bis used for sale

THERMISCHE REINIGUNG PYROLYSE-OFEN Zykluszeit : 2 - 4 Stunden Beschickung : Wagen, manuelle Beschickung Isolierung : Keramikwolle + Steinwolle Dicke der Isolierung : 175 mm Höchsttemperatur : 1.260˚C Heizungsart : Direkt beheizt Heizquelle: Erdgas, Flüssiggas oder Diesel Brennkammern : 2 Sätze Überhitzungskontrolle : Wassersprühdüsen - 2 Stück Sicherheitskontrolle : Wassersprühdüsen - 2 Stück Backofen-Sicherheitstür : 1 Satz Schaltschrank : PLC-gesteuert, Schaltgeräte der Marke Schneider Electric Steuerungssystem : Bedienfeld mit Touchscreen und Softwaresystem MATERIAL Ofengehäuse : Stahlkonstruktion und Blech, spritzlackiert 1. Brennkammer: Schamottestein und feuerfester Zement, 1.400˚C 2. Brennkammer: Schamottestein und feuerfester Zement, 1.260˚C BETRIEBSTEMPERATUR 1. Brennkammer: 250 - 600˚C 2. Brennkammer: 800 - 1.100˚C Durchmesser  ...

Moisture Analyzer from Mettler Model Type HB 43 - S. The instrument powers on but and it is working but sometimes after a while it turns down. We can not fix it so we are selling it for parts as a non-working condition. The Halogen Moisture Analyzer is used for determining the moisture content of almost any substance. The instrument works on the thermogravimetric principle. At the start of the measurement the Moisture Analyzer determines the weight of the sample, the sample is then quickly heated by the integral halogen heating module and the moisture vaporizes. During the drying process the instrument continually measures the weight of the sample and displays the reduction in moisture. Once drying has been completed, the moisture or solids content of the sample is displayed as the final result. Of decisive importance in practice is the rate of heating and even heating of the sur ...

Basket size LxWxH:600 mm Max. basket weight:80 kg No. of washing chambers:1 Temperature for washing water:60 °C Electrical heating power:4 kW total power requirement:5 kW Loading:Höhe bis 300 tank capacity:50 l Capacity:60 l/min Machine size LxWxH:0,75 x 1,0 x 1,2 m

Reference Num.: 3548 Brand: Herzog Heymann Type: KL 112 Available: directly Status: In production Location: Deutschland Equipment: - Format bis 35 x 50 cm - 2 Falztaschen

: 32 /min Punching force: 60 to throat: 500 mm : 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: 2012 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 96380 UMSCHREIBUNG Volautomatische Kaltkreissäge Fabrikat Kaltenbach Model KKS 400 NA Machine Nummer 1700 - 03004 Baujahr 1982 Rechtwinkeler Schnitt Rund à 90º 130 mm Viereckig à 90º 315 x 50 mm U-profiel à 90º 24 x 85 mm Sägeblatt Durchmesser..………………… 400 mm Sägeblatt in Graden verstellbar 0 – 180 º Drehzahlen 10 – 14 – 20 UpM Hauptmotor Leistung…………………… 0,9 – 1,2 – 1,8 PS Anschluss spannung……………………. 380 Volts Zubehör Lademagazin Automatische laden bis 1700 mm Maschine Maschine ist in gutem Zustand

turning diameter: 220 mm turning length: 250 mm control: SIEMENS SINUMERIK 820 T swing diameter: 380 mm chucking diameter: 250 mm x-travel: 200 mm z-travel: 250 mm spindle turning speed range: bis 4000 U/min rapid travel - longitudinal/face: 15 m/min total power requirement: 27,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,2 x 2,9 x 2,2 m acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 125 mm drawing length: 1250 mm pulling force - max.: 5 t stroke length max.: 925 mm table surface area: 550 x 700 mm workpiece weight: 6000 kg cutting speed: 1 - 12 m/min return speed: 2 - 24 m/min feed: 0,219 mm/DH total power requirement: ca. 5 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,5 x 1,5 x 3 m - quick adjustment for the Feed - automatic return adjustment - Oil Tank with pump - 3 Tool Cabinets - large set of toolings + accessories Tools for drawing length: bis 150 / 300 / 500 / 1000 / 1250mm as shown on pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 250 mm workpiece height: 500 mm grinding diameter max.: 220 mm table surface area: 600 x 320 mm throat: 310 mm range of angles: 12 grad grinding spindle slide - vertical movement: 110 mm stroke speeds: 0 - 6 m/min. grinding spindle speed: bis 50.000 U/min. peripheral speed: max. 35 m/sec capacity: ca. 7 kVA power capacity: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 3 x 3 x 3 m Frequence converter make LANDERT, type SGU 160 - range : 150 - 1330 Hz, feed motion in the table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 1000 mm z-travel: 800 mm spindle turning speed range: 4 Stufen von spindle turning speed range: 20 - 3150 U/min spindle taper: SK 60 + SK 50 milling head -swivable +/-: 45 ° copying travel - horizontal/cross: 300 mm copying travel face: 200 mm distance spindle /table: 200 bis 1000 mm distance spindle center to column: 1120 mm table surface area: 4400 x 1000 mm table load capacity: 8000 kp total power requirement: 30 kW weight of the machine ca.: 56 t dimensions of the machine ca.: 7,5 x 5,0 x 4,4 m Machine is in an excellent condition, continuously maintained by the manufacturer • Control D + R, extended with HSM • DROOP & REIN - copy control type kc • HF spindle TDM HK 12-02, 15000 rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 1 St. Number of heads vertical: 0 St. 1 Götzinger Dübelleim- und Einpressmaschine BLE Grundgestell in stabiler Schweisskonstruktion, mit Blech verkleidet Tischauflage ca. 200 x 1160 mm Pos. 1 1 Leimstation Vollstrahlventil Leimmenge exakt einstellbar Leimpistole für Gegenlochbeleimung Pos. 2 1 Leimpumpe aus Edelstahl, Hochdruckpumpe und Leimschlauch Pos. 3 1 Einpressstation mit Dübelvereinzelung und Einpresszylinder Pos. 4 1 Schwingförderer für Dübel d 8 x 60 mm mit Zuführschlauch in das Einpressaggregat Pos. 5 1 Bearbeitungsaggregat mit Kreuztisch, Linearführung und 3-Achs-Motore X = 200 mm Bearbeitungsbreite Y = 120 mm Bearbeitungshöhe Pos. 6 1 Positioniersteuerung Touchpanel Wahlschalter für verschiedene Bearbeitungen: nur bohren nur leimen - einpressen bohren - leimen - einpressen Preis der Pos. 1 bis einsc ...

saw blade diameter: 80 - 700 mm workpiece-spindlehead motor: 0,25 kW grinding wheel diameter: 125 mm turning speeds: 2850 U/min grinding range: -20 bis +20 Grad weight of the machine ca.: 12 Kg dimensions of the machine ca.: 700 x 400 x 300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 780 mm table load: 1,0 t swivelling range: 0 - 135 Grad turning speeds: 0,15 - 1,5 U/min table height adjustment: von 780 bis 1560 mm max. torque on the faceplate: 1000 Nm welding current: 500 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 5 t swivelling range: 0 - 135 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1100 bis 1950 mm max. torque on the faceplate: 7000 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 2000 mm Tube length: 2280 mm numbers of toolholders: 3 : Rohr galvanisch Verzinkt dimensions: 2,3 x 0,3 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 5700 mm Tube length: 6000 mm numbers of toolholders: 7 : Rohr Edelstahl dimensions: 6,0 x 0,3 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 36 M turning speeds: 0-100 U/min thread: M5 - M36 M working area: 2050 Rmax. working range: 500 Rmin. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 5,5 kW weight - pallet system: ca. 500 kg Furnishing: - hydraulic threading machine - Including machine base with clamping disc - mobile - hydr. manometer - stepless speed adjustment - Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 M27 / M30 / M33 / M36 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 50,0 mm bore capacity in cast iron: 60,0 mm bore stroke: 230 mm thread dia.: bis M 36 M table surface area: 550 x 550 mm throat: 400 mm turning speeds: 54 - 1032 U/min morse taper: MK 4 feed: 0,1-0,2-0,3-0,4-0,5-0,6 U/min T - slots - width: 30 mm column diameter: 200 mm engine output: 4,0 kW weight: 720 kg range L-W-H: 600 x 1600 x 2450 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 24 M turning speeds: 0-600 / 0-150 U/min thread: M5 - M24 M working area: 2050 Rmax. working range: 500 Rmin. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3,0 kW weight - pallet system: ca. 300 kg Furnishing: - hydraulic threading machine - Incl. machine frame with clamping disc - mobile - hydr. manometer - stepless speed adjustment - Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 60,0 mm bore capacity in cast iron: 70,0 mm bore stroke: 260 mm table surface area: 600 x 600 mm thread dia.: bis M 42 M throat: 420 mm turning speeds: 64 - 1210 U/min morse taper: MK 5 feed: 0,1-0,2-0,3-0,4-0,5-0,6 U/min column diameter: 220 mm T - slots - width: 30 mm engine output: 5,5 kW weight: 820 kg range L-W-H: 650 x 1600 x 2640 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 16 M turning speeds: 0 - 600 U/min thread: M 5 - M 16 M working area: 2050 Rmax. working range: 500 Rmin. work height max.: 900 mm table surface area: 800 x 1000 mm oil volume: 100 l engine output: 3,0 kW weight - pallet system: ca. 250 kg Furnishing: - hydraulic threading machine - Incl. machine frame with clamping disc - mobile - hydr. manometer - stepless speed adjustment - Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mm table load: 3 t swivelling range: 0 - 135 Grad turning speeds: 0,07- 0,7 U/min table height adjustment: von 980 bis 1750 mm max. torque on the faceplate: 4500 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 3000 mm Tube length: 3280 mm numbers of toolholders: 4 : Rohr galvanisch Verzinkt dimensions: 3,3 x 0,3 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mm table load: 8 t swivelling range: 0 - 130 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1210 bis 2238 mm max. torque on the faceplate: 1200 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 5000 mm Tube length: 5280 mm numbers of toolholders: 6 : Rohr Edelstahl dimensions: 5,3 x 0,3 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 4000 mm Tube length: 4280 mm numbers of toolholders: 5 : Rohr Edelstahl dimensions: 4,3 x 0,3 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 130 mm spindle bore: 18 mm ratio: 40:1 swivellable: - 10° bis 90° ° groove width: 16 / 18 mm weight: 35 kg dimensions of the machine ca.: 0,5 x 0,25 x 0,25 m Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickness of sanding paper: 1,3 mm Width of sanding paper: 41, 54 mm Length of sanding paper: alle Längen mm Sharpening pitch: 3-4/4-6/5-8/ bis 10-14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt width: variabel Belt length: bis 14000 mm Total belt loading: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 1500 bis 6000 mm spindle bore: 155 mm turning dia. in gap: 1050 mm spindle turning speed - stepless: 10 - 1200 U/min metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: inch. Whitworth-thread: 0,0625 - 60 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 80 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm thread: 80 Stufen face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MT6 quill stroke: 250 mm total power requirement: 250 kW weight of the machine ca.: 6550 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1 ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 bis 4000 mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed - stepless: 20 - 2000 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 - 60 TPI bed width: 400 mm spindle cone: Gr. 8 number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 kW diameter of quill: 75 mm : MTS quill stroke: 230 mm total power requirement: 11 kW weight of the machine ca.: 2650 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: 1,5m, 2m, 3m and 4m. variable speed ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

turning diameter over bed: 630 mm turning diameter over slide rest: 430 mm turning length: 1000 bis 5000 mm spindle bore: 103 mm turning dia. in gap: 830 mm spindle turning speed - stepless: 20 - 2000 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 -60 TPI bed width: 500 mm spindle cone: Gr. 11 number of feeds: 64 mm/U longitudinal feeds:: 0,04 -12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 mm diameter of quill: 75 mm : MT5 quill stroke: MT5 mm total power requirement: 11 kW weight of the machine ca.: 3010 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m.  ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 1000 bis 5000 mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed - stepless: 10 - 1200 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 -60 TPI bed width: 400 mm spindle cone: Gr. 8 number of feeds: 80 mm/U longitudinal feeds:: 0,04 -12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 mm diameter of quill: 75 mm : MT5 quill stroke: 250 mm total power requirement: 11 kW weight of the machine ca.: 2710 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. v ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 bis 5000 mm spindle bore: 103 mm turning dia. in gap: 700 mm number of spindle speeds: 11,5 - 1400 metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm Whitworth-thread: 0,25 - 60 TPI bed width: 400 mm spindle cone: Gr. 11 number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 kW diameter of quill: 130 mm : MTS quill stroke: 250 mm total power requirement: 11 kW weight of the machine ca.: 2800 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: 1,5m, 2m, 3m and 4m. variable speed, 3 steps rapid traverse throu ...

Thickness of sanding paper: 1,1 mm Width of sanding paper: 34 mm Length of sanding paper: alle Längen mm Sharpening pitch: 3-4/4-6/5-8/ bis 10-14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickness of sanding paper: 1,6 mm Width of sanding paper: 54, 60 und 80 mm Length of sanding paper: alle Längen mm Sharpening pitch: 3-4/4-6/5-8/ bis 10-14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 14 mm Boring power: 15 mm : MK 2 bore depth: 70 mm throat: 180 mm : bis 275 mm : 529 mm table surface area: 250x220 mm column diameter: 65 mm Total height: 890 mm total power requirement: 0,6/1,0 kW : 420-2100 U/min. weight of the machine ca.: 63 kg Machine with CE mark! new machin Domestic equipments: - Stepless speed control - Table adjustment via rack - Digital speed display - Full motor protection - drill protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 3000 mm roll diameter: 50 mm work piece width: 300 mm Roll lenght: 210 mm Height: 800 bis 1100 mm No. - Rolls: 12 dimensions of the machine ca.: 3 x 0,33 x 0,55 m Unused feeding roller conveyor with two feet Photo 5-7, price 850,--/piece, 2 pieces available. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Lauenstein Wernigerode Type: T3 antique screw tempering machine YOM 1935 Output: bis zu 400 Kg/h / approx. 400 kg/hr different: Untampered original condition flat Belt drive Tempering unit complete with water jaketed and agitaded chocolate hopper Electrical cabinet is Original At the moment we rebuild this machine in original condition We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

working area: Materialstärke bis 24 mm working length: 300 - 600 mm drive motor: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

module: 1,0 mm tool taper: MK 3 turning speeds: von 169 bis 2500 U/min. : distance: Fräser-Werkstück: 10 - 50 mm weight: je Stück: 500 kg documentation: vorhanden number: 8 Stück : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wire dia.: 5 - 17 mm wire length: max. 5.000 mm straightening feed: stufenlos bis ca. 60 m/min : 11 kW, 380 V, 50 Hz : 45 kW, 1480 U/min, 380 V, 50 Hz total wight: ca. 15 t : Typ DZA/20 f. 1000kg Coil The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of controlled axis: 6 workpiece weight: Unbkt kg throat: bis 8000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1090 mm turning diameter over slide rest: 690 mm turning length: 3000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 160 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: 8000 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in:  ...

turning diameter over bed: 1320 mm turning diameter over slide rest: 940 mm turning length: 6000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1500 mm spindle turning speed range: 5 - 1000 U/min metric threading: 0,5 - 480 mm thread: 80 Stufen thread - module: 0,125 - 120 mm thread - inch: 60 - 1/!16 inch. Whitworth-thread: 0,0625 - 60 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 160 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm face slide travel: 685 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MT6 quill stroke: 250 mm total power requirement: 22 (30) kW weight of the machine ca.: ca. 11500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also availabl ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 6000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm spindle cone MT: 160 face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca. 9500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available i ...