bloc used for sale

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roller height: 850 - 1500 mm adjustable -Roll: Ø 80 x 840 mm -Plate below: Ø 480 mm -Price: per piece -Number: 2 pieces -Dimensions: 915/480/H850 mm -Weight: 44 kg/piece

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roll width: 295 mm -Dimensions: 480/420/H845 mm -Weight: 12.8 kg

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roll height: 735 mm -Roll width: 400 mm -Dimensions: 420/430/H735 mm -Weight: 46 kg

Contact expansion block, safety relay -Type: PZE X4 24VDC 4n/o -Number: 76x shooters available -Price: per piece -Weight: 0.2 kg/piece

Machine a blocs mobile Contec SP 5 pour la fabrication des blocs, hourdis, blocs U, pavee, bordures, blocs mur etc. Max hauteur de produit 300 mm Min hauteur de produit 100 mm surface travaillant max. 1000 x 500 mm Capacité: jusqu´a 3.500 blocs 400 x 200 x 200 mm / 8-heures poste de production

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 475 mm adjustable -Roll width: 280 mm -Dimensions: 380/380/H480 mm -Weight: 64 kg

Pneumatic cylinder holder, bearing block, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: LSN-160 -Weight: 6 kg

Bearing, ball bearing -Condition: unused -Diameter: Ø 35 mm -Number: 9x bearing blocks available -Price: per piece -Weight: 1.3 kg/piece

Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributo -Hydraulic fitting: T-distributor 2 1/2 -Type: 3000-2 1/2-76.1 A3L -Number: 6x distributor block available -Price per piece -Total dimensions: 235/120/H160 mm -Weight: 17 kg/pc.

complete 230kW

We offer a Liebherr G944 for sale.

We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne

We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model code: Valves 4070... see photos -Dimensions: 340/300/H400 mm -Weight: 40 kg

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model Code: Valves 4070... see photos -Dimensions: 340/300/H160 mm -Weight: 38 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering valve, control block, steering motor -Manufacturer: Sichelschmidt, control block from electric forklift M 1510 V -Base block: Hawe SK 7650-HST3-Rö4 -Dimensions: 210/110/H130 mm -Weight: 4.2 kg

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; heat deflector; Stand-standing device. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

RECON Part number: 524 011 26 01 #524100554 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate -Manufacturer: SiB, hardness reference block test block -Type: 199HBW 5/750 -Dimension box: 180/170/H35 mm -Weight: 1.4 kg

Plummer block housings, bearing blocks -Condition: unused -Quantity: 4 pieces bearing block with bearing -Type bearing block: NTN 320 - Bearing type: UC320 -with shaft seal -Bearing: Ø 100 mm -Number: 4x available in storage -Price: per piece -Package dimensions: 550/340/H240 mm -Weight: 43 kg

with 14 shapes with 14 Forms

SUMAB R 400 Für Blöcke, Bordsteine, Pflastersteine Produktionsfläche: 1100x500mm Palettengröße: 1200x550 mm Maximale Produkthöhe: 330 mm Mindestprodukthöhe: 40 mm Produktionskapazität in 8 Stunden / 100 %: Hohlblock: 6.912 Stück (20x20x40 cm) Pflasterstein: 550-640 m2 (10x20x6 cm) SUMAB R 400 For blocks, curbstones, pavers Production area: 1100x500mm Pallet size: 1200x550 mm Maximum product height: 330 mm Minimum product height: 40 mm Production capacity in 8h / 100%: Hollow block: 6,912 pieces (20x20x40 cm) Paving stone: 550-640 m2 (10x20x6 cm)

Our company currently offers the R-1000 stationary concrete block machine. The SUMAB R-1000 is one of the most technologically advanced machines on the market! A giant among all block machines! Real money maker! Using a SUMAB R-1000, you can produce the following products: • Empty blocks • Curb stones • Paving stone • Tiled stone Technical details: • CAPACITY - 1000 m2 pavers per shift. • BLOCKS 20X20X40 18000 pieces/8 h Scandinavian quality and good prices! Contact us for pricing and technical specs! We will provide you with the best solution for your business projects!

Our company offers the SUMAB E-12, which is a movable concrete block machine. The E-12 is a block machine that uses a technique known as egg laying,” where the block machine moves and produces concrete block products on the ground to dry – We offer the machine in fully/semi-automatic modes. With the SUMAB E-12, the following concrete products can be produced in an efficient way: • Hollow block stones • Solid block stones • Chimneys • Light weight blocks • Paving stones [with vibration table option] additional option Production capacity: For hollow blocks 400 x 200 x 200 mm ………. 1.200 blocks/h. For hollow blocks 400 x 200 x 120 mm ………. 2.000 blocks/h.

Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location

Niemeyer shaft base paver for lower parts 1100 mm incl. many accessories such as moulds, base sleeves, rotating device, spare parts, from location, immediately available

Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location

Hydraulic 20 T single-stand production press for the production of lightweight concrete parts Here are the technical data of the offered machine: If the press does not exactly meet your requirements profile, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Open maximum height 300 mm d) Pressing speed 4 – 10 mm/sec. ( adjustable via rotary knob ) e) Mould size 600x800 mm f) Plunger size950x600 mm g) Manual lubrication( via lubrication nipples ) h) Pressure setting from 5 T to 20 ( adjustable via rotary knob ) i) Travel 300 mm j) Construction, commissioning, instruction against separate calculation  ...

clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block -Step block: clamping pad for clamping tool, 2 pieces -Clamping width: 50 mm -Price/Delivery: complete -Dimensions: 120/60/H140 mm -Weight: 1.9 kg/piece

clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block -Step block: clamping pad for clamping tool, 4 pieces -Clamping width: 50 mm -Bore: Ø 30 mm -Price/Delivery: complete -Dimensions: 100/60/H45 mm -Weight: 1.0 kg/piece

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 240 mm / 120° / 3 holes Ø 7 mm -Dimensions: see photo technical drawing -Dimensions: 225/257/H90 mm -Weight: 25.4 kg

Filling and closing Bloc BKM type: Varifill VF 32/8 PET with 32 filling valves and 8 head plastic screw capper with pick-and-place system year of manufacture: 2001 with Siemens S7 electric incl. Touch Panel with neck-handling system

We hereby sell a valve block from Bosch/Rexroth It is best to find all the necessary information from the attached pictures. Of course, please do not hesitate to contact us if you have any further questions. Yours sincerely,

load jack, swivel jack, lifting jack, shackle, load jack, lashing eye, lashing ring, attachment point, load jack thread -Load trestles: lashing point -Shaft mount: M42 -Hole spacing: 220/140 x Ø17 mm, see photos -Quantity: 1 piece -Dimensions: 280/190/H200 mm -Weight: 19.9 kg

Container turning device, welding turning device, roller stand -Roller stand: wheels Ø 125 x 35 mm -Roller spacing: 140 mm -Quantity: 1 piece available -Dimensions: 350/80/H170 mm -Weight: 6.6 kg

Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

for milling chucks, spindle head, tool holder, tool carrier -Manufacturer:Diebold, assembly block for assembling and disassembling tool combinations -Arrangement: vertical and horizontal -Mounting: SK40 -Dimensions: 275/160/H180 mm -Weight: 10.5 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 -Mounting: Hole spacing 170 mm / M16 -Dimensions: see photos -Dimensions: 200/65/H130 mm -Weight: 8.4 kg

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RT2024-1BB40 -Number: 4 switches available -Price: per piece -Dimensions: 85/45/H110 mm -Weight: 0.6 kg/piece

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2011-1GA10 -Number: 2x switches available -Price: per piece -Dimensions: 100/45/H100 mm -Weight: 0.4 kg/piece

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2411-1EA15 -Number: 2x switches available -Price: per piece -Dimensions: 100/45/H100 mm -Weight: 0.4 kg/piece

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2021-4EA10 -Number: 1x switch available -Dimensions: 100/45/H100 mm -Weight: 0.4 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2015-1BB41 -Number: 1x switch available -Dimensions: 60/45/H75 mm -Weight: 0.3 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, power switch, power contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RT2015-2BB41 -Number: 1x switch available -Dimensions: 70/45/H105 mm -Weight: 0.3 kg

Concrete block production plant complete Fabr. Locksmith type SP 3000 with core and attachment control Siemens S 7 Lifting ladder, vehicle group, racking system, sinking ladder, packer, strapping mixing plant various accessories. The plant is still in operation and can be visited in consultation with us.

SUMAB R-500 MAX Fully automatic block line with concrete batching plant. Block line is in stock and ready for delivery! Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm)

Weibert WBBS 550 Log band saw The drive is via a 9kW petrol engine trunk diameter 555mm board width 530mm band saw blade stroke 540mm Min band saw blade stroke 20mm cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Wheel-D: 400mm Impeller width: 25mm Band saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-550-BEN Optional: Extension section 2.3m Aspirator Slewing timber bar: length 4,6m

Locksmith SP 3000 Complete concrete block production plant Schlosser SP 3000 Lifting ladder Lowering ladder vehicle group Dry rack Packager Strapping Underlay boards Plastic More information on request. The plant is still in operation and can be visited in consultation with us,