinders 70mm Number of horizontal cylinders 6 Heating shelves with a high-frequency generator The line consists of: -Material feeding section -Glue application section -Material loading section -Press PL/9 -Material receiving table CE Certificate Line dimensions 740x770x235cmH Weight about 8000kg

Key data: 2000 KW, 2500 kVA, 10500 V

2x caterpillar 3520-C Unused genset! 0-Hours gensets are located in our warehouse for inspection adres: Kranenpool 10 6443VA Brunssum Netherlands check our website for more generators! generalpowerholland.nl +31681163153 what's app number

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: NCP Parker, control block with 12 solenoid valves -Magnet valve: Parker ZB16 12V DC 16W -Individual components: see photos -Dimensions: 230/215 / H130 mm -Weight: 5.5 kg

gebr. Stone Forming Machine/Board Paver, Manufacturer Zenith Type 860 AZ Production of core & attachment Simatic S5 control system with vitalization from Zenith Board size 1,400 x 950 mm max. production height 14 cm Quick Forming Clamping Pneumatic incl. complete circuit with: Aerial ladder Vehicle Group Drying rack Countersunk ladder Stone Remover Packager Board stacking transverse transport Board stacking device Board tray Parcel trolley circulation Parcel Magazine Horizontal strapping

Block size press Müro A3 2000/TM; cleaned and tested; Tabletop device; 2 dryers; insertion width 525mm; Insertion height 200mm. Pading press Müro A3 2000/TM; cleaned and checked; two heaters; working width 525mm; working hight 200mm.

Power converter, power supply, power supply, switching power supply, medium voltage switchgear, switching device, medium voltage switching device, switchgear block, secondary switchgear -Manufacturer: Ormazabal, switchgear block type GAE630 1M5-9 -Rated voltage: up to 24 kV -Rated current: up to 630 A -technical Data: see photo of nameplate -Individual components: see photos -Quantity: 2 pieces available -Price per piece -Dimensions: 850/755/H1995 mm -Weight: 414kg

Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Promecam, hydraulic control block from press brake Promecam STPC 250 40 121 -Control valve: Abex Denison S16-92489 / 026 20324 / S16-39303 / S26.20456 2-way cartridge valves: Bosch 0 810 060 700 -Individual components: type / number see photos -Dimensions: 875/560/H400 mm -Total weight: 204 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: IWN RMD-53/44 / BVB-F 25/40-1 / PMV-DR 20/40-P -Individual components: see photos -Total dimensions: 450/250/H330 mm -Weight: 13.5 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Valves: airtec MS 01 / airtec MO 04 310-HN -Valves: IWN PMV-D 40/40-BL / PMV-D 25/32-BL / BVB-S 25/40-1 -Individual components: see photos -Total dimensions: 500/420/H185 mm -Weight: 18,7 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: PMV-D 25/32 BL / PMV-D 40/40 BL -Individual components: see photos -Total dimensions: 440/380/H230 mm -Weight: 11.3kg

4/3 directional valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Krämer Grebe Control block from Tiromat 3000/430 vacuum packaging system -Valves: PMV-D 40/40 BL / PMV-D 25/32-BL / BVB-S 25/40 -Individual components: see photos -Overall dimensions: 500/460/H190 mm -Weight: 19 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, digital output, electronic block -Manufacturer: Siemens, Simatic S7 electronic block ET 200L ovp -Type: 6ES7 133-1BL01-OXBO -Cardboard dimensions: 150/70/H65 mm -Weight: 0.2 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, digital output, electronic block -Manufacturer: Siemens, Simatic S7 electronic block ET 200L -Type: 6ES7 131-1BH12-OXBO -Cardboard dimensions: 150/70/H65 mm -Weight: 0.2 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, digital output, electronic block -Manufacturer: Siemens, Simatic S7 electronic block ET 200L ovp -Type: 6ES7 131-1BH01-OXBO -Cardboard dimensions: 150/70/H65 mm -Weight: 0.2 kg

Block flame cutting nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxyfuel cutting system -Designation: Block nozzle A 40 - 60 mm -Cutting range: 40 - 60 mm -Pressure: 4 - 5 bar -Diameter: 20mm -Length: 64mm -Number: 3 pieces available -Price: complete -Total weight: 0.3kg

Block flame cutting nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxyfuel cutting system -Designation: Block nozzle A 40 - 60 mm -Cutting range: 40 - 60 mm -Pressure: 4 - 5 bar -Diameter: 20mm -Length: 64mm -Number: 3 pieces available -Price: complete -Total weight: 0.3kg

Hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyooki, hydraulic control block from CNC machining center Santenberg GTC S 2 -Control valves: HD-2WD-BcA-025A-WY3 -Pressure reducing valve: HG3H-P-D3-025Y -Check Valve: HK3H-P-Q1-025Y -Individual components: see photos -Delivery/price: complete -Dimensions: 255/185/H250 mm -Total weight: 12.7 kg

Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyoki, hydraulic control block from CNC machining center Santenberg GTC S 2 -Control valves: HD3-2W-BcA-025AY-WYD2 / HD3-2WD-BcA-025A-WYD2 -Pressure reducing valve: HG3H-P-D3-025Y -Check Valve: HK3H-P-Q1-025Y -Individual components: see photos -Submission/Price: complete -Dimensions: 300/135/H250 mm -Weight: 14.8 kg

Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve, hydraulic distributor block, hydraulic distributor, block distributor -Hydraulic distributors: Hydraulic distributor block from CNC machining center Santenberg GTC S 2 -Individual components: see photos -Submission/Price: complete -Dimensions: 300/210/H190 mm Total weight: 8.4 kg

Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyoki, hydraulic control from CNC machining center Santenberg GTC S 2 -Pressure switch: Parker Senso Control SCPSD-016-14-15 -Control valves: coax 5-VMK 32 NC / 1 824 210 291 -Individual components: see photos -Submission/Price: complete -Dimensions: 340/145/H510 mm -Total weight: 14.7 kg