binns and berry used for sale

AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Lake mixer / Mixer -Manufacturer: Sprematec -Condition: presentation machine / demonstration system -Size: 120 L

Siemens combined fluoroscopy and X-ray system Sireskop SX with the following device components: generator Polydoros SX 65/80 tube OPTITOP 150/40/80 HC 0.6/1.0 digital image processing Fluorospot TOP Image intensifier 40 cm PACS integration DLR 2nd Workplace 3D3 ceiling tripod 2nd tube OPTITOP 150/40/80 HC 0.6/1.0 vertical stand Vertix complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless oth ...

Siemens combined X-ray and fluoroscopy system Sireskop SX with the following device components: generator Polydoros SX 65 tube Opti 150/40/73 C 0.6/1.0 digital image processing Fluorospot H Image intensifier 33 cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the bu ...

Siemens X-ray and fluoroscopy system/ angiography Polystar TOP with the following device components: generator Polydoros SX 65/80 tube Megalix 125/40/82 CM 0.6/1.0 Digital image processing Fluorospot TOP Image intensifier Sirecon 40-4 HDR 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is  ...

Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...

Stepped end and flush cut tuber, 4 plies, 3 colour tail end printer, photo cell for preprinted paper, web guide units

Accessories for Hacker Schuko ZM900-K, Y.O.M. 2014 Almost new replacement sieve with 15mm hole diameter 19 unused spare knives 34 x 34mm 2 side cuttings 20 fastening screws Built probably 2014 Please refer to the PDF file with our terms and conditions and order form. The machine can be presented on site by appointment. We only offer machines that are ready for use in our warehouse, see "further offers from this supplier".

CP-Citopac FKS-10 CP suppository filling, cooling and sealing line for pre-formed plastic casings, comprising: SFD-10 CP filling machine for pre-formed plastic suppository casings, output up to 10,500 per hour, with 2 filling stations for 0.5 - 3.5ml dosing range. Includes mobile electrically heated and stirred 30 litre product supply vessel. KTE-10 CP continuous cooling tunnel for up to 10,500 per hour, approx. 25 meters cooling length (about 1,450 suppositories) including evaporator with fan. U-shape layout. BST-10 CP sealing machine, for sealing the openings, with cutting and trimming station, coding station, and cutting station for the required count of strips. Designed for suppository casings with a distance of 17.35mm between each casing and a reel height of 45-51mm The line has been fully overhauled mechanically and electronically in 2019 and is as new.

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...

REF-1902 TEC-MAQ VACUUM MEAT KNEADER-MIXER Meat kneader with vacuum system and T-shaped mixing paddles. Manufacturer: TEC-MAQ. Model: ALFA-150. Serial no. 1125/OC. Year: 1996. 380V. 5,7A. 2.25kW. Capacity: 150 litres. Meat capacity: 80-100kg. Equipped with mechanical variable speed drive. Inner dimensions: length 600mm, width 480mm, height 600mm. Outer dimensions: height 1,600mm, width 700mm, length 1,250mm.

Handtmann vacuum filler with hanger line PLHV 241 Hanging line can also be sold individually.

Panaroma Model: AT400 Pasta stacking and cutting machine Serial: 1229 2002, Stainless stacking and cutting machine, 400mm width, designed to roll, to dust, to cut and to overcome the pasta sheet layers, suitable for lasagne or tagliatelle. Output up to 100Kg / hour, variable speed, with timer, 3ph, mobile

20,000 liters tank with thermal insulation not used tanks

Various office containers and storage containers and many more Different sizes! We rent and sell storage containers, sea containers, construction containers, overseas containers, double office container systems. Offer with transport possible - ask us. Example pictures - visit possible by arrangement. Please also take note of our other offers.

Transit Ultrasonic Banderolier ATS US 2000 AB TR; good condition; maintained and checked by ATS Customer Service in Heidelberg; Frame 360x260mm; Bandwidth 15mm. Transit ultra sonic banding machine ATS US 2000 AB TR; good condition; cleaned and checked by the support of ATS Heidelberg; frame 360x260mm; band width 15mm.

Digital display Heidenhain Thread cutting device Automatic pinole feed Electr. adjustable head (height) Coolant pump Table size 600 x 250 mm Recording MK 3 Speed Continuous

For sale a refurbished vacuum tumler. New control cabinet !

- Speedometer Digital - Depth indicator Digital Maximum drilling capacity 30/35 mm Max threaded drilling capacity M12/M20 Spindle stroke 130 mm Spindle cone Morse 4 Max distance between spindle and table 790 mm Distance between spindle axis and column 308 mm Spindle stick Vertical stroke of the spindle stick 130 mm Spindle speed 1-160-1000 rpm. 2-320-2000 rpm. Dimensions of the plate 350 x 440 mm Dimensions of the upper plate 570 mm Engine power 2.7/1.7 kW Weight 305 kg Dimensions 400x900x1900 mm

Product number: 1574B Type: TSMIV3250L Serial number: 56453 & 56455 Year of construction: 1993 Mixer: 4500 litres double paddle mixer Capacity: max 3250 kg product Power: 3 x 380V, 50Hz, 37kW Dimensions: 3400 x 2200 x 2700 mm With Scanio lifter for 200L bins Single discharge valve

Werner & Pfleiderer Multimatic Head Machine 4-row used immediately available in the warehouse. Type: Multimatic 4-row Stand machine the machine is in the baker's condition Built in 1993 380 Volt

NNP Rotary biscuit moulder, stainless hopper, variable speed rollers, belt width 1000mm, roller width 1000mm, digestive biscuit print, mobile, 3Ph

Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis

Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003

Travel X-axis 9,500 mm Y-axis 4,100 mm Z-axis 950 mm W-axis 900 mm Main spindle speeds (infinitely adjustable): 3.15 - 1000 rpm Spindle motor power 58 kW Feed speed (infinitely adjustable): X-axis 0.1 - 9600 mm/min Y-axis 0.1 - 5600 mm/min Z-axis 0.1 - 5600 mm/min W-axis 0.1 - 5600 mm/min Accessories: Plate field: 6 x 4 m (CNC-controlled B- and V-axis) Table: 2 x 2 m (CNC-controlled B- and V-axis)

Technical details Cutting width= .40 - .000mm Machine weight approx.: 640 kg Room requirements LxWxH approx.: 1800 x 1350 x 1920mm The machine was little needed, very good condition Extract from the manufacturer Infosheet: Technical data > For single to medium series productionâ Maximum cutting depth: 40mm The machine is in a very well maintained and very good condition and can be visited at any time under electricity by appointment. Subject to changes and errors in the technical details and information provided. Round cuts from 40 to 1000mm - size II Round cuts from 40 to 1500mm - size III The machines P 2000 II and P 2000 III are stand machines in a stable steel construction. They cut cleanly, dimensionally, with a straight cutting edge all cutting-edgeable materials: such as rubber, felt, cardboard, plastics, fibres, graphite with and without inserts, et ...

Bread cutting machine Wabäma Type Economy Plus 380.220 Electronics Cutting width adjustable with sickle knife 400 volts Weight 210 kg with digital control Built in 2005

Bread slicer Wabäma Type Piccolo 380.10 HA MB Cutting width 10mm semi-automatic 230 Volt 0.75 kW

Ultrasonic banderolier ATS US 2000 AB; good condition; maintained and verified by ATS Customer Service; Bandwidth 30mm; Frame 360x260mm; extendable large roll magazine; Automatic or foot operation. Ultra sonic banding machine ATS US 2000 AB; good condition; cleaned and checked by the support of ATS; band width 30mm; Frame 360x260mm; big size magazine; automatic or foot switch.

Automatic Cutting width 9mm 192 kg 1.1 kW 400 Volt - 50 Hz

Cutting width adjustable from 4-14 mm analog control Sickle knife machine Stainless steel cladding on rolls with traces of usage Voltage 400V / 50Hz

Very good machine with spare parts worth 3000,00â?¬.

Marel IPM3 X600 Portioner for fish and meat Released: 2003 Condition: Restored Designed for slicing meat, fish fillets and whole fish into portions of similar weight. Two working conveyor belts allow you to speed up the slicing process and increase the productivity of 8 to 10 workers. Equipped with a dispersal conveyor belt, a sorting device on 2 x 2 baskets. Dimensions: 3400 x 1620 x 1700 mm. Pipeline width: 280 mm. Pipeline speed: 0.5 meters per second The number of resins per minute is 5 to 8. Power: 7.1 kW Connectivity: 3 x 380 - 480 B Send a request

Pieces of dough: 10-300 gr. Power: 10-60 pieces/ min digital control Stainless steel cladding rollable on rolls

1 MONTI compacting and finishing calender type 900-E for tubular knitted fabric in ALL FIBERS (naturals, synthetic, elastic and mixed). ). It can also heatset the 100% synthetic fabric (polyester, etc.) year 2001, very very little use (only about 2 year work time) with 2 compacting cylinder diameter 350 mm, cylinders are chrome plated and with a mirror effect finishing, felts width 1750 mm, working width 1450 mm, exit with precision plaiter or roller winder

Ultrasonic measuring and testing unit suitable for pipes up to 200 mm in diameter Manufacturer: ConPro Type: DMCON 200 Built: 2008

Crusher and shredder for broken asphalt; Motor 75 kW with hydraulic feeder in the hopper. Milling shaft. Power 75 t/h For granulating asphalt break-up. Up to 1200 x 400 mm. Granules depending on the built-in screen size.

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

Semi-automatic tube filling and sealing machine for PE, laminate and metal tubes, demonstration machine Capicity 10-20 tubes / min. Filling range from 5-250ml Tube sizes from D.13.5 - D.50mm with different format sets Ultrasonic sealing unit

CNC lathe fabr. SCHERER-FEINBAU type SNC 80Machine -No: 8079 Year 1995Distance between centers: 350 mmCircumference diameter over bed: 320 mmCircumference diameter over support: 160 mmPath Z + X: 250 mmSpindle mount: DIN 55021 / A 3Speed range up to: 6000 rpm.Feed infinitely variable: 0.1 - 10000 mm / min.Rapid traverse: 10 m / min.Quill stroke: 125 mmDrive power: 7.0 kWWeight approx: 2.0 tOutside dimensions approx: 2100 x 1500 x 1900 mmWith- Siemens control 810 T- power chuck- Linear turret with 4 tool holders- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cycle controlled lathe make METOSA type UD 260 CH x 1500Machine -No: 42194 built in 2001Center height: 260 mmTip width: 1500 mmCircumferential diameter: 475 mmCircumference diameter over bed: 530 mmCircumferential diameter over cross slide: 315 mmBed width: 350 mmSpindle bore: 80 mmSpindle mount: DIN 55027/8Discharge range: 0 - 2500 rpm.Feed range: 0 - 7000 rpm.Rapid traverse area: 10 m / min.Drive power: 15 kWWeight approx: 3.1 tOutside dimensions approx: 4120 x 1600 x 1800 mmWith- Three-jaw lathe chuck- Quick change tool holder with several inserts- CNC control FAGOR 8055/55 / TCLocation Staufenberg, little usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machi ...

Cycle controlled lathe make WEMAS type HITURN 320Machine -No: 24 built in 1999Turning diameter over bed 320 mmTurning diameter over cross support 150 mmTip width 800 mmSpindle bore 50 mmCone in the spindle - metric 60Motor power at 1500 rpm 7.0 kWSpindle speed rangeControl system Heidenhain 1st row 0 - 1000 rpm. 2nd Row 20 - 4000 rpm.X-axis diameter of the lead screw 20 mmLeadscrew pitch 5 mmMax. Stroke 190 mmRapid feed 7500 mm / minMax. Feed force 3000 NAccuracy of repeated position adjustment 0.008 mmY-axis diameter of lead screw 25 mmLeadscrew pitch 5 mmMax. Stroke of the support carriage : 750 mmRapid feed : 8000 mm / minMax. Feed force 5000 NAccuracy of repeated position adjustment 0.008 mmTool head Multifix Bmax diameter of the steel 25 x 25 mmtailstockPinhole diameter 65 mmQuill stroke 125 mmCone of the quill Morse 4Dimensions 2160 x 1594 x 1875 mmWeight approx 2150 kgWith- HEIDEN ...

CNC lathe make MONFORTS type DNC 5Year 1995 with C-axis and driven tool stationsCircumference diameter: 560 mmNumber of revolvers: 2Travel distance Z1 / Z 600/600 mmTravel X1 / X 260/260 mmMax. Spindle distance: 1460 mmSpindle passage: 85 mmSpindle flange: A8 / A8feed drivesRapid traverse Z1 / Z 15/15 m / minRapid traverse X1 / X 12/12 m / minFeed force Z1 / Z 11900/11900 NFeed force X1 / X 6600/6600 NNumber of revolvers: 2Number of tools per turret: 12Straight shank: 40 mmTurning tool shank: 25 x 25 mmSpeed range: 5 - 4000 rpm.Drive power: 18/24 kWWith:- CNC control SIEMENS 840 C- C axis- 2 tool turrets with driven tool stations- without driven tools- 2 opposite spindles- 1 set of tool holders- Chip conveyorSingle-layered run!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors except ...

CNC Lathe Fabr. VDF BÖHRINGER Type 180 CmYear of construction 1996Turning length: 500 mmMax. Circulation diameter: 330 mmMax. Turning diameter: 250 mmSpindle bore: 78 mmSpeed range: 50 - 4500 rpm.Spindle mount: DIN 55026/6Max. Torque: 800 NmFeed rate: - 10000 mm / minRapid traverse speed: 15 m / minDrilling force: 10 kNDrive power: 53 kWWith- CNC control SINUMERIK 840 C- Drum revolver with 12 tool holders- 6 positions with driven tool positions- 4 powered tools- many tool holders 40 mm- Bar feeder SIEMCA MO 4.6 / 4musedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC lathes make SPINNER type TC 65 CMachine -No: 050023 built in 1996Technical specifications:Distance between centers :600 mmSwing diameter over bed: 400mmMax. turning diameter: 310 mmAdjustment path X-axis: 200 mmAdjustment path Z-axis: 500 mmAdjustment path Q-axis: 500 mmC-axis adjustment range:360°max. rapid traverse: 20 m/min.Feed: 0 - 15 m/min.Main spindle passage: 65 mmMax. spindle speed: 4000 rpm.Counter spindle passage: 26 mmMax. spindle speed: 6000 rpm.Quill diameter: 80 mmQuill stroke: 100 mmNumber of turret stations: 16-foldMain spindle motor: 14 kWTotal connection value: 20 kWWeight approx.: 4500 kgDimensions approx.: 1700 x 2200 x 1700 mmwith- Control Siemens 820 T- 16-fold revolver- counter spindle- C axis- 8 powered tools- Parts catcherused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment. ...

CNC lathes make SPINNER type TC 108 MCMachine -No: 040199/98215 built in 1998Technical specifications:Distance between centers: 1000 mmSwing diameter over bed: 520 mmMax. turning diameter: 358 mmAdjustment path X-axis: 296 mmAdjustment path Z-axis: 1090 mmMax. rapid traverse X-axis: 18 m/min.Max. Z-axis rapid traverse: 24 m/min.Bar Capacity: 107mmSpindle speed: 2500 rpm.Quill diameter: 110 mmQuill stroke: 100 mmNumber of driven stations:12Connected load: 50 kVAWeight approx.: 6500 kgDimensions approx.: 3590 x 1750 x 1890 mmwith- Control Siemens 810Dused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bosch No. 0811 404 019 with 837001206 and 1 835 100 034 Valve Used

M 1105-02800 Machine type Cylindrical Grinding Machine - Universal Make ZIERSCH & BALTRUSCH Type URS 751 Built in 1982 Control type conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base from stock Technical details Grinding diameter 270 mm Grinding length 1000 mm Tip height 135 mm Total power requirement 7.5 kW Machine weight approx. 2.8 t Room requirement approx. 3 X 2.7 X 2.5 m Information ZIERSCH & BALTRUSCH Hydraulic Universal ROUND SCHLEIFMASCHINR Type URS 751 1982 built _________________________________________________ Tip height 135 mm Tip width/grinding length 1000 mm Tip width approx. 1100 mm Grinding wheel size: Through. x Width 400 x 50 mm Grinding spindle speeds (belts) 1,800 2,200 rpm Delivery path/rapid path 0.001 / 30 mm Grinding wheels delivery 0.0 ...