bl used for sale

Plummer Block Housings, Plummer Block Housings, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Housing, Plummer Block Unit -Manufacturer: SKF, plummer block housing type SNH 513-611 -Bore diameter: 77 mm -Quantity: 1x bearing housing available -Dimensions: 275/110/H150 mm -Weight: 6.6 kg

Valve block, hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Control block: Hydraulic control block -Valves: 23 P1 M/10 D4 P4-S1/20H -Individual components: see photos -Shipping/Price: complete -Dimensions: 270/270/H315 mm -Weight: 27 kg

Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg

Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower -Manufacturer: Elektror, pressure blower radial fan type HRD 2/4T -Drive: 2.6 kW -Speed: 2860 rpm -Volume flow: 17.0 m³/min -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Protection class: IP 54 -Dimensions: 580/510/H515 mm -Weight: 38 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower -Manufacturer: Elektror, pressure blower radial fan type RD 92 -Drive: 15 kW -Speed: 2950 rpm -Volume flow rate: 7500 m³/h -Pressure: 8300 Pa -Inlet connection: Ø 220 mm -Outlet connection: Ø 220 mm -Protection class: IP 54 -Fan wheel: Ø 720 x 60 mm Quantity: 1 piece available -Dimensions: 960/910/H1075 mm -Weight: 210 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: FPZ effepizeta, side channel blower side channel compressor -Type: SCL 70 SH -Drive shaft: Ø 35 x 90 mm -Bolt circle: Ø 160 x 10 mm -Drive motor: can be supplied at an additional cost -Dimensions total: 545/520/H565 mm -Weight: 37 kg

Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: Krämer, Radial fan, chip extraction blower, fan type VFM-K -Volume flow rate: 4500 m³/h -Motor: AEG 4 kW 2870 rpm -Inlet connection: Ø 250 mm -Output connection: 235 x 210 mm -Fan wheel: Ø 400 x 160 mm -Overall dimensions: 705/610/H785 mm -Weight: 95 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Elektror, side channel blower side channel compressor -Type: SD-4N/S892 -Drive: 1.2 kW -Speed: 2800 rpm -Flow rate: 2.8 m³/min / 168 m³/h -Compression pressure: 180 mbar -Dimensions total: 450/360/H370 mm -Weight: 24.7 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife set for meat cutter multi-purpose cutter dicer -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 590/390/H220 mm -Weight: 71 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 50 mm see photos -Bolt circle: Ø 75 x 6 mm -Price/Delivery: complete -Dimensions: 328/190/H8 mm -Weight: 1.2 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: various versions, see photos -Art.No.: 6x 2334850 / 3x 2334830 / 1x 2335190 thickness 1.6 / 1 / 2.7 mm -Price/Delivery: complete -Transport dimensions: 375/111/H20 mm -Weight: 1.6 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: 3 cutting blades, see photos -Hole: Ø 30 mm -Dimensions: 430/310/100 mm -Weight: 22.9 kg

Stuffing box for screw conveyor, transport screw, screw conveyor, conveyor technology, pipe conveyor screw, drying screw, cooling screw, cooling tube screw, heating screw, heating tube screw, screw heat exchanger -Stuffing box: blank, for shaft Ø 40 mm -Type: BSK 40 50 / BSB 40 -Dimensions: see photos -Number: 2x stuffing boxes available -Price: per piece -Total dimensions: Ø 160 x 95 mm -Weight: 5.9 kg/pcs

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: Karl Klein, blower radial fan -Type: DNG3-9.8/S WS L -Motor power: 0.07-0.16 kW -Speed: 2580 - 2810 rpm -Volume output: 445 -485 m³/h -Fan wheel: Ø 135 x 60 mm -Connection input: Ø 100 mm -Connection output: 80 x 65 mm -Quantity: 5 pieces available -Price: per piece -Dimensions: 430/200(H265 mm -Weight: 5.8 kg

Block cutting nozzle, burner nozzles, cutting nozzles, cutting machine, burner, oxy-fuel cutting machine, cutting nozzles, -Block nozzle: Block cutting nozzle type 60 - 100 A 3 pieces -Cutting range: 60 - 100 mm -Pressure: 4.5 - 5.5 bar -Diameter: 20 mm -Length: 65 mm -Price/Delivery: complete -Transport dimensions: 70/65/H20 mm -Total weight: 0.2 kg

Block cutting nozzle, burner nozzles, cutting nozzles, cutting machine, burner, oxy-fuel cutting machine, cutting nozzles, -Block nozzle: Block cutting nozzle type AB 10-25 mm 3 pieces -Cutting range: 10 - 25 mm -Pressure: 3.0 - 4.0 bar -Diameter: 20 mm -Length: 65 mm -Price/Delivery: complete -Transport dimensions: 70/65/H20 mm -Total weight: 0.2 kg

Block cutting nozzle, burner nozzles, cutting nozzles, cutting machine, burner, oxy-fuel cutting machine, cutting nozzles, -Block nozzle: Block cutting nozzle type 3 - 10 A 6 pieces -Cutting range: 3 - 10 mm -Pressure: 2.5 - 3.5 bar -Diameter: 20 mm -Length: 65 mm -Price/Delivery: complete -Transport dimensions: 130/65/H20 mm -Total weight: 0.5 kg

Block cutting nozzle, burner nozzles, cutting nozzles, cutting machine, burner, oxy-fuel cutting machine, cutting nozzles, -Block nozzle: Block cutting nozzle type 25 - 40 A 3 pieces -Cutting range: 25 - 40 mm -Pressure: 3.5 - 4.5 bar -Diameter: 20 mm -Length: 65 mm -Price/Delivery: complete -Transport dimensions: 70/65/H20 mm -Total weight: 0.2 kg

Block cutting nozzle, burner nozzles, cutting nozzles, cutting machine, burner, oxy-fuel cutting machine, cutting nozzles, -Block nozzle: Block cutting nozzle type 40-60 A 3 pieces -Cutting range: 25 - 40 mm -Pressure: 4.0 - 5.0 bar -Diameter: 20 mm -Length: 65 mm -Price/Delivery: complete -Transport dimensions: 70/65/H20 mm -Total weight: 0.2 kg

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 52 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1 piece available -Dimensions: 220/123/H160 mm -Weight: 9 kg

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 60 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2x wheel block available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.7 kg/piece

Friction wheel, running wheel for bridge crane, bridge crane, overhead crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, Wheel block for crane chassis -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 48 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.5 kg/pc.

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1x wheel block available -Dimensions: 220/97/H160 mm -Weight: 8.5 kg

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks -Step block: clamping pad 2 pieces / 1 set -Width: 30 mm -Clamping height: min.72 mm -Dimensions each: 131/30/72 mm -Quantity: 5 sets available -Price/Distribution: per set -Transport dimensions: 131/30/H75 mm -Total weight: 2.1 kg/set

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: 2 pieces clamping prism for milling machines or similar -Prism width: 135 mm -Dimensions: see photo technical drawing -Price/Delivery: complete -Dimensions each: 150/90/H90 mm -Weight: 6.6 kg/piece

Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades -Cutting blades. Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm -Total weight: 57 kg

Control, control block, pneumatic control -Manufacturer: Festo, pneumatic control -Solenoid valves: Type 533345 / 533342 6 pieces each -Electronic module: MPA1-FB-EMG-8 3 pieces -Interlinking block: CPX-GE-EV-S / CPX-FB13 -Interlinking block: CPX-GE-EV / CPX-AB-8-M8 -End plate: CPX EPL-EV -Electronic module: MPA1-FB-EPL-EU -Valve terminal: MPA-FB V1 -Individual components: see photos -Shipping/Price: complete -Dimensions: 580/130/H60 mm -Weight: 3.6 kg

Control, control block, pneumatic control -Manufacturer: Festo, pneumatic control -Solenoid valves: Type 533345 3 pieces / 533342 9 pieces -Electronic module: MPA1-FB-EMG-8 3 pieces -Interlinking block: CPX-GE-EV-S / CPX-FB13 -Interlinking block: CPX-GE-EV / CPX-AB-8-M8 -End plate: CPX EPL-EV -Electronic module: MPA1-FB-EPL-EU -Individual components: see photos -Shipping/Price: complete -Dimensions: 530/130/H60 mm -Weight: 3.4 kg

Control, control block, pneumatic control -Manufacturer: Festo, pneumatic control -Solenoid valves: Type 533345 / 533342 6 pieces each -Electronic module: MPA1-FB-EMG-8 3 pieces -Interlinking block: CPX-GE-EV-S / CPX-FB13 -Interlinking block: CPX-GE-EV / CPX-AB-8-M8 -End plate: CPX EPL-EV -Electronic module: MPA1-FB-EPL-EU -Valve terminal: MPA-FB V1 -Individual components: see photos -Shipping/Price: complete -Dimensions: 580/130/H60 mm -Weight: 3.6 kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Exhaust fan: heat-resistant -Dust extraction fan: radial fan -Motor: 7.5 kW 1465 rpm -Connection: Inlet Ø 600 mm -Connection: Outlet Ø 400 mm -Volume flow: m³/h -Dimensions: 1985/1570/H1780 mm -Weight: 442 kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low-pressure radial fan, blower, pressure blower, side channel blower, side channel blower, ring blower, vacuum pump, blower, radial fan -Manufacturer: cimme, dust extraction fan radial fan type CBJ G06330 E4 RD -Engine: 9.2 kW 2925 rpm -Volume flow: 35/63 m³/min -Connection: Inlet Ø 250 mm -Connection: Outlet Ø 250 mm -Fan wheel: Ø 660 x 70 mm -Protection class: IP55 -Dimensions: 1090/780/H1330 mm -Weight: 245 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: DEGA, side channel blower/side channel compressor with filter -Type: 2XHB510H26 -Drive: 1.6 kW -Speed: 2850 rpm -Flow rate: m³/h -Compaction pressure: 200 mbar -Overall dimensions: 570/800/H830 mm -Weight: 57 kg

Knife holder, shear knife holder, scissor cutting holder, cutting knife holder, scissor slot holder, scissor knife holder -Manufacturer: Dienes, pneumatic cutting blade holder -Type: PSG -Part No.: 245AA50002001 -Blade diameter: 130 mm / 5.118 inches -Dimensions: see photos -Number: 2x shear blade holders available -Price: per piece -Dimensions: 320/70/H145 mm -Weight: 4 kg/pc.

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: OPT, Replacement blades for pneumatic shears, unused, original packaging -Type: 100S -Cutting length: see photo -Quantity: 4x replacement blades available -Price: per piece -Cardboard dimensions: 160/50/H30 mm -Weight: 0.1 kg/pc.

Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower radial fan, double version without drive -Fan wheel: 2x Ø 400 x 380 mm -Axle length: approx. 1230 mm -Motor power: designed for 0.55 to 7.5 kW -Drive shaft: Ø 30 mm, V-belt pulley 2-groove Ø 235 mm see photos -Number: 2x blowers available Price: per piece -Dimensions: 1470/600/H690 mm -Weight: 65 kg/unit

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2016-1BB42 -Number: 2x switches available -Price: per piece -Dimensions: 60/45/H75 mm -Weight: 0.3 kg/pc.

Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan blower, without drive -Type: Fan wheel Ø 265 x 35 mm -Drive shaft: V-belt pulley Ø 75 mm, see photos -Inlet connection: Ø 95 mm -Outlet connection: Ø 95 mm -Dimensions: 355/200/H490 mm -Weight: 7 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2026-1BB40 -Number: 11 switches available -Price: per piece -Dimensions: 85/45/H105 mm -Weight: 0.6 kg/pc.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2026-1BB40 / 3RH2911-1GA40 -Number: 16 switches available -Price: per piece -Dimensions: 85/45/H150 mm -Weight: 0.6 kg/pc.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RH2131-1BB40 / 3RH2911-1GA40 -Number: 16 switches available -Price: per piece -Dimensions: 60/45/H120 mm -Weight: 0.3 kg/pc.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2027-1BB44 / 3RH2911-1HA11 -Number: 12 switches available -Price: per piece -Dimensions: 85/45/H150 mm -Weight: 0.6 kg/pc.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RH2131-1KB40 -Number: 9 switches available -Price: per piece -Dimensions: 60/45/H105 mm -Weight: 0.3 kg/pc.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2017-1BB42 -Number: 3x switches available -Price: per piece -Dimensions: 60/45/H75 mm -Weight: 0.3 kg/pc.

Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower radial fan, double version without drive -Fan wheel: 2x Ø 400 x 380 mm -Drive shaft: Ø 30 mm, V-belt pulley 2-groove Ø 231 mm see photos -Outlet: 470 x 275 mm -Dimensions: 1400/660/H615 mm -Weight: 47 kg

Rotary lobe compressor, rotary lobe blower, rotary piston pump, Roots pump, compressor, vacuum pump, pressure blower, pressure compressor -Manufacturer: Shandong Huadong Blower Co., Ltd. -Brand: XinHuadong -Model: HDSR2608 -Pressure increase: 90 kPa -Main shaft speed: 1150 rpm -Blower No.: 20062006621 -Engine power: 90KW -Flow rate: 41 m³/min -Date of manufacture: June 22, 2020 -Production number: 2006-128 -Dimensions: 1170/1820/H1460 mm -Weight: 1440 kg

radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Exhaust exhaust fan: heat-resistant -Dust extraction fan: radial fan -Engine: 90 kW 1480 rpm -Connection: Inlet Ø 390 mm -Connection: Output Ø 390 mm -Fan wheel: Ø 1220 mm (drawing in the pictures) -Volume flow rate: m³/h -Dimensions: 2610/2030/H2080 mm -Weight: 1950 kg

Overview  This rotary stretch blow moulding machine was manufactured in 2017 by Kosme. The machine is designed for the production of PET bottles for beverage applications. It is equipped with 6 cavities and was used for medium-capacity production. The machine has been dismantled in January 2026 and is available without moulds.  Technical data Capacity: approx. 12,000 bottles/hour Formats: up to 3 L PET bottles Application: PET bottle production Configuration: Rotary stretch blow moulding machine, 6 cavities Neck finish: PCO 1881 Scope of Delivery Blow moulding machine | Kosme | KSB 6R | 2017 | 6-cavity rotary machine, without moulds Preform feeding system  Chiller unit  Air conveyor system  Control system | Integrated HMI

An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible.

Color: Black Single length = 2 m Original packaging Price per m = 2.00 € + VAT Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment