128,430 used machines on RESALE, but how to find them? Machine Search
Key data: 2400 KW, 400 V
CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...
2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-45902-320
12v connection; 36l/min; 22A; 260W; Auction-ID: A1-45902-705
12v connection; 36l/min; 22A; 260W; Auction-ID: A1-45902-704
\" Manufacturer: Mitutoyo Version: Gauge blocks in wooden box Standard: metric Condition: used, box and blocks with signs of use Note: Set not complete Mitutoyo Gauge block in wooden box. The set comes from industrial use and is in used, functional condition. • Manufacturer: Mitutoyo • Design: Gauge blocks (block set), metric • Material: steel • Storage: original wooden box \" Auction-ID: A7-46417-152
\" Adjustment / length measurement set – steel – 200–400 mm – in a wooden case Adjustment / length measures made of steel, stored in a sturdy wooden box. • Type: Adjustment dimensions / length dimensions / parallel dimensions • Material: steel • Quantity: 4 pieces • Lengths: • 200 mm • 250 mm • 300 mm • 400 mm • Holes: available (easy handling)\" Auction-ID: A7-46417-156
\" Steel gauge block set from HOLEX in Grade 2 version for length testing, calibration and adjustment of measuring equipment. The final dimensions are housed in an original wooden box. The set is used and incomplete, the missing gauge blocks are listed below. Condition: • Used • Measuring surfaces mostly clean, no gross damage recognizable • Slight signs of wear on individual gauge blocks possible • Wooden box with age and use traces of use • Set incomplete (3 gauge blocks are missing) Missing gauge blocks: • 60 mm • 1.4 mm • 1.0 mm Scope of delivery: • Gauge block HOLEX, steel, grade 2 (incomplete) • Original wood box • Manufacturer: HOLEX • Design: Gauge block • Material: Steel • Accuracy class: Grade 2 • Reference temperature: 20 °C • Max. nominal dimension: 100 mm • Standard: ISO/DIN Gauge blocks (Grade 2) \" Auction-ID: A7-46417-53
\" Manufacturer: Mitutoyo Version: Gauge blocks in wooden box Standard: metric Condition: used, box and blocks with signs of use Note: Set not complete Mitutoyo Gauge block in wooden box. The set comes from industrial use and is in used, functional condition. • Manufacturer: Mitutoyo • Design: Gauge blocks (block set), metric • Material: steel • Storage: original wooden box \" Auction-ID: A7-46417-153
2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-45902-318
2x boxes; Blue tube for air and brake fluid Auction-ID: A7-45992-146
Gauge block set / Parallel gauge blocks – 87 pieces, quality class 1, in wooden box condition • Used • Optically good, neat condition • Gauge blocks clean without recognizable damage • Calibration sticker available (visual inspection) • No current calibration certificate available • No current metrological test carried out • Type: Gage Blocks • Quantity: 87 pieces • Quality class: Grade 1 • Reference temperature: 20 °C • Material: Steel (ground, lapped) • Measuring range: 1 mm – 100 mm • Pitch / gradation: • Fine grading in the lower range • Supplementary final dimensions up to 100 mm • Serial number: 057414 • Standard: Industry-standard final dimension (comparable to DIN / ISO) Auction-ID: A7-46417-82
\" Manufacturer: EROWA Type: ITS Electrode Holders / Clamping Blocks / Electrode Holders EROWA ITS Electrode Holder Set – 38 pieces Large lot consisting of a total of 38 electrode holders and clamping blocks for the EROWA ITS clamping system. The holders are used to pick up and position copper or graphite electrodes in tool and mould making on die-sinking EDM machines. The lot includes various designs such as electrode holder base bodies, clamping blocks and holders for individual electrode production. Compatible with EROWA ITS clamping systems and corresponding chucks. • Manufacturer: EROWA • System: ITS clamping system • Application: die-sinking EDM (EDM) • Number of parts: 38 pieces • Material: brass / steel • Origin: Switzerland • Condition: used, good condition \" Auction-ID: A7-46417-400
2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-45902-321
\" Gauge Block / Parallel Gauge Blocks - 87 pieces - Grade 2 - in wooden case - complete Complete Gage Blocks with 87 individual gauge blocks, neatly sorted in original wooden storage box. Condition • Gauge blocks with slight surface and handling traces typical of use, no chipping or recognizable damage to measuring surfaces • Wooden box with scratches due to age and use • All gauge sizes sorted appropriately and complete • Type: Parallel gauge blocks / gauge block set • Number of gauge blocks: 87 pieces • Accuracy class: Grade 2 • Reference temperature: 20 °C • Measuring range: • 1.001 – 1.009 mm • 1.01 – 1.49 mm • 1.5 – 9.5 mm • 10 – 100 mm • Material: Steel (classic version) • Serial/set number: LS 7121 • Condition: used, technically good, complete • Storage: sturdy wooden case with lock\" Auction-ID: A7-46417-155
\" 3x gauge block connectors (gauge blocks) from 125 mm incl. lot of single gauge blocks and extension set Mixed lot consisting of three gauge gauge connectors (single) incl. gauge extension and one lot of single gauge blocks. Article description according to the packaging: \"Gauge connector, simple; for gauge blocks from 125 mm\" Art.-No.: 317.131 Design: • 3x gauge gauge connectors / clamping connectors (marking EMC 05) • For gauge blocks with connecting bore (from 125 mm) • Gauge extension for connecting gauge blocks without bore • Knurled screw design for force-fit connection Design: Gauge connector, single Suitable for: Gauge blocks from 125 mm Connection: mechanical clamping connection with knurled screws Extension elements: 10 / 15 / 20 / 25 / 30 mm \" Auction-ID: A7-46417-332
(4×) Heavy Clamping Blocks / Clamping Clamps + Accessories Bundle of four solid clamping blocks for machine tools (lathes, milling machines, machining centres). Suitable for fixing large or heavy workpieces. Scope of delivery: 4× clamping blocks made of quenched and tempered tool steel Accessory box with numerous clamping screws, nuts and T-slot nuts Condition: typical for use, functional, no visible damage to spindles or clamping surfaces Dimensions of a clamping block Length: approx. 340 mm Width: approx. 260 mm Height: approx. 150 mm Auction-ID: A7-46417-1
2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-45902-319
\" V-prism set with magnetic V-block – Eclipse – for measuring and fixture work 4-piece V-prism set for use in the measuring room or toolmaking. Included: • 1x Magnetic V-Block, Eclipse (England), ON/OFF switchable • 1x Large Solid V-Prism • 1x Long V-Support Prism • 1x Small V-Prism \" Auction-ID: A7-46417-311
\" MASSI Prism and Clamping Block Set – 3 Pieces – for Round Material / Measuring Station Included: • 2 Solid Cross Prisms (heavy version) • 1 MASSI Step Prism 62 mm (No. 0/238) • 1 Clamping Bracket \" Auction-ID: A7-46417-310
Air-controlled cellar unit of the DUOMAT type series, which can be used both in the storage cellar for filter and storage tank charging and in the pressure tank cellar for filler charging. Due to its automatic switching and venting system, the device replaces the manual changeover work of a conventional blending apparatus and thus provides maximum safety and simplification in cellar work. Features: Collecting lantern, two pneumatically operated disc valves for the tank connections, disc valve for manual operation, pneumatic switching pulse generator in connection with float system, control manometer, venting valves on the lantern cover, two additional valves on the inlet connections. All pneumatic elements, compressed air filter with water separator, acoustic signal, control buttons are housed in small stainless steel control cabinet., Additional title: one lantern, Voltage: 220 V, Frequ ...
\" Complete metric gauge block set with 87 gauge blocks, consisting of: • F grading 1.001 – 1.009 mm • Further gradings 1.01 – 1.49 mm • Additional dimensions 0.5 / 1 / 1.5 / 2 / 2.5 / 5 mm • Longer gauge blocks 10 / 20 / 30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 mm Condition: • Used, very neat condition • Measuring surfaces clean, without rust or chipping • Usual, slight signs of wear (fine surface lines) Article: Parallel gauge set / Gauge set Design: metric Accuracy class: Grade 1 Number of gauge blocks: 87 pieces Reference temperature: 20 °C Material: hardened steel Storage: high-quality wooden box \" Auction-ID: A7-46417-154
\" Gauge block set / Parallel gauge blocks – Long end gauge (used) Manufacturer: Längenmesstechnik GmbH Limbach Standard: DIN EN ISO 3650 Tolerance class: Class 2 All gauge blocks with through-holes, design as precision parallel gauge blocks. Condition • Used • Measuring surfaces visually good, with slight traces of use • Wooden cases with signs of wear and tear 4 individual longitudinal dimensions: 1. 200 mm – ID 3064 2. 250 mm – ID 3065 3. 300 mm – ID 3066 4. 400 mm – packed separately \" Auction-ID: A7-46417-205
CONTROLS conventional PRESS FORCES total force (nominal): 75 to PRESS TABLE table surface (left-right): 1250 mm table surface (front-back): 1110 mm SLIDE table surface (left-right): 960 mm table surface (front-back): 750 mm SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke adjustment: yes stroke min.: 10 mm stroke max.: 50 mm stroke rate (min.): 120 /min stroke rate (max.): 600 /min STRIP-FEEDER feeder type: roll feeder sheet width max.: 300 mm ELECTRICAL SPECIFICATIONS total power consumption: 15.5 kW DIMENSIONS / WEIGHTS total weight approx.: 13500 kg ATTACHMENTS (PRESSES) strip feeder: yes feeder type: roll feeder
CONTROLS electronic controls DIMENSIONS / WEIGHTS space requirements -left/right-: 3600 mm space requirements -front/back-: 1500 mm total height: 2800 mm total weight approx.: 2000 kg never used (NEW) ! - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Dimensions: max. 300 mm x 250 mm x 210 mm Weight: ...
Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg
Two complete blister packaging lines from the pharmaceutical industry are available. 1.1) Automatic case packer IMA CP 28 BA, year of manufacture: 2000, min. carton dimensions X/Y/Z: 220mm/120mm/120mm, max. carton dimensions X/Y/Z: 600mm/400mm/350mm, output: 8cartons/min, machine dimensions X/Y/Z: approx. 4900mm/1900mm/2650mm, weight: approx. 1500kg. 1.2) Bundle wrapping machine IMA BFB MS 300 A with stretch banding, year of manufacture: 2005, bundle length range: 20mm-360mm, bundle width range: 55mm-220mm, bundle height range: 55mm-220mm, output: approx. 40bundles/min, max. film roll diameter: 300mm, machine dimensions X/Y/Z: approx. 2900mm/1300mm/1950mm, weight: approx. 1500kg. 1.3) Mini robot. Overall line dimensions X/Y/Z: 10750mm/2350mm/2250mm, transport weight 1/2: approx. 4700kg/5000kg, total weight: approx. 10000kg. Without shrink tunnel. 2.1) Blister packaging line IMA Giant 1 B ...
Length 275 cm; total approx. 190 pieces Auction-ID: A1-46266-366
MLVI; 1 x left and 1 x right AFM. 880x2315 mm; 1 x Left; 1 x right dim. 930x2315 mm Auction-ID: A1-46266-321
MDCX 1x right 880x2315 mm, 1x right 930x2315 mm; 2x left 930x2315 mm Auction-ID: A1-46266-320
Nuaire high capacity blower, dimensions: ø 800 mm x 350 mm.
Two-station machine for containers up to 5 ltr. With double head 180 mm stitch. 2 extruders - one for each side. With integrated leak tester, mill with feed belts, bottle belt. Material feeder and mixer.
New Saw Blades for HBP 530 A Band: 7300 x 54 x 1.6mm Quantity: 12 pcs. see pictures Condition: unchecked (6) Auction-ID: A7-46460-582
- 1 x Volvo dozer blade suitable for the Volvo ECR235E crawler excavator model; - unused / as good as new; - Viewing recommended; Auction-ID: A1-46334-31
Saw blade grinding machine with: - Diamond grinding wheel for carbide circular saw blades - Rubber feet for damped and quiet operation - Spacers for different saw blade holes Without saw blade Saw blade diameter 80 - 700 mm Workpiece headstock motor 0.25 kW Grinding wheel diameter 125 mm Speed 2850 rpm Grinding range -20 to +20 degrees Machine weight approx. 12 kg Space requirements approx. 700 x 400 x 300 m Condition: never used / new (5) Auction-ID: A7-46460-422
Type: Stone cutting machine Blade: Diamond disc Cooling: Water cooling Electrical supply: 380V 3F 50 Hz Current: 20 A Auction-ID: A7-46477-11
Manufacturer: Rump Model: Strahlanlagen Xedura 1500 Year of Manufacture: 2017 Type of Machine : Wire belt blasting machine Condition: good to very good Maintenance: regularly, once a year Beam hours: 1,849 Total operating hours: 2,146 (approximately 200 hours per year) Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC Rated power: approximately 82 kW Find more here - / Contact us at -
CONTROLS PNEUTRONIC CYBELEC STEUERUNG PRESS DESIGN drive system: hydraulic frame design: H-frame, monoblock quick die change system: no feedstock transport direction: left to right SLIDE total force (nominal): 400 to stroke: 230 mm stroke rate (max.): 35 /min SLIDE (HYDR. PRESS) approximation velocity max.: 120 mm/s working velocity min.: 5 mm/s working velocity max.: 50 mm/s return velocity max.: 135 mm/s COUNTER RAM nominal force: 100 to stroke: 40 mm V-RING nominal force: 200 to stroke: 40 mm TOOL DIMENSIONS lower table (left-right): 1050 mm lower table (front-back): 800 mm upper table (left-right): 800 mm upper table (front-back): 800 mm shut height max.: 410 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 350 mm sheet thickness max.: 16 mm feeding step min.: 1 mm fee ...
PROCREA INJECTION BLOW MACHINE TYPE : Rev 100 This PROCREA REV 100 injection blow molding machine can produce fully finished, waste-free hollow containers, similar to injection molding, using various plastics. It features fully automatic cycles, with capacities ranging from 5 cc to 750 cc and weights from 5 g to 100 g. This machine is designed to work with molds of 1 to 4 cavities, and its high production rate is achieved thanks to the turret system, which performs all injection, blow molding, and finished part ejection operations in a single step. Mold construction for the Rev 100 is very simple thanks to the automatic extraction system applied to the turret.
BEKUM BA52 Blow Molding machine Type : BA 52 / S 801 Year: 1993 1 station Clamping force : 450 kN Original BEKUM control Extruder type : S 701 Refurbished 6-liter head with accumulator Head and screws reconstructed Max.bottle volume: 60 Litres Mold dimensions (L x W x H): 1200/750/2 x 150-300 (mm)
Bosch professional (blue) in L-Box GKF 12V–8 With battery and charger as well as spare milling cutters Technical highlights of the GKF 12V-8 Ergonomics: World's first professional cordless edger in the 12V segment with a unique shape for perfect control. Depth adjustment: Macro quick adjustment and fine micro adjustment (0.1 mm steps) with locking. Safety: Sensor-controlled drop control that immediately switches off the device in the event of a fall. Auction-ID: A1-46501-1645
BEKUM BA 200 Blow Molding Extrusion Machine Type: BA 200/ S123 Year: 1990 8L Accumulator Head 1 Head and 1 Station Material Processed: PE Production Capacity: 500 kg/h Extruder Type: Accumulator Number of Extruders: 1 Screw Diameter: 120 mm L/D Ratio: 24 Thickness Control: Yes Material Feed Opening Stroke: 710 mm Clamping Force: 800 kN There are 2 machines
PET BLOW MOLDING - MAG PLASTIC - Blow molding solution for PET bottles Year: 1994 Type: SSB 40 Input voltage: balanced three-phase 400 V Frequency: 50 or 60 Hz +- 5% Total installed power: 86 kW (Option 102 kW) Weight: Approx. 5,000 kg Number of molds: 4 Clamping force: 250 KN Total opening stroke: 120 mm
Bosch professional (blue) 18V in L-Box GST 18V LI S Jigsaw Charger included 1 battery 4AH Jigsaw blades new and leftovers Auction-ID: A1-46501-1531
Machine Type: PB1E/S E42/24 (Electric) Year: 2008 Extruder Screw Diameter: 42mm Screw L/D Ratio: 24 Capacity : 1L Extruder Motor Power: 22kW Extruder Heater Power: 4.1kW Heating Zones on Plasticizing Cylinder: 3 Extruder Cooling Fans: 2 Plasticizing Capacity with PE: 24kg/h Plasticizing Capacity with BFPE: 26kg/h Double station
PLASTIBLOW Machine type: PB1E/D E60/25 (Electric) Year: 2007 Extruder screw diameter: 60mm Screw L/D ratio: 25 Molds: 2 Stroke: 260mm Clamping force: 35 Capacity : 3L Extruder motor power: 30kW Extruder heater power: 9.6kW Heating zones on laminating cylinder: 4 Extruder cooling fans: 3 Laminating capacity with PE: 58kg/h Laminating capacity with BFPE: 75kg/h Double station Dual head with 100mm center distance. Head modified from the original (3 heads with 85mm center distance => 2 heads with 100mm center distance) in 2021.
TS 55 REBQ Plus Cables and Systainer with replacement blades Auction-ID: A1-46501-819
Willow block / trunk / 3.70 m long / diameter approx. 70cm / sawn in 60mm / 9 planks / dry air-dried Auction-ID: A1-46501-984
Please note, the photos are standard packages -> the actual package may vary slightly. Auction-ID: A1-43752-55
Leaf blower Kibani 76cc. in box Auction-ID: A1-40418-228
maximum number of results exceeded
please refine your search
140 € 
