bl used for sale

chamber volume: 170 liter useable volume: -- liter friction: -- motor drive power: 800 kW Condition: used - Specification: internal mixer used as additional option: Rubicon batch-off plant - capacity approx.: 170 litres - rotor model: tangential design - drive controller: Allen Breadley - Control: Mitsubishi - Motor speed: 1,000 rpm - Gearbox: Panamax 9000 make Sumitomo - Rotor speed: 5.6 - 55.6 rpm - Chamber hardness: 45 -50 HRC - Motor: 800 kW - 1000 rpm - 380 V, 50 Hz - Moror make: Teco - Output: 27 tons/day - Cycle time approx.: 4 - 8 min - Height approx.: 7,500 mm - Weight approx.: 35,000 kg, incl. gearbox and motor Available as an option: - Batch-off system Make: Rubikon / Mattech - Cooling bars max.: 300 mm / 2x 80 mm The data for this ad was created with ModulMWS - the software solution  ...

length: . mm width: . mm height: . mm weight: . kg FahrbahrThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1002 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributo -Hydraulic fitting: T-distributor 2 1/2 -Type: 3000-2 1/2-76.1 A3L -Number: 6x distributor block available -Price per piece -Total dimensions: 235/120/H160 mm -Weight: 17 kg/pc.

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model code: Valves 4070... see photos -Dimensions: 340/300/H400 mm -Weight: 40 kg

Refer to code 1003 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model Code: Valves 4070... see photos -Dimensions: 340/300/H160 mm -Weight: 38 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering valve, control block, steering motor -Manufacturer: Sichelschmidt, control block from electric forklift M 1510 V -Base block: Hawe SK 7650-HST3-Rö4 -Dimensions: 210/110/H130 mm -Weight: 4.2 kg

Refer to code 1004 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate -Manufacturer: SiB, hardness reference block test block -Type: 199HBW 5/750 -Dimension box: 180/170/H35 mm -Weight: 1.4 kg

Refer to code 1006 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Rix, RIX-HSS saw blade with SK40 mount -Size: 350xx3x32mm -Number of teeth: 96 teeth -Dimension: Ø 350 x 175 mm -Weight: 4.2 kg

Refer to code 1007 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1008 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1009 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1010 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1011 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1012 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...

Refer to code 1013 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...

Plummer block housings, bearing blocks -Condition: unused -Quantity: 4 pieces bearing block with bearing -Type bearing block: NTN 320 - Bearing type: UC320 -with shaft seal -Bearing: Ø 100 mm -Number: 4x available in storage -Price: per piece -Package dimensions: 550/340/H240 mm -Weight: 43 kg

Refer to code 1015 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, bi-metal saw band M42 unused -Type: Biflex Kobali M42 3660 x 25 x 1.5 mm -Quantity: 5x sheets available -Price per piece -Transport dimensions: Ø 410 / 50 mm -Weight: 0.7kg/piece

Refer to code 1017 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Gardner 800l ribbon blender 800l ribbon blender, single shaft, stainless internals, swing top lid, discharge chute, 3Ph

Metal band saw blade, band saw blade, metal saw band -Metal band saw blade: saw band unused -Type: 4125 x 26 x 1.5mm -Quantity: 3x sheets available -Price per piece -Transport dimensions: Ø 450 / 40 mm -Weight: 0.8 kg/piece

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, 10 pieces of bi-metal saw band M42 unused -Type: Biflex Kobali M42 3700 x 25 x 1 mm -Quantity: 10x sheets available -Price: complete -Transport dimensions: 800/700/H30 mm -Weight: 8.2 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: Leuco, saw blade HW -Type: 250x3.2/2.2 Z40 113 1 4 -Speed speed: n max. 7500 rpm -Dimensions of box: 320/320/H20 mm -Weight: 0.9 kg

Refer to code 1018 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Sandblasting machine, blasting machine, sandblasting cabin, sandblasting device -Manufacturer: Güde, blasting system sandblasting cabin type P1 -Interior: 580/480/H295/350 mm -Air requirement: 150 l/min / pressure 6 bar -Dimensions: 690/480/H490 mm -Total weight: 38 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: Guhdo, saw blade HM NE PRO -Type: 350x3.5/3.0 Z108 -Article No.: 2185.351.31 -Speed: n max. 5400 rpm -Use: non-ferrous profiles/plastics -Dimensions box: 385/385/H10 mm -Weight: 2.4 kg

Refer to code 1001 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Offered is a used D 36 S Delta Hybrid unit in good condition. If you have any questions, please do not hesitate to contact us.

Saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade HM NE PRO -Type: Ø 350x3.5/3.0 x 32 Z92 = T 11.95 -Art. No.: 0507-1064541X HW -Speed: n max. 5400 rpm -Dimensions box: 390/390/H10 mm -Weight: 2.3 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: EDN, saw blade HW 12 / 1459 -Type: Ø 400x4.0x32 Z96 = T 11.95 -Speed: n max. 5000 rpm -Dimensions box: 480/460/H15 mm -Weight: 3.1 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: Dress, saw blade HW -Type: Ø 420x4.0/3.2x30 Z96 TFP -Art. No.: 342031 -Speed: n max. 4500 rpm -Number: 4x saw blade available -Price: per piece -Dimensions box: / 430/430/H10 mm / / 430/430/H10 mm -Weight: 3.6 kg/piece

Refer to code 1019 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Saw blade, wood saw blade, circular saw blade -Manufacturer:Leuco, saw blade HW-topline -Type: 400x3.8/3.2x30 Z96 -Article No.: 108371-00189882 -Speed: n max. 4800 rpm -Use: non-ferrous profiles/plastics -Dimensions box: 480/460/H15 mm -Weight: 3.2 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: EDN, saw blade HW 12 / 1459 -Type: NE3 350x3.2x32Z=108neg -Speed: n max. 5000 rpm -Use: non-ferrous profiles/plastics -Quantity: 2x saw blade available -Price: per piece -Dimensions box: 385/385/H10 mm -Weight: 1,9 kg

The GM 60 S unit can be adjusted to your performance data. The blower stage is completely overhauled. If you have any questions, please do not hesitate to contact us.

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Inhouse overhauled 2015. Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Already packed in crates can be shipped immediately. Excellent machine with low working hours. Very attractive pricing. Available immediately Ask for a quote here !

fan, ventilator, blower -Manufacturer: Prein fan, fan ventilator, radial fan -Type: RES 85/42 -Voltage: 80 V / 40 W -Fan wheel: Ø 90 x 45 mm -Number: 2x blowers available -Price: per piece -Dimensions: 180/160/H140mm -Weight: 1.6 kg/pc.

fan, ventilator, blower, duct fan, tube fan -Manufacturer: VEM, fan type 2N611 -Voltage: 220 V / 30 W -Fan wheel: Ø 90 x 45 mm -Dimensions: Ø 205 x 110 mm -Weight: 1.1 kg

Refer to code 1016 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

The GM 90 S unit can be adjusted to your performance data. The blower stage is completely overhauled. If you have any questions, please do not hesitate to contact us.

fan, blower, fan wheel, cross-flow fan, cross-flow blower, cross-flow ventilator, roller fan -Fan blower cross-flow fan -Engine: EMI 105B-50110/3 -Voltage: 230V / 110/300 W / 1100 rpm -Fan wheel: both sides Ø 150 x 240 mm -Dimensions: 1040/220/H200 mm -Weight: 10 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: VEB, side channel vacuum pump side channel compressor -Type: GR2HVX-40/290-P -Drive: VEM 1.5 kW 2840 rpm -technical data: see photo type plate -Dimensions: 400/330/H430mm -Weight: 32 kg/piece

Refer to code 1052 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.