bin tipper used for sale

Lifting tipper Kemper HK 200 RD Manufacturer : Kemper Type : HK 200 RD Year of construction : 2011 Tipping height approx. 250cm Dimensions approx. W: 195cm D: 150cm H: 360cm for WP DK 250 Baker's condition Details see picture

Lifting tipper tipping height 260cm stainless steel without control box External dimensions W: 150cm D: 130cm H: 460cm Tipping height : 260cm

Palamatic M7 Palpharmamove drum lifter tipper Stainless, Manual drum lifter and tipper, mobile, 250Kg safe working load

Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Body: made of stainless steel -Manufacturer BAADER Type 531 -Tilt height: 2500 mm (can be changed for an extra charge) -Max. tine width: 740 mm -Chain hoist: Demag, year of manufacture 2007 -Dimensions: 3800/890/H1060 mm -Weight: 326 kg -without documentation

Forklift tipping containers, tipping containers, tipping skips, forklift skips, lift trucks -Tipping container: made of stainless steel -Manufacturer Bauer type: GU 300 9 -Content: approx. 0.3 m³ -with: holder for forklift tines -Max. Tine width: 205 x 70 mm -with: hydraulic tilting mechanism via the forklift battery 24 volts -Dimensions: 1880/680/H675 mm -Own weight: 208 kg

Swing loader, rotating and tipping frame, lifting tipper, forklift tipping container, tipping container, tipping skip, tipping device for loading trolleys, loading trolleys -Handover: in its current condition as inspected -Status: cannot be tested because no software has been programmed. -Tipping device: made of stainless steel -Ejection height: approx. 1600 mm -Use: for bakery products or the food industry -Individual components/dimensions: see photos, roller spacing 1640 mm -Dimensions: 2500/2000/H1720 mm -Weight: 1740 kg

Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Manufacturer: holac, tilting device made of stainless steel -Use: for food or food industry with height-adjustable tilting function -Set tilting height: 2000 mm (can be changed to max. approx. 2500 mm for an additional charge) -Total height: 2960 mm -Individual components/dimensions: see photos -Transport dimensions: 2960/600/H1630 mm -Weight: 470 kg

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

Boiler lifter Kemper HK 200 for spiral mixer boiler from Kemper SP150AL - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200

Lifting tipper, BOKU, HE 80/2, 800 kg

Hubkneader, Fabr. Diosna Type D240 2 G

Hebekipper, Fabr. Kemper, Type HK 200 RL

Dough conveyor pen, Fabr. Shepherd

Dough conveyor pen, Diosna, type TFK 280

Tilting device, Fabr. W & P, Type Elevo

Hebekipper, Fabr. Nijsten BV

Lifting tipper Diosna HKV 224 Year of Make: 2006 Condition: repaired Suitable for Diosna vat trolley (spiral mixer) Tipping height approx. 185 cm Pliers lock Automatic boiler emptying  Pneumatic Dough Scraper

-Boiler lifter Kemper HK200 RD -for Werner & Pfleiderer DK250 kneading kettle -with boiler drive and boiler scraper

approx. 600kg load capacity with dough slide shield, lower edge 210cm Total height approx. 180cm Mobile with parking brakes Mounting for DIOSNA tank car

20 to 80 mm diameter Auction-ID: A1-48931-16

Fetra rolling tipper for the collection and transport of metal shavings, industrial waste or bulk materials. Equipped with a manual tilting system with locking and a chassis on wheels for easy movement. Robust steel construction suitable for workshops, warehouses, production and recycling areas. Content included according to photos. Auction-ID: A1-48554-427

Fetra rolling tipper for the collection and transport of metal shavings, industrial waste or bulk materials. Equipped with a manual tilting system with locking and a chassis on wheels for easy movement. Robust steel construction suitable for workshops, warehouses, production and recycling areas. Content included according to photos. Auction-ID: A1-48554-428

Fetra rolling tipper for the collection and transport of metal shavings, industrial waste or bulk materials. Equipped with a manual tilting system with locking and a chassis on wheels for easy movement. Robust steel construction suitable for workshops, warehouses, production and recycling areas. Content included according to photos. Auction-ID: A1-48554-429

Fetra rolling tipper for the collection and transport of metal shavings, industrial waste or bulk materials. Equipped with a manual tilting system with locking and a chassis on wheels for easy movement. Robust steel construction suitable for workshops, warehouses, production and recycling areas. Content included according to photos. Auction-ID: A1-48554-424

Fetra rolling tipper for the collection and transport of metal shavings, industrial waste or bulk materials. Equipped with a manual tilting system with locking and a chassis on wheels for easy movement. Robust steel construction suitable for workshops, warehouses, production and recycling areas. Content included according to photos. Auction-ID: A1-48554-425

Fetra rolling tipper for the collection and transport of metal shavings, industrial waste or bulk materials. Equipped with a manual tilting system with locking and a chassis on wheels for easy movement. Robust steel construction suitable for workshops, warehouses, production and recycling areas. Content included according to photos. Auction-ID: A1-48554-426

Featured; 2 steering axles, lift axle, 2 supports (photos and videos in the snow were taken 8 months ago) Auction-ID: A1-47387-89

Equipped with tracked undercarriage; electric start; high tilt function; Auction-ID: A1-47387-274

- Ready to drive; - High tipper; - CE declaration available; - Viewing recommended; - Condition see photos; Auction-ID: A1-49749-9

Equipped with: New Garmech tipping trailer, capacity of 2.5t, adjustable tow bar, jockey wheel, side panels with closed profile tubes, bulkheads can be disassembled, tailgate with top and bottom hinge. Auction-ID: A1-47387-194

Fully demountable to flat wagon, grain scraper, double rear door, hydraulic support leg Auction-ID: A3-46151-520

Lift-tilt device, lifting tipper Make Itec, type 2700, built in 2017 for 200 and 300 litre standard loading trolleys Max. lifting capacity: 350 kg Dumping height: 2,231mm incl. 1 standard loading trolley 3x460V 50 Hz 0.75 kW - very good condition, hardly used - Was used to feed a piston filling machine - Documentation/operating instructions available Viewing possible in Korntal-Münchingen

3-sided tipper Spare tire available Tipping cylinders serviced last year Alluminium headrail State in which it is located Auction-ID: A3-46146-19409

- Ready to drive; - High tipper; - Viewing recommended; - Condition see photos; Auction-ID: A1-49749-50

Electro-hydraulic tipping device Own battery for the tipping system Steel loading floor Fold-down plates Towbar coupling, overrun brake, handbrake and support wheel Lighting Baking size 335x180 Auction-ID: A1-47414-81

General Description Three-way tipping agricultural trailer manufactured by Lochmann , model RM 100 T . Tandem-axle trailer designed for agricultural and general bulk material transport, with hydraulic tipping capability to the left, right and rear. Technical Details Manufacturer: Lochmann Model: RM 100 T Machine type: Three-way tipping trailer Year: 2008 Serial number: 21044 Maximum permissible weight: 10,000 kg Axle configuration: Tandem axle Permissible axle load: 4,500 + 4,500 kg Permissible drawbar load: 1,080 kg Three-way tipping: Left, right and rear Slovenian registration documents included Front axle tyres: New Rear axle tyres: Approx. 80% remaining Condition Good used agricultural condition. The trailer is reported to be ready for work. New tyres are fitted on the front axle, while the rear tyres have approximately 80% remaining tread. Auction-ID: A7-49535 ...

KRPAN Dump Dump Truck PT160/100 • Manufacturer: KRPAN • Model: PT160/100 • Hydraulic tipping body • Payload: 2,000 kg • Width: 160 cm • Depth: 100 cm • Height: 40 cm • Weight: 295 kg Condition: •New machine Auction-ID: A1-49580-2227

Robuste-Kaiser S3302B 2-axle steel tipper trailer – Gigant axles – 2008 Specifications: Brand: Robuste-Kaiser Type: S3302B Year of construction: 2008 First admission: 16-05-2008 Chassis number: VHRS3302B82C01555 Version: 2-axle steel tipper trailer Maximum permissible total weight: 33,000 kg Tare weight: approx. 6.740 kg Theoretical payload: approx. 26,260 kg Maximum bearing pressure: 13,000 kg Axles: 2x Gigant Maximum axle load: 2x 10,500 kg Suspension: leaf spring suspension Brakes: drum brakes Tyre size: 445/65 R22.5 Tyre profile on the first axle: approx. 40% Tyre profile second axle: approx. 70% Features: Steel body Hydraulic reverse tipping function Double steel rear doors 2 integrated grain chutes/unloading hatches, one left and one right Air, electrical and hydraulic connections Total dimensions (lxwxh)835 x 255 x 290 cm Internal dimensions ( ...

Benalu C33 2-axle aluminium tipper trailer – 21 m³ – manual cover net – 2007 Specifications: Brand: Benalu Type: C33 Year of construction: 2007 Date of registration: 20-11-2007 VIN: VH1C33CSB70100236 Overall dimensions: approx. 790 x 250 x 295 cm Inner dimensions of the loading platform: approx. 700 x 230 x 115 cm Specified capacity: approx. 21 m³ / 21,000 litres Tare weight: approx. 4,800 kg Payload: approx. 28,200 kg Maximum permissible weight: 33,000 kg Number of axles: 2 Maximum technical axle load: 10,500 kg per axle Leaf spring suspension Drum brakes Tyres: 445/65 R22.5, approx. 60% all-round tread Features: Aluminum Cargo Box Hydraulic reverse tipping function EBS braking system Manual longitudinal cover net with cable routing and crank control on the left front Mechanical support legs Particularities: Tear present in the cover net, see p ...

Benalu C33CSB01 2-axle aluminium tipper trailer – 20 m³ – Cramaro cover system – 2011 Specifications: Brand: Benalu Type: C33CSB01 Year of construction: 2011 First registration: 24-10-2011 Chassis number: VH1C33CSB0100477 Tare weight: approx. 4.760 kg Payload: approx. 28,240 kg Maximum permissible total weight: 33,000 kg Cargo box: approx. 20 m³ / 20,000 litres Interior dimensions of the loading area: approx. 690 x 230 x 120 cm (L x W x H) Overall dimensions: approx. 820 x 250 x 340 cm Number of axles: 2 Maximum technical axle load: 10,500 kg per axle Suspension: leaf spring suspension Brakes: drum brakes Tyre size: 445/65 R22.5 Tyre tread: approx. 60% all around Features: Aluminum tipping body Hydraulic reverse tipping function Cramaro cover system with roll-up cover EBS braking system Wide single-mount tires Wireless remote control with two push  ...

Includes 2 norm bins Auction-ID: A1-49547-109

Suitable for boxes / pallets 1000x1200 mm, max height box 950 mm, tilt height 1380 mm Auction-ID: A1-49547-110

milling station Dust and schnitzel suction PVA (cold glue) back glue PVA (cold glue) side glue Gaze station Stack envelope feeder Envelope groove 2 to 6 times Still in operation: No Available: immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Available: immediately