bl used for sale

TECHNICAL DATA: Belt width: 250 mm Axle: Ø 60 mm Saw blade: Ø 250 mm Processing height: max. 100 mm Feed with 2 speeds (0.6 kW) Installed power: 15 kW EQUIPMENT: Miscellaneous accessories

Offer 26206 Technical data: - 2 blasting rooms - Blast room width / blast room depth 600 / 940 mm each - Workpiece access through side doors - 2 hinged viewing windows 400 x 250 mm - 2 pieces of blasting guns - 2 pieces E. footswitch - Blasting material recovery - Dedusting system with cartridge filter - Drive 400 V / 3 kW - Pneumatic connection 6 bar - Space requirement approx. W 1500 x H 2200 x D 1600 mm - Weight approx. 350 kg

Length 250 mm, width 8 mm/ including corresponding bracket SBN3229-46-K; square mount 32 mm Auction-ID: A1-49785-189

Features: Brand new never used 4-block capacity Grant-Bio with QBE2 dry heating block systems Auction-ID: A1-50093-112

Quantity: 2 Auction-ID: A1-50093-192

25 meters red + 25 meters black solar cable 4mm2 + Dc Plugs for solar panels 4 x male plug and 4 x female plug Condition: Unused Auction-ID: A1-46377-49

Auction-ID: A1-50093-79

Quantity: 2 Auction-ID: A1-50093-191

25 meters red + 25 meters black solar cable 4mm2 + Dc Plugs for solar panels 4 x male plug and 4 x female plug Condition: Unused Auction-ID: A1-46377-58

Vial blow blower Manufacturer: Hispamec Model: S1 Year: 1995 Installed format: 20 ml bottles (25 mm slot width) Inlet and outlet conveyor width: 60mm Conveyor height from the ground: 1000mm 16-slot blowing wheels Throughput: 1000 to 2500 cycles per hour Telemechanical PLC Dimensions (W x D x H): 4160 x 960 x 2060 mm Power: 3x380V+N+T, 50Hz, 1kW Documentation: available, in French Auction-ID: A1-50259-17

UCT/ UCF/ UCFC/ and so on; unused and in original packaging Auction-ID: A1-49785-380

Features: Living Systems Instrumentation, including a Pressure Servo Controller (Model PS-200-S with Pressure Control Unit and Peristaltic PumpModel PS-200-P) and associated pressure monitors (Pressure Monitor Model PM-4). Auction-ID: A1-50093-247

VIGNETEUSE NERI Manufacturer: NERI (MARCHESINI GROUP) Model: BLB400V2T Year: 2010 Serial Number: N3090069 Description: equipped with 2 heads (1 on the top + 1 on the bottom) Characteristics: 400 V / 3 PH+N+PE / 50 Hz; 7 A. Overall dimensions: APPROX. 2500 x 2000 x 2250 (W x D x H; in mm) Weight: 1000 (in kg) Auction-ID: A1-50259-11

Specifications: 730009-B-44 Auction-ID: A1-50093-63

25 meters red + 25 meters black solar cable 4mm2 + Dc Plugs for solar panels 4 x male plug and 4 x female plug Condition: Unused Auction-ID: A1-46377-44

Characteristics : Capacity Blood bags: 48 - Drawer capacity Blood bags: 6 Dimensions: W x H x D (cm): 44.8 × 25.9 × 38.1 Auction-ID: A1-50093-111

Blister Proofing Machine Manufacturer: Marchesini Model: BA400 Year: 1990 For Blisters Output: 400 cartons/minute (manufacturer's data) Carton format: • A = 25 – 70 mm • B = 13 – 70 mm • H = 80 – 200 mm Guk Instructions Folder Installed power: 6 kW Overall dimensions (W x D x H): 3250 x 1450 x 1475 mm (manufacturer data) Tested and functional used cartoning machine Sold EXW Auction-ID: A1-50259-32

Lifting height: 850mm; Includes: 20 matching dollies with a capacity of 150 kg, dimensions: 600x400x160mm Item number: Z201357; including 20 stackable plastic baskets. Size: 445x380mm Auction-ID: A1-49785-366

Lifting height: 850mm; Includes: 20 matching dollies with a capacity of 150 kg, dimensions: 600x400x160mm Item number: Z201357; including 20 stackable plastic baskets. Size: 445x380mm Auction-ID: A1-49785-365

Slough remover Manufacturer: RBP BAUER Model: D3600 Year: 2003 Serial Number: ONB 312-599 B Throughput: 60 blisters/minute Size range: blister width 30 to 150 mm, length 40 to 120 mm Overall dimensions (W x D x H): 550 x 1100 x 1530 mm Weight: 100 kg Technical documentation: user manual, maintenance file, electrical diagram, pneumatic diagram, CE certificate CE compliant Incoterm: FCA Auction-ID: A1-50259-7

Case Packer Manufacturer: ID'PACK Model: Blister packaging machine Year: 2007 Serial Number: 1788 For Blisters Module for cartoning, labelling, weighing and checking cartons. Nordson PROblue 4 Bonding Group Control panel: Siemens Simatic Panel Touch PLC: Siemens Simatic S7-300 Power supply: 400 V 3-ph + N + T Power: 22 kW CE compliant Machine overall dimensions (W x D x H): 4950 x 1960 x 2200 mm Weight: 4000 kg Technical documentation: available, details on request Incoterm: EXW Auction-ID: A1-50259-13

Auction-ID: A1-40898-406

Benson Foldable Wagon - Handcart Foldable - Max. 90kg - Black Auction-ID: A1-40898-250

Used PLASTIBLOW PB1H-D blow molding machine - Year 2008Technical Specifications & Performance DataThe Plastiblow PB1H/D is a used industrial blow molding machine designed for producing plastic bottles through extrusion blow molding. Built in 2008, this double-carriage machine is configured with a single extrusion head and is suitable for manufacturing two 1.0L bottles simultaneously. It is a practical solution for manufacturers seeking second hand industrial packaging equipment for bottle production.Manufacturer: PlastiblowModel: PB1H/DYear: 2008Speed: 1L format 600/700 bottles/hour ( 2 cavity mold) Configuration: Double carriage, single headProduction configuration: 2 bottles of 1.0L produced simultaneouslyElectrical supply: 400V, 50HzExtruder configuration marking: E50/26Conformity marking: CEAdvanced Automation & Control SystemsThe machine is equipped for operation on a 400V, 50Hz ele ...

This machine is delivered without battery and charger. The Makita UB002GZ01 is the ultimate addition to your tool arsenal when vacuuming is just not enough. This powerful 40V Max XGT cordless leaf blower offers three settings – high, mid and low – so you can always choose the right blowing power, from coarse dirt to fine dust particles. Thanks to the ergonomic design, you can work comfortably in an upright posture, without straining your back. The rubber discharge nozzle prevents electrical conduction and thus contributes to extra safety at the workplace. In addition, you can also use this blower as a vacuum cleaner with an optional dust bag, which makes it even more versatile. With a runtime of up to 192 minutes on the lowest setting (when using a 4.0 Ah battery), this tool is ideal for long-term, efficient cleaning without interruptions. (body) Auction-ID: A1-40898-1015

Auction-ID: A1-40898-249

Milwaukee M18 BLH-0 Battery combi hammer SDS-Plus 2.3J 18V Basic Body Please note: this product is a body and will therefore be delivered without battery and charger. Auction-ID: A1-40898-18

Benson Foldable Wagon - Handcart Foldable - Max. 90kg - Black Auction-ID: A1-40898-407

A distribution block comes in handy in every workshop. With a distribution block, you immediately ensure that you can easily connect multiple electrical devices and the power grid. With a distribution block, you choose an alternative to electrical cables or busbars. This model (earthed) has a cord with a length of 180 cm and is also equipped with the IP protection class IP44. A similar distribution block Schuko type E with pin earth can be ordered here HBM 2 x 400 Volt and 4 x 230 Volt distribution block Auction-ID: A1-40898-32

You must have the right electricity supplies for work. But if the nearest power point only supplies three-phase current, this is not always optimal. Especially when there are no other sockets nearby. The HBM 3 x 400 Volt and 4 x 230 Volt distribution block - earthed splits the power over multiple plugs, so you can connect equipment with different voltages. This distribution block is intended to distribute power current. Due to its IP value, the power strip is suitable for bathrooms and other sanitary areas, but also as an outdoor electricity supply placed directly against buildings. This way you always have power to work with multiple types of power tools at the same time. Just because of its versatility, this distribution block is always handy to have. Auction-ID: A1-40898-118

Cutting capacity: Has a cutting width of 10-430 mm and a cutting height of 10-300 mm. Design: Equipped with a blade with 4 cutting edges. Weight: The block cutter weighs 66 kg. Auction-ID: A1-40898-199

Milwaukee M12 BPRT-0 12V LI-ION battery Blind rivet pliers With the Milwaukee M12 BPRT-0 12V LI-ION battery Blind Rivet Pliers, you can fix rivets in one turn with 20.32mm stroke length. The nose pieces are sure to grip any rivet and let you work overhead or in a corner without fiddling. The pulling force of 9000N gives you control with aluminum and steel and stainless steel and copper up to 4.8mm. The M12 system with REDLITHIUM technology keeps the performance stable and you can get up to 325 rivets of 4.8mm with a 2.0Ah battery. You can clean the jaw quickly thanks to tool-free access and the attachments are neatly stored internally along with four mounting clips. The built-in fuel gauge and LED lighting keep visibility and planning sharp and the ergonomic design of 273mm high and 66.8mm wide allows you to work comfortably for longer. The collection tray keeps broken pins together and  ...

This machine is delivered without battery and charger. The Makita UB002GZ01 is the ultimate addition to your tool arsenal when vacuuming is just not enough. This powerful 40V Max XGT cordless leaf blower offers three settings – high, mid and low – so you can always choose the right blowing power, from coarse dirt to fine dust particles. Thanks to the ergonomic design, you can work comfortably in an upright posture, without straining your back. The rubber discharge nozzle prevents electrical conduction and thus contributes to extra safety at the workplace. In addition, you can also use this blower as a vacuum cleaner with an optional dust bag, which makes it even more versatile. With a runtime of up to 192 minutes on the lowest setting (when using a 4.0 Ah battery), this tool is ideal for long-term, efficient cleaning without interruptions. (body) Auction-ID: A1-40898-1039

Milwaukee M12 BLDDRC-0 Battery Drill 12V Basic Body Auction-ID: A1-40898-219

Senco Accessories TD68APBE strip nails Type TD 4.6 x 145 blank Sencote 24° Smooth 500 Pieces Auction-ID: A1-40898-138

For e.g. Festool plunge saw, Detail: 1 x 160 x 2.2 x 22 mm. - 24 teeth, 1 x 160 x 2.2 x 22 mm. - 36 teeth, 1 x 160 x 2.2 x 22 mm. - 48 teeth. Circular saw blades set 3 -piece 160mm for e.g. festool plunge saw Auction-ID: A1-40898-77

Toolpack tool bag with Bluetooth speaker Material: 600D Polyester Color: Black-gray Weight: 1,100g Dimensions: 330 x 250 x 250mm including Wireless speaker (model C6) input from DC-5V/600mA output of 5W Frequency 120Hz-22KH Size: 87x45x95mm Auction-ID: A1-40898-156

Cutting capacity: Has a cutting width of 10-430 mm and a cutting height of 10-300 mm. Design: Equipped with a blade with 4 cutting edges. Weight: The block cutter weighs 66 kg. Auction-ID: A1-40898-262

A distribution block comes in handy in every workshop. With a distribution block, you immediately ensure that you can easily connect multiple electrical devices and the power grid. With a distribution block, you choose an alternative to electrical cables or busbars. This model (earthed) has a cord with a length of 180 cm and is also equipped with the IP protection class IP44. A similar distribution block Schuko type E with pin earth can be ordered here HBM 2 x 400 Volt and 4 x 230 Volt distribution block Auction-ID: A1-40898-166

Benson Foldable Wagon - Handcart Foldable - Max. 90kg - Black Auction-ID: A1-40898-408

Powerplus Electric leaf blower POWEG4030 - 3300 W Electric leaf blower - maximum air speed 250 km/h - garden tool Auction-ID: A1-40898-58

Milwaukee M12 BLDDRC-202C Cordless drill driver 12V 2.0Ah in case 1x Milwaukee M12 BLDDRC drill 1x Milwaukee M12B2 2AH battery 1x Milwaukee C12C battery charger 1x Milwaukee suitcase Auction-ID: A1-40898-1006

Used SIDEL PET Blow molding machine - Year 2010Technical Specifications & Performance DataThis Sidel PET blow molding machine, model SBO10, is designed for the rotary stretch-blow molding of PET bottles from preforms. Manufactured in 2010, the machine is configured with 10 cavities and has a stated production capacity of 14,000 bph. The Ø28 1881 neck finish is specified for the installed mold and preform configuration.Manufacturer: SidelModel: SBO10Year: 2010Production capacity: 14,000 bphNumber of cavities: 10Preform neck finish: Ø28 1881Blower footprint: 8,900 mm length x 3,200 mm widthInstalled power: 306 kWMain electrical supply: 3 x 400 V, 50/60 HzMaximum current: 452 AAdvanced Automation & Control SystemsThe machine operates from a 3 x 400 V electrical supply and is specified for 50/60 Hz operation. A 24 V remote-control circuit is indicated. Its electrical installation includes  ...

CONTROLS   electronic controls PRESS DESIGN   number of suspensions: 2   opening in table: yes PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 550 mm   table surface (front-back): 450 mm SLIDE   slide force: 45 to   table surface (left-right): 550 mm   table surface (front-back): 360 mm   stroke: 50 mm   stroke rate (max.): 400 /min SLIDE (MECHAN. PRESS)   slide adjustment: 50 mm   stroke min.: 10 mm   stroke max.: 50 mm   stroke rate (min.): 80 /min   stroke rate (max.): 400 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 305 mm Grid 2016 Completely Overhauled

II. Option, defective Auction-ID: A1-50256-1231

Auction-ID: A1-50256-329

With this cool electric 800 watt children's room, the little ones can have a lot of fun in silence. Models may differ in color and shape slightly from the photos due to new model. Auction-ID: A3-46164-5690

Set of 17 BLICKLE fixed and swivel castors, SPO series. 7 fixed castors and 10 swivel castors Nylon castors with BLICKLE Extrathane tyres Solid grey cast iron wheel Diameter: 200 mm Width: 50 mm Load capacity: 900 kg per wheel Auction-ID: A1-49938-52

Auction-ID: A1-50275-8

Auction-ID: A1-50256-330