bl used for sale

Key data: 150 KW, 140 kVA, 400 V

Viessmann Gas CHP Vitobloc 200 EM 140/207 Gas electricity and heat generators from 2016, 69,200 operating hours, with control, heat exchanger and silencer. 140 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 44.2L12C 6/4, 165 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM 140/207 Type: Gas CHP Serial Number: 7411151 5 03073 105 Power [KWel]: 140 Voltage [V]: 400 Current [A]: 238 Frequency [Hz]: 50 Engine: MAN E2876E312 Motor power [KW]: 150 AC Generator: Leroy Somer LSA 44.2L12C 6/4 Power [KVA]: 165 Year of Make: 2012 Hours: 69,200 Weight unit [kg]: 3,420 Dimensions LxWxH [m]: 4.45 x 0.95 x 1.73

Block size press Müro 5000/A4 WT; cleaned and tested; insertion width 350mm; Insertion height 520mm; 1x dryer. Padding press Müro 5000/A4 WT; cleanded and checked; width 350mm; hight 520mm; one heater.

The shredding plant is equipped with two powerful bevel gear motors, delivering a combined total power of 60 kW (2 x 30 kW). The chamber length of the RedUnit XRL is 1600 mm, designed for extensive shredding tasks. With a speed of 42 min⁻¹, the machine operates efficiently and reliably., The power supply is 400 V AC at 50 Hz electrical frequency. The motors are of high quality and lacquered, meeting the latest standards (AGM4606.TF). The operating temperature range is from 0°C to +50°C, so the machine operates reliably under various climatic conditions., MODERN CONTROL AND AUTOMATION:, The crushing system features a fully automatic control with the PCU type SQF0050 and a Performance Control Unit (SQF0060). Operation is via a modern 10-inch touch panel that enables user-friendly operation and intuitive control. The system supports both automatic operation and manual hand operation.,  ...

- Frozen goods blocks: 800 x 400 x 300 mm, - Target particle size: about 1/3 of the output size, so that the downstream RedUnit XRL260 can process the material, - Throughput: Depending on material between 8-12 t/h

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: Aertenica 1.5 kW 1360 rpm -Fan wheel: Ø 235 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 215 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Aertenica Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: 1.5 kW 1360 rpm -Fan wheel: Ø 225 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 200 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg

ASB 50MB V2 injection blow molding machine Year : 2005 Working hours : 59 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. It has a completely new pump motor and pump. + auxiliary equipments

ASB 50MB V2 injection blow molding machine Year : 2006 Working hours : 30 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. The pumps have been replaced with new ones. + auxiliary equipments

Automatic circular saw sharpening machine completely overhauled. For fully automatic sharpening of HM circular saw blades, of all common tooth shapes. Equipped for oil cooling, fire extinguishing equipment. Technical data: Circular saws Ø with robot 130 to 600, without robot 130 to 840 mm, tooth pitch with robot 8 to 50 mm, without robot 8 to 120 mm. Available on request with loader robot ND 230, extraction system.

Chest grinding machine for HM circular saw blades. Completely overhauled and painted. Suitable for oil and emulsion cooling. Saw blade Ø 150 - 1000 mm, tooth pitch 0 - 120 mm.

Automatic machine for chest and back grinding of carbide-tipped circular saw blades; Refurbished and repainted

Knife sharpening machine for sharpening planing and chipping knives; Sanding length 1300 mm; overhauled and partially painted;

max. format 52 x 52 cm Year of construction 2002 Block Glue Press manual block gluing machine for cold glue Table model Delivery date: short-term

Key data: 420 KW, 400 V

Kuntschar und Schlüter (Wolf) Gas CHP GTK 382K Gas electricity and heat generators from 2013, 64,000 operating hours, with control, cooling and two silencers. Engine in need of overhaul. 382 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 355MA4-B, 680 KVA Manufacturer: Kuntschar and Schlüter (Wolf) Model: GTK 382K Type: Gas CHP Serial Number: 0094 Power [KWel]: 382 Engine: MAN E2842LE322 Engine power [KW]: 420 Year of Make: 2010 Hours: 64,000 MarelliGenerators MJB 355MA4-B AC Generator Manufacturer: MarelliGenerators Model No.: MJB 355MA4-B Type: AC Synchronous Generator Serial Number: MJB3532L014M0 Power [KVA]: 680 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 981 Speed [1/min]: 1,500 Year of Make: 2013 Weight [kg]: 1.780

Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light, saw diameter: 80-840 mm, Bore diameter: from 10 mm, sheet thickness: < 8 mm, Tooth pitch: 6 - 120 mm, Cutting length:

Equipment: Agitator, Overpressure, Vacuum,Manufacturer: Hinke Tankbau,Condition: used,Volume: 55,610,Vacuum: 0.25,Max. overpressure: 1.0,Max. permissible Operating temperature : 100,Shelves: clapper bottom,Design: standing,Stand shape: feet,Number of feet: 4,Diameter inside: 3,300,Cylindrical height: 5,590,Total height: 8,600,Wall thickness underbody: 12,Wall thickness cylinder: 6,Wall thickness upper floor: 10,Technical documents: Drawing, various underlays,Manhole / dome: in the upper floor (DN 600),Type plate: Yes,Equipment: spray head, crane eyelets,Outlet: flange DN100,last purpose: solvent,material

7pcs MWM Deutz TBDG 441 CV16 (dual fuel) year 1990- 1993, 6 pcs. functional, spare parts, turbochargers, injection pumps Cylinder head, starter ec. ec. 6pcs Generator 6600V 50Hz 1976KVA

Blowing machine Kosme KSB 4000 year of manufacturing: 2003 capacity: 4.700 bph incl. preform feeding system neck type: PCO 1810 The machine is out of production since October 2025 and it is already dismantled:

Suitable for automatically grinding chip breaker grooves in HSS, segmented and TCT circular saws. Accessories: Control system for automatic offset of grinding spindle,, coolant system,, stepless adjustable working rate,, machine light., 1 sawblade mount., Circular saw blade diameter: 165 - 630 mm, Tooth pitch: 3 - 50 mm, Saw blade thickness: 2 - 6 mm, Working speed: continuously adjustable from 24 - 50 z/min., Grinding wheel diameter: 25 and 30 mm, Grinding wheel width: 0.3/0.4 and 0.5 mm, Connected load approx.: 0.4 kW (400 V / 50 Hz), Weight approx.: 210 kg, Dimensions W x D x H approx.: 1020 x 900 x 1620 mm, colour: light grey RAL 7047

material width: 1650 mm material thickness: 3,00 mm no. of straightening rolls: 21 Control: sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 50 mm between stands ca.: 1720 mm run-in height: 1250 mm total power requirement: 45 kW weight of the machine ca.: 24,50 t dimensions of the machine ca.: m 6-HIGH LEVELER / Strip Leveler / with Quick-Change System - 18 Back-up Supports - Digital Roll Adjustment (0.01 mm resolution) - Gearbox renewed in 2021 - Quick-Change System The quick-change system is mounted on a sliding plate. This sliding plate—on which the leveling rolls as well as the entire back-up support assembly are mounted—can be extended, allowing for quick and easy roll replacement in an easily accessible position. The extension and retraction of the sliding plate are hydraulically actuated. Connection to the drive mechanism is automatic. - Intermediate Rolls The intermed ...

The Florin Mini Compact Dryer is a compact drying system for applications where residual moisture must be removed or products must be blown off specifically. The system was developed as an energy-efficient alternative to classic compressed-air blow-offs and operates without a compressed-air supply., Typical application areas are blowing off coded surfaces before labeling, removal of residual moisture after washing or filling processes, drying of closures, cap feeding, and ejection of empty bottles. The compact design allows the system to be integrated into existing production lines even in confined spaces., With a power consumption of up to 180 watts and an air flow rate of 52 m³/h, the Mini Compact Dryer offers an energy-efficient solution for numerous applications in the beverage, food, and packaging industries. The IP67 protection rating enables use in demanding production environmen ...

A Uhlmann blister packaging line in need of repair is available. 1) Uhlmann UPS 4 ETX blister machine, year of manufacture: 2008, design: modular balcony design, modules: 12, blister capacity: 10 tablets, blister format X/Y/Z: 100mm/39mm/5.7mm, packaging output: 220blisters/min, roll width forming/sealing: 256mm/246mm, feed: 102mm, max. forming film roll diameter: 800mm, max. lidding film roll diameter: 300mm, filling section length: 1360mm, theoretical output: 50cycles/min, film width range: 63mm-300mm, punching width range: 28mm-284mm, max. forming depth: 12mm, min. blister dimensions X/Y/Z: 30mm/3.5mm/60mm, max. blister dimensions X/Y/Z: 110mm/12mm/145mm, max. stack height: 85mm, max. blisters per stack: 10, weight: approx. 7000kg. 2) Uhlmann C 2155 cartoner, year of manufacture: 2008, cartoning output: 10-150cartons/min, max. stacking output: 400blisters/min, product carrier height:  ...

centrifugal blower, centrifugal fan, centrifugal fan, centrifugal fan used Manufacturer: EUROVENTILATORI SPA Type: TRC 1251 RDO ES12 Volume flow: 23724 m³/h at 15° / 71208 m³/h at 85° Pressure: 6207 Pa at 15° / 2675 Pa at 85° Diameter approx. 1800 mm Inlet approx. 800 mm Outlet: approx. 800 x 600 mm Explosion-proof: ATEX 94/9/EC ExII 2D c T125 90 kW 1429 rpm 400/690 V Dimensions: approx. 3000 x 2000 x 2300 mm All items are checked for function before delivery, if technically possible! Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

We always have a large number of blowers and fans in stock centrifugal blower, centrifugal fan, centrifugal fan, centrifugal fan used Manufacturer BERLINER LUFT Type: RE 71 710-1-D Volume flow: 12100 m³/h Diameter approx. 800 mm Inlet approx. 500 mm Outlet: approx. 450 x 450 mm 7.5 kW 1450 rpm 380/660 V Dimensions: approx. 1500 x 1200 x 1550 mm All items are checked for function before delivery, if technically possible! Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Key data: 55 KW, 69 kVA, 400 V

High-quality CHP unit for biogas or sewage gas. Charged MWM gas gasoline lean-burn engine, Additional switchover to natural gas operation planned, Additional emergency power operation, Complete control and control of the external emergency cooling already integrated in the control system, oil reserve tank in the bypass, electric engine oil management, monitoring and regulation of the combustion chamber temperature of each cylinder, sound insulation housing, room temperature control and much more. The plant ran on a sewage treatment plant, was meticulously maintained by us and is in very good condition. Because of the higher amount of gas, it was exchanged for a more powerful CHP unit from EVM. New price of this system approx. 135,000 euros Plant can be purchased in this condition. Or the system can be completely overhauled by us. With warranty. Service and support in Austria, Germany, ...

Key data: 4 KW, 400 V

Vaillant Gas Generator (mini-CHP) Eco-Power 4.7 Natural, bio or liquefied gas electricity and heat generators from 2008, unknown operating hours, Engine defective. 4.7 KWel x 1,500 rpm, 400 V/50 Hz. Manufacturer: Vaillant Model: Eco-Power 4.7 Type: mini natural, bio or liquefied gas CHP Serial number: 210801336006 0089000249N1 Power [KWel]: 1.5 – 4.7 Power [KWth]: 4.7 – 12.5 Current [V]: 400 Frequency [Hz]: 50 Year of Make: 2008 Operating hours: unknown Weight unit [kg]: 300 Dimensions LxWxH [m]: 1.20 x 0.80 x 1.25

Brand: UNILOY MILACRON Model: UMA 12 SH EZ SECO2 3D Suction Blow Molding Machine , Automotive air ducts / conduits production. (video available). Year: 2010 Materials used: PP, PP-EPDM, TPC Machine time under power (h): 22,496 h Screw diameter (mm): 2 screws Ø60 23.6L/D) Head-Accumulation volume: MULLER - 792 cm³ Max. die diameter: 28 mm Locking force (t): 12 t Platform dimensions (H x W): 765 x 800 mm Max. mold dimensions (H x W): 1140 x 1600 mm Max. mold weight: 2500 kg Opening (min/max): 800/1400 mm Oil volume: 100 L Press weight: 19,650 kg Press dimensions (L x W x H): 5.5 x 6.2 x 4 m

Sharpening machine MADO type MNS 630 Type of current: 400 volts, 50 Hz three-phase current Dimensions : 520 x 365 x 368 mm Weight: 17 kg Footprint : 180 x 340 mm With the SUPERSCHLIFF from MADO you can achieve the correct "spherical grind", which is recommended by the experts of leading knife manufacturers. iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 600 mm -Engine power: 4.0 kW / 2910 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 600 x 40 mm -Dimensions: 675/1120/H880 mm -Weight: 83 kg

Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 740 mm -Engine power: 7.5 kW / 2925 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 740 x 40 mm -Dimensions: 600/1050/H1000 mm -Weight: 152 kg

diameter range 8-16 mm shaft length under head 25-180 mm max. cut-off length 220 mm output - pieces/min 70

bushing cut-off diameter range 8-18 mm number of dies 5 number of stations (incl. cut off) 6 shaft length under head 120 mm cutting length 140 mm output - pieces/min 60-170 press power 100 to

good condition diameter range 10-20 mm shaft length under head 180 mm cutting length 230 mm output - pieces/min 45/50/56/63 press power 160 t plane of stroke 240 mm

bushing cut-off , PKO , IFO , Slug feeding possible diameter range 16-34 mm number of dies 5 number of stations 6 cutting length 210 mm shaft length under head 180 mm output - pieces/min 55-80 press power 450 t

bushing cut-off , PKO diameter range 16-30 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 235 mm shaft length under head 180 mm output - pieces/min 90 press power 380 to

bushing cut-off diameter range 16-27 mm number of dies 4 number of stations 7 cutting length 50-240 mm shaft length under head 30-180 mm range of thread length 95 mm max. width acros flats 24-41 mm output - pieces/min 84

bushing cut-off diameter range 16 - 30mm number of dies 4 number of stations (incl. cut off) 5 cutting length 260 mm shaft length under head 225 mm output - pieces/min 60-80 press power 450 t

bushing cut-off diameter range 23 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 190 mm shaft length under head 175 mm output - pieces/min 120 press power 220 to

bushing cut-off , PKO , IFO diameter range 10-26 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 220 mm shaft length under head 165 mm output - pieces/min 35-70 press power 380 to

bushing cut-off diameter range 23 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 175 mm shaft length under head 130 mm output - pieces/min 86 - 130 press power 220 to

bushing cut-off diameter range 8-22 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 175 mm shaft length under head 6-140 mm output - pieces/min 125 press power 250 to

bushing cut-off , PKO diameter range 8-22 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 175 mm shaft length under head 155 mm output - pieces/min 105 press power 250 to

bushing cut-off , PKO diameter range 10-22 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 200 mm shaft length under head 160 mm output - pieces/min 60 max. thread length 95 mm max. width acros flats 32 mm

bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer diameter range 8,5-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

bushing cut-off diameter range 8 - 20 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 175 mm shaft length under head 142 mm output 40-80 press power 250 to

diameter range 8-20mm number of dies 4 number of stations (incl. cut off) 5 output - pieces/min 50 shaft length under head 200 mm cutting length 225 mm

bushing cut-off , PKO , IFO diameter range 17 mm number of dies 4 number of stations 5 cutting length 30-230 mm shaft length under head 40-190 mm output - pieces/min 70-110 press power 160 t

diameter range 10- 18 mm number of dies 4 number of stations 5 cutting length 155 mm shaft length under head 125 mm output - pieces/min 90 press power 200 to max diameter of the head 35 mm

bushing cut-off diameter range 8-16 mm number of dies 2 number of stations (incl. cut off) 4 cutting length 160 mm shaft length under head 130 mm output - pieces/min 100