bider import and used for sale

Direct from meat-free facility. Perfect for making texturised meat-like products as well as petfoods, pizza toppings, ready meal ingredients etc.

ID3399 Bundling device horizontal and vertical year/Baujahr 1983/1994 Horizontal and vertical bundling unit, horizontal Ridder (built in 1994), vertical Signode (year of manufacture 1983) Horizontal and vertical strapping, horizontal Ridder (built in 1994), vertical Signode (built in 1983)

Amrit Cook and Quench 2017, Stainless, Four tank washing line with cook and quench system, previously used for cooking 500Kg Chickpeas per batch, consists of four washing tanks, elevator conveyor, cook and quench system, discharge table, 3Ph

pressure: 1000 kg workpiece length - max.: 6500 mm weight of the machine ca.: 600 t dimensions of the machine ca.: 120x30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Makfil Andromeda 2001 + tool inserts Find more here - / Contact us at -

2017 Andritz KMPT GmbH DCF312 / 16 / 4 Andritz - Dynamic membrane filtration Dynamic Crossflow Filter cpl. with control unit Model: DCF312 / 16 / 4 Manufacturer: Andritz KMPT GmbH Year of manufacture: 2017 Condition: As good as new Description: Crossflow processes are used to separate substances that are difficult to filter. In this process, rotating ceramic discs (alternatively: polymer) generate a turbulent differential velocity. With dynamic crossflow filtration, a high degree of separation can be realised, especially with a concentration of the retentate of up to 700 mPas. Ceramic filter discs are available on the market in a wide range of pore sizes from 7 nm to 2 μm. Areas of application: - Colour extraction (e.g. pigments) - Separation of biomass - e.g. in the extraction of enzymes, proteins, proteins, polysaccharides, antibiotics - Recovery of valuable substances -  ...

Indoor agriculture / vertical hydroponic farm, and the machines are associated with these operations. We are talking about leafy vegetables and herbs, to name a few examples: Iceberg lettuce, romaine, basil, mint, coriander, rocket etc. The machines are part of the same solution developed and manufactured by the Taiwanese company YesHealth. The machines are 2 years old. The drying machine has not been in operation for one year. Seeder, 2 kW Harvester, 8 kW Cleaning and drying machine, 20 kW Labelling machine, 300W Find more here - /

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

1996 Theissen and Bonnitz TB 314 QSM 65 Collating machine Hersteller (Manufacturer): Theisen & Bonitz GmbH, Burscheid, Germany Masch.-Typ (Machine Type): TB 314 QSM 65 Baujahr (Year of Manufacture): 1998 U (Voltage): 3~PE 400 V, 50 Hz P (Power): 1.9 kW Find more here - / Contact us at -

Latex coating system by Brückner carpet coating system and laminating system Technical data: Max. Working width: 5200 mm The clamping machine can utilise all reserves can be used up to a clamping width of 5250 mm. Min. working width: 3400 mm for Prage 3500 mm Drive speed: 2 -. 15 m/min. Drive: Direct current motors Operating side: right Colour of the system: RAL 1.015 structure Goods transport system: vertical needle chain Length of one field: 3 m Fans per field: 2 The output of one fan: . Fan power: 7.5 kW Heating systems - per field: 2, separately above and below the web Adjustable air temperature: 50 - 250 .° C Achievable temperature spread: 160 ° at the top, 100 ° at the bottom or top 200 ° , bottom 125 ° Size of the dryer Pre-drying: 5 fields Gelling channel: 3 fields Vulcanising channel: 12 fields Production speed: 9- m/min. with the following data: P ...

Technical Data - Year of Manufacture: 08/2019 - Dimensions (LxWxH): 35x4x5 m - Total Weight: Drying approx. 7 tons, Washing approx. 9 tons - Throughput: approx. 700 kg/h aluminum shavings, approx. 1400 kg/h alloy shavings - Energy Source (Drying): Gas - Energy Source (Washing): Gas - Gas Consumption: approx. 44 m³/h - Electricity Consumption: approx. 37 kWh/h - Dimensions (LxWxH): 35x4x5 m - Electrical Data: - Nominal Voltage: 400 V - Network Frequency: 50 Hz - Control Voltage: 24 V Find more here - / Contact us at -

D'Andrea TA120 Plan Boring Head SK40 S20x2 Cover Fp1 Fp2 Boring Tool Total weight 16.6 kg Lots of accessories, see pictures. Very good used condition. In original wooden crate

One-way operation: Length A 100 mm - 1240 mm Width W 80 mm - 1400 mm Length of window/lining C 60 mm - 720 mm Width of window / lining D 30 mm - 1140 mm Two-lane operation: Length A 100 mm - 1180 mm Width W 80 mm - 660 mm Length of window/lining C 60 mm - 720 mm Width window / lining D 30 mm - 530 mm

VA-10. Residual Gas Compression/Separation Stages (V 671A/B, B670) 3-stage complete system, Type SN, Built: 1990 Incl. necessary equipment, functional, part of the overall system Residual gas compression consisting of pulsation damper B674, separator B670, Tank B673, heat exchanger W672, filter B679, slop tank B675, Gas/liquid separator B661, pipelines Manufacturer: Andreas Hofer Hochdrucktechnik GmbH Technical Data: Steel sheet construction, BMG 5709/968; Find more here - / Contact us at -

amount: 18 STK - for workpiece clamping on lathes, grinding machines and dividing headswith high concentricity and holding force - for workpiece clamping (bar or chuck work) in conventional conventional single-spindle lathes and CNC lathes directly in the spindle the spindle or in the collet chuck - Smooth bores are mainly used in the counter spindle of CNC lathes - Price as a set = 18 pieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

scoring and folding machine for integral covers. Machine for production of integral covers in two steps 1 x Petratto SAB 100 1 x Petratto SC 10 tipo 700 1 x Petratto 90 Belt feeder Antistatic device Side lay Scoring Movable control panel with touch screen Hotmelt gluing Format : 100 x 100 cm - 8 x 8 cm Max. speed : 120 m/min Max. copies/hour: 18 000 Weight : 150 to 500 g

Manufacturer: Heesemann, Type: Bürstenwalze Anderlon, Year: aus MFA 8, Widht of roller coater: 1400/150, Year :aus MFA 8

REF-0 ULMA SLX-305 L-SEALER WITH TR-100 SHRINK TUNNEL Automatic angular L” sealing machine with shrink tunnel. Manufacturer: ULMA. 1) Sealer model SLX 305: − Year: 2020 − Serial no.: 4515898 − 400 V / 50 Hz / 3.5 A / 3PH − Total power: 2.6 kW − Overall dimensions: 2,400 x 1,500 x 1,720 mm (LxWxH) − Maximum sealing bar dimensions (max. package dimensions): 550 x 550 x 200 mm (LxWxH) − This machine can be used not only for packaging with shrink film (when used together with the shrink tunnel), but also with non-shrink film 2) Shrink tunnel model TR 100: − Year: 2020 − Serial no.: 1511748 − 380 V / 50 Hz / 25 A / 3PH − Total power: 24 kW − Overall dimensions: 2,000 x 1,400 x 1,200 mm (LxWxH) − Chamber length: 1,335 mm − Aperture: 400 x 230 mm (WxH) Overall dimensions of the set: 4,000 x 1,500 x 1,720 mm (LxWxH)

Tom Chandley BOMK4MTU3 Oven and proofer Serial: 10837 Stainless, 15.5Kw, Three deck oven with proofer, adjustable temp and timer controls, chamber size 900mm x 700mm x 180mm, stone based, mobile, 3Ph

Andouart extruder

Andreas Schmid Climatic Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Type: VKT 3,000 /-40/+130 Temp. range: -40°C to +130°C Program controller: Stange SE - 502 Mains voltage: 400 V Rated current: 32 A Refrigerant: R 404 A / R 23 Year of Make: 2005 External dimensions: W 1600 x D 800 x H 2430 mm TK-16 More items - new and used - can be found in our shop! International shipping costs on request!

Original Heidelberg Zylinder manual, 0ver 60 years old in almost mint condition. No missing pages, not dirty a true rare find to addf to the missing serial equipment of your machine.

Letterpress numerators, all 9 pieces in working condition: 8 reverse; 1 forward Can ship worldwide.

A used PICK and FEED system from Hundegger, built in mid-2019, very good maintained condition. Available summer 2026, sale as viewed from the FRG location. The system can be demonstrated by appointment. Sale without dismantling by Hundegger.

Double head lathe for milling and turning tubes Automatic (un)loading of workpieces nbsp;

TWIN SCREW EXTRUSION LINE, Top Italian Constructor, for PVC both soft and rigid, max infeed 10-12 mm size, forced feeding hopper, dosing unit, 2 parallel, counter-rotating screws 118 mm diam. 25 L/D, pressure control;, nitrided steel barrel with degassing vent 2,2 kW, Barrel heating bands kW 76,00, Extruder cooling barrel motors power 4x 0,37 kw, n.7 Heating zones, Extruder a.c. motor 120 KW, Extruder tot power 205 kw, Extruder average absorbed power 105,00 kW, Extruder rpm 8-45, Lubrication pump 1,50 kW, Electric cabinet with inverter and modem for remote diagnosis, semi automatic screenchanger for PVC, granulating head, die face dry pelletizer, cooling unit, Installation and start up included (boarding and travel costs on Buyers charge), Total installed power: 205 kw - 105 kw average in use

ZALKIN TM3 Corker

Inspector PI-50 "Sick" model : VSPP-5F2113 : White Lens: 10 mm, S-mount Working distance: ? 50 mm Sensor resolution: 640 px x 480 px Sensor

Like NEW! Never used Inductive hardening machine for bolts M8 and M10 with year of manufacture 2019 The equipment is designed for automatic inductive hardening of screws and bolts M8 and M10. The plant was built by the company Grimm Zuführtechnik. It is designed for approx. 70-80 parts per minute (depending on the component) and has various monitoring options (temperatures, component heights, component types, rotation, etc.). The components are conveyed from a hopper belt via a steep conveyor to a linear sorter and from there are separated and transferred to an 8-station indexing table with 2 nests per station. A 50kW HF generator from IDEA is connected, which provides further monitoring (energy quantity, earth fault monitoring, flow quantity and water temperature of the inductor, etc.). The plant has its own tank for quenching water, from which the components are transported out  ...

Technical Conditions - Application: Outdoor, temperature range –10°C to +40°C, weather-protected - Operation: 8 hrs/day, 1-shift (06:00–18:00) - Material: Pre-sorted KVA (waste incineration slag), 0–500 mm, mixed with wood, plastics, metals, dry - Capacity: ~5 t/h (max. 10,000 t/year) - Foundation: Concrete floor with steel structure Main Components - Feed Bunker with Vibrating Feeder (SFLU 800-2505000) - Input: KVA slag, up to 500 mm - Capacity: 5.0 t/h - Wear-resistant lining (similar to Hardox 400) - Weight: ~5,000 kg - Belt Conveyor FB 1,000 RB (3,000 mm) - Incl. magnetic separator integration - Permanent Overband Magnet Separator (IMP Z-120) - Removes ferrous metals - Sorting Belt Conveyor FB 1,000 RB (6,500 mm) - With hand-sorting section - Belt Conveyor FB 1,000 RB (4,000 mm, swivel type) - Swivelling discharge, manual adjustment - Steel Sorting Platform / Wal ...

ROBOTS FOR HIGH PRESURE DEMOLITION PUMPS IN GREAT CONDITION. ROBOT CONJET 363, 322 , AND JETFRAME SYSTEMS 102

Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - / Contact us at -

Two-Stage Plastic Shredding and Granulation System for Sale A two-stage plastic shredding and granulation system, including control and automation (Siemens S7-300 with visualization), is available for sale. The system is designed for efficient shredding and granulating of various plastic materials. System Components Feed Conveyor - 1 m wide conveyor with integrated metal detector - Configured as a pivoting conveyor for discharge HOSOKAWA Dura Line 140/60 Single-Shaft Shredder - Working width: 1400 mm - Drive power: 140 kW - Suitable for coarse shredding of a wide range of plastic materials Trough Screw and Screw Conveyor - For continuous material transfer from the shredder to the granulator Rotoplex Granulator Ro 80/50 - Drive power: 75 kW - Designed for fine granulation and consistent particle size Granule Extraction and Piping System - Includes cyclone and ZRS for efficien ...

amount: 1 STK Tool holder These chucks are designed for high-speed machining. These are precision tools from the Italian company DAndrea The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU441W1454 LocationBarneveld MakeAndritz Separation GmbH TypeSE 630/60 CRD No.400465015 Year of construction2021 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface35.6 m2 Specified Features - Filterpress Filter presscheck Filter surface35,6 m² Number of platens60 Internal platen sizes530x530 mm External platen sizes630x630 mm Platen thickness50 mm Frame thickness12 mm (2x) Cake capacity393l Central inletcheck Hydraulic closingcheck With hydraulic unitcheck Motor1,5kW, 400V, 1445rpm Automatic openingcheck MaterialPolypropylene Information With switchgearcheck Total height2,2 m Weight3560kg CEcheck Floorspace5,5x1,7mFilterpressesAndritz SeparationFilters > FilterpressesBrand > Andritz Separation What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready ...

General SKU337T903 LocationBarneveld MakeKMPT process technology TypeHZ 100/1.6 Si No.60000886 Year of construction2007 Main Features MaterialStainless steel Motor37 KW Inlet diameter65 mm Specified Features - Peeling centrifuge Peeler centrifugesyphon type Capacitynett: 157,5 Ltr. Basket sizesDia: 1250x700 mm Wall thickness20 mm Max. loading weight308 kg Motor37 kW, 400v, 1470 rpm, (ex) Max. basket speed1520 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck InletDN 65 Solids outletDN 250 Liquid outletDN 125, DN 50 MaterialStainless steel 1.4404 (316L), Stainless steel 1.4462 (Duplex2205) Information Mounted on framecheck Total height3,5 m Weight5760 CEcheck Floorspace5,35x4,5 m ATEX compatiblecheckPeeling centrifugesAndritz KMPTCentrifuges > Peeling centrifugesBrand > Andritz KMPT What you can expect from Foeth: -- Machine is in work ...

General SKU441W1453 LocationBarneveld MakeAndritz Separation GmbH TypeSE 630/60 CRD No.400465014 Year of construction2021 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface35.6 m2 Specified Features - Filterpress Filter presscheck Filter surface35.6 m² Recessed chamber platescheck Number of platens60 Internal platen sizes530x530 mm External platen sizes630x630 mm Platen thickness50 mm Frame thickness12 mm (2x) Cake capacity393l Central inletcheck Hydraulic closingcheck With hydraulic unitcheck Motor1,5kW, 400V, 1445rpm Automatic openingcheck MaterialPolypropylene Information With switchgearcheck Total height2,2 m Weight3560kg CEcheck Floorspace5,5x1,7mFilterpressesAndritz SeparationFilters > FilterpressesBrand > Andritz Separation What you can expect from Foeth: -- Machine is in working condition -- At a reduced  ...

General SKUCX001 LocationBarneveld MakeTartler TypeNodupur VSAR A/B Vakuum No.#2123 Year of construction2012 Pressure Working pressure0.05 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor7.5 KW Specified Features - Hot mixer Hot/Cold mixercheck Hot mixercheck Vessel sizes200 l & 100 l With jacketelectrical traced Max. temperature50°C With motorcheck With variable speed drivecheck MaterialStainless steel 1.4306 (304L) Information Mounted on framecheck Mounted on wheelscheck Total height1,8 m Weight2500 kg CEcheck With switchgearcheck Floorspace1,6 x 1,9 m Extra Specifications- Two component mixing and dosing systems consisting of:  :  : - 200 litre vessel (electrical traced) with stirrer  :  : - 100 litre vessel (electrical traced) with stirrer  :  : - Siemens SPS 7 control system  :  : - 2 lobbe pumps  :  : - static mixer  : : : ...

General SKU293X396 LocationBarneveld MakePall Life Science TypeLevmixer and magnetic mixer tank No.SVE220038 Year of construction2022 Pressure Working pressure6.2 Bar Main Features MaterialStainless steel Volume650 Ltr. Motor0.18 KW Specified Features - Stirring vessel MaterialStainless steel 1.4306 (304L) Open stirring vesselcheck Capacity650 l. Vessel sizesDisposable bags 650 l. Max. temperature-5°C/+90°C With propellor stirrercheck Magnet mixer Motor0,18 kW, 220-240 volt Speed mixing shaftVariable Information Mounted on legsOn wheels With switchcheck Weight500 kg CEcheck Floorspace1,70x1,20 m Total height1,55 m Extra SpecificationsWith Minebea Intec weighing cells, type Midrics 2, : 2x input hoses, 2x disposable bags 650 l. Stirring vesselsPall life scienceStirring vessels > Stirring vesselsBrand > Pall life science What you can expect from Foeth: -- M ...

General SKU387X972 LocationBarneveld MakeGuinard Centrifugation TypeD4LLC30BHP No.2783 Year of construction2000 Main Features MaterialStainless steel Capacity12000 Ltr./Hr. Motor45 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Screw diameter430 mm Screw length2029 mm InletDN50 Liquid outletDN200 Solids outletcheck Motor45 kW, 400 volt, 1480 rpm With variable speed drivecheckfrequency controller Max. rotor speed3500 rpm MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 (316L) Information Mounted on foundation platecheck With switchgearcheck (as is) Total height1,50 m Weight3500 kg CEcheck Floorspace3,80x1,00 m Extra SpecificationsNominal speed 3200 rpm, max speed 3500 rpm, max sludge density 1,2 kg/dm³, variable relative speed 0-15 rpm. min/max temperature -30°C/+90°C schnecke motor, 15 kW, 380 volt, 1455 rpm DecantersAnd ...

Manufacturer: Andritz Model: CP 3044 SDC2 Year of Manufacture: 2010 Machine type: Industrial drum / centrifuge (model CB series) Max drum speed: 3500 rpm Operating speed: 3500 rpm Drum inner diameter: 444 mm Drum wall thickness: 11.8 mm Drum volume: 142.6 liters Max filling volume: 174.4 liters Bulk density: 1.5 kg/dm³ Operating temperature: 50 °C Total weight: 4200 kg Find more here - / Contact us at -

Manufacturer: Andritz Model: CP 3044 SDC1 Year of Manufacture: 2000 Type: Decanter centrifuge Total weight: 4200 kg Technical data: - Max drum speed: 3500 rpm - Max operating speed: 3500 rpm - Drum inner diameter: 448 mm - Drum wall thickness: 11.8 mm - Drum material: HZ / ST 02 - Max filling volume: 174.2 liters - Allowed density: 1.5 kg/dm³ - Max operating temperature: 50 °C Find more here - / Contact us at -

System Description Partial automated sorting system for returnable beverage crates and EPS foldable trays. Incoming returnable containers arrive mainly on Euro and half pallets and must be manually unloaded due to mixed crate types. Additional quantities arrive in roll containers. Main Functions - Identification and sorting of various returnable crate types - Deposit value calculation per crate based on pallet barcode - Sorting of bottles into 20-unit and 24-unit module crates - Automatic unpacking of EPS trays with bottles using Inlet systems - Handling of up to 440 crate types - Sorting of standing bottles inside EPS trays with Inlets - Allocation of sorted crates for automated palletizing or manual handling Capacity and Performance - Total annual throughput: 6.5 million crates - Operation: 2 shifts per day, 5 days per week - Average throughput: 1,625 crates per hour - Peak throug ...

Used granulator made by Matador. The device is used for grinding materials. It can be useful in various industrial applications. Capacity 3t/h. Conditioner included. 2 units available: 250 and 315 kW.

Key data: 635 KW

New Mitsubishi Marine Engines. Mitsubishi S6R MPTAW-4 , 635Kw1800rpm auxilairy [ 2022 ] un used. Mitsubishi S6R Z3 MPTAW-4 , 635Kw1800rpm auxilairy [ 2019 ] un used. Mitsubishi S16R-2 T2 MPTAW-3 , 1450Kw1350rpm propulsion [ 2018 ] unused. All engines have only type approval All engines are unused and stored properly as required by the manufacturer. Manuals and the primary filter set are present. S6R Engines have a Woodard Pro Act and a 2301E control box. S16R-2 is provided with a Woodward PSG governor.

• DataMatrix station for labelling and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation). • Output max. 400 items/min, belt speed 5 - 90 m/min • Data matrix code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Various other readable code types, including Pharmacode • Product run from left to right • Product transfer by alignment belt, consisting of lower (600 mm long) and height-adjustable upper belt (400 mm long) • Ejection belt 300 mm long • Product height max. 150 mm, product width 45 - 130 mm • Bad product ejection by pneumatic pusher with collecting container • Ejection countercheck • Central height adjustment for printer and camera • Light barrier for product detection (trigger) • 1 LAN PCE camera Mini-Smart, plain text/code control 6.217 • 3 installation positions for camera: front (as-i ...

• DataMatrix station for marking and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation) • Output max. 400 objects/min, belt speed 5 - 90 m/min • Datamatrix-code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Several other readable codes, a.o. pharmacode • Operation direction from left to right • Product take over by alignment belt, consist of lower (length 500 mm) and height adjustable top belt (length 400 mm) • Discharge belt length 500 mm • Product height max. 100 mm (optional 150 mm), product width 45 - 200 mm, max. product width incl. open flaps 240 mm • Bad ejection by blower nozzle with collection container • Ejection counter control • Central height adjustment for printer and camera • Light barrier for product identification (Trigger) • 1 LAN PCE camera Mini-smart, plain text/code control  ...

Bij het mengen van vloeistoffen spreken we van homogenisatie of blending wanneer twee niet (volledig) gelijke vloeistoffen worden gemengd met als doel een homogeen mengsel te verkrijgen. De moleculen van de ene stof worden dan volledig gelijkmatig verdeeld in de andere stof en concentratie- en temperatuurverschillen worden volledig geëgaliseerd. Bij dit proces is de mengtijd van belang, dat wil zeggen de tijd die nodig is om de concentratie- of temperatuurverschillen tot een bepaald niveau te reduceren.

Used Centrifuge Speed: 3500 rpm Drum inner diameter: 448 mm Drum wall thickness: 11 mm Material: Steel permissible. Density: 1.50kg/dm³ Total weight: 4300 kg Stated price of 10,500 € in unrepaired condition, 24,500 € net in overhauled condition