bl used for sale

Heat blower,Dehumyd type PR3,440 W,220 V.

saw blade diameter: 70 - 230 mm sawblade width: 12 mm hole of sawblade: 10 - 50 mm grinding wheel diameter: 120 mm grinding wheel width: 6 mm grinding wheel hole diameter: 32 mm no. of teeth: 30 - 400 total power requirement: 0,33 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,70 x 1,70 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 1800 mm workpiece height: 750 mm Travel: 4000 mm table width: 5500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATALOG NO. 6913 TECHNICAL DATA - track width 360mm - roller width 350mm - max disc diameter 350mm - disc hole diameter 80mm - max cutting height 120mm in advance: - pawls - pulling shaft, toothed - pawls - smooth sliding shaft - shaft with saws - sliding, pressure roller from down: - 2 sliding rollers in front of the table top - runner - pawls - caterpillar - central lubrication of the track - electric lifting of the shaft with saws - electric lifting of the body - smooth adjustment of the feed speed - feed motor about 2.5 kW - main engine 30kW - overall dimensions length/width/height 2500x2300x1900mm - weight about 4000 kg ADVANTAGES – Czech production – 2 sliding rollers in the top - used multi-blade - very good condition Net price: PLN 59900 Net price: 12882EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with large ...

CATALOG NO. 6911 TECHNICAL SPECIFICATIONS - track width 350mm - shaft width 370mm - max cutting height 200mm max dial diameter: - on the upper shaft 340mm - on the bottom shaft 300mm - disc bore diameter 80mm in advance: - repellers - 2 pressure sliding shafts -Pressure - shaft with saws 37kW - 2 smooth sliding shafts from below: - introductory table + guide strip - repellers -caterpillar - shaft with saws 37kW -caterpillar - 1 output shaft, slip, smooth - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the upper body up / down 1,1kW - automatic central lubrication - electrically adjustable smooth regulation of the feed speed 3kW - diameter of extraction connection 230mm, 250mm - dimensions length / width / height 3000x2300x1900mm - weight about 5000kg ADVANTAGES – Italian production – two-shaft – used multi-saw, very good condition Net price: 19890 ...

BLASTING & PAINTING SYSTEM DMK Co. CONSISTING OF: Air Blast Units, Vacuum Recovery System, Silo Tank. Dust Collector, Bucket Elevator, Rotary Separator, Storage Tank, Chute Hopper, Vacuum Recovery, Collection Tank, Ventilation System; MAIN CHARACTERISTICS: SHOP B (2008/2009); DMK Co.; This system consists of blasting, conveying, restoring, and impinging facility; Room size: W: 50.000 x L:50.000 x H: 17.000; 16 Nozzles, cap 32 ton/hr; Turbines 1509 KW; Abrasive: Steel Grit 0,5mm -1,0mm; Initial Charge Grit: 300 Ton; PAINTING SHOP; Room size: W: 50.000 x L:50.000 x H: 17.000; Dry filtering method; Motor 960KW BLASTING SHOP Ventilation System Dehumidifier (YDHM-CDH-15,000-100) - 1 Unit Fan and blower 120hp - 2 Units per exhaust pipe - 4 units total Exhaust pipe for 120hp fan- 2 units Fan and blower 40hp - 1 Unit Exhaust pipe for 40hp fan - 1 unit Dust Collector Ma ...

Thickness of sanding paper: 1,3 mm Width of sanding paper: 41, 54 mm Length of sanding paper: alle Längen mm Sharpening pitch: 3-4/4-6/5-8/ bis 10-14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi-automatic for the production of PET bottles - ZENTRONIK ZR-7 with two forms. The device is used for the production of PET bottles from semi-finished products. 1. Heating furnace for heating PET preforms - 24 kW (dimensions: 1500mmX50mmX1320mm) 2. Semi-automatic PET bottle making machine (dimensions: 1900mmX630mmX1420mm) 3. Bottle mold: single hole mold for 5 liter bottle. ATTENTION! It is possible to convert the machine into a different bottle format for a fee, e.g. a 0.5-liter double-cavity bottle or any other shape and capacity depending on the needs of the buyer. Technical condition: very good as new

CATALOG NO. 6887 TECHNICAL SPECIFICATIONS - track width 340mm - shaft width 350mm - max disc diameter 400mm - blade bore diameter 70mm - max cutting height 130mm in advance: - 2 rows of ratchets - 2 smooth pressure shafts, slip shafts -Pressure - shaft with saws - 2 smooth pressure shafts, slip shafts from below: -Guide -Triggers -caterpillar - smooth regulation of feed speed - electric body lifting - main engine 37kW - feed motor 1,5kW - central lubrication - table top dimension 1930x840mm - dimensions length / width / height 2250x1650x1600mm - weight 2900kg – Italian production – used multi-saw – very good condition Net price: 49900 PLN Price without tax: 11213 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Catalog number 6728 TECHNICAL SPECIFICATIONS - max cutting height 120mm - max element width 700mm - working width of the shaft with saws 640mm - max saw diameter 400mm - disc bore diameter 90mm in advance: -Triggers - 2 pulling shafts, toothed from below: - 2 pull shafts, smooth - shaft with saws - pulling shaft, smooth - lead rollers, slip, metal 12pcs - 3 Types of feed speed - feed motor 4,4kW - motor 30kW - machine dimension length / width / height 3200x1420x1350mm - weight about 3000kg ADVANTAGES – Polish production – solid construction – used machine, very good condition Net price: 49900 PLN Price without tax: 11213 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

CATALOG NO. 6889 TECHNICAL SPECIFICATIONS - max cutting height 140mm - max element width 700mm - working width of the shaft with saws 660mm - max saw diameter 400mm - disc bore diameter 90mm in advance: -Triggers - 2 pulling shafts, toothed from below: - 3 slip rollers, metal introduction - 2 pull shafts, smooth - shaft with saws - pulling shaft, smooth - 3 metal output slip rollers - feed motor about 2kW - motor 30kW - machine dimension length / width / height 2660x1320x1900mm, - weight about 3000kg – Polish production – used machine, very good condition Net price: 49900 PLN Price without tax: 11213 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Thickness of sanding paper: 1,1 mm Width of sanding paper: 34 mm Length of sanding paper: alle Längen mm Sharpening pitch: 3-4/4-6/5-8/ bis 10-14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Catalogue number: 6746 TECHNICAL SPECIFICATIONS - track width 450mm - shaft width 550mm - disc bore diameter 80mm - min disc diameter 250mm - max disc diameter 400mm - max cutting height 250mm - max width of input material 900mm - min length of the workpiece 800mm in advance: - 2 rows of repellers - pulling shaft, toothed, pressure shaft - repellers - pulling shaft, toothed, pressure shaft - shaft with saws - pulling shaft, toothed, pressure shaft from below: - metal roller, slip - repellers -caterpillar - shaft with saws -caterpillar - smooth regulation of the feed speed on the inverter 0-40m / min - main motors 2x90kW - feed motor 7,5kW - electric body lift up / down 0,75kW - electric shaft adjustment with saws 2×0,75kW - central lubrication - diameter of extraction connection 330mm, 270mm - dimensions length / width / height 3150x2270x2560 ...

Krosownice in good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Thickness of sanding paper: 1,6 mm Width of sanding paper: 54, 60 und 80 mm Length of sanding paper: alle Längen mm Sharpening pitch: 3-4/4-6/5-8/ bis 10-14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 15 to Stroke: (stepless) from: 200 s/min up to: 500 s/min Execution: 4 supports Table surface: Length: 320 mm Width: 250 mm Thickness: 60 mm Table relieving: Length: 250 mm Width: 140 mm Cut edge: 300 mm2 Slide adjustment: 60 mm Slide stroke: 24 mm slide bore diameter: 25 mm Distance table to slide nose: max: 211 mm Passage between the supports: longitudinal: 320 mm Lateral: 170 mm Voltage 50 Hz 3x: 380 Volt Power: 3.5 HP Machine´s weight about: 1800 kg Overall dimensions machine: Length: 1350 mm Width: 850 mm Height: 1950 mm Various accessories: Automatic feed: number: 2 Execution: rolls max. stroke: 100 mm Straightening device

Key data: 15 , 500

Capacity: 15 t Number of strokes per/min: 500   Table length: 0 mm Table width: 0 mm Technical data Pressure: 15 to Stroke: (stepless) from: 200 s/min up to: 500 s/min Execution: 4 supports Table surface: Length: 320 mm Width: 250 mm Thickness: 60 mm Table relieving: Length: 250 mm Width: 140 mm Cut edge: 300 mm2 With pressing power: downside up Slide adjustment: 60 mm Slide stroke: 24 mm slide bore diameter: 25 mm Distance table to slide nose: max: 211 mm Passage between the supports: longitudinal: 320 mm Lateral: 170 mm Voltage 50 Hz 3x: 380 Volt Power: 3.5 HP Machine´s weight about: 1800 kg Various accessories: Automatic feed: number: 1

Pallet size 1.270 x 1.050 x 125 mm Production area Max. 1.240 x 1.000 mm Block height Max. 500 mm Min. 50 mm Year 2006 With Spare parts (pumps, motors etc..) With 5 pieces molds and 300 pieces metal pallets Machine maintained than dismantled

Two-station machine up to 3 ltr. Extruder 70/24D. Triple head 85 mm center to center. Moog TMC 3 control. Triple Proportional control for mold / carriage / calibration. Leak test pre-staged

1000 litre bottom flap mixer with ploughshares 3 kw-67 rpm Chain drive

Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Type: SBO 4 Year of prod. 1992 Capacity: 4000 pcs/h Number of moulds in the machine: 4 Preform feeder: yes Two types of molds included: 1.5 L and 2.0 L Chiller: RIEDEL Technical condition: used

W&H Block bottom heat seal machine for air sickness bags

Used, well-preserved set of barrel / screw

Hose head with WDS. Nozzle up to 120 mm. Available from stock

Head type: 3-SH/60-125-PE/T (DeCo) ​Marke/ Brand: UES Condition: New/ New Layers : 2 Center distance: 125 mm Nozzle/ Die: 60 mm Hoses/ Parisons: 3 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Head type: 5-BKZ-40-110 (A 100) ​Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Center-distance: 110 mm Nozzle/ Die: 40 mm Hoses/ Parisons: 5 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Head type: BKZ-40 (A 60) ​Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Nozzle/ Die: 40 mm Hoses/ Parisons: 1 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Head type: 2-BKD-51-125 (A 70) ​Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Center-distance: 125 mm Nozzle/ Die: 51 mm Hoses/ Parisons: 2 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

The blower is installed in a soundproof hood with base frame, safety valve, check valve and attachments. The drive motor can be designed according to customer specifications. The compressor stage has been overhauled. You can also purchase only the GM 80 L stage. If you have any questions, please do not hesitate to call.

complete 230kW

Technical specifications: Cutting width mm: 310 Cutting height mm: 120 Chain width mm: 340 Workpiece length min mm: 700 Saw blade diameter max mm: 360 Feedrate max/min: 5/48 Saw revolutions rpm: 3900 Working height mm: 850 Motor Kw: 37 Weight Kg: 3500

We offer a Liebherr G944 for sale.

We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne

Refurbished blower Werner & Pfleiderer RC 2 4260 RB Power 37 kw, 50 m³/min, 1270 mm water column Air intake 160 mm ø, GL 180° 115 mm ø blow-out, New bearings, V-belt new, With basic frame and vibration damper New engine installed (Solan )

We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne

PAUL K30U/800

USED LÖDIGE FKM 2000D STAINLESS STEEL 2.000 LITRES BLENDER REF#: C5725 Lodige FKM2000D mixer with a total volume of 2000 liters manufactured in 316 stainless steel. Two inspection doors with a 55 kw geared motor completely reconditioned. General characteristics: Manufactured by LODIGE Model FKM 2000D Material Stainless steel 316 Year built 1973 Weight 3700 kg (2060 kg + 1640 kg motor and reducer) Technical characteristics: Capacity 2,000 L (800-1,400 L useful) Motor characteristics: Manufactured by SCHORCH Voltage 400/690 V Current 94/55 A Power 55 kW Frequency 50 Hz cos(fi) 0.89 Rotational speed 2960 rpm Reducer characteristics: Manufactured by ELENDER Model SZBW 250 Ratio 0.04 Rotational speed 120 rpm

USED BLISTER PACKING MACHINE REF.: E0011 Description: SIEBLER HM1 1/160 blister packing machine manufactured in 1997 by ROMACO. With a power of 6.5 kW.

USED PRECISION GEARS LTD TR-100 BLISTER BACKAGING MACHINE REF.: E0034 PRECISION GEARS LTD blistering machine to blister tablets, capsules, dragees, etc. For PVC / Aluminum blister Model TR-100 Year 2000 Batch marker for incision, pre-cut, cut, Production of 50/60 strokes per minute, depending on the selected blister size, up to 240 blisters per minute. Maximum format size 190x130 mm. Current format blister of 10 capsules of 170x 100 mm General characteristics: Manufactured by PRECISION GEARS LTD Model TR-100 Year built 2000

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; heat deflector; Stand-standing device. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

from 500 euro Many different blind stitching machines in the warehouse for every operation

Blind stitch machine with thread cutter with interval with 380 volt motor, Completely up to date

Hobart GR. 5 cream blowers Cream machine 5 liters Stainless steel with stirring blade 220 V 50Hz

Two-station machine with double head for container 5 ltr in double cavity or triple head for subject 500 - 950 ml. Extruder S 100. With removal robot, conveyor belts for bottles and waste. Mill, cooling unit, material handling. 380V 60 Hz

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 400 to Stroke: (stepless) from: 12 s/min up to: 40 s/min Table surface: Length: 2500 mm Width: 1500 mm Slide adjustment: 100 mm Slide stroke: 300 mm Fixed stroke: 300 mm Slide surface: Length: 2500 mm Width: 1500 mm Distance table to slide nose: max: 800 mm Passage between the supports: longitudinal: 3240 mm Lateral: 1600 mm Air connect: 5.5 bar Total installed power: 40 kW Machine´s weight about: 70000 kg Overall dimensions machine: Length: 4300 mm Width: 2500 mm Height: 7000 mm

Well maintained machines. Extruder 50/20D. Double head 100 mm stitch.