135,618 used machines on RESALE, but how to find them? Machine Search
Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm
PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.
SOS Block bottom bag machine 2 plies photo cell for preprinted paper 4 colour tail end printer bottom patch and 1 colour tail end printer for bottom patch Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm
used
Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine
Manufacturer: Costa, Type: Lince, Year: 1999, Cutting widht mm: 300, Power engine kW: 58, Year :1999
all stainless steel capacity 300 L. (= ± 10CF) Double Ribbon mixing arm Dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid CE-approved 2 speeds: 16 en 32 rpm 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: herbs, ingredients, powders,…
Manufacturer: Paul, Type: Sägewelle, Cutting widht mm: 1500, Diameter saw spindle mm: 100,
Manufacturer: Homag Ziehklingenaggregat, Ausführung rechts: yes, Radiusziehklinge: yes, Steuerbar: no, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes,
Manufacturer: Homag Ziehklingenaggregat, Ausführung rechts: yes, Radiusziehklinge: yes, Steuerbar: no, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes,
Holy V-mix, Nautamix, Vrieco-, NAUTA mixer, cone mixing N.M. Holy b.v. V-mix 25,000 PLR New machine of the mixer is on your products (E.g., particle size, bulk density) and environment (E.g. ATEX zoning) adapted. -Capacity: 25,000 litres water filling -Usable volume: approx. 22,500 litres depending on the product properties -Container, lid, swing arm, mixing screw, spout housing made of V2A -Traverse normal steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified
Manufacturer: IMA, Ausführung rechts: yes, Steuberbar: yes, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, ziehend: yes, Bauhöhe: Kettenbahn 210 mm, Zustand: gut, Bauhöhe: Kettenbahn 210 mm,
The fan speed is refurbished, can be supplied as a complete unit.
Circular saw sharpening machine Vollmer Cne
Machine Type: Vapormatt VaporMate Manufacturer: Vapormatt In contrast to sandblasting, wet blasting, or VaporBlast, is the treatment of a another element added: water. This optimises the surface treatment and makes it easier to even smoother and more uniform surfaces can be achieved. The Vapormate is a highly versatile, manual entry-level system. It is a very popular system for users who need a compact system for smaller rooms or who want to test wet blasting processes before investing in a larger system. The Vapormate is equipped with all the features you would expect from one of our larger manual systems . The process of wet blasting was developed in the 1950s by the company Vapormatt. In over 70 years of further development in wet blasting, an ergonomic as well as an economical investment, the Vapormate. The integrated circulating water supply ensures that consumables ...
The fan speeds are reconditioned, can be supplied as a complete unit.
Machine type: Vapormatt PUMA Manufacturer: Vapormatt In contrast to sandblasting, wet blasting, or VaporBlast, adds another element to the treatment: water. This optimizes the surface treatment and allows even smoother and more uniform surfaces to be achieved. The Vapormatt PUMA is a high-quality and versatile manual wet blasting booth from Vapormatt, which invented the wet blasting process in the 1950s. In over 70 years of further development in wet blasting, an ergonomic and economical system has been created, the Vapormatt PUMA. Small series parts can be processed by means of an insertable basket, and a clamping device for rims makes it possible to process them. Even large workpieces, weighing up to 50 kg, can be placed on the robust stainless steel mesh. The integrated circulating water supply ensures that consumables are used sparingly. Further technical information ca ...
The fan speed is refurbished, can be supplied as a complete unit.
CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...
Type MJ1435F Feed speed (inverter) 6-35 m/min. Spindle diameter 70 mm Diameter of sawblades 250-355 mm Cutting width 300 mm Cutting height 100 mm Min. cutting length 360 mm Motor power 22 kW Total power 26,1 kW Transport dimensions 2670x1200x1500 mm Weight 1700 kg Delivery term: ~ 3 months.
Automatic multi-platform saw with leaf adjustment and part back conveyor Neumann Type: MRF 16/4.000: Technical data: Follow later!
Year of construction 1990 S/ N 24745 Machine No. 94800 Manufacturer Interholz Raimann GmbH Technical data: Width of the transport chain 430 mm The width of the shaft 650 mm Maximum cutting height 120 mm Diameter of the saw blade 350 mm Diameter of the spindle 60 mm Diameter of the sleeve 80 mm Minimum length of 69 cm 37 kW main motor Shaft speed 3000 rpm Feed motor 5.5 kW Infinitely variable 0 to 50 m / min Feed adjustable Inverter Centralised lubrication Track Automatic height adjustment of the spindle Automatic height adjustment of the rollers Upper take-off rollers Pneumatic tension rollers Centralised lubrication Overall machine dimensions: Length 330 cm Width 225 cm Height 220 cm Weight 7000 kg
RECON Part number: 1216 1230 Main bearing standard dimensions New camshaft bearings ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Thermoforming machine TLT 2600 PP-film max. 260 mm Usable web width max 245 mm ( strip length max. 120 mm ) Strip configuration 2 lane , across Indexing max. 212 mm Depth of draw max. 10 mm Film speed max. 13 m/min Cutting die max 300 cycle/minute (or 600 blisters/min) Forming station max. 110 forming cycles/min Including inspection camera Leatus
We offer a refurbished rotary piston blower brand: RKR / Robuschi Type: K70R. See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call.
2002 Blister machine Marchesini MB 440 for PVC - ALU. from 1992 Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 305 from 2002 • Continuous movement machine • Automatic blister feeding GUK leaflet folder Bar code reader Booklet feeder System coding for the cartons Range of work min. 25 x 15 x 65 mm Max. 100 x 85 x 150 mm • Speed up to 240 cartons per minute Check weigher Garvens S2 from 2000
Dear Ladies and Gentlemen, We hereby offer the following original and newly packaged AXIMAX Blue Fan. aximax axial fan NW500 Type: AXK 500-6BD2-20°-3 with attached three-phase motor IE3 3 kW; 3000 min-1; 400V 50Hz with PTC for FU operation with protective grille between impeller + motor New and unused! Hours: 0 Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de
1 shot blasting machine for paving stones make DISA type BT 125-188 = - Year of manufacture 2000, Beam hours 229, Operating hours 3605 - Permissible document width 12501 mm, permissible. Passage height 500 mm, flow speed 2-10 m/min (infinitely adjustable via frequency converter), belt conveyor center distance 11.7 m, permissible load of the belt conveyor 1000 kg/lm, extracting air volume approx. 125 m³7min, blast wheel diameter 380 mm, blast wheel speed (infinitely adjustable via frequency converter)1800-2800 ulmin, Abrasive recommended gr. S 280; S330, Steel medium requirement for initial replenishment approx. 300 kg, incl. ventilation system
Thermoformer - UPS4 Year - 1993 Min. - Max. Forming width - 62 - 226mm Cycles - 15 - 50 cycles/minute Forming depth - PVC - 12mm ALU - 10mm Blister Format - Min. - 60mm Max. - 140x39mm Punching Area - Length - 226mm Width - 284mm Forming Film width - Min. - 100mm Max. - 298mm Lidfoil Width - Min. - 100 Max. - 298 Tooling - PVC/Alu - 6 Blister line size 39x94mm Alu/Alu - 7 Blister line size 38x86mm Machine Control- PacControl version 2.17 Camera – not included Hapa Printer - H-231-1
6,930 liters of cream tanks / cream tanks with V2A agitator insulated Properties: Volume 6930 L Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Insulation 80 mm Total height 2500 mm Cylinder height 1250 mm Inner diameter 2600 mm Outer diameter 2760 mm Number of feet 4 Vertical design Description: Topsoil: Cone base 2 x crane eye Threaded Sockets 2 x CIP Ball Manhole Ø 510 mm Agitator motor with reinforcement profiles Ventilators Tank cylinder: Paddle agitator Dip shaft sleeve for temperature display Subsoil: forward-drawn residual drain pipe with disc valve 4 feet with dome height adjustable
lister machine Marchesini MB 440 for PVC - ALU from 1994. Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 355 from 1994 Continuous movement machine Automatic blister feeding Check weigher Garvens S2
used
We offer a refurbished rotary piston blower brand: RKR / Robuschi Type: K80R. See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call.
High pressure axial tube fan 1000mm 7.5 kW Nuaire SC1000LC4KGX-0JM6 several pieces for sale Air volume 32000m³/h at 420 Pa delivery head Several pieces for sale, high pressure duct fans, excellent for various cooling and ventilation applications. manufacturer: NUAIRE Type: SC1000LC4KGX-0JM6 year of manufacture: 2021. completely NEW! several pcs Technical data: glass fiber reinforced polyamide blades Adjustable blade angle diameter Ø 1000 mm Anodized aluminum motor motor power 7.5 kW / 400/50Hz/ 1460 rpm, 17.76 amp -50/+60ºC (Stop/Start) minimum operating temperature in standard version Anchored housing Plastic blades Dimensions external size 1106 mm / depth 570 mm including motor weight: 136kg
Blister machine Harro Hoeflinger model PFM 1 year of manufacturing 1992 . the machine has universal feeder , camera for product control . The machine has the following formats dimensions o blisters : 70 x 115 mm / 56 x 96 mm / 62 x 94 mm / 74 x 123 mm / 123 x 60 mm / 45 x 92 mm / 100 x 86 mm / 106 x 75 mm / 56 x 110 mm / 70 x 98 mm
The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call us.
Nicotra Gebhardt P2M Process Air Fan Housing fan with direct drive without coupling – single-sided suction Robust industrial designs Durable, easy to maintain High efficiency, quiet operation Individual solutions at a standard price Certified and assured quality according to ISO 9001 Technical data measured according to DIN 24163 Accuracy class 2 according to DIN 24166 Spiral Molded Housing Robust welded construction Housing positions in 90° steps Individual installation position Radial impeller Wheel diameter 500 mm Backward curved blades Welded Dust repellent Materials: Steel coated, hot-dip galvanized, stainless steel 1.4307 ATEX: Category 2 and 3; Gas and dust Manufacturer: Nicotra Gebhardt Volume flow: 8000 m³/h dPt: 1070 Pa Density: 1.2 kg/m³ Tmax: 80 °C N: 1460 1/min n max: 2511 1/min PW: 3.10 kW Ins/Eff= B/total L (13/15): 61/64 ...
Power installed :11 Kw. Power consumption :5,5 Kw. Production :15, 50 strokes per minute for 12 mm depth forming 15, 40 storkes per minute for 28 mm depth forming Index :Max. 145, 222 mm Format range :forming area 220 mm length 188mm width Depth forming :12 and 28 mm, forming reel : 460 mm, covering reel :Max. 300 mm Forming thickness :Min. 0,1 mm, max. 0,5 mm Width covering foil : min. 90mm max. 210mm, of the internal reel : 70..76 water consumption :aprox. 0,1 m3/h. Compress air consumption :aprox. 6 Nm3/h , without pre heating :aprox.14Nm3/h, with pre heating
A generally overhauled rotary piston blower brand is offered: Aerzener machine factory Type: GM 4 S See pictures. All our overhauled blowers are equipped with new bearings and density elements. If you have any questions, please call.
- Manufacturer: Bekum - Machine type: 506D - Stations/Stations: Double Station /doublestation - Clamping Force: 170 kN - Built: 2003-Retrofit in 2021 by UES - Location/ Location: UES warehouse / UES warehouse - Control type/ Control system: New B&R control by UES/ New B&R Control by UES - WBK / Parison control: 100 points /100 points WBK - Extruder | Extruder: Grooved barrel extruder S 100/24D - Hose head/ Parison head: On request / on request - Shape dimensions mm/ Mold dimensions mm (A length/length x W width/ width x C depth /depth): 550/500/2150 - Bottle volume Max./ Bottle volume max.: 15/ 20 lit. - Screen language / Monitor language: English/ German - Accessories/ Accessories: On request - Weight/Weight (kg): 12000 - Price /Price: On request / on request
1 x Francis Shaw model K4 intermix, Machine number: 4549, Original Year of manufacture:1992, Chamber volume: 91 litres, Batch weight: approx 76kg (at 70% F.F. and 1.2 S.G), Hydraulic hopper, Hydraulic drop door with linear actuator, Full unidrive David Brown gearbox - power rating 450kW, ratio 29.065:1 (input speed 1500rpm, output 51rpm), In good condition, but currently without motor or controls. Manuals/drawings available.
Used blow moulding machine made by KRONES model Contiform S18. New 2004. It has 18 blow moulding stations. The maximum blow moulding speed is 24,000 bottles per hour for the 2.0 l format and 28,000 bottles per hour for the 1.5 l format. In February 2024, the machine was upgraded to support the PCO 2622 thread. The blow moulding machine has an integrated control system with visualisation in Polish, English and German. A complete set of documentation is included with the blow moulding machine. The blow moulding machine includes: an automatic glycol cooler, an automatic preform feeder, an automatic preform basket tipper and a bottle ejector mounted on an air transport conveyor.
Machine code: IT352 Manufacturer: Uhlmann Model: UPS300 Year of construction: 2001 Uhlmann This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size. The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment. PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across ...
Used blow moulding machine made by SIPA model SFR24. New 2007. It has 24 blow stations. The maximum blow speed is 38,000 bottles per hour for the 1.75 l format and 41,000 bottles per hour for the 1.5 l, 1.25 l, 1.0 l and 0.7 l formats. The device has an air recovery system and linear optical control for testing the quality of preforms. Supported thread type: PCO 1881. The blow moulding machine has an integrated control system with visualisation in Polish, English and Italian. A complete set of documentation is included with the blow moulding machine. The blow moulding machine includes: an automatic air-cooled chiller for supplying the machine with cooling water, an automatic preform feeder, an automatic preform basket tipper and a bottle ejector mounted on an air conveyor.
QTY 1 x TMP (Division of French Oil, USA) Techni-Mix Lab Mixer, Model HD-5, Year of manufacture: 2014 (New), CE Marked, Mixing capacity: 5 Litre, 2 wing tangential rotors, Pneumatic hopper, Tilting body discharge (easy for cleaning), 20HP AC variable speed motor, Rotor rpm - Front 47.55rpm, Rear 39.28rpm. Complete with Electrical controls and in excellent condition.
Part Number: 7807 SPECIFICATIONS - track width 350mm - cutting width 350mm - blade diameter from 355 to 505mm - cutting height 10-170mm - spindle diameter 80mm - table top dimensions 1900x790mm - height from the base to the tabletop 830mm -in advance - 2 rows of ratchets/fluffers - 2 Slip Rollers, Smooth, Metal - shaft with saws - 2 sliding rollers, pressure – from below - guide strip - Ratchets/Fluffers -caterpillar - Electric body height adjustment - central lubrication - Infinitely variable speed control on the inverter - 4kW feed motor - main motor 75kW - Diameter of the extraction port 2x150mm - overall dimensions l/w/h 2050x1800x1800mm - weight about 3500kg ADVANTAGES – German production – DTR documentation – used multi-saw – very good condition Net price: 58900 PLN Net price: 14024 EUR depending on the price 4.20 EUR ...
PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.
maximum number of results exceeded
please refine your search
