big lathe used for sale

6 loading meter needed for transport, tooling in Turret not included no tooling included Auction-ID: A1-48649-21

Conventional lead and tension spindle lathe from the German manufacturer Heidenreich & Harbeck (VDF), Hamburg, classic toolmaker lathe with hardened bed and mechanical feed and thread cutting gear. The machine is equipped with a Multifix quick-change holder (type B) and has a wide range of accessories including tool cabinet and turning holder package. Electrics: Operating voltage: 380 V Control current: 220 V Frequency: 50 Hz Total current: approx. 4 A Equipment: Multifix quick-change holder type B several rotary holders and drill holders Forkardt 3-jaw chuck Ø200 mm Tooling tool cabinet classic VDF feed and threaded gearbox Auction-ID: A7-49942-600

turning diameter over bed: 2500 mm turning diameter over slide: 1800 mm turning length: 25000 mm centre height: 1250 mm Werkstückgewicht max. ohne Lünette: 70000 kg spindle diameter in front bearing: 500 mm spindle turning speed range: 0,45 - 90 U/min faceplate diameter: 2480 mm longitudinal feeds:: 0,125 - 48 mm/U rapid traverse of slide: 3000 mm/min metrical thread cutting: 1 - 22 mm/U threading WHITWORTH: 2 - 23 G/ Control: Siemens 840 main drive motor: 80 kW total power requirement: kW weight of the machine ca.: 146,5 t dimensions of the machine ca.: 17,3 x 4,9 x 2,5 m Upgraded in 2007 - Siemens 840D CNC control system - Faceplate - Support - Columnes - 4-way bed configuration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 4000 mm turning diameter over slide rest: 3500 mm turning length: 30000 mm centre height: 2000 mm workpiece weight: 160 t bed width: - mm bed height over floor: - spindle turning speed range: 0,5 - 80 U/min main drive motor: - kW faceplate diameter: - mm Control: Siemens 840D total power requirement: - kVA weight of the machine ca.: 160 t 2006 modernized/Overhauled and equipped with: - 4-guides bedway - CNC Control Siemens 840D - Face Plate - Counter Stay The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various Tool Quick Couplers, PARAT, WDR 4 , WDL4, WD4, WB4 , Price per quantity on request

Manufacturer: Microcut Model: BNC-2240X Type of machine: Semi-CNC Lathe Year of manufacture: 2005 Condition: Good Technical Data - Accessories: Several tool holders are included - Main voltage: 220 Volt - Frequency: 50 Hz - Main motor power: 11 kW - Other motor power: 7.0 kW - Total power: Approximately 18 kW - Amperage: 28 Amps, 14 Amps, and 42 Amps

Max. swing over bed: 615mm, max. swing over cross slide: 345mm, distance between centers: 3000mm, spindle bore: 70mm, spindle taper: MT5, forward speed steps: 18, forward speed range: 14-750rpm, reverse speed steps: 9, reverse speed range: 21-857rpm, standard longitudinal feed: 32 steps, 0.1-1.42mm/rev, standard cross feed: 32 steps, 0.03-0.46mm/rev, fine longitudinal feed: 8 steps, 0.048-0.089mm/rev, fine cross feed: 8 steps, 0.015-0.028mm/rev, coarse longitudinal feed: 32 steps, 1.52-2.28mm/rev, coarse cross feed: 32 steps, 0.48-7.2mm/rev, rapid traverse longitudinal: 6m/min, rapid traverse cross: 2m/min, metric threads: 54, range: 1-240mm, Whitworth threads: 37, range: 1-28threads/inch, compound slide travel: 230mm, cross slide travel: 400mm, distance from spindle center to tool holder: 32mm, tool dimensions: 30x30mm, tailstock quill diameter: 100mm, tailstock taper: MT5, quill travel ...

Swing over bed: 540mm, swing over carriage: 280mm, max. cross slide travel: approx. 410mm, max. compound slide travel: approx. 140mm, tailstock quill travel: 225mm, main spindle speed steps: 24, spindle speed: 9-1400rpm, 32 longitudinal feeds: 0.063-2.24mm/rev, 32 cross feeds: 0.032-1.12mm/rev, metric thread pitch: 0.25-560mm, module threads: module 0.1-50, diametral pitch threads: pitch 160-0.5, center height above flat guideway: 265mm, center height above top of V-way: 247mm, bed width: 403mm, main spindle with spindle nose according to DIN 55022: size 11, spindle bore: 103mm, internal taper: 1:20, largest diameter: 109mm, Morse taper of centers: No. 5, leadscrew pitch, standard: 12mm, tailstock quill diameter: 80mm, standard drive power: 18.5kW, rated speed of drive flange motor: 1400rpm, turning tool cross-section according to DIN 770: 25x25mm, max. faceplate diameter: 500mm, max. th ...

Speed range 48 – 1660 rpm by means of a variator Turning length between centers 700 mm. Swivel head Rohm 140 mm with inner and outer jaws. With pedestrian center and a 16 mm drill chuck with interchangeable gears for thread cutting. With automatic along and cross-slide. With thermal protection. Auction-ID: A1-48994-36

Key data: 330 mm, 635 mm

Stock No.: 4042 LATHE Manufacturer: COLCHESTER, Type: STUDENT 2500 Serial No.: 307802, Year of manufacture: 2010 Specifications: Turning length 635 mm Center height 165 mm Turning over bed 330 mm Ø Spindle bore 40 mm Ø Spindle speeds 40-2500 rpm Spindle motor power 2.2 kW Accessories:                             Cooling water system                    Multi-Tool Holder                Various Tool Holders 2 pc Centering chuck                      Dimensions: Length: 2200 mm, Height: 1500 mm, Width: 1100 mm, Weight: 800 kg

Professional Industrial Machine (400Volt) 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Face Plate 280mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake removable chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 360 mm Turning diameter over support 220 mm Turning length 1000 mm Turning diameter in the offset 380 mm Speed 70 - 2000 rpm Center height 180 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.8 kW Machine weight approx. 0.65 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-571

Auction-ID: A1-50001-20

Tool monitoring Kadigo + BK Micro. 6 axis including spindle takeover 12 driven tool spindles. 20 fixed tool positions. Passage 42 mm Staff warehouse year 2012 Chip conveyor High-pressure cooling up to 70 bar Conveyor belt discharge finished product. Auction-ID: A1-47360-145

Manufacturer: RAMO Type: Conventional precision parallel lathe Equipment: 3-jaw chuck, longitudinal and transverse carriage, tool turret, tailstock, gearbox and feeds, coolant system. Threads: visible adjustment tables for metric and Whitworth pitches. Remarks: machine on rack, manual controls by handwheels and levers. Visible condition of use. Auction-ID: A1-50001-12

Lathes with: - 4-fold steel holder - 3-jaw chuck 315mm - Centering tip Turning diameter over bed 500 mm Turning diameter over support 320 mm Turning length 2100 mm Center height 250 mm Spindle bore 60 mm Spindle speeds 11 - 2000 rpm Total power requirement 7.0 kW Machine weight approx. 2.9 t Dimensions approx. 4.3 x 1.2 x 1.3 mm Auction-ID: A7-49782-438

Equipped with - 27 mm spindle passage - Adjustable guide tracks - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Attention without digital display Scope of delivery: 3-jaw chuck 100 mm, Interchangeable wheel set, splash guard. Turning diameter over bed 250 mm Turning diameter over support 130 mm Turning length 700 mm Speed 115 - 1620 rpm Tip height 125 mm Spindle bore 27 mm Tailstock quill holder MK 2 Tailstock quill stroke 40 mm Metric threads 0.2 - 3.5 mm Thread - Inch 8 - 56 inch. Thread - Module 0.2 - 12.5 mm Swivel range +/- upper slide 45 ° Connection voltage 400 V Total power requirement 0.75 kW Machine weight approx. 0.15 t Dimensions approx. 1.41 x 0.61 x 0.41 m Condition: never used / new (5) Auction-ID: A7-49782-542

Turning diameter over bed: 400 mm, over face slide 246 mm Lead screw diameter: 32 mm Drive: Electric motor main motor: 7.7 kW. Auction-ID: A7-49604-10

Equipped with automatic and hydraulic chisel support. The longitudinal chisel carriage is controlled by a Motor 380 volt VAR-SPE 0.5 KW that is reversible left and right and with a variable speed for the feed speed. The hydraulic pump is equipped with a Motor 380 volt 0.76 Kw that controls the hydraulic chisel support by means of a sensor that moves along the turning jig and allows the hydraulic turning tool support to move forward or backward. Rotation axis with 9 different speeds. A large and a medium and a small take-away center is included. With emergency stop switch and all three motors thermally protected. Auction-ID: A1-48994-23

Professional lathe 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-498

Manual, 380 volt, motor 2.2 Kw, reversible left and right rotation, With variator for continuous speed 25 - 3000 rpm, with 260 mm turntable and turning center, with head turning device and turning plate of 280 mm for turning up to 960 mm diameter, maximum turning size between the centers 380 x 1300 mm, with various tool rests and position stops. Auction-ID: A1-48994-7

Professional lathe Digital display 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Rotating center punch Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-442

Lead and pull spindle lathe - 4-jaw chuck 200mm - Multifix steel bracket size B - Foot brake - Chip tray Turning diameter over bed 420 mm Turning diameter over support 290 mm Turning length 900 mm Speed 40 - 2000 rpm Tip height 210 mm Spindle bore 38 mm Total power requirement 4.0 KW Machine weight approx. 0.9 t Space requirement approx. 2.4 x 1.1 x 1.3 m Condition: unchecked (6) Auction-ID: A7-49782-499

3-jaw chuck 200mm 4-fold steel holder Turning diameter 350mm Turning diameter via support 210 in offset 500mm Turning length 1000mm Speed 20 - 1400rpm Spindle bore 36mm Motor 2.0 KW Weight 600Kg Dimensions 2.2 x 1.0 x 1.5m Auction-ID: A7-49782-493

Professional Metal Lathe,Gear Cutting Machine - 3-jaw chuck - 4-jaw chuck - Hardened bed sheets - Clamping plate - 4-way chisel holder - Feed protection - Standing and moving bezel - Splash protection wall - Machine light Turning diameter over bed 280 mm Turning diameter over support 158 mm Turning length 600 mm Speed 45 - 2000 rpm Center height 140 mm Spindle bore 26 mm Tailstock quill holder MK 2 Tailstock quill stroke 60 mm Metric threads 0.25 - 2.5 mm Thread - Inch 6 - 96 TPI Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 0.16 t Space requirement approx. 1.26 x 0.58 x 0.60 m Condition: never used / new (5) Auction-ID: A7-49782-526

Sold with IEMCA automatic bar feeder Auction-ID: A1-50001-17

Table lathe with base cabinet 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirement approx. 1.3 x 0.6 x 1.3 m Condition: never used / new (5) Auction-ID: A7-49782-566

3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake removable chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-557

Manufacturer: OKUMA Model: Mac Turn 250 Rated Voltage: 400 V Number of Phases: 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Technical data Manufacturer: BOEHRINGER VDF Type: DUS 560 Year of Make: 1993 Machine number: 1022.3095-03 Center width: approx. 2,000 mm Tip height: 280 mm (Source: Online research) Turning diameter over bed: 570 mm (Source: Online research) Turning diameter over facing slide: 365 mm (Source: Online research) Spindle bore: 62 mm (Source: Online research) Main spindle speed: 3–2,500 min⁻¹ (Source: online research) Tailstock mount: MK 5 (Source: Online research) Quill diameter / stroke: 80 / 190 mm (Source: Online Research) Workpiece weight between tips: max. 1,000 kg (Source: Online Research) Control: Siemens CNC, design not clearly determinable on the basis of the available pictures Configuration Equipment: CNC control panel, tailstock, three-jaw chuck and tool holder system. Operating data according to the display: 627 h 50 min operating time, 248 ...

Guide and tension spindle lathe machine - With photocopying device - 3-jaw chuck 200mm - 2 Mutifix quick-change steel holders - Moving center punch - Machine light - Chip tray Turning diameter over bed 410 mm Turning diameter over support 260 mm Turning length 1000 mm Turning diameter in the offset mm Speed 40 - 2000 rpm Center height 205 mm Spindle bore 50 mm Total power requirement 4.5 KW Machine weight approx. 1.6 t Dimensions approx. 2.4 x 1.3 x 1.5 m Auction-ID: A7-49782-510

X-axis: 330mm, Z-axis: 1650mm, max. swing over bed: 910mm, swing over cross slide: 560mm, distance between centers: 1820mm, standard turning diameter: 450mm, max. turning diameter: 610mm, max. turning length: 1650mm, bar capacity: 184mm, spindle speed: 12-1200rpm, spindle nose: A2-15, spindle bore: 200mm, spindle bearing diameter: 266mm, turret type: T10, square tool height: 32mm, boring bar holder diameter: 65mm, tailstock travel: 1400mm, quill stroke: 200mm, tailstock taper: MT5, tailstock quill diameter: 160mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, jog feed X-axis: 0-1260mm/min, jog feed Z-axis: 0-1260mm/min, spindle motor power: 30/37kW, X-axis servo motor: 4kW, Z-axis servo motor: 7kW, hydraulic pump: 2.2kW, lubrication pump: 0.004kW, coolant pump: 1.1kW, connected load: 52kW, coolant tank capacity: 300l, hydraulic tank capacity: 83l, lubricating oil tank c ...

faceplate diameter: 4000 mm swing diameter: 4600 mm turning height: 2650 mm workpiece weight: 100 t max. torque on the faceplate: 178,4 kNm faceplate speeds from - to: 1,8- 80 U/min feed stepless: 0,1 - 6000 mm/min z-axis: 1500 mm Control: Siemens 880T drive motor: 100 kW ram head dimension: 300 x 300 mm x-axis: R: 2500 / L: 2500 mm y-axis: 2900 mm z-axis: R: 200 / L: 1500 mm ram head dimension: 300 x 300 mm total power requirement: 69 kW weight of the machine ca.: - t dimensions of the machine ca.: 17,5 x 10.5 m - CNC control Siemens 880T - Coolant system - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 2500 mm swing diameter over bed slide: 1400 mm turning length: 6000 mm Distance between centres: 5740 mm centre height: 1250 mm faceplate turning speed range: 4 - 400 U/min rapid traverse:: 200 mm/min faceplate: 2000 mm spindle bore: 200 mm face feeds: 700 mm upper slide-adjustment: 350 mm tailstock quill diameter: 320 mm max. workpiece weight between centres: 40 t Control: Siemens Sinumerik 8 T drive motor: 95,5 kW total power requirement: 125 kW weight of the machine ca.: 43 t dimensions of the machine ca.: 11,5 x 3,5 x 3,5 m Heavy duty high precision horizontal lathe with: - CNC Control Siemens Sinumerik 8T (CNC 6 axes) - 3-way Bed - hydraulic clamping system Rohm - Machine modified with 2000 mm face clamping plate - slide with two working positions - Sauter 4 side tool holder - circular turning unit - tailstock - chip conveyor - Rexroth Hydraulic suitable for both,  ...

SINO Digital Display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 250mm Fixed bezel Quick-change steel holder with 4 pcs steel holder Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Turning diameter in the offset 320 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 38 mm Tailstock quill mount MK 3 Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m Condition: never used / new (5) Auction-ID: A7-49782-500

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Handover: in its current condition as inspected -Condition: Problem with the lead screw -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake removable chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-514

Offer 26312 Technical data: - Largest circulation - Ø over bed 550 mm - via flat slide 310 mm - Turning length approx. 1500 mm - Travels - Z – axis 1600 mm - X – Axis 300 mm - Spindle holder according to DIN - Spindle bore 82 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 150 mm - Spindle speeds 80 - 3500 rpm - Rapid traverses X / Y - Drive 17 kW - with: - CNC control FAGOR - Hydr. Chuck clamping - electr. Handwheels - 8-fold tool station - man. Tailstock - Coolant device - Space requirement approx. W 4400 x H 2100 x D 2300 mm - Weight approx. 4400 kg

Serial number: 0577 Voltage: 400 V Frequency: 50 Hz Tip height: 280 mm Distance between tips: 2000 mm Circulation diameter over bed: 560 mm Circulation diameter over cross slide: 390 mm Rotation diameter in offset: 810 mm Spindle bore: 80 mm Spindle holder: MK 7 Centering tip holder: MK 5 Spindle speed: 20 - 1600 rpm Motor power: 7.5 kW Bed width: 345 mm Bed length: 2650 mm Travel cross slide: 265 mm travel upper slide: 135 mm Travel tailstock: 180 mm Diameter tailstock quill: 75 mm Diameter lead screw: 35 mm Pitch lead screw: 6 mm incl. two-axis digital display, manufacturer EASSON, type: ES-8, as well as three-jaw chuck, diameter: approx. 400 mm with Multifix base holder and tailstock and an additional steady rest and a side cabinet with stock of turning steels, turning steel holders, reducing sleeves and other clamping jaws Reference: Wowi - Lot 40 Auction-ID: A7-49882-188

Technical data Manufacturer: Harrison Type: V460 Serial Number: 4V0160 Year of Make: 2013 Center width: approx. 1400mm Center height: 230 mm (Source: Online research) Circumferential diameter over bed: 460 mm (Source: Online research) Circulation diameter over face slide: 270 mm (Source: Online research) Circumferential diameter in the bed drawer: 730 mm (Source: Online research) Spindle bore: 76 mm (Source: online research) Spindle Nose: D1-8 Camlock (Source: Online Research) Spindle speed: 20–2,000 min⁻¹ Spindle motor: 11 kW (Source: Online research) Tailstock: Quill Ø 95 mm, MK 6 (Source: Online research) Digital display: ACU-RITE 2-axis DRO Connection: 415 V / 3 Ph / 50 Hz / 30 A Configuration Version: Conventional horizontal lathe with variable spindle drive, three-jaw chuck, quick-change tool holder, tailstock, digital display and work li ...

CNC bar-fed lathe, year 2012, CNC 31i. Used machine in good condition. More info & price on IndustrialBuyer.

CNC lathe with driven tools, year 2005, CNC 0i TC. Used machine in good condition. More info & price on IndustrialBuyer.

CNC lathe with driven tools, year 2011, CNC 31i - Model B. Used machine in good condition. More info & price on IndustrialBuyer.

CNC lathe with driven tools, year 2002, CNC MSC501. Used machine in good condition. More info & price on IndustrialBuyer.

CNC bar-fed lathe, year 2007, CNC 18i-TB. Used machine in good condition. More info & price on IndustrialBuyer.

CNC bar-fed lathe, year 2020, CNC TX8i-s. Used machine in good condition. More info & price on IndustrialBuyer.

CNC lathe with driven tools, year 1998, CNC OSP 700 L. Used machine in good condition. More info & price on IndustrialBuyer.

CNC lathe with driven tools, year 2004, CNC 18i - TB. Used machine in good condition. More info & price on IndustrialBuyer.

CNC lathe with driven tools, year 2003, CNC 18 TB. Used machine in good condition. More info & price on IndustrialBuyer.

Bulharian ZMM lathe C11MT/1500

turning diameter:1600 mm turning length:12000 mm control:FAGOR 8050 Used CNC Lathe with FAGOR 8050 and extensive accessories. For further technical data and accessories, pls browse the Appendix. Parallellathe WMW mod. 4 GUIDE-WAYS ¦ CNC: FAGOR 8050 ¦ bed: monolithic ¦ centres height: 800 mm ¦ centres distance: 12000 mm ¦ swing over cross-slide: 1250 mm ¦ turret: automatic 4 positions ¦ tailstock: motorized ¦ tailstock connection: hydraulic ¦ platform: diam. 1000 mm ¦ steady rests: nr.02 ¦ chip conveyor Warranty: none Take advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it.