bl used for sale

Vollautomatische Hochgeschwindigkeits Kaschiermaschine / Fully automatic Sheet-to-Sheet Laminating machine Lamina Blackline Auto 1110 Year 2009 - Serial-No. 23343509 Format max. 1100mm (width) x 1600mm (length) Sheet Width min. 350mm (13¾”) Sheet Length min. 350mm (13¾”) Feeder Capacity Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Speed 5000 sheets / hour Top Sheet 130 to 450g/m2 1 pts = 28,25g/m2 Bottom Sheet From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 Corrugated from 0,6 - 10 mm (0,016” - 0,39”) Registration Accuracy Up to 0,2mm (0,008”) Total Installed Power 5,0 kW Electrics 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Machine size (widthxlength) 2050mm x 460mm - weight 2800kgs

Blobel Spill Barrier can be rotated on one side The ideal solution if you want to secure the area of a lifting platform or dock leveller. The barrier is stationary and can be rotated on one side, easy to handle, versatile and flexibly convertible from manual to automatic. The rotating and clamping device is permanently mounted next to the opening to be secured and sealed against the structure. The locking body is screwed into the swivel joint and stands vertically next to the opening in the resting position. It is secured against unintentional folding down in accordance with the UVV. In the event of an emergency, the fuse is unlocked, the leak lock is folded down and locked in the clamping device. The contact pressure of the clamping lever is adjustable, ensuring a secure seal. In the basic version, the barrier body is folded down manually, and an automatic system can be ...

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial-No.: 637 Contact length., effective: 1600 mm Gum pad width: 180 mm Design: smooth gum pads at the bottom and top Haul-off force: approx. 20,000 N Haul-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm (LxWxH) Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

MECCANOPLASTICA GRANULATOR, type BLC1000, 1.000 mm wide rotor, 75 kw.drive, hydraulic pack for opening the machine, including loading conveyor belt, metal detector, CEIA, extraction blower, conatructed in 2001, offered reconditioned, installed power - used power in work: about 60-65% : 75 kw, availability: 4 weeks from confirmation, working width: 1000 mm., options available: CEIIA metal detector + loading conveyor belt + extraction blower, conditions: will be reconditioned, type: BLC1000

Blum TC50 touch probe with SK50 tool holder Manufacturer: BLUM Type: TC50 Interface: SK50 Application: Stylus for workpiece measurement Condition: used Price without VAT Country of origin: Germany Pieces: 1

4-axis CNC horizontal milling machine Hüller Hille BlueStar5 built in 2007 automatic pallet changer with 2 interchangeable pallets with 4 vices each (125), 4 additional interchangeable pallets (one with mineral casting clamping tower), Renishaw measuring system, high-pressure coolant system with additional filter device, coolant and air through the spindle, 40-fold tool magazine BT40, Operating hours and control see photo

Turning trolley for sheet metal 58 x 98 cm, Fabr. Anneliese Mertes

meta BLPS 304 II for the measurement of organic soil contamination. Software Version 1.12 Supplied without sampling probes More items - new and used - can be found in our shop! International shipping costs on request!

Bluhm Systeme Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. The system with its small dimensions of 188 x 80 x 98 mm can be easily installed in or on production plants. The print head reaches top speeds of more than 180 m/min and has IP-65 protection class. The printing system is equipped with a display for data entry as well as changing and checking system settings. Operators can check or change variable print information and settings directly on site on the user-friendly display. Intuitive control is via an i-Logic button. In addition, maintenance statuses can be shown on the display. The Integra One is particularly compact with dimensions of 188 x 80 x 98 mm and was specially developed for system integration. Smart cartridge monitoring Intelligent SmartCard Cartridge Monitoring identifies the current ink type and autom ...

The machine is in good technical condition, testing is possible by prior arrangement.

Fiber laser cutting machine Type: LT 9 Manufacturer: BLM Adige-SYS Year: 2013 Control: Siemens Sinumerik Laser: IPG YLS 3000 Precitec ProCutter head Machine hours: 30000 Table: 1500 x 3000 mm Max plate thickness: 20 mm Min plate thickness: 0,5 mm The machine includes a license and software for creating Lantek cnc programs. In good condition, fully functional. Find more here - / Contact us at -

Manufacturer: Bystronic Model: BLT 4000 Year of Manufacture: 2001 Type of Machine : C02 Laser Find more here - / Contact us at -

The machine is in very good condition and ready for operation. An on-site inspection is possible.

Height=1.99 m, Overall length= 0.81 m, Overall width= 1.52 m, Net weight= 310 kg,

Height=1.998 m, Overall length= 0.801 m, Overall width= 0.686 m, Net weight= 161 kg,

Key data: 6300 mm, 11200 mm, 4800 mm

Completely retrofitted Single Column Vertical Turning Lathe Blansko model SKSJ 1A equipped with one vertical head for turning and milling operations Technical characteristics: Face plate diameter 6300 mm Max. swing with moved out arm 11200 mm Maximum height of the workpiece 4800mm Max. turning diameter with column near the faceplate 8000mm Max. diameter of work piece clamped on floor grid (for internal processing) 14700mm Infinitely variable rotation of the faceplate 0.5 – 20rpm Max. work piece weight 100ton Milling spindle max. speed : 1000rpm 2 speed gear box with 15KW Siemens motor Manual clamping ISO 60 taper tool The machine was completely retrofitted during 2024-2025 and supplied wi ...

thread dia.: M5 - M24 turning speeds: 70 - 200 U/min working area: max. 1200 R angle adjustable from - to: 0 - 90 Grad voltage: 230 V engine output: 1200 W weight: 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous met ...

thread dia.: M6 - M36 turning speeds: 30 - 150 U/min working area: max. 1200 R angle adjustable from - to: 0 - 90 Grad voltage: 230 V engine output: 1200 W weight: 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change ...

length: 1500 x 740 x 780 innen mm weight of the machine ca.: ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4000w IPG / 3D Head / 8500mm bundle loader / 8500mm single bar loader / 6500mm unloader

A fully equipped bistro is available. Components: 1) Dish conveyor dishwasher. 2) Furniture. 3) Small and large kitchen equipment. 4) Customer furnishings such as tables, chairs, and self-service counters. 5) Refrigerators. 6) Deep fryers and grills. 7) Cash registers and scales. 8) Dishes, plates, etc. 9) Extraction and filtration technology. Documentation available. An on-site inspection is possible.

The machine is in good technical condition, testing is possible after prior agreement. The machine can also be sold with a stock of measuring probes, clamping plates, and connecting elements.

4000w IPG Loading 8500mm Unloading 6500mm 3D HEAD Under power and can be inspected upon request

Height=1.82 m, Overall length= 0.91 m, Overall width= 1.48 m, Net weight= 365 kg,

Height=1.998 m, Overall length= 0.801 m, Overall width= 0.686 m, Net weight= 161 kg,

Blackfriars Rotary Cutter / Granulator Model 12 ASHD/267 With sound booth

Ref. No. 00891 Name of the Tube Laser Cutting System Manufacturer: BLM Adige Model LT 652/B Year of construction 2002 Laser power 2000 watts Loading length Unloading length Loading length 6500mm and unloading length 3500mm. In 2024, 40,000 euros were invested Operating hours 3 shifts Computer 127,653h Heating HF tube 62.850 h High voltage 119,453 h From order confirmation at the time of purchase Lasertube LT652 Automatic feeder for pipes between 3200 and 6500mm Fully automatic pipe support and unloading device for pipes up to 4500mm Siemens Sinumerik 840D control system Teleservice incl. modem CO2-Slab-Laser Model DC020 Kompakt, Fabr. Rofin Sinar Hamburg Integration RF DC020 Compact Laser Cooling Unit Fine dust filter, Fabr. Donaldson Torit Universal AK-HP Cutting Head, Fabr. Precitec Gaggenau Precitec Interchangeable Cassettes AK-HP 5" HP ZNSE 5"  ...

Block DTT 10000 Transformer Manufacturer: Block Type: DTT 10000 10000 VA 50-60 Hz Schaltgr. Dyn 5 Code: 9129 IP:23 Primary: 500 V 12A Secondary: 399/231 V 380/220V 361/209V 15.15A HxWxD: 580 x 700 x 430 mm Weight: approx. 170 kg More items - new and used - can be found in our shop! International shipping costs on request!

New log wagon inclined 17° Timber lengths 2 – 5m Diameter 200 – 1000mm Tension trestles 3 pieces Clamping trestle opening 1000mm Longitudinal adjustment 1 trestles adjustable – 2 trestles fixed Clamping claw opening 900mm Clamping block adjustment servo-electric Cable drive 45kW

Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible.

Cryovac BL14 Semi Auto bag loader 2020, Stainless, semi automatic bag loader, 1Ph

Frozen block cutter Manufacturer: Magurit Stainless steel Cutting dimensions: maximum cutting size 750 x 480 x 240 mm Motor: 4 kW hydraulic Power: 400 V / 50 Hz Dimensions: 1700 x 1100 x 1850 mm 3 knives

7 pallets, Overall dimensions: 1.30 x 0.40 m, Cover dimensions: 1.25 x 0.36 m, including ridge caps and edge strips, and ridge vent caps, galvanized sheet metal, palettes from left to right, - Palette: approx. 268 pieces powder-coated, - Palette: approx. 258 pieces powder-coated, - Palette: approx. 335 pieces of galvanized sheet metal with anthracite powder-coated finish (smooth), - Palette: approx. 304 pieces powder-coated + 4 ridge caps, - Palette: approx. 262 pieces powder-coated, 11 pieces red powder-coated, 18 pieces edge cover, 5 pieces ridge vent caps, - Palette: approx. 111 pieces powder-coated, 30 pieces edge cover, 20 pieces ridge caps, - Palette: approx. 225 pieces powder-coated

Two identical Blitz compressors are available. Motor power: 22kW, max. operating pressure: 10bar, flow rate: 3m³/min, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Ghioldi single layer blown film extruder, suitable for LDPE and MDPE, extruder with 55 mm Ø screw diam., lever screen-changer, Rotating head, 150 mm Ø die, calibrating cage, pull off unit, gusseting units, Cason corona treatment, 1.100 mm single winding station, Tower included, complete with manuals, electrical drawings, CE compliance

Output: 9000 U/h // Bottle Size: 5ml-2l

Travel X/Y/Z: 700mm/630mm/700mm, max. workpiece dimensions X/Y: 750mm/700mm, pallet clamping surface X/Y: 500mm/500mm, max. pallet load capacity: 500kg, tool holder: SK40, feed rate: 50m/min, rapid traverse: 50m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.001mm, spindle speed: 12000rpm. Machine dimensions X/Y/Z: approx. 4000mm/3800mm/3000mm, weight: approx. 12500kg, control: Fanuc Series 21i-MB, operating hours: approx. 42400h, spindle hours: approx. 11500h. Includes Renishaw OMP 40-2, central lubrication, and 4 pallets. Documentation available. On-site inspection possible. Expected to be available from January 2026.

output: 22 kW suction power: 3.020 l/min turning speeds: 4.860 U/min overpressure: 10 bar dimensions of machine L x W x H: 1,40 x 0,80 x 1,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

output: 30 kW suction power: 4.200 l/min turning speeds: 5.092 U/min overpressure: 10 bar dimensions of machine L x W x H: 1,72 x 0,90 x 1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU251U351 LocationBarneveld MakeBlackmer TypeGPI C18 I CV Mach.No.566084 Pressure Working pressure1.5 Bar Main Features MaterialStainless steel Volume18000 Ltr. Motor5.5 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity± 18 m³/h With motor5,5 kW, 1450 rpm, (Ex) Eccentric Screw Pumps MaterialStainless steel 1.4571 (316Ti) Information Year of construction2005 Mounted on framecheck Total height1 m CEcheck Floorspace1,7x0,5 m Weight350 kg ATEX compatiblecheck Extra SpecificationsSuitable for most sanitary applications, including food and beverage, pharmaceutical, and cosmetic processes, particularly those that require consistent non-pulsing flow and gentle fluid handling (low shear rate), such as:- In the food industry: flavor, sauce, chocolate, glucose.- In the beverage industry: yeast, concentrate, glucose, fruit juice, ...

General SKU366W1254 LocationBarneveld MakeVicarb Deutschland GmbH No.1502 Year of construction1989 Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface2 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface2 m² Tube capacity11 l. Max. temperature160°C Shell capacity10 l. Shell connectionscheck Cover connectionscheck Information Floorspace0,60x0,35 m Total height1,80 m Weight355 kgShell and tube heat exchangersVicarb Deutschland GmbHHeat exchangers > Shell and tube heat exchangersBrand > Vicarb Deutschland GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU366W1246 LocationBarneveld MakeVicarb Deutschland GmbH No.1508 Year of construction1989 Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface5.8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface5.8 m² Tube capacity26 l. Max. temperature160°C Shell capacity22 l. Shell connectionscheck Cover connectionscheck Information Floorspace0,60x0,60 m Total height2,15 m Weight635 kgShell and tube heat exchangersVicarb Deutschland GmbHHeat exchangers > Shell and tube heat exchangersBrand > Vicarb Deutschland GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU366W1247 LocationBarneveld MakeVicarb Deutschland GmbH No.1501 Year of construction1989 Pressure Working pressure shell5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface5.8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface5.8 m2 Tube capacity11 l. Max. temperature160°C Shell capacity10 l. Max. temperature160°C Shell connectionscheck Information Weight355 kgShell and tube heat exchangersVicarb Deutschland GmbHHeat exchangers > Shell and tube heat exchangersBrand > Vicarb Deutschland GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...

General SKU366W1277 LocationBarneveld MakeVicarb Deutschland GmbH No.1505 Year of construction1989 Pressure Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface3.7 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface3.7 m² Tube capacity19 l. Max. temperature160°C Shell capacity11 l. Max. temperature160°C Shell connectionscheck Cover connectionscheck Information Floorspace0,60x0,55 m Total height1,40 m Weight410 kgShell and tube heat exchangersVicarb Deutschland GmbHHeat exchangers > Shell and tube heat exchangersBrand > Vicarb Deutschland GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

General SKU366W1276 LocationBarneveld MakeVicarb Deutschland GmbH No.1512 Year of construction1989 Pressure Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface16.2 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface16.2 m² Tube capacity85 l. Max. temperature160°C Shell capacity56 l. Max. temperature160°C Shell connectionscheck Cover connectionscheck Information Floorspace0,70x0,80 m Total height2,40 m Weight1720 kgShell and tube heat exchangersVicarb Deutschland GmbHHeat exchangers > Shell and tube heat exchangersBrand > Vicarb Deutschland GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...

General SKU366W1269 LocationBarneveld MakeVicarb Deutschland GmbH No.1504 Year of construction1989 Pressure Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface3.7 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface3.7 m² Tube capacity19 l. Max. temperature160°C Shell capacity11 l. Max. temperature160°C Shell connectionscheck Cover connectionscheck Information Floorspace0,70x0,70 m Total height1,50 m Weight410 kgShell and tube heat exchangersVicarb Deutschland GmbHHeat exchangers > Shell and tube heat exchangersBrand > Vicarb Deutschland GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

General SKU366W1268 LocationBarneveld MakeVicarb Deutschland No.1511 Year of construction1989 Pressure Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface16.2 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface16.2 m2 Tube capacity85 l. Max. temperature160°C Shell capacity56 l. Max. temperature160°C Shell connectionscheck Cover connectionscheck Information Floorspace0,70x0,80 m Total height2,40 m Weight1720 kgShell and tube heat exchangersVicarb Deutschland GmbHHeat exchangers > Shell and tube heat exchangersBrand > Vicarb Deutschland GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to  ...

General SKU366W1238 LocationBarneveld MakeVicarb Deutschland GmbH No.1507 Year of construction1989 Pressure Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface5.8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface5.8 Tube capacity26 l. Max. temperature160°C Shell capacity22 l. Max. temperature160°C Shell connectionscheck Cover connectionscheck Information Floorspace0,60x0,60 m Total height2,20 m Weight655 kgShell and tube heat exchangersVicarb Deutschland GmbHHeat exchangers > Shell and tube heat exchangersBrand > Vicarb Deutschland GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to i ...