binns and berry used for sale

Ladies and gentlemen, we offer: Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own ex ...

Ladies and gentlemen, we offer: Machinery and equipment for the production of roof tiles, Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and load ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: 1 piece used vacuum oven, Make: BMI Type: B 64 R THY Dimensions: 600 x 900 H x 600 mm Max. temperature: 750C Power: 60 kW max. batch weight: 600 kg Working vacuum: 5x10-2 to 5x10-3 mbar Cooling pressure: 1.2 bar abs. the parts remain bare Price and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data ...

Capacity/h: 6000 P/h Condition: excellent, ready for operation Tetra Pak TBA 8 1000 ml Slim Line Filling Machine with Screw Cap Applicator TCAP 47 consists of: TBA 8 1000 ml Slim Line Filling Machine V100, Pull Tab Applicator PT 8, Tetra Cap Screw Cap Applicator TCAP 47. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

Capacity/h: 6000 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 8 Slim Line 1000 ml Filling Machine with ReCap 2 consists of: TBA 8 1000 ml Slim Line Filling Machine, Pull Tab Applicator PT 10, Tetra Cap Screw Cap Applicator ReCap 2 and Packer TCBP 70. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

Pouch Form Fill & Sealingmachine manufacturer: Nagema, Germany Typ: HS1 capacity: max. 50 bags/min, infinitely adjustable closing: sealing dosage: volumetric doser like rice, candies, spicery etc. bag width: 120 mm bag length: from 50 200 mm adjustable dimension: 2,0 x 1,1 x 2,1 m weight: 900 kg Techn. State: used, very good state

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks • In the filled state of: 1 + 1 • In the empty state of: 1 + 3 Supplement/piece (prices on request): Disc valve DN 65 Disc valve DN 50 Blind cap Reduction piece NW 65/40 or 65/ ...

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

Cat. No. 10-1070 New Complete continuous distillation and rectification plant (DRA) for the production of 10,000 Ltr/day - Fab.Eurolux Fine sprite or neutral alcohol made from starchy and sugary raw materials For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Vibration table / table We offer: used vibration table / table Condition: good, ready for use Manufacturer: unknown Year of constr.: 1995 estimated Dimensions: Width: 3500 mm Length: 8000 mm Height: 550 mm Steel quantity: approx. 8 mm Weight: estimated 3500 kg Vibration / vibration motors: 6 pieces Manufacturer: Bosch Type: Connection data: 250 V, 3 A; 1.0 KW; 200 Hz Speed: 5700 RPM The supply of vibration / vibration motors via a central frequency converter Bosch (for 2 toggle vibration tables and 6 vibration tables. This when purchasing multiple systems can be purchased: Technical data frequency: Produced for Bosch from the Flender sky / Tübingen Type: 2 GR132/135 (poorly readable) Motor: 11 KW, 380 V, 50 Hz; 22.5 A, 2880 rpm, cos.phi 0,89 Converter sec.: 11 / 12,5 KW; 250 V, 200 Hz, 2 26, 4 / 28; 9 A Control: Bosch Accessories: 2 or 4 forms for dominoes (see photos) More ...

New plastic handles for drawers, tool cabinets, etc. 380 pieces. Partially original packaged. Price reduced VS €/piece

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 40.000 liters used. The container is used and cleaned from the inside. Length: approx. 870 mm Diameter: approx. 2500 mm Weight: approx. 7000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . The tank system we offer freely loaded from the location Wars ...

Current: 9.5 A 2800 rpm

Cat. No. 09-1590-3 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws thread connection carbines DN 25 and with sloping seat discs valve DN 25 diameter: 1,000 mm contents: 1,000 mm height: 1,720 mm weight: 102 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

in execution with PowerShift Transmission. Tip height 330 mm Top width 1500 mm maximum swing over bed 690 mm Spindle bore 82 mm

Cat.-No. 09-1590-6L new Material: V2A (AISI 304) 1.4301 – Surface inside and outside IIIC upper bottom: Manhole with 6 Screws incl. thread connection DN 50 according to DIN 11851 lower bottom: With Conical Bottom 45°and rest outlet underneath with forklift and pallet truck content: 1500 l 1100 mm diameter 2250 mm total height Weight 130 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 immersion socket for temperature control Temperature control/digital temperature control/analog All prices are valid Ex-Works, excl.VAT Delivery: from D-97753 Karlstadt-Karlburg Freight Charges: depending on dimensions and destination Subject to prior sale

Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...

Input and Output Board PC 1 NEA 80 (Grundig 9.44904-1707 FD-Nr. 6006 04 100642) Exchangeprice 520,-€ with Exchange 620,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Cat-Nr. 10-2460 in a very good condition Material: V2A - AISI 304, 1.4301 Surface: inside: IIID, outside marbled Upper Body: with Manhole Lid DN 400 with 4 Screws with Clamp Closure, with Fermentation Lock DN 50, with 4 Eye Hooks Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height: 1570 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Input and Output Board PC 2 NEA 90 (Grundig 9.44904-1709 FD-Nr. 6006 04 100663) Exchange 480,-€ + Mwst without Exchange 580,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Cat. No. 12-2450 in a very good condition Manufacturer: Disho Koruma Motor number: 155343 Type: VP 180/3300 Width: 2064 mm Length: 3040 mm Height: 3470 mm Weight: 4200 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

volumetrischer filling arrangement, filling area: 200 – 2,000 gs achievement: approx. 20 tacts min Durchlaufverschweissanlage model: 500 roles the foil strength of 25 microns to 600 microns flow speed: 5, 5 m / min

Lifting and Turning Device for beverage paper roll consists of: Jumbo Reel Lifting and Turning Device for beverage carton paper rolls, your choice: manual (manufacturer BT), with battery electrical lifting (manufacturer Tetra Pak)or with battery electrical lifting and autom. hydr. turning (manufacturer BT)

Used line for smoothing, separation and drying of small-sized objects made of zinc alloy, brass, aluminum, carbon steel, stainless steel and steel. The line consists of: Temper mill vibration made by Ebra, model EVP-RA 315, new 2006: - Tank capacity of 400 L, - Working capacity of 265 L, - Depth 530 mm working channel, - Weight (without charge and cover) 680 kg, - Dimensions: A x H, fi 1320 x 1060 mm Separator made by Ebra, model TM-350 K, new 2006: - Payload 1000 kg / h, - Engine power of 0.37 kW, - The speed of rotation of the drum 21 rpm - Engine speed 142 rpm, - Transmission chain 5/8 " - Dimensions: width 1000 mm, depth 1200 mm, height 1600 mm Vibration dryer made by Ebra, model EVK-350, new 2006: - Drying tank capacity 300 L. - The capacity of the drying agent 100 L. - Width 380 mm working channel, - Weight (without charge and cover) 610 kg - Documentation avail ...

Machine details New Machines 4 Food Tumbler Mixer Model Uniball 225 Mixer Tumbler All stainless steel construction Capacity 225 litres, load capacity 60 kg to 100 Kg With inner blades to assist product roll Variable speed from 12 rpm to 24 rpm Motor gearbox drive 1.1 Kw Electric tipping discharge by motor gearbox Motor gearbox drive 0.12 kw Electric 400 volts 50 Hz Electrical controls mounted in IP 65 stainless steel control box Rigid construction to withstand movement Mounted on stainless steel wheels Discharge height to suit a standard 200 litre tote bin Overall length 1.6 metres Overall width 1.25 metres Overall height 2.0 metres Suitable for all type of products 12 months warranty

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 118 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

new and origin packed set of screw and barrel for Reifenhauser extruder, model RT5801-1-150-30, screw diameter 150 mm - 30 l/d

Working diameter: 40 - 250 mm Automatic work piece loading and removing for ball diameters: 40 - 105 mm Manual loading for diameters: 105 - 170 mm Direct ball attaching: 170 - 250 mm Rotation speed, stepless: 10 - 300 rpm Grinding spindle speed range: -160 - 3150 rpm -80 - 1580 rpm -38 - 775 rpm -20 - 385 rpm Weight: 6,5 tn Electrical connection: 17 kW Year of manufacturing: 1991

Schwingkipptisch 1 / tilting table We offer: 6 used vibration table / table We offer: a used Schwingkipptisch 1 / tilting table 1 3.50 x 8.00 Technical data: Manufacturer: unknown Type: 8 x 3.5 m Machine number: unknown Year of built: unknown Documentation: not available Schwingkipptisch 3000 x 8000 x 8 mm designed for a traffic load estimated p 500 kp / m² = m², with formwork upper part completely stored on vrwindungssteifen Kippramen. Under construction from solid shape Weldment for establishing free to carry firm, level floor. Fully fitted with built-in tilting hydraulic for tilt at approximately 80 °, with 2 cylinders, electrical pump unit with oil tank, control and limit switch device and piped inside the tilt table construction. Ingredients: Vibration / vibration motors: 6 pieces Manufacturer: VEB Baustoffmaschienen Ludwigslust Type: A 800/3 28/71 No. o.a. 43190 ...

CNC plasma and cutting machine SATO SATRONIK FB 2000 2,000 x 4,400 mm plasma system Kjellberg HiFocus 100, (up to 25 mm quality cut), cutting max. 40 mm, 12 mm laser cutting quality, plasma burner PerCut 170 (quick change system), THC / automatic capacitive. Hoehenregulation with Kemper suction firing table 1.5 ( 2m) x 4.0 m and suction and filter unit Price: VB The plant is located at the Bochum plant Alternative plasma cutting plant Kjellberg FineFocus 800: plasma cutting system for attachment/re-training of CNC plasma cutting systems FineFocus 800 Plus Materialstaerke: up to 80 mm, Hole cutting and quality cutting up to 45 - 50 mm, gas console type PGE 3-800 (Kjellberg) - Description of the plasma cutting source (see appendix) Year of construction: Dec. 2005 (commissioning 2006) Condition as new (new price of the plant 46,327.70 EUR) Price option with gas console, mac ...

1 piece Sideros suction system type ECO 6 HC, 9000m3/h for plasma and firing cutting systems for suction firing table from 2.5 m - 3.0 m width (at 500 mm module width) suction and filter system with integrated fan, automatic, dust-duty filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,500 m3/h and a static pressing of max. 2,500 Pa. Filter class M with a separation degree of > 99.9% (BIA use category U,S,G,C). Technical data: volume flow fan 9,000 m3/h Volume flow Filter: 4,000 m3/h Press: 2. 500 PA filter area 60 m2 filter type: PTFE membrane separation degree: > 99.9% cleaning: rotary duesen connection power: 5.5 kW, 10.7 A voltage: 3 x 400 V, 50 Hz compressed air connection: 6.0 bar sound level: < 68 dB (A) dimensions: height: 2,100 mm Depth: 1,413 mm Width: 1,413 mm Weight: 62 ...

For CNC plasma and cutting cutting systems 1 stueck Sideros suction system type ECO 4 HC, max. 5000m3/h for plasma and firing cutting systems for suction firing table from 1.5 m width (at 500 mm module width) APPLICATION dust and smoke extraction systems on plasma and firing cutting systems ( plasma up to 130 amps). Cutting of steel and stainless steel sheets. suction and filter system with integrated fan, automatic, dust-duty -cleaner filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,000 m3/h and a maximum of 2,500 Pa. filter class M at a separation degree of > 99.9% (BIA use category U,S,G,C). dimensions: Height: 2,100 mm depth: 1,413 mm Width: 1,413 mm Weight: 620 kg Air entry: NW 200 - 250 mm Price 6,990.00 EUR (price + VAT ex works, excluding pipelines, installation and commissioning);  ...

CNC firing and plasma cutting machine Zinser 2115 / CNC 500/E, 2 x 5 m Year construction year: 2000, condition very good, Technical data: Working width: 2,250/2,000 mm x working length: 5,000 mm (can be reprinted) track width: 2,750 mm, Total machine length: currently 7,000 mm (can be relocated), positioning speed: 12,000 mm/min. processing speed: 50 - 6,000 mm/min. 2 torch wagons with three-hose machine cutting torches and dues 3-160 mm ( 300 mm) , ( 1. Torch wagon with preparation plasma separators) CNC control: Zinser CNC 500 E with 50 markos (standard figures), Option: e.g. plasma cutting machine Hypertherm HT 40 with machine torch hose package for the sheet metal range up to 12 mm (or see other options plasma cutting equipment) With complete document with software and floppy disks New price of the machine ( 72,500 EUR + 7,640 EUR for MCC 4.5) Price: 19,950 EUR Options ...

Description: plasma cutting system possible welding processes: plasma cutting with standard gases plasma cutting with oxygen (fine cutting technique) -autogen-burning cutting cutting speed: per sheet metal base up to 8m/min cutting length (x-axis):4300mm cutting width (y-axis):2100mm cutting thickness for plasma cutting: -for stainless steel=max.130mm;for normal steel (liquid steel)=max.40mm -for light metals/ Alloys=max.150mm burner adjustment distance: 250mm Plasma power source: 1. Nertajet 320-640 (2x parallel) Insulation class H; Protection class IP 23; 30Hz 2. Nertajet 120H-Autonom Road dimensions: 6400x400x550mm cutting table Ground: 4500x2600x670mm Equipment: Smoke extraction via suction table Smoke disposal by filter system Cooling of Et Scheid IK-V 18 Plasma cutting torch Autogen cutting torch roadway (rail) length 6400mm cutting table length 4500mm To ...

CNC-controlled flatbed cutting machine Satronik DS 2500 double-sided. synchronized rack-and-pinion pinion drive in laeng axle game-free timing belt drive in transverse axis, drive system with 3 drive motors working width: 2500 mm Total width: 4000 mm feed: 0 -12000 mm/min 1 x Autogen 1 x Plasma (option) CNC 801 CNC web control CNC 801 - driving control unit/user interface SATO PLC - 80486 Simple and over-the-top menu for programming control panel with large-scale touch switches for all machine functions CPU 80486 DX4 32 Bite CPU/75MHz 10.4 LCD screen Essi format (ISO 6582) Floppy drive 3.5, 1.44 MB (default) 2 pcs. Interfaces V 24 (RS 232C) Flash memory for operating system and 512K for user programs 4 MB memory function list (excerpt) 54 Standard shapes Graphically underscored part programming Programmable cutting joint display of the plate sizesize plate r ...

Eria Pompe Pacco Type: One 80-2/AA.T34 No.: 5930 Transmission: Spaggiari Transmissioni Type: RM 100/1 No.: 101730/99 Macdonald: Ercole Marelli Power: 9.2 kW Condition very good Dimensions: LWH = 2200 x 400 x 570 mm

Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg

Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg

Mixing hopper with 2 paddle mixers Feed screw down Pump speed control Type: NM045SP02512B Com.: 35300131 MaschNr.: 289249 Year of construction: 1997 Condition very good Pump motor Flender in ex e II Performance: 3.6 kW, 1440 min-1 Transmission Lenze speed controlled 1 Paddle mixer: speed controlled N1-n2 = 28-143 min-1 Browse gear : KW 1.35 in Exx 2. Paddle mixer: 120 min-1, 1.35 kW in Exx Dimensions: LWH = 2800x500x700mm Weight: 600 kg Mixing and pumping of viscous products with solids

Manufacturer: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/2 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Drive North, speed control Motor North Power: 2kW in EEx e II Stator with traces of use Dimensions: LWH = 1400 x 200 x 600 mm Per Dukein outlet: Flange DN 80 Weight: approx. 80 kg

Specifications / Technical Data S-720/T CNC-Fraesmaschine und Graviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.-and engraving machine you acquire old-fashioned technology with the certain i-Tpuelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingesses up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This series of mechanical engineering is just as applicable in the industrial sec ...

Make: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/1 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Stöber gear, to regulate speed Type: R47-2092-200-4 Engine Siemens in EEx e II Power: 2 kW Damaged stator Dimensions: LWH = 1450 x 400 x 430 mm Weight: approx. 80 kg Productsas variable in-let Out: DN 80 flange

Ex Center screw pump stainless steel Manufacturer: CSF inox Stator: Diameter 120 mm Statorlänge: 240 mm Transmission: Motovario No.: 88232123 Type: MKM/4 / 50 40-210 min-1 Engine: ABB motors LKeistung: 4 kW 1000 kg / h Dimensions: LWH = 1800 x 400 x 500 mm Weight: 300 kg good condition

Ex Center screw pump stainless steel Manufacturer: CSF inox Statordurchmesser: 140 mm Statorlänge: 290 mm Transmission: Motovario (Italy) No.: 8816900 Type: TK 100 190-1000 min-1 Engine: Ercole Marelli (Italy) 380 V, 50 Hz, 7.5 kW Dimensions: LWH = 2300 x 460 x 600 mm Weight: approx. 400 kg Condition very good

Ex Center screw pump in stainless steel Manufacturer: CSF inox Transmission: Motovario (speed controlled) Type: TK 100 Engine: Leroy Somer 380 V, 50 Hz, power: 9kW n = 144 min-1 Stator diameter: 160 mm Stator length: 390 mm good condition Dimensions: LWH = 2600 x 450 x 600 mm Weight: approx. 500 kg

Ex Center screw pump stainless steel Manufacturer: CSF inox Transmission: Motovario Type: TK 100 N1-n2 = 190-1000 min-1 Motor: ASEA Power: 9 kW 380 V Stator diameter: 140 mm Stator length: 600 mm good condition Dimensions: LWH = 2500 x 460 x 660mm Weight: approx. 400 kg

Ex Center screw pump stainless steel Manufacturer: CSF inox Getirebe: Lenze Germany Type: 11.331.31.25.4 / 8829 N1-n2 = 107-556 min-1 No: 8/1206/519 Engine type: 180 M / 4 K2465 380 V, 50 Hz Power: 18.5 kW 1460 RPM Stator diameter: 170 mm Stator length: 790 mm Dimensions: LWH = 2900 x 460 x 1000 mm Weight: 600 kg

Formats 500, 750, 1000 ml. For pasteurized milk. Conversion to volume production type 190 V. Straightening tool for cassettes with 20 spare cassettes. 2 screwdriver Capper 20. Power 9000 pack/h. Only 13000 operating hours. Disassembled by Tetra itself.