134,906 used machines on RESALE, but how to find them? Machine Search
Cordless riveting tool, blind rivet gun, blind rivets -Transfer in current condition as seen -The device works, the batteries are defective -without: batteries -Dimensions: 345/90/H250 mm -Weight: 5.3 kg
High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.175 kW -Speed: 1310 rpm -Volume output: unknown -Connection air duct: 130 x 135 mm -Dimensions: 340/290/H130 mm -Weight: 6 kg
Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg
Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location
Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition
Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Inlet connection: Ø 600 mm -Outlet connection: Ø 600 mm -Dimensions: 1600/1400/H1800 mm -Weight: 800 kg
Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg
Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location
Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition
Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg
Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022
Hydraulic 20 T single-stand production press for the production of lightweight concrete parts Here are the technical data of the offered machine: If the press does not exactly meet your requirements profile, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Open maximum height 300 mm d) Pressing speed 4 – 10 mm/sec. ( adjustable via rotary knob ) e) Mould size 600x800 mm f) Plunger size950x600 mm g) Manual lubrication( via lubrication nipples ) h) Pressure setting from 5 T to 20 ( adjustable via rotary knob ) i) Travel 300 mm j) Construction, commissioning, instruction against separate calculation ...
Filling and closing Bloc BKM type: Varifill VF 32/8 PET with 32 filling valves and 8 head plastic screw capper with pick-and-place system year of manufacture: 2001 with Siemens S7 electric incl. Touch Panel with neck-handling system
The machine is manufactured on request. Can be produced in a length of 5500mm and 5/6 sawing units. Suitable for manufacturers of wooden pallets and small blanks. Motor power 3kW.
Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg
Scoring circular saw blade, scoring circular saw blades -two-piece, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg
Blanchierschnecke, Blancheur, Stainless steel, Heating screw, Cooling screw used, Manufacturer: KOMEN & KUIN D.V. Diameter approx. 900 mm, Drum length approx. 6000 mm Stainless steel Double-walled Drive variable gear motor 3 kW 380 / 420 V Total dimensions approx. 7000 x 1800 x 2200 m. the matching feeding screw can be found here. Changes and errors in the technical data and information excepted.
Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg
Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg
Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg
Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg
Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg
Replacement blades for cutting machines -Knife size: 127x25.4x1.1mm -Urschel: 46097 -Number: 33x available -Price: per piece -Weight: 25 g/piece
Replacement blades for cutting machines -Manufacturer: Stumabo -Blade size: 127x25.4x1.5 2GØ10.4 (90°) -Quantity: 25x available -Price: per piece -Minimum order quantity: 3 pieces -Weight: 25 g
Replacement blades for cutting machines -Knife size: 205x125x1.47 -Type: 676 FB99262 -Number: 18x available -Price: per piece
Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Replacement blades for cutting machines -Knife size: 205x63x1.47 -Type: 675 FB99261 -Number: 5x available -Price: per piece
Replacement blades for cutting machines, circular blades, round cutting blades, machine blades, -Blade size: 350x40x3 -Serial number: 2162928 -Material: 4112-22N Martensitic stainless steel -Number: 6x available -Price: per piece -Dimensions: 350/40/3 mm
Replacement blades for cutting machines -Brand: Stumabo -Blade size: 190x50x5 mm -Type: 2114662 -Number: 162x available -Price: per piece -Minimum order: 3 pieces -Dimensions: 190/50/H5 mm -Weight: 0.27 kg
Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Metal band saw blade, band saw blade -Condition: unused in original packaging -Number: 5x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 2085 x 20 x 0.9 mm
Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request
Multi-blade saw with feed belt, suitable for very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Main engine power: 3 / 4 kW Diameter of the shaft: 50 mm Length of the shaft: 800 mm Width of the feed belt: 800 mm Feed motor power: 0.55 kW Feed speed : 4 - 18 m/min Tool diameter: 300 mm Machine on a system of sliding discs for quick tool change and dimensional adjustment. As additional equipment, it is possible to process short pieces of 150 mm in length. Additional equipment: laser for marking the cut
A refurbished positive displacement blower is offered Brand: Aerzener Maschinenfabrik Type: GMB 16f13 All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.
A refurbished positive displacement blower is offered Brand: Aerzener Maschinenfabrik Type: GMB 16f13 All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.
radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow rate: 3200 m³/h -Inlet connection: Ø 400 mm -Outlet connection: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg
HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)
HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder
Rietschle side channel blowers 1.5 kW 170 / 200 (max.) m³/h
The positive displacement blower is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.
Saw blade, wood saw blade, circular saw blade -DB 05/01 -Ø 200x6.0x60 -Z24 -n max. 9500 -Price: per piece -Number: 1x available -Weight: 1 kg/piece
Saw blade, wood saw blade, circular saw blade -0402-5021202 HW -UFN - equipped -Ø 200x4.1/2.8x65 -Z36 = T 17.44 -n max. 9000 -Price: per piece -Number: 2x available -Weight: 0.7 kg/piece
Weibert WBBS 550 Log band saw The drive is via a 9kW petrol engine trunk diameter 555mm board width 530mm band saw blade stroke 540mm Min band saw blade stroke 20mm cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Wheel-D: 400mm Impeller width: 25mm Band saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-550-BEN Optional: Extension section 2.3m Aspirator Slewing timber bar: length 4,6m
SUMAB R-500 MAX Fully automatic block line with concrete batching plant. Block line is in stock and ready for delivery! Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm)
Keller Lufttechnik MKR 063-55 Fan Air range: 37,000 Nm³/h Total pressure difference 3400 Nm³/h spec. Gas weight at 20 degrees: 1.2 kg/m³ Motor power: 55 kW Fan speed 1475 rpm Year of construction 1987 Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!
MAX TRUNK DIAMETER 700 MM SUBSTRUCTURE LENGTH 6000 MM CUTTING LENGTH OF 4.8 METERS 5.5 KW MOTOR HYDRAULIC BELT TENSIONING
Saw blade, wood saw blade, circular saw blade -04 43 184 -Ø 180x4.0x60x28 -n max. 9600 -Price per piece -Number: 1x available -Weight: 0.7 kg/piece
used
Two-station machine for stacking canisters up to 10 ltr. Year of construction 2000. With PWDS and SFDR. Clamping force 200 kN. With aftercooling stations and needle bubbles. Also included is the conveyor belt for canisters. Good condition
Saw blade, wood saw blade, circular saw blade -SK-1130 AA -Ø 250x4.0/2.8x70x24 -n max. 7500 -Price: per piece -Number: 1x available -Weight: 2 kg/piece
maximum number of results exceeded
please refine your search
