big press used for sale

with approx. 3m hose. Auction-ID: A1-46805-30274

Safety distance: 100 mm Run-time travel: 60 msec Table dimensions: approx. 210 x 160 mm incl. installed punching tool Auction-ID: A7-46287-213

Machine number: H74/247 Press force: 4 Mp Oil pressure: max. 200 atm Motor power: 1.1 kW Table dimensions: approx. 250 x 250 mm Auction-ID: A7-46287-208

Machine number: 2561290 max. load: 250 kN Throat: 190 mm Plunger strokes: 80 1/min Plunger adjustable: 45 mm Stroke adjustable: 8 - 80 mm Motor power: 2.2 kW Voltage: 380 V Table dimensions: 555 x 430 mm Auction-ID: A7-46287-22

Machine number: 35-173-98 Serial number: 2-0499 Compressive force: 4.5 kN Stroke: 60 mm incl. transport trolley Auction-ID: A7-46287-6

max. load: 25 kN Projection: 90 mm Plunger strokes: 220 1/min Plunger adjustable: 30 mm Stroke adjustable: 2 - 40 mm Table dimensions: approx. 220 x 150 mm incl. The installed punching tool Auction-ID: A7-46287-210

Consisting of two punching stations, driven by pneumatic cylinders incl. Installed punching tool on pedestal Dimensions of the pedestal: 560 x 300 x 170 mm Auction-ID: A7-46287-206

Machine number: 2-0586 Compressive force: 28 kN Stroke: 60 Table dimensions: approx. 200 x 150 mm incl. installed punching tool Auction-ID: A7-46287-204

Serial number: 055-007/12 Operating voltage: 220 V Frequency: 50 Hz Nominal current: 45 A Connection: 12.5 kW Control voltage: 60 W Press force: 25 Mp Operating pressure: 160 kp/cm³ Speed: 200 mm/s Sales: 450 mm/s Plunger stroke: 500 mm Projection: 360 mm Maximum distance between ram and table: 800 mm Table dimensions: 640 x 500 mm Auction-ID: A7-46287-167

Serial number: 101 Pressure: 6/7 bar on base Reference: Groven - Lot 16 Auction-ID: A7-46763-314

CNC-controller Delem DA-65R, bending pressure 1100kN, working lenght 3100mm, capacity - 7,5kW, voltage - 3PH 380 Volt, hydraulic oil - 120l Auction-ID: A7-46486-1

Offer 26134 Technical data: - Pressure capacity 160 t - Working width 3080 mm - Passage between the uprights 2550 mm - Projection 250 mm - Installation height 400 mm - Feed speed 100 mm/sec. - Working speed 7 mm/sec. - Retraction speed 70 mm/sec. - Ram stroke 160 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2850 x D 1800 mm - Weight approx. 7800 kg - with: - Swivel arm – control panel with control CYBELEC DNC 60 - Mot. Back gauge up to 625 mm - Crowning device - Lasersafe - 4-fold universal die split, split V-matrices, - Split sharpening tool, etc. - Two-hand control panel, foot switch, - Separate tool cabinet mobile

Working pressure 150bar – 15Mpa. Work extremely powerful and absolutely environmentally friendly! Maximum temperature 90°C - 284°F Maximum pressure 150bar – 15Mpa Capacity 900 l/h – 15 l/min burner power 3600W motor power 3.0 kW power supply 230V/50Hz detergent tank diesel Auction-ID: A1-40256-46

Used Homogeniser High Pressure Tetra Pak 10000 lhr Main technical features of the Tetra Pak Homogeniser Alex TA25 Tetra Pak manufactured the TA25/200BAR model in 1995 as a used high-pressure homogeniser, designed to process up to 10,000 liters per hour at a pressure of 200 bar. Currently, the machine operates at a capacity of 10,000 liters per hour, while maintaining a maximum pressure of 200 bar. In addition, the machine includes two homogenization stages, which are perfect for precise particle size reduction. Components and operation The Tetra Pak TA25/200BAR uses mushroom valve cylinders, which therefore ensure efficient control of liquid flow. The pistons have a diameter of 50 mm, which consequently allows the machine to evenly distribute pressure across the two stages. Moreover, a 37 kW motor powers the unit, with an input of 400 V, drawing 68 Amps, running at 50 Hz and 1480 rpm. Di ...

380V; Motor: 4000W; Max. Flow: 14L/min; Max. pressure: 200 Bar; Max. intel water temp: 50 degrees; Power cable length: 3M; Automatic stop; Filter; High-pressure hose 10M; Spray nozzle 5759 Auction-ID: A1-46416-362

420 cc engine Rated pressure of 4400 PSI Nominal pressure 303 bar 4.0 GPM rated current 4 spray nozzles 1 soap nozzle 15.24M Braided High Pressure Hose 33 cm Never Flat tyres Unused. Auction-ID: A1-40256-87

Includes extra connection piece, hose on roll, air hose. Auction-ID: A1-45771-55

crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-46416-347

380V; Motor: 4000W; Max. Flow: 14L/min; Max. pressure: 200 Bar; Max. intel water temp: 50 degrees; Power cable length: 3M; Automatic stop; Filter; High-pressure hose 10M; Spray nozzle 5759 Auction-ID: A1-46416-361

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46416-525

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-46416-405

Immediately deployable. Viewing by appointment. Auction-ID: A1-40256-2209

Immediately deployable. Viewing by appointment. Auction-ID: A1-40256-2208

well functioning, equipped with: pin 35mm tension, mechanical support leg, control box, stabbing pick-up, Trelleborg 600/55-26.5 tires, foil wrapper, output with support wheel, LED lighting, lubrication system, Auction-ID: A1-40138-41

Equipped with: Hour position: 339 hours, turntable, extraction, pressure vessel, doors over the full width 1780 mm and depth 1800 mm of the cabin, with hatches in the doors for long objects; Turntable ø 1500mm, on rails, can be driven out of the cabin, external blast pot with automatic recovery (recycling system). Large size extraction, type: SO-250p, motor power: 4.0 Kw; sound attenuation on exhaust; with speed control and automatic filter cleaning; Cyclone pre-separator. including 3-fold LED lighting. The Sant-Tech PK-180 blasting cabinet set (year of construction 2020) consists of a cabin (±1.5–1.8 m wide, 0.8–1.0 m deep, 1.9–2.0 m high, ±800 kg) with 230V supply, air consumption ±12,000 l/min and working pressure 2–8 bar, combined with a ZO-250P extraction (400V, 4 kW, 4–6 bar, ±250 kg, approx. 0.8–1.0 × 0.8–1.0 × 2.0–2.3 m) and a 40-litre pressure vessel (wor ...

Temperature range max.: 140 °c; capacity: 900 l/hr; diesel-fired: yes; power: 7.3 kW; connection: 400 V; unused in wooden box; 4496; Auction-ID: A1-46416-241

Bottles for decoration only. Zummo orange press machine with bottle rack. Immediately deployable. Viewing by appointment. Auction-ID: A1-40256-2206

UMT AC770-19 | 19 Liter High Pressure Compressor is a professional, robust high pressure compressor with a capacity of 19 liters, designed for demanding applications in industry, workshop or garage. This compressor offers an excellent balance of power, capacity, and ease of use, making it ideal for applying pressure for paintwork, pneumatic tools, and cleaning operations. Capacity: 19 liter reservoir for continuous and stable pressure delivery. Construction: Strong, durable housing with high-quality materials for long-lasting use. Motor: Powerful motor that comes up to pressure quickly and is suitable for intensive use. Pressure level: Suitable for high-pressure applications, with a maximum working pressure that meets industry standards. Ease of use: Easy operation, with pressure control and safe pressure release valve. Mobility: Compact and portable design, ideal for use in a variety o ...

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46416-526

Security saw does not work. Workbench/support workbench dimensions: 155x68x101 cm. Warehouse trolley with vice dimensions: 128x69x98 cm Auction-ID: A1-41996-108

Spotting press from the manufacturer Rice , type TOS 160-100 . Manufacturer: Rice Type: TOS 160-100 Nominal force: 1000 kN Table length: 1800 mm Table width: 1550 mm Table travel: 2000 mm Installation height: 1800 mm Auction-ID: A7-46802-46

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46416-523

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-46416-404

Temperature range max.: 140 °c; capacity: 900 l/hr; diesel-fired: yes; power: 7.3 kW; connection: 400 V; unused in wooden box; 4496; Auction-ID: A1-46416-242

Immediately deployable. Viewing by appointment. Auction-ID: A1-40256-2207

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46416-524

crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-46416-346

Technical data Machine Type: Edge press with automatic feeding, manual gluing process Application: Woodworking / Door production Max. working area: 2930 x 1330 mm Min. working area: 950 x 500 mm Guideline clocking: 20-30 sec. Installation: roofed, in production hall Configuration Loading: automatic separation and feeding of panels Workpiece length: 300 – 2,500 mm Workpiece width: 300 – 1,300 mm Workpiece thickness: 25 – 65 mm Stacking height: max. 1,600 mm Working height: 950 mm +/- 20 mm Cycle capacity: approx. 1 part/minute Max. workpiece weight: 200 kg Gluing device: BÜHNEN GmbH & Co. KG Type: M101104220 HB 6100-2 CONNECT P110 Outputs: 2 Ser.-No.: 2F002318 Auction-ID: A1-46310-1155

With patented MULTIFORCE hub connection system!, The punching press automatically adjusts the cutting force to the size of the punch tool., It does not matter how resistant or thick the material to be cut is., Cutting table: 1,000 x 500 mm, Reach: 370 mm, Maximum cutting capacity: 25 t – 245 kN, Dimensions: 1.000 x 1.140 x 1.710, Net weight (with oil): 1.020 kg

pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - tool weight max.:100000 kg - number of T-slots:12 - distance between T-slots:375 mm - height above floor level:390 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - number of T-slots:12 - distance between T-slots:375 mm - stroke:2900 mm - tool weight max.:50000 kg RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:180 mm/s - working velocity max.:50 mm/s - restoring force of ram:95 to TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage be ...

pressure:800 t distance between columns:2900 mm stroke:350 mm Controls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 to PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mm RAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):2560 mm ...

pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...

pressure:6 t stroke:1020 mm total power requirement:3,5 kW Can only adjust between tips Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

Total force (nominal):800 to Clamping surface (left-right):x mm Clamping surface (front-back):x mm table surface area:3200 X 2200 mm Total force (nominal):2-3-4-5- Presse - 600 to. to table surface area:2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface an ...

pressure:40 t throat:220 mm stroke:8 / 88 mm table pass:ø- abgesetzt 225/200 mm ram head dimension:400 x 250 mm distance table/ram:228 mm stroke adjustable from - to:30 - 140 mm ram adjustment:63 mm thickness of bolster:80 mm no. of strokes:70 Hub/min total power requirement:5,5 kW weight of the machine ca.:2600 kg dimensions of the machine ca.:1100 x 1300 x 2300 mm Documents:vorhanden

pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden

pressure:160 t throat:370 mm stroke:150 mm total power requirement:45 kW weight of the machine ca.:22 t dimensions of the machine ca.:2,75 x 1,85 x x 4,80 m rules for accident prevention:Vorhanden work table::1500 x 700 mm Documents:vorhanden

pressure:063 t throat:250 mm stroke:8 - 100 mm no. of strokes:56 / 84 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:710 x 500 mm hole in the table:320 mm table height over floor:800 mm passage to the back:320 mm ram surface:450 x 280 mm ram adjustment:63 mm weight:4,1 t dimensions (W x D x H):1,35 x 2,0 x 2,6 m overload protection in ram:mechanical

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:52,0 kW weight:33,0 t Dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary