bio gas used for sale

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 7.7 m -Connector: 4-pin -Transport dimensions: 400/400/H100 mm -Weight: 4.7 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 4 m -Connector: 5-pin -Transport dimensions: 360/340/H80 mm -Weight: 1.7 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chucks: Ø 6-18 mm -Square collet chucks: 6-15 mm -Outer diameter: Ø 30 mm -Cone: Ø 40 mm -Cone length: 17 mm -Weight: 6 kg

Powder curing furnace 2,000 x 1,900 x 2,000 mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m³/h 10 electric motors 1 pc 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 33 kW = 28,380 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is operated with gas burner 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...

Powder curing furnace 3,500 x 1,900 x 2,000 mm gas operation 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 58 kW = 49,880 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc. stove is heated by gas burner. 15 Exhaust air 1 pc device for exhaust air pipe, m ...

1. Combined Cycle 2. Manufacturer: Mitsubishi (Japan) 3. Commissioning year: 2007 4. Output: 248MW 5. Frequency: 50Hz 6. Pulverized Coal consumption: 1700 ton/day 7. Type: Gasification Furnace/Air Blowing Dry Feed System 8. Gas purification: Wet gas purification＋ Gypsum recovery 9. Gas Turbine １200℃ class 10. Total Running hours: approx. 32,000 hours 11. Design Thermal Efficiency: 12. Power Generation End４8(46)％ / Transmission End ４2(40.5)％ 13. (Thermal efficiency is based on high-level heat (HHV), 14. Low heat (LHV) standard in parentheses) • • -Gasification Furnace • -Pulverized coal Machine • -Heat Exchanger • -Gas purifier • -Booster • -Gas Turbine • -Steam Turbine • -Generator • -HRSG (Heat Recovery Steam Generator) -Transformer

Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

We currently offer: CHP CAT Gas V16 Type: G3516 SITA Power: 1278 KVA/ 1033 KW Year of construction 1998 Hz 50 Hours: 0 After the overhaul in 2014, the generator set no longer ran Accessories: control cabinet, radiator, exhaust, complete heat exchanger Complete CHP plant Documents are included You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 123 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 202 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 252 , Generator Hz: 60 , Generator Volts: 480 , Generator Amps: 315 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/used-caterpillar-g3406-generat or-202-kva-gas/22424, , = More information =, , Empty weight: 7.500 kg, Type number: CATERPILLAR G3406 GENERATOR 202

Van Rietschoten & Houwens 430-301E Exhaust Gas Averager

2x GE Frame 6B gas turbines # Technical Summary Equipment Details - Gas Turbines: Two GE MS 6001 B gas turbines paired with AEG generators (Type S7102/2). - Operation History: - Commissioning: 1981 - Gas-fired Operation: Until 2005, primarily for base load (~7000 hours/year). - Operational Hours in Combined Cycle: - GT21: ~167,000 hours, ~1130 starts - GT22: ~159,000 hours, ~1180 starts - Retrofitted: In 1996 with water injection for NOx reduction. - Conversion: In 2007 to peak load operation using heating oil (HEL) with new steel chimneys and upgraded control systems to ABB Procontrol 14. - Operational Hours in Peak Load: - GT21: ~130 hours, ~177 starts - GT22: ~150 hours, ~180 starts - Last Network Operation: 2015 - Last Oil Service: - GT21: October 2015 - GT22: September 2016 - Last Borescope Inspection: December 2016 - Defect: Heating oil transfer line issue in 2 ...

We are currently offering for sale an almost new 50 kW CHP plant from Tuxhorn. Specifications: - Model: E50SW (Natural Gas Version) - Year of Manufacture : 2022 - Commissioning Date: February 2023 - Operating Hours (BH): 45 - Number of Starts: 59 Special Features: - Equipped with a second exhaust gas SD, reducing exhaust noise to as low as 35 dB(A) for quieter operation. Condition: - Excellent: The unit is in like-new condition with minimal usage. Applications: - Ideal for industrial or commercial operations requiring reliable and efficient combined heat and power. Find more here - / Contact us at -

pressure: 105 t chamfer lenght: 3100 mm distance between columns: 2600 mm table width: 100 mm table height: 750 mm Control: DELEM DA 65 dayligth: 200 mm working feed: 0 - 10 mm/sec return speed: 0-100 mm/sec rapid traverse - up: max. 100 mm/sec voltage: 380 V / 50 Hz total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4 x 2,2 x 2,8 m Equipment: • CNC-control DELEM DA65 graphic video • manual back-off turning • upper and lower tool • 2 manual control / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

VA-10. Residual Gas Compression/Separation Stages (V 671A/B, B670) 3-stage complete system, Type SN, Built: 1990 Incl. necessary equipment, functional, part of the overall system Residual gas compression consisting of pulsation damper B674, separator B670, Tank B673, heat exchanger W672, filter B679, slop tank B675, Gas/liquid separator B661, pipelines Manufacturer: Andreas Hofer Hochdrucktechnik GmbH Technical Data: Steel sheet construction, BMG 5709/968; Find more here - / Contact us at -

TO WHOM IT MAY CONCERN; WE VE 2 PCS USED REPORTED EXHAUST GAS TURBOCHARGER ABB TPL65 - A30 AT STOCK PLS FIND DETAILS ON BELOW TYPE TPL 65-A30 HT 466933. &. 400485 N MAX 498. TMAX 680 nMAX 473. 650 C PLS FIND SERVICE REPORT ON FILES SECTIONS

1. Qty. 1 Second-hand slab gas fired pit type furnace Manufacturer: Tehnika Set Type: Gas heated (2 Zones) Built: 2001 Stopped: 2019 Power: 110kW Number of heating units: 8 Dim.: 2622 5084 x 6294 mm – H x W x L Inner dimension per zone: LxWxH – 380026001635 mm Load weight max. / 2 zones: 42.000 kg Max. Slab number per zone: 5 Slab length: 3000 mm Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. Temp.: 630 °C

weight max. in kg: 2500 kg stroke: 3050 mm fork length: 1200 mm load centre: 500 mm turning radius: 2444 mm driving speed: 22 km/h guage width: vorne 1008 mm guage width: hinten 932 mm weight of the machine ca.: 3,64 t dimensions of the machine ca.: 3,8 x 1,25 x 2,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kg stroke: 3830 mm fork length: 1200 mm weight of the machine ca.: 3,2 t dimensions of the machine ca.: H2425 mm Load center 500 mm Mast Simplex mast trailer hitch Rubber-mounted steering axle 4-fold super elastic tires The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gassner bolt feeder with pneumatic lifting station and blower. Filter system for air transport with 8m pipeline

Conveyor belt, trough conveyor belt, trough conveyor GASUS type DG 300-5/2,75Belt conveyor, conveyor belt, belt conveyorFabrig Nr: D-7321915 Year of construction 1996Effective length: 2.75 metersBelt width: 230/300 mmDeflection pulley diameter: 210 / 230 mm (rubberized drive roller)Deflection pulley width: 400 mmBelt speed: approx. 15 meters/min. Motor power: 0.75 kWNerg connection: 400 volts, 50 Hz - Drive via SEW geared motor- Inlet hopper 550 x 430 mm- Metal idler rollers with maintenance-free ball bearings- Strip tension via threaded spindles

Conveyor belt, trough conveyor belt, trough conveyor presumably GASUS type FB 400 x 5500Belt conveyor, conveyor belt, belt conveyor Fabrig Nr: F-02071168 Year of construction 1996Working length: 5.5 metersBelt width: 400 mmDeflection pulley diameter: 225 mmDeflection pulley width: 450 mmBelt speed: approx. 30 meters/min. Motor power: 1.5 kWNerg connection: 400 volts, 50 Hz - Drive via tubular motor- Inlet hopper 600 x 400 mm- The support stations are 2-part troughed- Metal support rollers with maintenance-free ball bearings-

Height=0.42 m, Overall length= 0.52 m, Overall width= 0.44 m, Net weight= 51 kg,

hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1

gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1996 equipped with Weishaupt combi burner GL3/1-E, ZMD, 90-630 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.

1 gebr. Rapid steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 600 Capacity : 600 kg/h Heat output : 400 kW Operating pressure max. : 13 bar Water content approx. : 43 l Year of construction : 1996 Heating coil year : 10 / 2023 equipped with Weishaupt gas burner, gas control system, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

General SKU001C002 LocationBarneveld MakeUltrafilter International AG Haan TypePG-EG 0768 No.148267-01 Year of construction2002 Specified Features - Candle filter Material finishPolished Pressure Working pressure16 Bar Main Features MaterialStainless steel Surface0.6 m2 Candle filters Candle filtercheck Cartridge filter, pharma execution Filter surface0,6 m² Number of candles4 Candle sizesDia. 60 x 750 mm Vessel sizesDia. 260x800 mm MaterialStainless steel 1.4571 (316Ti) Information Total height1,4 m Weight70 kg Floorspace0,7 x 0,5 m Extra Specifications- checkthis item is unused - 4 cartridges (not included) - capacity: 1080 m3/h at 1 bar - Max temp 200°C - Max 16 bar Candle filtersUltrafilterFilters > Candle filtersBrand > Ultrafilter What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippin ...

Execution Suitable for potatoes and carrots Capacity: 10 kg Automatic water jet supports the discharge of peeling waste Safety microswitches on door and lid Easy to use Quality Housing and containers made of stainless steel Transparent plastic lid (control of the work process) Connection Power: 750 watts This device requires a fixed water connection Metrics External dimensions: W x D x H: 400 mm x 770 mm x 860 mm Scope of delivery 1 grating plate Guidelines Of course, produced in accordance with the hygiene and safety guidelines Article bears CE marking in accordance with the directive Material complies with European food standards Dimensions Width 400 mm Depth 770 mm Height 860 mm Details Capacity 10 kg Hourly production 120 kg/h Timer function 0.00 min to 4.00 min Power supply Power 750 watts Voltage 230V Phase(s) 1N/PE Frequency 50 H ...

General SKU254S226 LocationBarneveld MakeHauck (USA) TypePBG 1000E-EE-VA-A air heater Main Features MaterialMild steel Specified Features - Miscellaneous MaterialMild steel Information Year of constructionUnknown Floor space4,3x2,2 M Total height2,1 M Weight2100 Kg Extra SpecificationsGas burner Hauck (USA), type: PBG 1000E-EE-VA-A, capacity 230 kW, type of gas: natural gas: With fan, brand: Karl Klein type: EMV 330/S (110 deg C), 110 m3/h: With 4x air blowers: 0.25 kW 230/400 Volt and with air heater: Leister LE 10000 HT 15kW + spare air blower. With board cabinet (as is). MiscellaneousHauck (USA)Miscellaneous > MiscellaneousBrand > Hauck (USA) What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

General SKU001C001 MakeUltrafilter International AG Haan TypePG-EG 0768 No.143458-01 Year of construction2001 LocationBarneveld Specified Features - Candle filter Material finishPolished Pressure Working pressure16 Bar Main Features MaterialStainless steel Surface0.6 m2 Candle filters Candle filtercheck Cartridge filter, pharma execution Filter surface0,6 m² Number of candles4 Candle sizesDia. 60 x 750 mm Vessel sizesDia. 260x800 mm MaterialStainless steel 1.4571 (316Ti) Information Floorspace0,7 x 0,5 m Total height1,4 m Weight70 kg Extra Specifications- checkthis item is unused - 4 cartridges (not included) - capacity: 1080 m3/h at 1 bar - Max temp 200°C - Max 16 bar Candle filtersUltrafilterFilters > Candle filtersBrand > Ultrafilter What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippin ...

A Gasti cup filling and sealing machine for preformed round cups, which has been used in the dairy industry, is available. Cup diameter: 95mm, output range: 2500-4500cups/h, filling volume range: 50ml-500ml, max. product temperature: 100°C, max. product pressure: 2bar. An on-site inspection is possible.

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Gassner closure loading system consisting of 3 basements (storage containers), with automatic cap loading for crown caps or aluminum roll caps on two cappers. The basements are filled using cardboard boxes., Additional title: crown caps, aluminum screw caps, Crown caps: 24000 pc/h, Aluminium screw cap: 24000 pc/h, Power: 1,7 kW, Voltage: 3 x 380 V, Length: 1,3 m, Width: 0,6 m, Height: 1,1 m, Weight: 70 kg, Material: stainless steel, Base construction: Rectangular storage container with lid, base made of square tube, Features: level indicator , Periphery: 3 magnetic transport-tapes (approx. 3 m / 14 m / 2 m)

Brevetti E. Gasparin & C snc horizontal wrapping machine, model: 50GOR2, serial number: 502 34, year of construction: 1996, 220 V, 3 Ph, 50 Hz, 5.5 A, 4 kW, weight: 735 kg, film width: 350 mm, chain infeed belt with dividers, distance between dividers: 190 mm, divider height: 30 mm, seal width: 220 mm, plastic outfeed belt, belt width: 240 mm, total dimensions: 3850 mm x 780 mm x 1780 mm.

General SKUR0365 MakeBuss SMS LocationBarneveld TypeRieselfilm Gaskuhler Pressure Working pressure shell4 Bar Working pressure tubes0.5 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface3.15 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4541 (321) Heat exchangercheck Verticalcheck Heating surface3,15 M2 Number of tubes:25 Tube diameter44.5mm Tube length1000mm Wall thickness tubes2mm Max. temperature200 degr. C Shell diameter400mm Shell length1000mm Information No.22.11.6351/3 Year of construction1994 Floorspace2,0x0,8 M Total height0,8 M Weight500 KgSpicesPlastic & polymersShell and tube heat exchangersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleo ...

Used KRONES glass bottling line - 18000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for spirits is a high-performance, used bottling line engineered around premium OEM equipment. With a nominal speed of 18,000 bottles per hour, it delivers reliable throughput for mid-to-high volume beverage production and industrial packaging. The line handles standard spirits formats with precision and is fully integrated from depalletizing to labeling and end-of-line packaging.Production speed: 18,000 bottles per hourBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainer types: Designed for Glass bottle handlingKey OEMs: Krones (core line), Zalkin (capping), plus Hartness, MSK, Garvens, Videojet, Langenpac, Marsh, Mapex, GassnerPrimary modules and models: Krones Sensometic filler, Krones Variojet rinser, Zalkin T9/360 cappers (x3), Krones Prontomod ...

grinding diameter:200 mm grinding length:320 mm total power requirement:3,5 kW weight of the machine ca.:9 t space required L x W X H:5,28 x 4,5 x 2,4 m max. wheel dia.:200 mm Spindle drives Arena Siemens For Worm grinding we have not module, but pitch. Pitch is freely programmable from 0.001 to big value i.e. 500mm

Gaspardo 6m seed drill with Howard-Nordsten seedbed combination, Technical specifications:, - Working width: 6m, - approx. 120ha used, - Sowing technology: Disc coulter with pressure rollers for precise sowing, - Carrier: Howard-Nordsten seedbed combination

Millipore IsoPak STS, System equipped to pack and unpack columns for Millipore K Prime Biochromatography system year of manufacturing 2000

Millipore K-Prime III Biochromatography system for cleaning and separation of proteines, biotechnology products, antibodies etc. The System is GMP-conform. floating rate 1-10 l/min, nominal pressure 7 bar, UV-H and LF Messuring after column, fraction sampler valves The System is consisting of corrosion-resistant materialials like lastic and Hastelloy-C.

Applikon cell cultures bio reactor system / fermentation system built in 2004 consisting of: 1 Applikon 130 liter bioreactor type PS 130 L in 316 L stainless steel electropolished -Product space 3 bar / vacuum -Jacket 6 bar / vacuum -Agitator Magnetgekoppelt, speed adjustable -Piping, heating, valves, filters, pumps, control cabinet, etc. -mounted on frame and wheels -cGMP standard 2. Applikon 30 liter bioreactor type PS 30 L in 316 L stainless steel electropolished -Product space 3 bar / vacuum -Jacket 6 bar / vacuum -Agitator Magnetgekoppelt, speed adjustable -Piping, heating, valves, filters, pumps, control cabinet, etc. -mounted on frame and wheels -cGMP standard 3. extensive documentation

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

description: Type: MAN 2876 LE302 gas engine for combined heat and power Power: 190kWe/1,500 rpm Standard scope of delivery â?¢ Rows â 6 cylinder four-stroke â gas engine based on MAN â D28 â?¢ Single cylinder heads, high-alloyed valve seat rings and valves, form-forged crankshaft with counterweights, wet cylinder sockets, piston cooling over oil spray nozzles â?¢ Compression ratio 11:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with multi-cyclone oil separator, engine ventilation must be integrated on the customer side â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2,412 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal & ...

Biological exhaust air purifier for odour removal, exhaust air treatment, bio-air purifiers, biofilters, air scrubbers used The exhaust air filter can be used for odour disposal in wastewater treatment, waste management, oil mills and malthouses, biogas plants, landfill degassing, carcass recycling plants and slaughterhouses. The exhaust air is first passed through an air scrubber / humidifier and then through the biofilter material. There, the unened odours are neutralized. Manufacturer S&H GmbH & Co. Umweltengineering KG Year of construction probably 2006 Dimensions: approx. 10.5 m x 10.5 m + 2.5 x 5 m Surface filter 9 x 9 m (internal dimension) Filter material: 149 m3 biomix and 24 m3 oak wood Bulk height 2.14 m The side walls are made of PE panels with support made of galvanized steel. The filter was installed in a biogas plant. We also have other components of the s ...

- 1 outlet nominal power kg/h 800 kg/h engine power 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 72 5 mm width 690 mm Height 1520 mm Weight 75 kg material 1.4301 / AISI 304 Height ejection in 475 mm Supplied incl. sieve 5mm ; New machine - best condition

Interflow MVK 183 II Micro Bioligical Safty Cabinet ; Second Hand

Rated power kg/h 1500 kg/h Engine power 11 (15) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 32 A Laenge 810 mm width 725 mm He he 1570 mm weight 133 kg Material 1.4301 / AISI 304 Sieve 5mm ; New machine - best condition

Sartorius Stedim biotech BioWelder 16370 The BioWelder works with a thermal welding cycle that does not require laminar flow. In this welding process, the blade is kept sterile and endotoxin-free throughout the process. The inserted hoses are cut with a knife and then fused together by the device. The cycle process is fully automated and is only released after a full cycle. Various programmable holders make it possible to weld thermoplastic hoses of the same type (e.g. C-Flex, Sanipure, Pharmed) with diameters from 6.4 mm (1/4") to 19.0 mm (3/4"). Characteristics: Fully automatic operation Welds thermoplastic tubes up to 3/4 inch outer diameter Pre-installed settings for C-Flex, Raumedic FluiSoftTM, AdvantaPure, AdvantaFlex, Pharmed and Sanipure hoses True Thermal Weld offers exceptional strength Aseptic connection without laminar flow hood Data output by a print ...